SPECIAL REPAIR TO LT PANEL,LT UG CABLE,JUNCTION BOXES,METER COVERS AND CONNECTED ITEMS AT CERTAIN LOCATION AT AFS MADH ISLAND UNDER GE(AF) THANE

Amount

Dismantling and Taking out L.T. under ground armored PVC/XLPE insulated and PVC/XLPE sheathed heavy duty 1100 Volts grade under ground cable of any size complete all as specified and directed.

Taking down GI pipe laying in trenches for UG cable protection of any sizes pipe complete all as specified and as diercted.

Taking out serviceable unreinforced precast concrete cable cover factory made embossed the mark “LT CABLE” class LV type1 flat size 250x150x40 mm during excavation of trenches and relaying after cable laying in trenches all as specified and directed.

Taking down any type any breaking capacity MCCB complete all as specified and as directed.

Taking down any size of LT Pannel from site ,complete all as specified and as directed.

Excavation in trenches n. exc. 1.5 M in width and 1.5 m in depth and getting out in soft/loose soil all as specified and as directed.

Excavation in trenches n. exc. 1.5 M in width and 1.5 M in deep for laying of pipes/cable and getting out in hard /dense soil complete all as specified and directed.

Returning filling in including spreading leveling, watering and well ramming in layers not exe 25 cm each layer complete all as specified and directed.

Removing excavated material n. exc. 50 M away and depositing where directed at a level n. exc. 1.5 M above the starting point all as specified and as directed.

Supply and spreading in trenches clear dry sand for cable protection and punning down gently 10 cm below the cable and 15 cm above the cable all as specified and directed. Note :- Punning thickness only measured.

Supply and laying unreinforced precast concrete cable cover factory made embossed the mark “LT CABLE” class LV type1 ISI marked flat size 250x150x40 mm laid in trenches as specified and as directed.

M&L for cutting existing road/hard standing not exc 50x60 cm in wide & depth getting out excavated material for laying GI tube , for passing through LT cable, returning filling & well rammaing watering finish suraface 10 cm from top using PCC 1:1.5:3; including removal of surplus soil complete all as specified and directed.

Supply and lay in trenches / along the wall / floor pipes GI light grade of size 80 mm with and including all fittings and accessories complete all as specified and and directed for cable protection complete all as specified and directed.

Supply and lay in trenches / along the wall / floor pipes GI light grade of size 40 mm with and including all fittings and accessories for cable protection complete all as specified and directed .

M&L for cable jointing kit in replacement for 1100 volts grade cable for straight through heat shrinkable type joint, complete with and including jointing material and accessories suitable for 3.5 core XLPE armoured aluminium cable of size 25 Sqmm to 50 Sqmm, also with and including connecting single ferrules/thimbles etc after disconnecting of electric supply including burnt out jointing kit etc, complete all as specified and directed

M&L for cable jointing kit in replacement for 1100 volts grade cable for straight through heat shrinkable type joint, complete with and including jointing material and accessories suitable for 3.5 core XLPE armoured aluminium cable of size 70 Sqmm to 95 Sqmm, also with and including connecting single ferrules/thimbles etc after disconnecting of electric supply including burnt out jointing kit etc, complete all as specified and directed

S & F MCCB 415 volts grade with adjustable short circuit and over load of following rating

63 Amps, 16 KA, 3 Pole

100 Amps, 16 KA, 3 Pole

125 Amps, 16 KA, 3Pole

160 Amps, 36 KA, 3 Pole

200 Amps, 36KA, 3 Pole

Supply and lay jointing and testing and commissioning of following size XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed

70 Sqmm 3.5 Core

35 Sqmm 3.5 Core

25 Sqmm 4 Core

16 Sqmm 4 core

Supply, installation, testing and commissioning of LT Feeder Panel in repair of size min 1400 x 1950 x 420 mm suitable for working on 3 phase,4 wire, 415 V, AC, 50HZ,cubical out door type,weather proof,water proof, dust proof, vermin proof, shock proof, CPRI approved made out thermoplastic polycoarbonate sheet to accommodate accessories/fittings with front and back door opening/lockable by the key from both sidewith bus bar chamber and switch gear compartment ,Incoming MCCB and TPN copper bus bar of rating not less 1.5 times the rated current carrying capacity of incomming MCCB and out going feeder, TPN bus bar duly insulated with colour code heat shrinkable sleeves and mounted on DMC/epoxy insulator of size not less than 50x50 mm conical type at an interval of not more than 500mm through out the lenght of TPN bus bar, copper extension link of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of individual feeder to incomming and out going MCCB supported on DMC/Epoxy insulator including provison for termination with incoming and out going cables.Panel mounted on 50x50x5 mm sizeMS angle iron frame duly painted including PCC 1:2:4 type B1(using 20 mm graded stone aggregate) in foundation All extension link/interconnection shall be insulated with heat shrinkable colour coaded sleeves to accomodate and including the following accessories:- (i) Copper bus bar 400 Amps CU INCOMER (ii) 250A 4 Pole 35 KA MCCB-1 No Metering (i) Digital Voltmeter (0-500V)-1 Nos (ii) Digital Ammeter (0-250A)-1 Nos (iii) R/Y/B Indication Lamp 1Set -1 Nos (iv) Current Transformer (200/5A) 3-Nos (v) Control fuse witth base (2/20A)-6 Nos OUTGOING (i) 160A TPN 35 KA MCCB - 2 Nos (ii) 100 TPN 25 KA MCCB - 1 Nos (iii) 63A TPN 25 KA MCB - 4 Nos (iv)32A TPN 25 KA MCB- 2 Nos (iv) 70A TP ML 4 Power contactor- 1 Nos (v) 24 Hrs timer analog type (L&T) - 01 Nos

All per item No 19.00 here in before but to accommodate and including the following accessories: (i) Copper bus bar 400 Amps CU INCOMER (ii) 250A 4 Pole 35 KA MCCB-1 No Metering (i) Digital Voltmeter (0-500V)-1 Nos (ii) Digital Ammeter (0-250A)-1 Nos (iii) R/Y/B Indication Lamp 1Set -1 Nos (iv) Current Transformer (200/5A) 3-Nos (v) Control fuse witth base (2/20A)-6 Nos OUTGOING (i) 63A TPN 25 KA MCCB - 5 Nos (ii) 40A TPN 25 KA MCB - 4 Nos (iii) 70A TP ML 4 Power contactor- 1 Nos (iv) 24 Hrs timer analog type (L&T) - 01 Nos

All per item No 19.00 here in before but to accommodate and including the following accessories: (i) Copper bus bar 200 Amps CU INCOMER (ii) 100A 4 Pole 35 KA MCCB-1 No Metering (i) Digital Voltmeter (0-500V)-1 Nos (ii) Digital Ammeter (0-200A)-1 Nos (iii) R/Y/B Indication Lamp 1Set -1 Nos (iv) Current Transformer (200/5A) 3-Nos (v) Control fuse witth base (2/20A)-6 Nos OUTGOING (i) 63A TPN 25 KA MCCB - 2 Nos (ii) 40A TPN 25 KA MCCB - 2 Nos (iii) 70A TP ML 4 Power contactor- 1 Nos (iv) 24 Hrs timer analog type (L&T) - 01 Nos

All per item No 19.00 here in before but to accommodate and including the following accessories: (i) Copper bus bar 400 Amps CU INCOMER (ii) 200A 4 Pole 35 KA MCCB-1 No Metering (i) Digital Voltmeter (0-500V)-1 Nos (ii) Digital Ammeter (0-200A)-1 Nos (iii) R/Y/B Indication Lamp 1Set -1 Nos (iv) Current Transformer (200/5A) 3-Nos (v) Control fuse witth base (2/20A)-6 Nos OUTGOING (i) 100A TPN 25 KA MCCB - 3 Nos (ii) 63A TPN 25 KA MCCB - 3 Nos (iii) 40A TPN 25 KA MCB - 4 Nos (iv) 32A SPN 25 KA MCB - 2 Nos (v) 70A TP ML 4 Power contactor- 1 Nos (vi) 24 Hrs timer analog type (L&T) - 01 Nos

All per item No19.00 here in before but to accommodate and including the following accessories: (i) Copper bus bar 400 Amps CU INCOMER (ii) 200A 4 Pole 35 KA MCCB-1 No Metering (i) Digital Voltmeter (0-500V)-1 Nos (ii) Digital Ammeter (0-200A)-1 Nos (iii) R/Y/B Indication Lamp 1Set -1 Nos (iv) Current Transformer (200/5A) 3-Nos (v) Control fuse witth base (2/20A)-6 Nos OUTGOING (i) 100A TPN 25 KA MCCB - 2 Nos (ii) 63A TPN 25 KA MCCB - 2 Nos (iii) 40A TPN 25 KA MCB - 3 Nos (iv) 32A SPN 25 KA MCB - 2 Nos (v) 70A TP ML 4 Power contactor- 1 Nos (vi) 24 Hrs timer analog type (L&T) - 01 Nos

All per item No 19.00 here in before but to accommodate and including the following accessories: (i) Copper bus bar 400 Amps CU INCOMER (ii) 200A 4 Pole 35 KA MCCB-1 No Metering (i) Digital Voltmeter (0-500V)-1 Nos (ii) Digital Ammeter (0-200A)-1 Nos (iii) R/Y/B Indication Lamp 1Set -1 Nos (iv) Current Transformer (200/5A) 3-Nos (v) Control fuse witth base (2/20A)-6 Nos OUTGOING (i) 63A TPN 25 KA MCCB - 5 Nos (ii) 40A TPN 25 KA MCB - 3 Nos (iii) 32A SPN 25 KA MCB - 2 Nos (iv) 70A TP ML 4 Power contactor- 1 Nos (v) 24 Hrs timer analog type (L&T) - 01 Nos

All per item No 19.00 here in before but size min 2300x1950x420mm to accommodate and including the following accessories: (i) Copper bus bar 400 Amps CU INCOMER (ii) 250A 4 Pole 35 KA MCCB-1 No Metering (i) Digital Voltmeter (0-500V)-1 Nos (ii) Digital Ammeter (0-250A)-1 Nos (iii) R/Y/B Indication Lamp 1Set -1 Nos (iv) Current Transformer (200/5A) 3-Nos (v) Control fuse witth base (2/20A)-6 Nos OUTGOING (i) 63A TPN 25 KA MCCB - 11 Nos (ii) 40A TPN 25 KA MCB - 4 Nos (iii) 70A TP ML 4 Power contactor- 1 Nos (iv) 24 Hrs timer analog type (L&T) - 01 Nos

All per item No 19.00 here in before but size min 2300x1950x420mm to accommodate and including the following accessories: (i) Copper bus bar 400 Amps CU INCOMER (ii) 250A 4 Pole 35 KA MCCB-1 No METERING (i) Digital Voltmeter (0-500V)-1 Nos (ii) Digital Ammeter (0-250A)-1 Nos (iii) R/Y/B Indication Lamp 1Set -1 Nos (iv) Current Transformer (200/5A) 3-Nos (v) Control fuse witth base (2/20A)-6 Nos OUTGOING Change over switch of 200 Amps rating - 1 Nos (i) 160A TPN 35 KA MCCB - 1 Nos (ii) 63A TPN 25 KA MCCB - 1 Nos (iii) 40A TPN 25 KA MCCB - 2 Nos (iv) 40A TPN 25 KA MCB - 2 Nos (v) 70A TP ML 4 Power contactor- 1 Nos (vi) 24 Hrs timer analog type (L&T) - 01 Nos

All per item No 19.00 here in before but size min 2300x1950x420mm to accommodate and including the following accessories: (i) Copper bus bar 400 Amps CU INCOMER (ii) 200A 4 Pole 35 KA MCCB-1 No METERING (i) Digital Voltmeter (0-500V)-1 Nos (ii) Digital Ammeter (0-200A)-1 Nos (iii) R/Y/B Indication Lamp 1Set -1 Nos (iv) Current Transformer (200/5A) 3-Nos (v) Control fuse witth base (2/20A)-6 Nos OUTGOING Change over switch of 200 Amps rating - 1 Nos (i) 100A TPN 35 KA MCCB - 1 Nos (ii) 63A TPN 25 KA MCCB - 3Nos (iii) 40A TPN 25 KA MCCB - 2 Nos (iv) 40A TPN 25 KA MCB - 2 Nos (v) 70A TP ML 4 Power contactor- 1 Nos (vi) 24 Hrs timer analog type (L&T) - 01 Nos

S & F in replacement for Sub Main wiring with two single core 6 Sqmm PVC insulated FRLSH multistranded flexible copper conductor cable 660/1100 volts grade drawn in through flexible non metallic PVC casing caping conduit with and including PVC insulated 6 Sqmm multi strand copper conductor as continuous earth wire in green colour connected to common earth dolly ,complete all as specified and as directed (Note : PVC cable and PVC casing caping shall be ISI marked) Note :- Two length of 6 Sqmm cable and one length of 6 Sqmm earth cable along with PVC casing caping will be measured as one running length

S & F sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted Vertical TPN 4 ways, 415 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof , IP42 and above suitable for incorporation MCBs and isolators etc including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed .

S & F sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 8 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof, IP 42 suitable for incorporation MCBs and isolators etc including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed

S&F MCCB TP&N 63 Amps with breaking capacity 16kA ,Fixed TM and 415 volts AC Supply ISI marked complete all as specified and directed by Engineer - in - Charge.

S & F MCB ‘B’ series type suitable for 240 volts, AC supply 6 to 32 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.

S & F MCB ‘B’ series type suitable for 240 volts,10 KA, AC supply 6 to 32 Amps , single pole (SP) with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.

Supply and fix FRP looping box of size 250x150x100 mm with connector and comprising of MCB SP 6 Amps, ISI marked,240V complete with and including providing GI clamps,nuts bolts etc suitable for fixing on PCC pole/ wall/steel tubular pole etc and including removing old unserviceable item complete all as specified and directed.

Material and labour in repair for chemical earthing pit with copper earth plate of size 3ft X 2ft X 5mm thick buried directly in gournd vertically to a depth not less than 2.25M below normal ground level , connected to & including 32 X 6 mm copper strip by means of nuts, bolts, check nuts and washers made of copper and connected to test point including brazing and excvation and earth work in any type of soil , charcoal 250 KG , Crystal salt 200 KG, magnesium sulphate of 100 KG and vegetable soil all around the plate 35 CM depth bottom to top of the plate full width of pin including PCC 1:3:6 type C1 in chamber of internal size 300 X 300 X 300 mm with wall thick ness of 120mm and 700 X 700 X 150mm bed concrete , precast PCC salb 50mm thick in cement concrete ( 1:2:4) type B1, reinforced with welded steel wire fabric or XPM Jali( weight not less than 4.00 Kg/sqm) with cast iron frame, funnel, with wire mesh, 25mm bore medium grade GI waterin pipe, lugs, 80mm bore medium grade GI protection pipe , test point etc complete all as specified and directed. Note:- (i) Rate included for testing,commisioning including checking of earth continuity and earth result complete all as specified and directed. (ii) Vendors are bound to get earthing result upto1 Ohm , Any additional work and material required to achive the required result is included in the cost (iii) Earth strip upto 7.5m shall be included in Quoted rates.

M & L for Copper Strip of size 20 x3 mm and including taking out unserviceable Copper strip complete all as specified and directed.

Urja Techniques India Pvt. Ltd.

NANGIA AND CO