Creation of Substations alongwith Laying of HT/LT Network and Augumentation of Sub satations at various locations in Mandali Block demanded in the Memorandum from Mrs. Reeta Devi, Mandali (BDC Chairperson) on Turnkey Basis.

Amount

Creation of 63KVA Sub Station alongwith laying of HT/LT Line at Lower Dungara

Creation of 63 KVA Sub Station on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

11/0.433kV, 63 KVA, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2, (Al wound ), and with LV Cable Box having detachable Aluminium Gland plate.

Gapless Surge Arrestor,9 kV ,10 KA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

70 mm² (1Ckt) Single Phase Cable,1.1K V Grade, PVC Insulated Stranded Conductor FRLS type

9 Mtr. Long ST Pole (ST-410 SP-33)

11KV Polymeric composite Disc Insulator 12kV,min failing load 45KN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lightening Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

GI Channel/Angle/Flat of sizes including clamps

Galvinized Nuts and Bolts.

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

Pre fabricated LT Distribution switch

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Danger Plates with Clamps

Cement Bottoming 1:2:4 mix as per REC Standards

Sundary Items

GI Barbed wire for anti climbing

Laying of HT line on 9 Mtrs. ST poles with ACSR Weasel Conductor on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

9 Mtr. Long ST Pole(ST-410 SP -33 )

11 Mtr. Long ST Pole(ST-410 SP -56 )

GI V cross-arm with top Bracket including clamp

GI Channel x-arm including clamps and braces

30 mm² ACSR Conductor ( Weasel)

PG Clamps for Weasel Conductor

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Danger Plates with Clamp

Anti Climbing Devices with clamps

Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip

Red oxcide Paint

Aluminium Paints

Cement Bottoming 1:2:4 mix as per REC Standrad 0.5 CUM per pole

Aluminium Jointing Sleeves

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Laying of LT line on 8 Mtrs.ST poles with ACSR Weasel Conductor 3 Phase 4 wire on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

8 Mtr. Long Pole(ST-410 SP-15 )

GI U-Clamp for Shackle insulators

30 mm² ACSR Conductor weasel

16 KN Polymer Shackle insulators

Galvanized Nuts and Bolts

Danger Plates with Clamp

Anti climbing Devices with Clamp

Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip

Red oxcide Paint

Aluminium Paints

Aluminium Jointing Sleeves

LT line Spacers

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Laying of LT line on 8 Mtrs.ST poles with ACSR Weasel Conductor 1 Phase 2 wire on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

8 Mtr. Long Pole(ST-410 SP-15 )

GI U-Clamp for Shackle insulators

30 mm² ACSR Conductor weasel

16 KN Polymer Shackle insulators

Galvanized Nuts and Bolts

Danger Plates with Clamp

Anti climbing Devices with Clamp

Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip

Red oxcide Paint

Aluminium Paints

Aluminium Jointing Sleeves

LT line Spacers

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Creation of 25 KVA Sub Station alongwith laying of HT/LT Line at Upper Dungara

Creation of 25 KVA Sub Station on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

11/0.433kV, 25 KVA, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2, (Al wound ), and with LV Cable Box having detachable Aluminium Gland plate.

Gapless Surge Arrestor,9 kV ,10 KA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

50 mm² (1Ckt) Single Phase Cable,1.1K V Grade, PVC Insulated Stranded Conductor FRLS type

9 Mtr. Long Pole (ST-410-SP33)

11KV Polymeric composite Disc Insulator 12kV,min failing load 45KN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lightening Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

GI Channel/Angle/Flat of sizes including clamps

Galvinized Nuts and Bolts.

Cement Bottoming 1:2:4 mix as per REC Standards

Earthing of substation-Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

Pre fabricated LT Distribution switch

Danger Plates with Clamps

Sundary Items

GI Barbed wire for anti climbing

Laying of HT line on 9 Mtrs. ST poles with ACSR Weasel Conductor on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

9 Mtr. Long ST Pole(ST-410 SP -33 )

11 Mtr. Long ST Pole(ST-410 SP -56 )

GI V cross-arm with top Bracket including clamp

GI Channel x-arm including clamps and braces

30 mm² ACSR Conductor ( Weasel)

PG Clamps for Weasel Conductor

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Danger Plates with Clamp

Anti Climbing Devices with clamps

Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip

Red oxcide Paint

Aluminium Paints

Cement Bottoming 1:2:4 mix as per REC Standrad 0.5 CUM per pole

Aluminium Jointing Sleeves

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Laying of LT line on 8 Mtrs.ST poles with ACSR Weasel Conductor 3 Phase 4 wire on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

8 Mtr. Long Pole(ST-410 SP-15 )

GI U-Clamp for Shackle insulators

30 mm² ACSR Conductor weasel

16 KN Polymer Shackle insulators

Galvanized Nuts and Bolts

Danger Plates with Clamp

Anti climbing Devices with Clamp

Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip

Red oxcide Paint

Aluminium Paints

Aluminium Jointing Sleeves

LT line Spacers

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Laying of LT line on 8 Mtrs.ST poles with ACSR Weasel Conductor 1 Phase 2 wire on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

8 Mtr. Long Pole(ST-410 SP-15 )

GI U-Clamp for Shackle insulators

30 mm² ACSR Conductor weasel

16 KN Polymer Shackle insulators

Galvanized Nuts and Bolts

Danger Plates with Clamp

Anti climbing Devices with Clamp

Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip

Red oxcide Paint

Aluminium Paints

Aluminium Jointing Sleeves

LT line Spacers

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Creation of 63KVA Sub Station alongwith laying of HT/LT Line at Durang

Creation of 63 KVA Sub Station on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

11/0.433kV, 63 KVA, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2, (Al wound ), and with LV Cable Box having detachable Aluminium Gland plate.

Gapless Surge Arrestor,9 kV ,10 KA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

70 mm² (1Ckt) Single Phase Cable,1.1K V Grade, PVC Insulated Stranded Conductor FRLS type

9 Mtr. Long ST Pole (ST-410 SP-33)

11KV Polymeric composite Disc Insulator 12kV,min failing load 45KN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lightening Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

GI Channel/Angle/Flat of sizes including clamps

Galvinized Nuts and Bolts.

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

Pre fabricated LT Distribution switch

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Danger Plates with Clamps

Cement Bottoming 1:2:4 mix as per REC Standards

Sundary Items

GI Barbed wire for anti climbing

Laying of HT line on 9 Mtrs. ST poles with ACSR Weasel Conductor on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

9 Mtr. Long ST Pole(ST-410 SP -33 )

11 Mtr. Long ST Pole(ST-410 SP -56 )

GI V cross-arm with top Bracket including clamp

GI Channel x-arm including clamps and braces

30 mm² ACSR Conductor ( Weasel)

PG Clamps for Weasel Conductor

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Danger Plates with Clamp

Anti Climbing Devices with clamps

Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip

Red oxcide Paint

Aluminium Paints

Cement Bottoming 1:2:4 mix as per REC Standrad 0.5 CUM per pole

Aluminium Jointing Sleeves

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Laying of LT line on 8 Mtrs.ST poles with ACSR Weasel Conductor 3 Phase 4 wire on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

8 Mtr. Long Pole(ST-410 SP-15 )

GI U-Clamp for Shackle insulators

30 mm² ACSR Conductor weasel

16 KN Polymer Shackle insulators

Galvanized Nuts and Bolts

Danger Plates with Clamp

Anti climbing Devices with Clamp

Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip

Red oxcide Paint

Aluminium Paints

Aluminium Jointing Sleeves

LT line Spacers

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Laying of LT line on 8 Mtrs.ST poles with ACSR Weasel Conductor 1 Phase 2 wire on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

8 Mtr. Long Pole(ST-410 SP-15 )

GI U-Clamp for Shackle insulators

30 mm² ACSR Conductor weasel

16 KN Polymer Shackle insulators

Galvanized Nuts and Bolts

Danger Plates with Clamp

Anti climbing Devices with Clamp

Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip

Red oxcide Paint

Aluminium Paints

Aluminium Jointing Sleeves

LT line Spacers

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Creation of 25KVA Sub Station alongwith laying of HT/LT Line at Durang

Creation of 25 KVA Sub Station on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

11/0.433kV, 25 KVA, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2, (Al wound ), and with LV Cable Box having detachable Aluminium Gland plate.

Gapless Surge Arrestor,9 kV ,10 KA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

50 mm² (1Ckt) Single Phase Cable,1.1K V Grade, PVC Insulated Stranded Conductor FRLS type

9 Mtr. Long Pole (ST-410-SP33)

11KV Polymeric composite Disc Insulator 12kV,min failing load 45KN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lightening Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

GI Channel/Angle/Flat of sizes including clamps

Galvinized Nuts and Bolts.

Cement Bottoming 1:2:4 mix as per REC Standards

Earthing of substation-Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

Pre fabricated LT Distribution switch

Danger Plates with Clamps

Sundary Items

GI Barbed wire for anti climbing

Laying of HT line on 9 Mtrs. ST poles with ACSR Weasel Conductor on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

9 Mtr. Long ST Pole(ST-410 SP -33 )

11 Mtr. Long ST Pole(ST-410 SP -56 )

GI V cross-arm with top Bracket including clamp

GI Channel x-arm including clamps and braces

30 mm² ACSR Conductor ( Weasel)

PG Clamps for Weasel Conductor

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Danger Plates with Clamp

Anti Climbing Devices with clamps

Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip

Red oxcide Paint

Aluminium Paints

Cement Bottoming 1:2:4 mix as per REC Standrad 0.5 CUM per pole

Aluminium Jointing Sleeves

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Laying of LT line on 8 Mtrs.ST poles with ACSR Weasel Conductor 3 Phase 4 wire on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

8 Mtr. Long Pole(ST-410 SP-15 )

GI U-Clamp for Shackle insulators

30 mm² ACSR Conductor weasel

16 KN Polymer Shackle insulators

Galvanized Nuts and Bolts

Danger Plates with Clamp

Anti climbing Devices with Clamp

Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip

Red oxcide Paint

Aluminium Paints

Aluminium Jointing Sleeves

LT line Spacers

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Laying of LT line on 8 Mtrs.ST poles with ACSR Weasel Conductor 1 Phase 2 wire on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

8 Mtr. Long Pole(ST-410 SP-15 )

GI U-Clamp for Shackle insulators

30 mm² ACSR Conductor weasel

16 KN Polymer Shackle insulators

Galvanized Nuts and Bolts

Danger Plates with Clamp

Anti climbing Devices with Clamp

Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip

Red oxcide Paint

Aluminium Paints

Aluminium Jointing Sleeves

LT line Spacers

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Augmentation of 63 KVA to 100 KVA sub station (02Nos.) at Rampur

Augumentation of 63KVA to 100KVA sub stations(02Nos.) on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material: (Dismantlled Transformer and allied material shall be returned to Divisional Store at Kathua)

11/0.433 KV 3 Phase Distribution Transformer 100 KVA with Bimetallic Terminal Connector Energy Level-2 Aluminium Wound and with LV Cable box having detachable Aluminium Gland plate(01No. Per stn)

Gapless Surge Arrestor,9 kV ,10 KA ,LA with polymer housing, Stn. Type(01No. Per stn)

GI Channel/Angle/Flat of sizes including clamps (60Kg per stn.)

Earthing of substation-Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover. (03Nos. per stn)

Pre fabricated LT Distribution switch (01 No. per stn)

185 mm² (1Ckt) Single Phase Cable,1.1K V Grade, PVC Insulated Stranded Conductor FRLS type(40Mtr per stn.)

11 kV Horn Gap Fuse Set 3 Phase 200A(01set per stn)

M/S COMBINE GROUP OF ENGINEERS

M/S LUMEN ENGINEERS