Construction of e-Rikshaw Charging Station at Phalain Mandal (Incl. cost of Electrification)

Amount

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8(1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete

Reinforced cement concrete work in beams, suspended floors, roofs having landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 50 mm thick with 20mm nominal size stone aggregate

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns

Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Providing and laying 80mm thick factory made cement concrete paver tiles of approved shape and colour of M-30 grade and laid in required pattern incl. bed of cement mortor, filling the joints with fine sand, cement dry mortor 1:3 mix etc (All complete as per the direction of Engineer-in-charge)

Providing and fixing M.S Mesh wire 25mm x 25mm x 3mm on top of B/wall

Providing and fixing of colour coated galvanized sheet 0.5mm thick incl. riveted bolt with bitumen washers complete job

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.50 mm thick with zinc coating not less than 275 gram/m2

Steel work welded in built up sections/framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing of wall tilesof approved brand and manufacturer laid in 12mm thick Cement Mortor 1:3 mix and grouting with white cement in pattern size and make and design as approved by Engineer-in-charge

Providing and fixing of HPL sheet (High pressure laminated sheet) 16mm thick as approved by Engineer-in-charge

Providing and fixing of stainless steel word on HPL sheet (High pressure laminated sheet) 12” height

Providing and fixing Stainless steel Signage Logo of JMC of size 12”

Supplying and Installtion of Focus flood light of 200 watt

Providing/Fixing of of Inauguration plate including writing (Complete Job)

Disposal of Malba from the site of work 5km by MT

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer Using M.S. angles 40x40x6mm for diagonal braces

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished welded type tubes

Providing and fixing Gate Roller Superior

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.

Making Soakage pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brickhoney comb shaft with common burnt clay (non modular) bricks of S.W drain pipedesignation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m longcomplete as per standard design

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc 15 mm dia. nominal bore

Providing and Fixing wash basin with C.I. brackets15mm C.P Brass waste of standard pattern, including paintings and fittings of brackets, cutting and making goods the walls wherever required white vitreous china flat back wash basin size 400x400 mm with single 15 mm C.P Brass pillar tap(Approved brand like Cera, Hindware, Parryware)

Wiring for light Points\Fan points\exhaust fan points with 1.5mm copper conductor cable with recessed\ surface PVC conduit (modular switch) as required

Wiring for circuit wiring with 2 x 4mm sq. with pvc recessed conduit as required

Wiring for circuit wiring with 2 x 2.5mm sq. with PVC recessed conduit as required

Providing and fitting of 3 pin5amp socket outlet of 5AMP SWITCH

Providing ang fitting of 20Amp socket outlet on 20 Amp Switch

Providing ang fitting of MCB box 6-32 Amp

Supply and fixing of set type fan regulator

Supply/ Fixing of PVC type Gang box suitable for 15/16 Amp switch and socket.

Supply and Installtion of Aluminium type maintenance free chemical, Earthing system Complete

Supply and fixing of 200 Amp. MCB three Phase four Pillar with panel including testing and Commissioning three Phase

Supply and fixing of four Core aluminium cable wire for supply line

Providing and fixing of Electric fan 48” of approved brand

Carriage of materials by Mechanical Transport a) Sand/Bajree for 10 Kms

b) Bricks for 15 Kms

RAKESH KUMAR GUPTA

Asif Mir Contractor