Construction of Panchayat Union Middle School Building at Thiruppanamoor Panchayat of Vembakkam Block Under Mines and Minerals (2023-2024)

Amount

Civil Work

Earthwork excavation and depositing on bank with initial lead and lift in hard stiff clay soil and hard gravel soil as per standard specification SS 20 B for narrow foundation

Cement Concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of materials to site and all other labour charges, etc. complete.

Refilling the basement with excavated earth other than sand complying the Standard specification

Supplying and filling in foundation and basement with filling sand in layers not more than 15cm. thick wellrammed, watered and compacted complete complying with standard specification

Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metalincluding cost and conveyance of all materials to site and alllabour charges for mixing, laying, and curing etc complete for 10 cum

Supplying and erecting centering shuttering including necessary supports for planesurface in foundation and basement and in all floors for R C C column footing column plinth beam, beams, roof slabs, staircase steps, bed blocks, critical pier etcusing mild steel sheets of size 90 x 60 cm and 10 guage stiffened, welded with mild

Column

Column above lintel

Shunshade

Supplying and fabrication of steel including cost and conveyance ofsteel to site and all labour charges for straightening, cutting to length,bending to shape and tying in position and forming grills for all R.C.C works

Brick work in cement mortar 1:5 mix using country bricks 83/4"x41/4"x21/4"and conveyance of all materials to site and all labour charges etc complete

Plastering with Cement Mortar 1:3 (one cement and three sand) 10 mm. thick in all floors including curing etc., complete complying with standard specification and as directed

Plastering with cement mortar 1:5 mix to 12mm thick includingcost and conveyance of all materials to site and all labour charges etc

Paving the floor with kota stone slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (one cement three M.Sand), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Paving the floor with scrach proof Design ceramic tiles of any colour and 305x305x6mm size laid in CM 1:3, 20 mm thickand pointing with white cement using 0.4kg/Sq m mixed with colouring pigments to suit colour of the tiles including finishing etc., complete

Dadooing the sides of walls up to required height with est approved quality colour printed glazed tiles of size 305x203x6mm and set in CM 1:2 using 10 mm thick and pointing with same colour cement of 4 kg including cost and conveyance of all materials to site and all labour charges etc complete.

weathering course with Brick jelly lime concrete using 20mm brick jelly with slacked lime in the ratioof 32:12.5 including cost and conveyance of all materials to site and all labourcharges for mixing , laying ,and finishing etc complete for 10 cum

pressed Tiles with brick jelly lime concrete using 20mm brick jelly withpure slacked lime over R.C.C. roof slab in the proportion of 32:12.5 and finshed with one course of pressed tiles of size 23x23x2cm with cement

Colour Washing with best Distempering two Coats in to primer coat and two coats with oil bound distember over cement plasterd surface ceiling and other new surface and including clearing,preparing the surface and etc.,complete.

Colour washing two coats with Exterior emulsion paint in all floors using best quality and approved variety of colour pigments including cost of all materials, brushed and scaffolding charges, etc,., complete complying with standard specification. (Strainer and colour solution should not be used)

Painting two coats over old iron works using ready mixed enamel paintincluding cost and conveyance of paint and all labour charges etc complete

Cost & Supply of Steel Doors & window lincluding cost and conveyance of all materials to site and alllabour charges etc complete for

Window

1000 lit tank

1.00 HP Motor

1.00 HP Pannel board

32 mm PVC Pipe

25 mm PVC Pipe

25 mm PVC Bend

25 mm PVC Tap

SS Hand wash

Bala Painting

Cheppal stand

Rain water pipe

Eletrification

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC Open Light point / fan point (For electronic Regulator) SD 18

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for concealed PVC plug point SD 36

Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for service connection mains SD 65

Supply and run of 2 X 1.5 sq.mm (22 / 0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade in 25 mm dia GI pipe ( Class ' B ' ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 70

Supply and fixing of WT bulk head fitting with guard ( Philips / Bajaj / Crompton / K Lite ) suitable for incandescent lamp with 60 W bulb.SD 84

Supply and fixing of CFL bulb SD 80

Supply and fixing of Tube light

Supply and fixing of 1200 mm ( 48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. SD 110

Supply and fixing of 16 Amps DPIC Switch of 500 V with fuse and neutral (Side Handle) on suitable TW box PWD Earthing SD 142

Supply and fixing of TNEB Meter board SD 125

Top light

JCK Constructions