Loading…
Loading…
Tender Value
₹31.3 L
EMD Value
₹62,680
Closing Date
11 Jun 2026, 6:00 pm6d left
Executive Engineer
Office of Executive Engineer PHED District Rural Division Ajmer
Open well commisioning work and providing, laying jointing and commisioninig of HDPE main distribution DI pipe lines at village Govindgharh G.P. Govindgharh Tehsil peesangan constituency Nasirabad Ajmer Under DMFT Fund under clause 2 and 3 on Risk an
2026_PHCJA_564527_2
eepheddistrict rual division ajmer nit No 7 and 8
Open Tender
Civil Works
90 days
Ajmer
As per tender document
7 documents required · 7 mandatory
₹500
8745 EE PHED District Rural Division Ajmer
₹62,680
Yes
3 Jun 2026
3 Jun 2026
12 Jun 2026
3 Jun 2026
11 Jun 2026
3 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply & Installation of 3 phase ISI marked submersible motor pump set of five star (if not available then three/ four star whichever higher rating available) rating by BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. | - | - | - | - |
| 2 | 7.5 KW (10 HP) & head up to 120 mtr. | 15 | KW | 6,844 | ₹1,02,660 |
| 3 | Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. The panel should have space for energy meter ( supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18" and double door including in built locking system. The legs should be embedded in M-15 cement concrete plat form. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply. | - | - | - | - |
| 4 | Above 5 HP and up to 10 HP | 2 | Each | 24,273 | ₹48,546 |
| 5 | Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. | - | - | - | - |
| 6 | 16.0 Sq.mm, 4 core | 20 | Mtr | 234 | ₹4,680 |
| 7 | Supply & Fixing of ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980 including making connection etc. | - | - | - | - |
| 8 | 3 core 6.0 Sq.mm | 450 | Mtr | 283 | ₹1,27,350 |
| 9 | Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. | 1 | Each | 3,651 | ₹3,651 |
| 10 | Providing & Lowering in tube well ISI marked GI Pipe medium duty (“B" class), Steel tube as per IS:1239 or amended up to date and zinc coating as per IS 4736, threaded and double flanged (welded) on both ends and two number 25x3mm MS flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect. | - | - | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.80 MB
TD.pdf
Tender Documents • 3.44 MB
BOQ_1004746.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid