PERIODICAL SERVICES TO CERTAIN BLDGS AT TECHNICAL AREA, DOMESTIC AREA AND OFFICERS ENCLAVE OF 20 WING AND 46 WEU AF STN BAGDOGRA UNDER GE (AF) BAGDOGRA

Amount

M&L for preparation of old decorated plastered/ un-plastered surface of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on wall surface complete all as specified and directed.

All as per item No 1.00 above, but applying one coat of white wash on ceiling surface complete all as specified and directed.

All as per item No 1.00 here-in-before, but applying one coat of oil bound distemper on wall surface of any tint/shade complete all as specified and directed.

All as per item No 1.00 here-in-before, but applying one coat of acrylic based distemper on wall surface of any tint/shade complete all as specified and directed.

All as per item No 1.00 here-in-before, but applying one coat of oil bound distemper on ceiling surface complete all as specified and directed.

All as per item No 1.00 here-in-before, but applying one coat of cement base paint on wall surface complete all as specified and directed.

All as per item No 1.00 here-in-before, but applying one coat of 100% Premium antifungal emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre/ 10 Sqm complete all as specified and directed.

All as per item No 1.00 here-in-before, but applying one coat of antifungal paint 100% Acrylic emulsion paint (weather coat) on wall surface complete all as specified and directed.

M&L for preparation of old painted wood or wooden based surface of any description not otherwise described exc. 10 cm in width or girth and applying one coat of synthetic enamel paint white or tinted complete all as specified and directed.

All as per item No 9.00 above, but on steel/ iron surface complete all as specified and directed.

Uprooting the roots of plants / trees in walls, roof, around the tank etc scraping down soot, moulds etc, cleaning and making good disturned surface with 1:3 complete all as specified and directed.

M&L for Writing letter or figure (Block, Roman, Italic or Indian) n.exc 30 cm high complete all as specified and directed.

M&L for stop, common, short line, dash, hyphen, bracket, etc. complete all as specified and directed.

Taking down cement plaster on brick wall surface including reeking out joints hacking for key scrubbing down with water etc and removing the rubbish out of MoD land complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in cement mortar 1:6 on fair faces of brick work or concrete surface, finished even and fair without using extra cement complete all as specified and directed.

M&L for preparation of new plastered wall surface and applying two coats of oil bound distemper over 1.5mm thick Birla/JK wall care putty over a coat of resistant priming paint complete all as specified and directed.

M&L for preparation of newly plastered or un plastered surface of walls including cornices, pilasters etc and applying two coats of cement base paint over a coat of alkali resistant white cement primer complete all as specified and directed.

M&L for preparation of old painted surface of any description over 10cm girth or width, not otherwise described and applying one coat of synthetic enamel paint white or tinted complete all as specified and directed.

M&L for preparation of new surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whitening complete all as specified and directed.

M&L for preparation of new plastered wall surfaces and applying two coats of oil bound distember over 1.5mm thick Brila/JK wall care putty over a coat of resistant priming paint complete all as specifeid and directed.

M&L for preparation of old floor/hardstanding/pavers block/chequered tile surface and applying two coats of floor paint over a self priming coat as per following working specification :- (a) Wash surface with a house to remove loose dust and scrub with brush to remove algae/ fungus and moss growth (b) After diluting the emulsion with 30 to 40% water, applying a self priming coat.(c) Wait for 6 to 7 hours, then add two coats of floor coat emulsion after thinning with water to obtain brushable consistency. Make : Indigo or equivalent

Periodical services to certain bldgs at 46 WEU M&L for preparation of old decorated plastered or un-plastered surface of walls including pilasters and cornices etc by brooming down or using steel wire brushes with scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil and greasy spots etc and applying one coat of cement base paint treatment complete all as specified and directed.

M&L for preparation of old decorated plastered or un-plastered surface of walls including pilasters and cornices etc by brooming down or using steel wire brushes with scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil and greasy spots etc and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old decorated plastered/ unplastered surface of ceilings by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper on ceiling surfaces by using roller brush complete all as specified and directed.

M&L in repair, 4mm thick non asbestos fibre cement boards, fixed as in ceiling, inserted in GI/Aluminium framework complete all as specified and directed.

Taking down chowkat or frame with shutters (without taking off shutter from frame) exc. 1.5 sqm but n.exc 4.00 sqm each etc complete all as specified and directed.

M&L for second class hardwood plain, solid straight chowkhat and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned joints complete all as specified and directed.

M&L for 30 mm thick flush shutter, solid core construction with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F aluminium anodised barrel tower bolt, 150 mm long of extruded section etc complete all as specified and directed.

S&F 250 mm aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and directed.

S&F 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F 75 mm long butt hinge, heavy weight, cold rolled mild steel and fixed etc complete all as specified and directed.

M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down cement plaster from wall including racking out joints hacking for key and scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and fair without using extra cement complete all as specified and directed.

M&L for rendering 20 mm thick cement plaster in cement mortar (1:4) in two layers of 10mm thick each layer mixed with water proofing compound on top layers as per manufacturer's instructions on top layers, finished even and fair without using extra cement complete all as specified and directed. Note: water proofing compound shall be measured and paid separately as "supply only".

M&L for preparation of new plastered surface of walls including cornices, pilasters etc and applying two coats of cement base paint over a coat of alkali resistant white cement primer complete all as specified and directed.

M&L for preparation of new plastered or un plastered surface of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

Supply only integral water proofing compound ISI marked complete.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for refixing removal to store complete all as specified and directed.

All as per item ser item No. 42.00 above, but 20 mm bore complete.

M&L for 15 mm bore steel tube, medium grade, galvanised with all fittings and fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

All as per ser item No. 44.00 above, but 20mm bore complete.

S&F in repair, vitreous china wash down water closet pan (pedestal pattern) white including connection to drain (or outgoing pipe) and to flush pipe, antishonage pipe and plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed.

S&F in repair, vitreous china, squatting pan, 'Orissa Pattern', size 580 mm x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) and including 100mm bore ‘P’ or ‘S’ trap and provision of cement concrete bedding and connected to existing flush pipe complete all as specified and directed.

S&F in repair, PVC low level flushing cistern, white, 10 litre capacity, syphonic action type, white body with inlet, ball valve, float, handle, bracket, 32mm bore steel chromium plated flush pipe etc and connecting to WC and water pipe lines complete all as specified and directed.

S&F in repair, vitreous china wash hand basin, flat back, white of size 630x450mm including cutting for and pinning in ends of brackets with and including brackets and 32mm bore, 1.50m long DPE waste pipe complete all as specified and directed.

S&F in repair, rotational moulded polyethylene water storage tank, 500 litres capacity, ISI marked, multi layer constriction (cylindrical vertical with closed top), hoisted & fixed in position including dismantling water tank and removing to store complete all as specified and directed.

S&F in repair, rotational moulded polyethylene water storage tank, 1000 litres capacity, ISI marked, multi layer constriction (cylindrical vertical with closed top), hoisted & fixed in position including dismantling water tank and removing to store complete all as specified and directed.

S&F in repair, ball brass valve, high pressure, with polyethene float and fly nut complete, screwed for GI pipe or brass ferrule of 20 mm bore complete all as specified and directed.

S&F in repair, 15mm bore bib tap chromium plated (Long Body), with wall flange, screwed down, screwed for GI pipe or brass ferrule complete all as specified and directed.

S&F in repair, 15mm bore pillar tap, long neck cast copper alloy with capstan head, chromium plated, screwed down, high pressure with long screwed shanks, fly-nuts, with screwed for 15mm bore GI pipe complete all as specified and directed.

S&F in repair, towel rail, 600mm long chromium plated fixed with and including chromium plated brass screws with wooden plugs complete all as specified and directed.

S&F in repair, soap dish brass chromium plated fixed with and including chromium plated brass screws with wooden plugs complete all as specified and directed.

S&F in repair, 15 mm bore angular stop cock, chromium plated (concealed type), screwed down, high pressure, screwed both ends for 15mm bore GI pipe or for union complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for vitrified ceramic tile 10 mm thick (square/ rectangular) polished, light shade, area of each tile not exceeding 0.36 sqm, in floors etc. set over and incl 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M/S MANAS MITRA (BID ID -3403679)

SHRI P P SHARMA (BID ID -3406000)

SARKAR ENGINEERING CO. (BID ID -3403608)

SREE SWAPAN KUMAR GHOSH (BID ID -3406271)

M/S SWAPAN KUNDU (BID ID -3402940)

BUILDERS ASSOCIATE (BID ID -3403485)

NIRANJAN SARKAR (BID ID -3404412)

M/s Prakash Traders (BID ID -3403322)