Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.8 LAccepted-AOC | L1 | Accepted-AOC BID OF M/S KB SINGHA AND ASSOCIATES IS HEREBY ACCEPTED BEING L1 BIDDER | |
| 2 | L2₹46.9 L+₹2.4 L (5.30%)Rejected-Finance PINE DALE PINE MOUNT RIDGE SHILLONG 793001 | EAST KHASI HILLS | MEGHALAYA | 793001 | L2 | Rejected-Finance REJECTED BEING L2 BIDDER |
Tender Value
₹45.5 L
EMD Value
₹91,000
Closing Date
5 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SHILLONG
GE SHILLONG SHILLONG DIVISION PIN 793002
SPL REPAIR WKS OF ALAO OFFICE (BLDG NO T 31) OF 39 COY ASC (SUP) TYPE A AND SPL REPAIR TO BDLG NO DM 31 (BLOCK OF FOUR QUARTER) UNDER GE SHILLONG
2023_MES_587544_2
GE/SHL/TOKEN-97 OF 2022-23
Open Tender
Civil Works
Item Rate
270 days
GE SHILLONG
ALL AS PER TENDER DOCUMENT
7 documents required · 7 mandatory
₹500
Yes
GE SHILLONG
₹91,000
Yes
30 Jun 2023
1 May 2023
6 Jun 2023
1 May 2023
5 Jun 2023
8 May 2023
Amount
Dismantling of floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) and area n exc 1.5 sqm each complete all as specified and directed.
Taking down chowkats but with shutters (without taking off shutters from frames) exc 1.5 Sqm but n exc 4 Sqm each complete all as specified and directed.
Taking down shutters of any description nexc 1.0 sqm refixing in same opening complete all as specified and directed.
Demolition of concrete of any description in any position not otherwise specifically provided for complete all as specified and directed.
Demolition and breaking up drain pipes 150mmdia (salt glaged stone ware AC or reinforced concrete pipe set in cm) complete all as specified and directed.
M & L PCC 1:4:8 type D2 (using 40 mm graded aggregate) as in Foundation filling and mass concrete complete all as specified and directed.
M & L 25mm thick PCC 1:-2:4 type BO (12.5 mm graded stone aggregate as in subfloors complete all as specified and as directed.
M&L for Non Skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc set and jointed in neat cementisrurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:6). complete all as specified and directed.
All as Per Item no here-in-above but in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:4 complete all as specified and directed.
M&L for Non Skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:6). complete all as specified and directed.
M&L for vitrified ceramic Tiles dark shed, 10 mm thick( square/rectangular), polished, area of each tiles n exc 0.36 sqm in floor etc , laid over 15mm thick screed bed 1:6, set and jointed in neat cement slurry and pointed in white / coloured cement to match complete all as specified.
All as above but on vertical surfaces over including 10mm thick rendering in CM 1:4.
M&L for Glazed ceramic colour tiles in vertical surface of size 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the tile colour including Screed bed or bedding, layer of mortar 10 mm thick for vertical faces in CM (1:4) complete as specified and directed
Dismantling of timber scantling 40 sqcm over in section in any position(unframed work) complete all as specified and directed.
M&L 2nd class hard wood in scantling clean sawn timber fixed all as specified.
S&F 30 mm thick 2nd class hard wood flush shutter solid core construction, ‘vitri block board core and plywood face panels, commercial type on both sides complete all as specified and directed
M&L glazed skeleton shutters open rebated and prepared to receive glass gauge etc(Without sash bars), edges of framing plain,chamfered or rounded , fitted with cut and mitred beads for securing glass etc 35mm thick of 2nd class hard wood complete all as specified and directed.
S&F for 2nd class hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put togetherwith qlue pinned at joints complete all as specified and directed.
S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm complete all as specified and directed.
S&F 18/19 mm thick pvc boards fixed with screws to timber frame complete all as specified and as directed
S&F Aluminium alloy, anodised, sliding door bolt with hasp staple (bolt type) 300mm size and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 100mm.
S&F aluminium anodised barrel bolts and fixed of 200 mm length
S&F Extruded Aluminium, anodised, bow handles of size 150mm.
S&F Continuous (Piano) hinges, brass, width of flaps 30 mm (when open) complete all as specified and directed.
S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in all as specified and as directed
S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 75mm.
M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for old steel surfaces of any description exc 10 cm in width or girth when unconnected with other painting surfaces complete all as specified and directed by Engr-in-Charge.
S&F in repair Vitreous china wash down water closet pan pedestal pattern white, excluding fixing bolts, flushing cistern but including flush pipe, seat and cover complete all as specified and as directed.
S & F in repair Vitreous china squatting pan of pattern 'long pan' size 580 mm white with 'P' or 'S' trap front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) complete all as specified and directed.
S&F in repair PVC valveless, 10 ltrs, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified.
S & F in repair for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and directed.
S & F in repair for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and directed.
S&F PVC (SWR) 110mm bore bends any radius
S&F PVC (SWR) 75mm bore bends any radius
S&F PVC (SWR) 110mm bore bends any radius with access door
S&F PVC (SWR) 75mm bore bends any radius with access door
S&F PVC (SWR) 75mm bore vent cowl
Dismantling water tanks exc 500 Itrs but not exc 1000 Its capacity, complete all as specified
Supply and fixing rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 500 ltrs in position incl float valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed all as specified and directed.
S/F Factory made solid panel PVC door shutter 30 mm thick (style) considering of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed togeather with solvent cement, fixing in the frame at site as per specification & drawing complete all as specified and directed.
Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforcement with M.S square tube, supplying & fixing in openings as per specification complete all as specified and directed.
Cutting chases,pining in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing steps, cills, sunshades,shelves,lintels,etc.; and cutting chases for concealed water tubing or concealed conduit.wiring,etc,and making good cutting not exceeding 10 cm girth in brick walls. complete all as specified and directed.
S&F in repair Concealed stop cock. Chromium plated, 15 mm, all as specified and directed
S&F PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repair Bib taps, cast copper alloy fancy type , screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repair Grating doom 100 mm dia of PTMT.(Minimum weight 25 gms) complete all as specified and directed.
M&L for cement concrete 1:3:6 type C2, 75mm thick as in plinth protection finished even and smooth with out using extra cement complete all as specified and directed.
M & L for PCC 1:3:6 C2 (40 mm graded aggregate) as in surface channels and drains complete all as specified and directed.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms,moulds,mitred/ stop ends complete all as specified and directed.
M & L for complete removal of existing treatment of walls including cornices, pilasters etc and applying two coats of distemper oil emulsion over a coat of 1 mm thick wall care putty and one coat of wall primer and complete all as specified and directed.
M&L for for applying two or more coats (over 1 mm thick plaster of paris wall care putty) of 100% premium acrylic emulsion paint having VOC less than gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surface on external surfaces including complete removal of existing treatment over wall and preparation of surfaces even and smooth complete all as specified and directed.
M&L for preparation of old wooden surfaces of any description over 10cm in width or girth and treated with one coats of synthetic enamel paint complete all as specified and directed.
Taking up or down steel tubing and connections of 15mm/bore complete all as specified and as directed.
All as per above item but in 20mm or bore of pipe
S&F G.I. pipe 15mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling and laid in floors complete all as specified
S&F G.I. pipe 20 mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling and laid in floors complete all as specified
Taking down plastering on lathing (other than wire-netting, without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered) complete all as specified and directed.
M&L for Rendering 15mm thick on fair faces of concrete surface of wall in CM (1:4) finished even and smooth without using extra cement all as specified
M&L for 15mm rendering in cement mortar (1:6) on brick/concrete surfaces finished the surface even and smooth without using extra cement complete all as specified and directed.
M & L for preparation of new walls surface and applying two coats of distemper oil emulsion over a coat of 1 mm thick wall care putty and one coat of wall primer and complete all as specified and directed.
M&L for for applying two or more coats (over 1 mm thick plaster of paris wall care putty) of 100% premium acrylic emulsion paint having VOC less than gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resitance, dirt resistance exterior paint gm/Itr and UV resistance as per IS 15489:2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surface on new or previously untreated surfaces all as specified and directed.
Supply only Integral water proofing compound
M/L 4.80mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pan complete all as specified and directed.
Dismantling wall and ceilling bords of any descr iption including cover fillets complete all as specified and directed.
M&L for 4mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws as in ceiling complete, complete all as specified and directed.
S&F aluminium snap grid frame work for false ceiling incl 6mm dia GI hanger (upto 1200mm length) adjusting level fixed to roof slab/truss/purlins/rafters @ 12.m C/C complete all as specified and as directed
Dismantling of plain/corrugated steel sheeting any gauge. thickness in roof covering complete all as specified and directed.
M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S&F pre painted galvatume aluminium zinc coating GI based plain steel sheet as in ridge of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Dismantling boarding any description fixed in any position with nails complete all as specified and directed
S&F 2nd class HW boarding 20mm thick fixed with nails in eaves board plained one side with butt joint complete all as specified and directed.
M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth and getting out in soft/loose soil,complete all as specified and directed.
M & L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
Mild steel joist channel or angle or tee section,ms tube and fixed with ms flat iron cut into shape drilled and fixed with screw conforming fe 410 complete all as specified and directed.
M&L Preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.
M&L 100mm thick cement concrete using (40mm graded aggregate) type D-2 (1:4:8) as in sub base complete all as specified and directed.
M&L for vitrified ceramic tiles (Paving dark shade,10 mm thick(square /rectangular), polished. area of each tile n exc 0.36 sqm in floor etc , laid over 15 mm thick screed bed 1:6 ,set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified.
S&F (20mm curtain rail) harrison rails, aluminium anodised alloy, with fixing brackets. stops, rollers etc 20mm dia complete all as specified and as directed
S& F of brackets decorative (Latto) for 20 mm dia curtain rails complete all as specified and directed.
Demolition of brick work or stone masonry built in cement mortar including all , dressed stone work and quoins arches. pillar etc but excluding ashlar facing ,precast artices complete all as specified and directed.
M & L for precast cement concrete block masonry with solid blocks exc 10 cm in width with PCC (1:3:6), type B-1. (using 20mm graded stone aggregate) and setting in CM(1:6) complete all as specified and directed.
M/L precast cement concrete block massonry with solid blocks next 10 cm in width and settings in CM 1:4 type Cl 1:3:6 (20mm graded aggregate) complete all as specified.
S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever barackets and connecting union to pipe overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and directed.
S&F Stainless steel kitchen plate rack of size 31" X 30' X 10" made out of stainless steel sheet of 1.00 mm with all accessories including taking down old unservicable one etc complete all as specified and as directed. (Make : Blue star, Cat No - BSKPR-314) or equivalent make of Prayag.
S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed
S&F powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash . aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws .anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no )complete all as specified and directed.
S&F in repair Vitreous china WHB size 550x400mm with pedestal including cutting or pinning in ends of brackets or erecting incl 32mm dia waste pipe complete all as specified and directed.
S & F in repair Brass CP tubular towel rail 20 mm dia : 60 cm long including brackets complete all as specified and directed.
S&F in repair Brass CP WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
S&F in repair Brass CP 2-in-1 Wall mixer for mixing hot & cold water screwed down for iron and fixed complete all as specified and directed.
S & F in repair Brass CP sink mixer with swinging provn for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
S&F in repairs corner glass shelf with bracket complete all as specified.
S&F in repairs 15 mm bore CP health Fouciet cock with Flexible pipe 1 m long complete all as specified and directed.
S & F in repairs CP Brass chromium plated shower rose 125mm size Chromium plated shower roses with or without swivel joints, any size. including fixing to steel pipe or union complete all as specified and directed.
Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified.
Material and labour for point wiring with single core PVC insulated unsheathed cable of size 1.5 Sqmm nominal area with multi-stranded FRLSH copper conductor, 1100 Volt grade drawn through and including PVC non metallic surface casing capping of suitable size with all fitting and accessories including PVC modular board of suitable size for housing/mounting the modular switches/sockets, etc top covered with plastic laminated sheet 3mm thick including 1.5 Sqmm PVC insulated unsheathed single core FRLSH copper conductor earth continuity wire connected to common earth dolly complete for one light/fan point controlled by one way switch including making good disturbed surfaces complete all as specified and directed.
All as per Item No. 101 here-in-before but for one 2/3 pin socket outlet, 5 Amps on same board, complete all as specified and directed.
All as per Item No. 101 here-in-before but for one bell point controlled by 1 Bell push , complete all as specified and directed.
All as per Item No. 101 here-in-before but for one 2/3 pin socket outlet, 5 Amps on independent board, complete all as specified and directed.
All as per Item No. 101 here-in-before but with FRLSH, ISI marked PVC insulated and unsheathed two single core multistranded copper cable of size 2.5 sqmm for one power point ,3 pin 15 Amps on independent board includingFRLSH, ISI marked PVC insulated unsheathed single core multi-stranded copper cable of size 2.5 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. Make- Cable- Finolex/RR cable/Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga.
Description all as per Srl item No.101. here in before but with 2.5 Sqmm cable for socket outlet point 5 Amp on Independent board.
Supply and fixing modular switch 1 way 6 A module 230/250 volt , AC supply, ISI Marked, with cover plate complete all as specified and directed.
Supply and fixing modular bell push 1 way 6 A module 230/250 volt , AC supply, ISI Marked, with cover plate complete all as specified and directed.
Supply and fixing modular sockets 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed.
Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed.
Supply and fixing modular switch 16A 1 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, c with cover plate omplete all as specified and directed.
S & F Modular cover plate with frame & flush box of 6 modules, Make- Legrand / Anchoor / vinay
S & F Modular cover plate with frame & flush box of 4 modules, Make- Legrand / Anchoor / vinay
S & F Modular cover plate with frame& flush box of 3 modules, Make- Legrand / Anchoor / vinay
S & F Modular cover plate with frame & flush box of 2 modules, Make- Legrand / Anchoor / vinay
S & F Modular cover plate with frame & flush box of 1 module, Make- Legrand / Anchoor / vinay
Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. Make : Cona , Plaza, Anchor .
Supply and fixing in repair call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed. Make- Havells/anchor/ Legrand.
Supply and fixing LED batten fittings 1x 20 Watt complete including LED light driver, holder, LED lamp and connection up to ceiling rose with three core wire fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one .
S & F Wall bracket decorative LED Spot light Light fitting with lamp 10 Watt Aluminium housing complete with necessary connection including taking down old unserviceable one
S&F in repair lamp holder, insulated body, with back plate for batten fitting complete. Make- Havells/anchor/Legrand.
Supply and fix in repairs LED lamp 7 Watt B22 base Color Temp 6500 K complete including taking down old unserviceable one all as directed. Make Phillips/Bajaj
S & F in repair of LED / Bulk head Light fitting with lamp 1 x 9 watt including LED light driver, holder, LED lamp and connection up to ceiling rose with three core wire complete with necessary connection including taking down old unserviceable one complete all as specifed and directed.
Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specifed and directed.
Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star rated vertical type includng fixing of bolts , nuts grouted into the wall , and necessary cement work , making good of disturbed surface of wall , giving electric and water connection and testing after installation complete all as specifed and directed.
S & F Exhaust fan 230 volts , 250mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall Make Bajaj/Havell's/CG.
S & F in repair single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB complete all as specifided and as directed Make- Legrand/L&T/ C&S
Supply and fix in repairs MCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified. . (Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule . Note : Copper thimble shall be used for connection of cable .
Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.
Supply and fix MCB TPN, 240 Volts, 40 to 63 Amps, 10 kA rupturing capacity415 Volts complete all as specified and directed including taking down old one.
Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one. Make: Havells Cat part No - DHMCCDPF006-032 or equivalent in Schnieder/GE/C&S.
Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's.Make : Hager as per cat part- NCN106N, Schneider as per cat No : A9N4P32C or Indoasian as per cat No : 81195.
Material and labour for sub main wiring with two single core 4.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 4.0 sqmm green colour as earth lead including PVC casing capping of suitable size complete all as specified and directed, including taking down unservicable one.(Note: two run of 4.0 sqmm cable , one run of earth wire of 4.0 sqmm and one run of PVC casing capping shall be measured as one length).Make- Cable- Finolex/RR cable/Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga.
Taking down existing energy meter and refixing the same after completion on the original location all work all as directed by Engr-in-Charge
Taking down existing water heater of any capacity and deposit the same at AGE E/M Store yard complete all as directed by Engr-in-Charge
Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I including taking down old one complete all as specifed and directed.
Supply, laying & testing cable XLPE insulated PVC inner sheathed, armoured with galvanized steel strip or wire heavy duty underground with stranded aluminum conductor 35 sqmm 4 Core 1100 Volts grade including laid in trenches,earth work/excavation, sand filling, bricks / duct passing through pipe / duct or fixed on pole and connecting and testing incl taking down old one complete all as specified and directed.
S&F Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed.
S&F Switch socket combination 2 in 1 5A/16A, 3 pin 1 flush type universal complete all as specified and directed.
S&F Switch socket combination 2 in 1, 5 A flush type complete all as specified and directed.
S&F socket outlet 2 in 1, 5 A flush type complete all as specified and directed.
Supply and fixing LED batten fitting 18 Watt fixed to wall with 2 nos PVC block of suitable size complete all as specified and directed including taking down old unserviceable light fittings complete all as specifed and directed.
Supply & fixing bell push, 6 Amps, Flush type, Single pole, one way, modular, 230 volts complete all as specified and directed. Make : Anchor/SSK/Havells
M&L ceiling rose, 3 terminals PVC/polycarbonate, isolated body complete all as specified and directed.
S & F LED Luminaries 600mm x 600mm 36 watt, 220 V, AC recessed type with hifg efficiency PMMA diffuser soft galre free light complete with driver, holders and LED lamps suitable for roof ceiling including connecting up with 3 core flexible wire complete all as directed and specified.
Supply and fix MCB Distribution board , 240 volts Single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection including taking down old unserviceable one complete all as specifed and directed.
Supply and fix MCB SPN, 240 Volt, 32 Amps, 10 kA rupturing capacity 'C' series including taking down old one complete all as specifed and directed.
Supply and fix MCCB Distribution board , 415 volts verticle triple pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 4 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed including taking down old unserviceable one.
Supply and fixing in repair MCCB four pole 63 Amps, 415 Volts including taking down old one complete all as specifed and directed.
M/s A L Traders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .