Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.3 LAccepted-Finance | L1 | Accepted-Finance As per BOQ | |
| 2 | L2₹15.4 L+₹1.1 L (7.68%)Accepted-Finance | L2 | Accepted-Finance As per BOQ | |
| 3 | Rejected-Technical | - | Rejected-Technical As per document found |
Tender Value
₹14.1 L
EMD Value
₹28,130
Closing Date
12 Dec 2023, 10:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SO-1 (Wks)
HQ 9 Sect AR, Keithelmanbi (Manipur)
NIT for Additional/ Alteration to existing 03 x Guard rooms and URC bldg for provn toilets for Ladies/ Gents of No 4 Wksp AR (S)
2023_ARMHA_781903_1
9 Sect/Engr/Addn/2023-24/12
Open Tender
Civil Works
Works
180 days
No 4 Wksp Assam Rifles, Keithelmanbi
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
DIG Assam Rifles
₹28,130
16 Jan 2024
21 Nov 2023
13 Dec 2023
21 Nov 2023
12 Dec 2023
21 Nov 2023
21 Nov 2023 - 12 Dec 2023
Amount
SCHEDULE `A' PART-I (ADDN/ALTN TO EXISTING GUARD ROOM)
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer. (Make: Cera/ jaguar/ Prayag/ Hindware/ Parryware or equivalent quality approved by Engr-in -Charge).
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. (Make: Cera/ jaguar/ Prayag/ Hindware/ Parryware or equivalent quality approved by Engr-in -Charge).
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms.
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.17.28.1.1 32 mm dia.
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge.Internal Exposed on walls 18.4.1 PN - 16 Pipe, 20mm OD (SDR-7.4) (Make: Supreme/ Ashirvad/ Finolex/ Prince or equivalent quality approved by Engr-in -Charge).
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge.Internal Exposed on walls. PN - 16 Pipe, 25mm OD (SDR-7.4). (Make: Supreme/ Ashirvad/ Finolex/ Prince or equivalent quality approved by Engr-in -Charge).
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :18.17.1A 20 mm nominal bore
Providing and fixing brass bib cock of approved quality :18.15.1 15 mm nominal bore . (Make: Cera/ jaguar/ Prayag/ Hindware/ Parryware or equivalent quality approved by Engr-in -Charge).
Providing and fixing uplasticised PVC connection pipe with brass unions :18.21.2.1 15 mm nominal bore.
Wiring for light point/Fan point/exhaust fan point/call bell point with1.5sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed PVC conduit,with piano type switch, phenolic laminated sheet, suitable size MS box/ uPVC and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.are required.Group A. (Make: Anchor/ Havells/ Legrand/ L&T/ Polycab or equivalent quality approved by Engr-in -Charge).
Wiring for light/power plug with 2x2 Sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed PVC conduit alongwith 1 No. Sqmm FRLS PVC insulated copper conductor single core cable for loop earthing as required. (Make: Anchor/ Havells/ Legrand/ L&T/ Polycab or equivalent quality approved by Engr-in -Charge).
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of uPVC/ phenolic laminated sheet cover in front including painting etc.as required. 150mmx75mmx60mm deep
Supplying and fixing followig modular switch/socket on the existing modular plate and switch box including connection but excluding modular plate etc. As required 5/6 A switch. (Make: Anchor/ Havells/ Legrand/ L&T/ Polycab or equivalent quality approved by Engr-in -Charge).
Supplying and fixing followig modular switch/ socket on the existing modular plate and switch box including connection but excluding modular plate etc. As required 15/16 A switch. (Make: Anchor/ Havells/ Legrand/ L&T/ Polycab or equivalent quality approved by Engr-in -Charge).
Supply and fixing 3 pin, 5A ceiling rose on the existing junction box/wooden block including connection etc. As required. (Make: Anchor/ Havells/ Legrand/ L&T/ Polycab or equivalent quality approved by Engr-in -Charge).
SCHEDULE `A' PART-II (TOILET FOR LADIES/ GENTS TO URC BLDG)
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan incl getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge in all kinds of soil
Earth work in excavation by mechinical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 15 m, including geeting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone Aggregate 20 mm minal size
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size )
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, helves, chajjas, lintels,bands, plain window sills, staircases and spiral staircases above plinth level up to floor five level excluding the cost of centering, shuttering,finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size )
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, plinth beams
Centering and shuttering including strutting, propping etc. and removal of form for Beam with water proof ply 12 mm thick
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)
15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand)
Supplying, laying, spreading and compacting stone aggregate of specified sizes 53 mm to 22.4 mm size in uniform thickness, hand picking, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate,watering and compacting to the required density .
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm nominal size stone aggregate
Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
Providing and laying vitrified floor tiles in Size of Tile 300x300 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (Make: Kajaria/ Somany/ Orient Bell /Cera/ Johnson/ Vermora or equivalent quality approved by Engr-in -Charge).
Providing and laying Vitrified tiles in any sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade,in dados, skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints. (Make: Kajaria/ Somany/ Orient Bell /Cera/ Johnson/ Vermora or equivalent quality approved by Engr-in -Charge).
Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm . (Make: Asian Paint/ Nerolac/ Dulux/ Berger Paint or equivalent quality approved by Engr-in -Charge).
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.13.42.1 Two or more coats on new work . (Make: Asian Paint/ Nerolac/ Dulux/ Berger Paint or equivalent quality approved by Engr-in -Charge).
Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100 mm x 37 mm with wall thickness 2 mm (± 0.2 mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos of plastic brackets of size 75 mm x 220 mm at each corner and stainless steel screws, reinforcing the hinge side of style by inserting PVC profile of size 28 mm x 30 mm, with wall thickness 2 mm ( ± 0.2 mm). Lockrail of size 100 mm x 37 mm, wall thickness 2 mm (+ 0.2 mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100 mm x 20 mm, and inserting 2 nos tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturer's specification and direction of Engineer-in-charge.
Providing and Fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x 53 mm, having wall thickness 2.0 mm (± 0.2 mm). Both verticalssides of the frame reinforced with PVC profile of cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2 mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut, jointed and fusion welded together, including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener, all complete as per manufacturer specification and direction of engineer-in-charge.
Providing and fixing on wall face unplasticised Rigid PVC sewage pipes conforming to IS : 13592 Type A, including jointing with solvent Single socketed pipes 110 mm diameter. (Make: Supreme/ Ashirvad/ Finolex/ Prince or equivalent quality approved by Engr-in -Charge).
Providing and fixing on wall face unplasticised Rigid PVC sewage pipes conforming to IS : 13592 Type A, including jointing with sovlent Single socketed pipes.75 mm diameter. (Make: Supreme/ Ashirvad/ Finolex/ Prince or equivalent quality approved by Engr-in -Charge).
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. (Make: Cera/ jaguar/ Prayag/ Hindware/ Parryware or equivalent quality approved by Engr-in -Charge).
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer. (Make: Cera/ jaguar/ Prayag/ Hindware/ Parryware or equivalent quality approved by Engr-in -Charge).
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. (Make: Cera/ jaguar/ Prayag/ Hindware/ Parryware or equivalent quality approved by Engr-in -Charge).
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 mm dia
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge.Internal Exposed on walls PN - 16 Pipe, 20mm OD (SDR-7.4).
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. Internal Exposed on walls 18.4.2 PN - 16 Pipe, 25mm OD (SDR-7.4)
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
Providing and fixing brass bib cock of approved quality 15 mm nominal bore. (Make: Cera/ jaguar/ Prayag/ Hindware/ Parryware or equivalent quality approved by Engr-in -Charge).
Providing and fixing uplasticised PVC connection pipe with brass unions 15 mm nominal bore
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, lvelling & dressing & finishing the top smooth.
Wiring for light point/Fan point/exhaust fan point/call bell point with1.5sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed PVC conduit,with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.are required.Group A. (Make: Anchor/ Havells/ Legrand/ L&T/ Polycab or equivalent quality approved by Engr-in -Charge).
Supplying and fixing metal box/ uPVC of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc.as required. 150mmx75mmx60mm deep. (Make: Anchor/ Havells/ Legrand/ L&T/ Polycab or equivalent quality approved by Engr-in -Charge).
SCHEDULE `A' PART-III (SEWAGE DISPOSAL WK i.e., SEPTIC TANK 10 USERS WITH SOAK PIT & MANHOLE CHAMBER)
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and lift upto 1.5 m, disposed soil to be levelled and neatly dressed : All kinds of soil
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in fdn trenches or drain (n exc 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5m, incl getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kind of soil
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster
Extra for providing and mixing water proofing material in cement per bag of plaster work in proportion recommended by the manufacturers.
Centering and shuttering including strutting, propping etc. and removal of form work for : Suspended floors & septic tank RCC cover slab
Centering and shuttering including strutting, propping etc. and removal of form work for : Walls (any thickness) / baffle wall.
Centering and shuttering including strutting, propping etc. and removal of form for :Edges of slabs Under 20 cm wide
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Amardeep Singh
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .