Design, Fabrication, installation, testing and commissioning of 2Ton gantry with manual chain pulley block with accessories for extraction of foot valves suction Pipes from sump along with allied works at LIS Dai Chak

Amount

Design, fabrication, installation, testing and Commissioning of gantry with 2 Ton Chain pulley Block with accessories for extraction of Foot valves and Suctions Pipes at LIS Dei Chak. The job involves laying RCC Concrete blocks 2Nos. of Size (2ft x 2ft x 4ft) adjacent to the suction pipes for anchoring of vertical square sections. The job involves excavation of trench of size (2.25 x 2.25 x 4.25)ft by excavating soil, removal of excavated material and disposing off the same, laying of crushed stones 40mm, laying of one layer of 1:4:8 concrete mass, 4” depth, providing and laying of TMT steel 10mm, 6”sq, mesh throughout the blocks, laying of 1:1.5:3 concrete mass. Providing and fitting of suitable no of vertical TMT steel members to be provided all along the blocks and cement concrete to be properly grouted in the blocks with complete curing. Fabrication of 2Nos. 5m height vertical square section of size (0.25m x 0.25m) out of M.S angles of 50x50x6mm size. The vertical square sections to be provided with adequate no. of supports fabricated out of MS angle for strengthening/reinforcement. The job involves fabrication of the square sections at the site. Erection of these 2 nos. Square sections by grouting them in the RCC so that 4ft of vertical square sections are embedded in the RCC block. The job involves providing and fitting of ISMB 150 size and length of approx. 16ft to be welded on the top of two vertical square sections. Job also involves providing and fitting of 2Ton chain pulley block along with horizontal movement mechanism on the overhead ISMB.Painting of the complete structure by applying one coat of red oxide and two coats of black enamel for its longevity and smooth finish. Any modifications/alterations of the job if required at the time of execution may be done as per actual site conditions. The job includes cost of material, labour charges and painting charges by applying one coat of red oxide and two coats of black enamel for its longevity and smooth finish. The job also includes all types of carriage charges of material, hire charges of shuttering material, cutting, laying and bending of steel, labour charges for curing of foundation blocks, cost of chain pulley block and M.S steel angles and channel etc, labour charges for fabrication of overhead gantry,painting and welding set & Oxy-acetylene gas equipments, skilled /semiskilled labour charges at the site of installation and tools and tackles required at site and any other charges incurred during the execution of job. (Complete Job)

Fabrication and installation of M.S. base platform near the bank of Choi Nallah at LIS Dei Chak for facilitating dismantling and fitting of foot valves, approx. 03m long and 0.75m wide as working platform. Fabrication of outside frame from (50x50x6) mm M.S angle iron and then laying/welding of M.S flat 50x6mm on the top of the frame by using of good quality of welding electrodes. The working platform should be properly fixed by way of welding of required no. of M.S supports approx 1.50m long of (75x75x6) mm M.S angle iron. At the bottom of each leg, MS plate size 0.30mx0.30m approx. of 6mm thickness is to be welded properly so that platform should be properly balanced in the Choi Nallah. Anchoring/holding the whole platform by providing of M.S channel/angle from the top of the suction pipes and clamping/welding with the suction pipes for extra support. Welding precisely is to be done into two or three layers as required along with removal of slag before a new layer is put in place. Any modifications/alterations of the job if required at the time of execution may be done as per actual site conditions. The job includes cost of material, labour charges and painting charges by applying one coat of red oxide and two coats of black enamel for its longevity and smooth finish. The job also includes all types of carriage charges of material and tools and tackles required at site and any other charges incurred during the execution of job. Complete Job

SMART TECH AND CO

M/S A D INDUSTRIES