REPAIR TO FENCING, GARBAGE BINS, COMPOUND WALL AND CONNECTED ITEMS AT SANGRUR UNDER GE(S) PATIALA

'Notes: (i) Please refer Schedule 'A' Notes of tender documents.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion including concrete foundation and removal of waste material and making good disturbed ground complete all as specified and as directed.

Dismantling fencing wire mesh (chain link) any type, incl removal, complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.50 cum, getting out, removing the excavated material to a distance n.exc 50m, complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in foundation of posts and struts complete all as specified and as directed.

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia dia barbs at 75mm spacing and straining and fixing to any type standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc., complete all as specified and as directed. Note : Each line wire to be measured

Restraining, resecuring including making good staples of Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia dia barbs at 75mm spacing and provisin of galvanised mild steel wire, staple or steel pins etc as complete all as specified and as directed.

S&F Mild steel work as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting,etc., 10mm dia MS round bars and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe-410 W(Gde E-250) quality B complete all as specified and as directed.

Preparing new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-charge.