COMPREHENSIVE MAINT OF INTERNAL OF B AND R WORK AT NAYA RAIPUR MIL STN

Amount

Demolition of brick work or stone masonry built in cement mortar incl all quoins, arches, pillars etc complete all as specified and directed.

M & L brick work with modular fly ash bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc complete all as specified and directed.

M & L rendering 10mm thick in cement plaster 1:6 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement complete all as specified and directed.

M & L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and fair without using extra cement complete all as specified and directed.

M & L rendering 5mm thick in cement plaster 1:3 on concrete surfaces of ceiling complete all as specified and directed.

M & L for two coats of cement base paint incl preparation of new surface of wall over and incl a coat of primer complete all as specified and as directed.

M& L for two coat of oil bound distemper incl preparation of new surface of wall over and incl a coat of primer complete all as specified and as directed.

M & L for 1 mm thick averaging Wall care putty on wall complete all as specified and directed.

M & L for one coat of oil bound distemper white/coloured or tinted on old decorated surfaces of walls including preparation of surface by washing rubbing down and stopping of distempered surfaces complete all as specified and directed.

M & L three coat of white wash on ceiling including preparation of new plastered surface and complete all as specified and directed.

Demolition of Unreinforced cement concrete in ground floors and paving’s n. exc 15cm thickness below or above ground level complete all as specified and directed.

M & L for cement concrete type D2 1:4:8 in sub base of floors 75 mm thick complete all as specified and directed.

M & L 75 mm thick PCC 1:3:6 type C2 using( 40mm graded stone aggregate) as in plinth protection/foot path finishing cement concrete even and fair incl filling of expansion joints with sealing compound complete all as specified and as directed.

M & L PCC 25mm thick 1:2:4 of type B0 using 12.5mm graded stone aggregate as in base of floors complete all as specified and directed.

M & L 40mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate laid in panel finished even and smooth with using extra cement as in flooring complete all as specified and directed.

M & L for plain cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in surface channels and base of drains complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L Glazed ceramic coloured tiles in vertical surface 300 mm x 200 mm x 7 mm thick set and jointed in neat cement slurry and pointed in white cement or colour cement including 10 mm thick in CM 1:4 complete all as specified and as directed.

M & L providing non- skid glazed ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n xc 0.11 sqm in floor etc set and jointed with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:4 complete all as specified and as directed.

M & L providing non- skid glazed ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n xc 0.18 sqm, in floor etc including 15 mm thick screed bed in CM mortar 1:4 set and joited with neat cement slurry and pointed in coloured cement incl to match coloured tiles complete all as specified and as directed.

M & L for Vitrified light shade colored ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M & L for Vitrified light shade colored ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in skirting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl 10mm thick plaster in CM 1:4 complete all as specified and as directed.

Supply only glass dividing strip 3mm thick and 22mm wide in flooring complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floor, aprons etc complete all as specified and directed.

M & L for machine cut mirror polish kota stone slab flooring18-20mm thich over 20mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shad of the slab including round nosing at corners rubbing and polishing complete all as specified and directed.

M & L for machine cut mirror polish kota stone slab 18-20mm thich in riser of step, skirting, dado and pillars over and including 10mm thick rendering in CM 1:4 including rubbing and polishing complete all as specified and directed.

S & F in repair Granite (of any type) tiles 20mm thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry and & pointed in white or coloured cement to match the surfaces of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed.

Supply and fix machine pressed precast concrete interlocking paver block any shape and size with gray cement & pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and as directed.

M & L for sand cushioning including spreading in layers and consolidated to thickness of 50mm (minimum) for receiving precast PCC interlocking blocks complete all as specified and directed.

M & L for Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges of cement concrete type B0 1:2:4 using 12.5 mm stone aggregate complete all as specified and directed.

M & L for repair to sunken floors and side walls as under :- (a) Applying first layer of slurry @0.488Kg/Sqm mixed with Acrylic based polymer modified cementitous composite compound @ 0.253Kg/Sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of cement slurry @0.242 Kg/Sqm mixed with Acrylic based polymer modified cementitous composite compound @ 0.126 Kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 Hrs. (c) Laying 200 microne thick polythene film pasted with the help of adhesive.

Dismantling Asbestos Cement/CGI (Corrugated, Semi corrugated etc.) sheets in roof coverings complete all as specified & directed.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping crews all as specified and directed.

S & F for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour in ridge, valley gutter & fascia,drip and straight flashing having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed by Eng-in-charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n. exc 4 sqm each complete all as specified and directed.

Taking down shutter of any description n exc 1 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed.

Refixing of shutter in the same of opening after minor repair complete all as specified and directed.

S & F Powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No) Hinges type B-21 100mm long (2 No) suitable handle (1 No) complete all as specified and directed by Eng-in-charge.

S & F Powder coated anodised aluminium frame for door section/ window section/ ventilator section for side hung type shutter /sliding type shutter/fixed type shutter in two or more tracks, including automatic locking handle, rollers and roller plate & fitting arrangement complete all as all as specified and directed by Engineer-in-charge.(Glass pane, hydraulic door closer, plush plate, floor hinges shall be measured and paid separately complete all as specified and directed.

S & F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and directed.

S & F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

S & F steel ventilator with top hang shutter including hinges steel pag stay complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

M & L framed work such as grills grating etc with end of bars shoulder and/or riveted welded or forged into spikes framed guard bars iron doors ladders framed balusters, walk ways, Railings, frame work of water tanks and similar work conforming to Fe410.complete all as specified and directed.

Hacking out old broken glass of (any thickness, size, quality or description) from old wooden frame or stones, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed.

S& F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed.

S & F 3 mm thick sheet glass, Ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

Supply and fix in repairs galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed.

S & F 125 x 60mm size of pressed steel frame for door with one or more rebates including necessary fixing lugs, lock striking plates, hinges etc. complete size /profile of frame as per IS complete all as specified and directed.

S & F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

30 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified.

S & F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed..

M & L preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L applying 2 coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation over 10 cm width and girth complete all as specified and directed.

S & F 250 mm long mild steel sliding door bolts, ISI marked clip & bolt type, stove enamelled black, with bright bolt not less than 12mm dia with and including minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

S & F 75 mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S & F 100 mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S & F 200 mm long mild Barrel tower bolt, oval type stove enamlled black with bright bolt and fixed complete all as specified and directed.

S & F 150 mm aluminium handles cast type, anodised complete all as specified and as directed.

S & F in repair vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests excluding flushing cictern and flush pipe incl provision of lime concrete complete all as specified and directed

S & F in repair Vitreous China wash down water closet pan(pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe "P" or "S" trap (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe etc. all as specified and as directed.

S & F in repair for Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S & F in repair health faucet (ABS body) mild steel chromim plated suitable for 15 mm dia pipe with 1.25 mtr long flexible pipe tube and ABS wall hook including making connection with fixed in postion complete in all respect as specified and directed.

S & F in Repair 10 ltrs capacity PVC valveless symphonic action type flushing cistern low level white , with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and directed.

Taking up or down existing GI Tubing15 mm dia & connections including cleaning for refaxing or removal to store all as specified and as directed.

Ditto all as above items No 71 but 20 mm dia all as specified and directed.

S & F GI tube 15 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors complete all as specified and directed.

Refaxing only GI tube 15mm dia medium grade will new fittings and fixed to wall, ceiling or laid in floor and ceiling and wall complete all as specified and directed.

S & F GI tube 20 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors complete all as specified and directed.

Refaxing only GI tube 20mm dia medium grade will new fittings and fixed to wall, ceiling or laid in floor and ceiling and wall complete all as specified and directed.

S & F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plug , washer and wastes , including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repair waste fitting brass chromium plated for kitchen sink coupling of 32mm size and any pattern including waste pipe complete all as specified and directed.

S & F in repair bib taps 15mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed all as specified (minimum wt. 90gms) complete all as specified and directed.

S & F (in repairs) Bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed..

S & F (in repairs)two way angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down, screwed both end for iron pipe or brass ferrule for 15 mm bore of pipe complete all as specified and as directed.

S & F (in repairs) angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or brass ferrule for 15 mm bore of pipe complete all as specified and as directed.

S & F (in repairs) Stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down, screwed both end for iron pipe or brass ferrule with long shank and cup for 15 mm bore of pipe complete all as specified and as directed.

S & F in repair swivel shower rose of brass Chromium plated for fixing with 15mm pipe fixed complete all as specified and directed.

Dismantling of existing water tanks capacity n exc 500 ltr and removing to store complete all as specified and directed.

Dismantling of existing water tanks capacity exc 500 ltr n exc 1000 Lts and removing to store complete all as specified and directed.

S & F rotational moulded polyethylene water tank of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part- I complete all as specified and directed.(water tank shall be ISI marked having min three layers).

S & F rotational moulded polyethylene water tank of 1000 ltrs capacity ( cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part- I complete all as specified and directed. Note :- Water tank shall be ISI marked having min three layers.

S & F in repair 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 210gms) complete all as specified and directed.

S & F 20 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe complete all as specified and directed.

S & F in repair vitreous china wash basin white, flat, back, size 550x400 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe all as specified and directed.

S & F 15mm bore pillar tap cast copper alloy with capstan head Chromium plated screwed down with or without letter Hot or Cold with long shank and fly nuts screwed for iron pipe and fixed as specified and directed.

S & F in repair only 32mm dia waste fittings brass chromium plated for basin with long screwed shank and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S & F PVC connection 15mm bore length not less than 600 mm long with both ends PTMT nuts complete all as specified and directed.

S & F in repair CP towel rail (tubular type) 20mm dia, 600 mm long between flanges all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets as specified and directed

Supply & fixing 'E' board 605 x 605 x 4 mm thick white pre laminated set & embosed, reinforced, designer ceiling board tiles of approved texture fixed at all height laid on hot dipped galvanised iron imposed grid with 24 mm wide T-section exposed flanges which shall be powder coated, white the frame work shall comprises of main runner made from 0.33 mm thick galvanised steel sheet and of size 24 x 32 x 300 mm and spaced at 1200 mm center to center fixed to be structural soffits by approved hangers at 1200 mm rawl center, hangers of GI wire 4 mm dia to be fixed by approved rawl plug, level and fasteners and screws etc., the last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall, flush fitting of 120 mm long cross tee (with double stitching) to be interlocked between main runners at 600 mm center to center, size 1200 x 600 mm modules, cross tee longer than 600 mm to be supported independently on 600 x 600 mm moduler to be formed by fitting 600 mm long cross tee centrally between the 1200 mm cross tee. Tee, perimeter wall angle shall be of 0.45 mm thick GS sheet of size 19 x 19 mm and 300 mm long of white colour all as per manufacturer's instructions complete all as specified and directed.

S & F in repair fancy type curtain rails harisson rails, mild steel , chromium plated with fixing bracket, stops, rollers etc for hanging curtain rod complete all as specified and directed

S & F in repair 600mmx450mm bevelled edges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer complete all as specified and directed.

S & F in repair Aluminium Mortise lock 4 lever, size 75mm as all specified and directed

S & F in repair door closer aluminium (Die cast) body hydraulically regulated, designation No 3, universal type, suitable foor door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

M & L taking out roots of trees penetrated through valves/concrete surfaces etc upto a depth of 600mm by chiseling , demolition of brick work, concrete work and pouring concentrated acids/Dr fixit chemicals upto the depth of roots and making good the disturbed portion.

Total contract sum shall be calculated after deduction of schedule of credit amount of Rs. 21,665.00

M/s Rahul Traders (BID ID -3302490)

M/S INDIA ENTERPRISES (BID ID -3300801)

SKP CONSTRUCTION (BID ID -3300627)