Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹39.0 LAccepted-AOC HIG 37 GROUP 38 TAJNAGARI PHASE 1 AGRA 282001 CWE AGRA | AGRA | UTTAR PRADESH | 282001 | 1 | Accepted-AOC Due to L-1 and credit | |
| 2 | 2₹40.0 L+₹14,432.50 (0.36%)Rejected-Finance 51 212D 3E K V NAGAR NEAR ADARSH NAGAR KHERIA MOD AGRA UP 282001 | AGRA | UTTAR PRADESH | 282001 | 2 | Rejected-Finance Being other than L-1 | |
| 3 | 3₹52.2 L+₹12.3 L (30.9%)Rejected-Finance | 3 | Rejected-Finance Being other than L-1 | |
| 4 | Rejected-Technical | - | Rejected-Technical Being ban by CECC in WLR |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
25 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Adm Area Agra 282008
GE (AF) Adm Area Agra 282008
REPAIR/ IMPROVEMENT TO KITCHEN, TOILETS/ BATHROOM OF CERTAIN BUILDING ALONG WITH CONNECTED WORKS UNDER AGE BR-I OF GE (AF) ADM AREA AT AF STN AGRA.
2023_MES_634815_1
8000-2115/E8
Open Tender
Civil Works
Item Rate
180 days
AF Station Agra
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
GE AF Adm Area Agra
₹96,000
Yes
29 Feb 2024
29 Dec 2023
1 Feb 2024
29 Dec 2023
25 Jan 2024
13 Jan 2024
Amount
Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.
M&L for brick work with fly ash bricks, old size, class designation 75, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed.
M&L for brick work with fly ash bricks, old size, class designation 75, straight or curved on plan to any radius in half brick walls built in cement mortar 1:4 complete all as specified and directed.
Taking down cement plaster on walls/ceiling of any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.
M&L for rendering 15 mm thick on brick work or concrete surface in cement mortar 1:6 finished even & smooth without using extra cement complete all as specified and directed.
M&L for rendering 5 mm thick on concrete surfaces of ceiling with CM (1:3) and finished even & smooth without using extra cement complete all as specified and directed.
M&L for preparation of new surface of wall and applying wall care putty minimum 1 mm thick, a coat of clear cholle primer and two coats of oil bound distemper complete all as specified and directed.
M&L for applying three coats of white wash on walls including preparation of new surface complete all as specified and directed.
M&L for applying two coats of cement base paint over a coat of alkali resistant primer on new surfaces of walls including preparation of surface complete all as specified and directed.
M&L for applying three coats of white wash on ceiling including preparation of new surface complete all as specified and directed.
M&L for scraping out loose mortar/concrete by chiseling/ wire brushing complete and applying rust removing solution (rebaklene solution) to exposed corroded reinforcement and applying a coat of epoxy primer (Nitozink primer from M/s Fosroc or equivalent as approved by GE) as per manufacturer instructions providing and fixing of wire mesh of weight not less than 2.5 Kg per Sqm and apply screed 25 mm average thickness in CM (1:4) mixed with liquid integral water proofing compound (complast 'X' as per manufacture instructions with gunitting machine at a pressure not less than 5 Kg/Sqcm finally rendering 10mm thick plaster in CM (1:4) using liquid integral water proofing compound (complast 'X' 421 i.e. from M/s Fosroc and Nitobound AR from M/s Fosroc or equivalent as approved by GE) as per manufacture instructions including applying three coat of white wash complete all as specified and directed.
Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15 cm thickness(below or above ground level) complete all as specified and directed.
M&L for 25 mm thick cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in flooring finished even and smooth using extra cement complete all as specified and directed.
M&L for averaging 40 mm thick cement concrete 1:2:4 type B-1 (20 mm graded stone aggregate) as in sub base of floor or pavings etc. complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick joint less (square or rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
M&L for glazed ceramic coloured designer tiles of size 450 x 350 x 6-7 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10 mm thick in cement mortar 1:4 on other than fair faces of brick wall finished rough to fix tiles complete all as specified and directed.
M&L Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick joint less (square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
M&L for light shade vitrified ceramic tiles 10 mm thick(square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
M&L for machine cut kota stone slab of size not less than 550 x 550 mm (except where lesser size required) as in flooring or in trades of steps 20 to 25 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing, rounding of edges and mirror finish polishing with & including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes and demolition of existing stone slab complete all as specified and directed.
M&L for machine cut kota stone 18 to 22 mm thick as in steps, risers, skirting, dado etc., bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of the stone including grinding, rubbing and polishing with & including rendering 15 mm thick in cement mortar 1:4 finished rough to fix stone and taking down existing plaster/kota stone complete all as specified and directed.
M&L for granite stone 18-20 mm thick (of any type) glazed (table rubbed and polished) fixed as in skirting, steps, jambs, pillars, window cills, cooking plateform and the like set in cement mortar 1:4 and pointed with white cement (1:2) using marble dust with admixture of pigment to match with and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 and demolition of existing stone slab complete all as specified and directed.
Taking down shutters of any description exc. 1 Sqm but not exc. 2 Sqm each and refixing in same opening after necessary alterations to door shutter complete all as specified and directed.
Use and Waste Formwork to chajja including edges rough finished surface of concrete complete all as specified and as directed.
Use and waste of formwork to soffits of suspended slab such as roof slabs, floor slabs, landing and similar work not exceeding 200mm thick (horizontal or sloping) for rough finished surfaces complete all as specified and directed.
M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for Mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for RCC 1:2:4 type B1 (20mm graded stone aggregate) as in chajja etc. and demolition of exisiting RCC complete all as specified and directed.
M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like including and demolition of exisiting RCC complete all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. cutting exceeding 10 cm and not exceeding 20 cm girth as in brick wall complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided al of debries outside defence land complete all as specified and directed.
M & L for PCC 1:5:10 type E-2( using 40 mm graded stone aggregate) as in filling in sunken floor of toilet and bath room etc. complete all as specified & directed.
M&L for averaging 40 mm thick cement concrete 1:2:4 type B-1 (20 mm graded stone aggregate) as in levelling / maintaining slope in sunken portion etc. complete all as specified and directed.
M& L for rendering wall, floor as in sunken portion 15 mm thick in two layers of 10 + 5 mm in CM 1:6 mixed with Pidi Proof 101 LW(+) of Dr fixit (Pidilite) or equivalant intergral water proofing admixture @ 200 ml/bag of cement over two coats of super latex 302 of Dr fixit (Pidilite) or equuilvalant in the ratio (1:4:7), (one part super latex, 4 part water and 7 parts of cement) @ 1.5 Kg of homogenious mixture /Sqm in two coats and finish the surface even and smooth (without using extra cement) complete all as specified and directed. Note:- Pidi proof and super latex to be measured and paid separately as supply only.
Supply only Pidi proof 101 LW (+) of Dr Fixit (Pidilite) or equivalent of make Latex/ CICO No. 1/ Fosroc (India) Ltd.
Supply only super latex 302 of Dr Fixit (Pidilite) or equivalent of make Latex/ CICO No. 1/ Fosroc (India) Ltd.
M&L for cutting holes into or through cement concrete slabs, chajjas etc. of superficial area n. exc. 100 Sqcm for inserting pipe as in sunken portion to facilitate efficient drainage including packing with PCC 1:3:6 and making good to match existing surface complete all as specified and directed.
S&F 50 mm GI pipe, medium grade in isolated length of 400 mm long inserted into wall surface as in water drainage spout complete all as specified and directed.
Taking down and refixing of 20 mm bore GI Steel tubings including new or old fittings complete all as specified and directed.
Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings including cutting chases of wall wherever required and making good the surface to match the existing or laid in floors and testing including taking down existing GI tubing complete all as specified and directed.
Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings including cutting chases of wall wherever required and making good the surface to match the existing or laid in floors and testing including taking down existing GI tubing complete all as specified and directed.
Supply, fixing, laying & testing Unplasticised PVC pipes of pressure rating 10 kfg/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe with and including all UPVC .fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing including taking down existing GI tubing complete all as specified and directed.
S&F in repair 1 mm thick stainless steel plate rack over all size 900 x 750 x 250 mm of standard pattern and make as approved by GE complete all as directed.
S&F 32 mm bore single socketed low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/cm2 fixed complete to walls, ceilings or laid in floors etc. with all fittings such as ends elbow, union, bend, reducer etc., including concealed in wall and making necessary holes complete all as specified and directed.
S&F in repair 10 Ltrs capacity, PVC valveless, syphonic action type, low level flushing cistern, white, with inlet, ball valve, float and handle complete with all internal accessories and fixed to wall, PVC flush pipe 32 mm dia 90 cm long fixed properly to inlet of WC and making good to disturbed surfaces of wall or floor complete all as specified and directed.
S&F in repair sink with draining board made of stainless steel 1mm thick with plugs, washers, waste pipe and coupling overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.
S&F in repair PVC flexible waste pipe 32/40 mm dia with socket minimum 800 mm long for WHB/ sink/ urinal complete all as specified and directed.
S&F in repair bib tap 15 mm bore high presure of PTMT, any colour, screwed, for iron pipe and fixed (minimum weight not less than 90 grams) complete all as specified and directed.
S&F in repair stop valves 15 mm nominal bore, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed .
S&F in repair stop valve/angle valve 15 mm nominal bore cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.
S&F in repair long body bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.
S&F in repair Viterous China wash down water closet pan (pedestal pattern) with 'P' or 'S' trap, white (excluding fixing bolts, flushing cistern and flush pipe) and including Plastic water closet seat cover white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest including connection to trap and flushing pipe, anti syphonage and providing cement concrete bedding complete all as specified and directed.
S&F in repair vitreous china wash hand basin white flat back size 550x400 mm including two Nos angle iron brackets including 32mm dia PTMT waste coupling, waste pipe complete all as specified and directed.
S&F in repair Waste fittings, 32 mm bore, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement complete all as specified and directed.
S&F in repair Waste fittings, 40 mm bore, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement complete all as specified and directed.
S&F in repair pillar taps, cast copper alloy with capston heads, fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.
S&F in repair PVC connection 600 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed.
S&F in repair chromium plated brass shower rose 125 mm dia with or without swival joints, with CP long shank including fixing to 15 mm dia pipe or union all as specified.
S&F in repair 20 mm dia brass chromium plated tubular towel rail, D type, 60 cm long between flanges fixed with rawl plug and CP brass screws complete all as specified and directed.
S&F in repair PTMT grating doom 100 mm dia (min wt 25 Gms) complete all as specified and as directed.
S & F in repair plastic water closet seat cover, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.
S&F in repair Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe superior quality with 1.25 m long flexible pipe and ABS wall hook including making connections and fixed in position complete all as specified and directed.
S&F in repair 15 mm dia chromium plated brass central hole wash basin mixer swan neck type with accessories fixed in wash basins for mixing hot and cold water, screwed down for 15 mm bore GI pipe complete all as specified and directed.
S&F in repair 15 mm dia chromium plated brass wall mixture for mixing hot and cold water sutable for 15 mm bore GI pipe complete all as specified and directed.
S&F in repair soap dish, brass chromium plated, oval shaped of size 100 x 50mm (approx), fixed to wall with PVC gully and CP screws complete all as specified and directed.
S&F in repair PTMT towel ring with bracket, round shape, fancy type, fixed to wall with PVC gully and CP brass screws (min wt 90 Gms) complete all as specified and directed.
S&F in repair tripple layer rotational moulded polyethylene water storage tanks 500 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position with and including ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and directed.
S&F in repair sheet glass corner glass shelf 3 tier assembly consisting of 5.5 mm thick toughen glass 20 mm average radius shelf with chromium plated bracket guard and railing and fixed with CP screws complete all as specified and directed.
S&F in repair toilet paper holder, superior quality, fancy type, brass chromium plated with wall hook bracket complete all as specified and directed.
S&F in repair Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed
S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed
Taking down Chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each complete all as specified and directed.
Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm and n. exc. 4.00 sqm each complete all as specified and directed.
S&F factory made solid PVC door frame of size 50mmx 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and fixed with screws and rawl plugs complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded feathred edges plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour feathred edges PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and directed.
S&F factory made solid WPC door frame of size 100 mm x 55 mm single rebated made out of solid WPC with standard grade density 780 Kg/CBM single side prelaminated PVC sheet and edges will be painted to match with prelaminated sheet complete all as directed.
S&F Factory made fully glazed/ wire gauge (single/double piece) both side prelaminated WPC door shutter 33-35 mm thick (style) consisting of frame made out of M.S. tubes of size 19mm x 19mm (19 gauge) for stiles, top & bottom rails. and 5mm thick single piece plain colour PVC sheet to be used to cover top rail, lock rail & bottom rail on either side and gap insert for top rail and bottom rail. Panel will be wire gauzed and tightened firmly and fitted as per manufacturer's instruction including 0.36 mm dia stainless steel wire cloth with average width of aperture 1.40 mm and aluminium XPM in rhombus shape in one piece from top rail to bottom rail complete all as directed.
S&F Box type steel windows/ventilators with side hung shutters with glazed and gauzed double panel shutters both provisions including box type hinges or factory made butt hinges with steel handle, tower bolts, hold fasts and steel peg stays etc. complete without glazing bars dovetailed or welded and 10mm square guard bars @ 125mm c/c both way complete as per drg No. CE/ALD/TD-172 sheet No 1/2 to 2/2 complete all as specified and directed. Note: Wire cloth and glass shall be measured and paid separately.
S&F figured glass, 3 mm thick, pin head type and glazing with oil putty in squares not. exc. 0.50 Sqm in each pane complete all as specified and directed.
S&F 18/19 mm thick UPVC board, grade 1 both side plain white colour, fixed with screws or rubber beads etc. as in kitchen cabinet and cupboard complete all as specified and directed.
S&F 18/19 mm thick UPVC board, grade 1 both side prelaminated with decorative choice lamination, fixed with screws or rubber beads etc. as in kitchen cabinet and cupboard complete all as specified and directed.
S&F 6 mm thick UPVC board, grade 1 grade 1 both side plain white colour, fixed with screws or rubber beads etc. as in kitchen cabinet and cupboard complete all as specified and directed.
S&F 100 mm size stainless steel (304 grade), Handle, medium weight ISI marked and fixed with stainless steel screws complete all as specified and directed.
S&F 100 mm size stainless steel, butt hinges, medium weight ISI marked and fixed with screws complete all as specified and directed.
S&F aluminium anodised barrel tower bolt of extruded section 100 mm long ISI marked and fixed complete all as specified and directed.
S&F100 mm long stainless steel (304 grade), tower bolt, medium weight ISI marked and fixed with stainless steel screws complete all as specified and directed.
S&F aluminium anodised barrel tower bolt of extruded section 150 mm long ISI marked and fixed complete all as specified and directed.
S&F alumunium handle, cast type, anodised 150 mm long ISI marked complete all as specified and directed.
S&F aluminum alloy anodized sliding door bolt 300 mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as directed and directed.
S&F 100 mm long hasp & staple, safety type, stainless steel (304 grade) with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as directed.
S&F auto closing hinges 35 mm of O crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutter complete all as directed.
S&F in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and laid on floors or fixed to walls with clamps complete all as specified and directed.
S&F in repair PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and laid on floors or fixed to walls with clamps complete all as specified and directed.
S&F in repair PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors including necessary earthwork and demolition of PCC haunching etc. complete all as specified and directed.
S&F PVC(SWR) junction 110 mm bore single (single T) equal or unequal complete all as specified and directed.
S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed.
S&F PVC(SWR) bends 110 mm bore any radius with rubber ring complete all as specified and directed.
S&F PVC(SWR) bends 75 mm bore any radius with rubber ring complete all as specified and directed.
S&F PVC(SWR) bends with access door 75 mm dia complete all as specified and directed.
S&F PVC(SWR) bends with access door 110 mm dia complete all as specified and directed.
S&F in repair 110 mm dia PVC (SWR) floor trap, with CP grating including jointing to waste pipe with solvent cement and fixed in cement concrete 1:2:4 type B1(using 20 mm graded stone aggregate) complete all as specified and directed.
S&F PVC(SWR) 110 mm dia branch pieces single (single Y) equal or unequal or TEE junction with access door complete all as specified and directed.
S&F in repair Stack clamps for 100 mm bore pipe made out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30 mm complete all as specified and directed.
S&F in repair steel tank cover with zinc coating, dia of cover 500 mm and height 150 mm of cut spherical shape and gas welding if spikes 2 mm dia and 50 mm length at 50 mm c/c both bay in zig zag motion with MS hinges 50 mm long medium weight, hasp and staple 100 mm long fixed to existing PVC water storage tank of any capacity and binded with barbed wire 2 mm dia and 2.24 mm bards 75 mm c/c all around the tank cover complete all as specified and directed.
Sethi Brothers
N.K. ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .