ADDN ALTRN AND IMPROVEMENT TO EXISTING WORKER CHANGING ROOM AT CERTAIN STORE HOUSE AND PROVN OF TOILET NEAR GCP ON B ROAD AND REPAIRS TO ROOF SHEETS OF BUILDING D3 AT MO (MB) GHATKOPAR UNDER GE(NW) BHANDUP

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/ loose soil complete all as specified and directed.

M&L for Plain Cement concrete type D2 1:4:8 (40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M & L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M&L for Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed complete all as specified

M&L RCC type B1 1:1.5:3 (using 20mm graded aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mas complete all as specified and directed.

M&L RCC type B1 1:1.5:3 (using 20mm graded aggregate) Columns, pillars, piers, posts and struts complete all as specified and as directed

M&L RCC type B1 1:1.5:3 (using 20mm graded aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed

M&L RCC type B1 1:1.5:3 (using 20mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 100mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring complete all as specified and directed.

M & L for TMT steel bars 10 mm dia and over, cut to n length , bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or resecuring with clips complete all as specified and directed.

All as per item No.11 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

S&F aluminium section in doors/windows/ventilators ,kitchen cupboards, built n almirah doors any type, powder coated in approved colour (Thickness of powder coating not less than 50 micron), aluminium section (medium weight of series 'B') or section as directed by Engineer-in-Charge, cut to size, jointed together with cadmium plated steel screws including rubber beading or gasket for aluminium sections for fixing glass/XPM jali or for fixing bakelite sheet and all necessary fittings complete, screws, plugs for fixing screws, etc all as specified and directed Notes : (i) Weight of aluminium sections shall only be measured. (ii) The supply only rate of bakelite sheet glass pane,wire mesh and rubber beading or gasket will be measured separately.

Supply only 4mm thick figured glass/pin headed type ordinary quality fixed in aluminium ventilator n exc 0.50 Sqm each pane complete all as specified and directed.

Supply only Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples fixed in aluminium windows/wooden doors complete all as specified and directed.

S&F stainless steel butt hinges 125mm size medium wt coIled rolled complete all as specified and directed.

S&F anodised aluminium extruded handles 150 mm size complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section 200 mm size complete all as specified and directed.

S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails . MS frame shall be covered with heat moulded palin colour PVC 'C" channel having a PVc sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVc sheets for top rail , lock rail & bottom rail on either side & as gap insert for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the M s frame welded/sealed to the stiles & rails with suitable PVc sheet beading and joined together with solvent cement ,supplying & fixing in the frame at site as per specification & drawing.

S&F solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specification & drawing.

M&L precast cement concrete block masonry in PCC 1:3:6 type C1 with solid block exc 10cm in width and setting in CM 1:6 complete all as specified and as directed.

M&L for brick work with sub-class 'B' bricks, straight, or curved on plan to any radius as in half brick thick wall in CM 1:4 complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work in CM 1:6 and 5mm thick in CM 1:4 including water proofing compound, finishing even and smooth without using extra cement. (WPC shall be measured and paid separately)

M&L for plastering in CM 1:6, 10 mm thick on walls finished even and smooth w/o using extra cement.

M&L for plastering in CM 1:3 , 5mm thick on ceiling finished even and smooth without using extra cement

M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed

M & L for preparation of new plastered surfaces of walls and applying Two coat of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for two coats of antifungal paint (Apex ultima Protek of Asian Paints or equivalent in approved makes) over a coat of exterior primer (Professional pack of Asian Paint) on newly prepared plastered external surfaces and including scaffoldings and cradle including hoisting and lowering as required with bracing, support complete all as specified and directed by Eng-in-Charge

M&L for Non-skid ceramic tiles (Coloured) 7 to 8mm thick rectangular area of each tiles exc 0.06 sqm n exc 0.11 sqm in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 laying floor finished complete all as specified and directed Notes: while fixing tiles, joint width between two tiles shall be maintained using tile spacers and filling the tile joints with three component epoxy resin based tile joint filler of approved make complete all as specified and directed.

M&L for glazed ceramic coloured tiles 450x300mmx7mm thick in vertical surfaces such as skirting/dado and risers to steps and including over 10mm thick rendering in CM 1:3 on fair faces of brick/concrete surfaces as in backing coat for tiles. etc, all as specified and directed.

M&L for 18-20mm thick granite (of any type) work table rubbed and polished as in steps, jambs, pillars, door and windows-cill, cooking platform, jambs, wash hand basin platform and the like in CM 1:4 including pointing in white/coloured cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting of oval shape for fixing of counter sunk wash hand basin etc over and including 10mm thick rendering/screed in CM 1:4 on fair faces of brick/ concrete surfaces complete all as specified and directed.

M&L for rounding to edges of stone slab one edge , such as in steps , cooking paltforms , and similar situations complete all as specified and directed.

S&F white oval counter top wash basin of size 56 x 41cm including waste coupling complete all as specified.

Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gm) complete all as specified and directed.

S&F Vitreos china urinals, half stall type (back or corner wall type), complete including providing and fixing plugs , bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws , pointing around urinal back in cement; fixing automaticflushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F Health faucet with 1.5mtr tube & hook cat No BEA-40 of Prayag polymers pvt ltd complete all as specified and directed.

S&F CP angle cock 15mm bore fancy type chromium plated.with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F Soap dish, Stainless steel fancy type approx size 160x160x90mm of make Jaquar CAN-CHR-1131 N or equivalent complete all as specified and directed.

S&F Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

S & F vitrious China pedestal pattern WC incl PVC seat cover (White) etc complete all as specified and directed.

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including S trap connection to trap , anti syphonic pipe etc complete all as specified and directed.

S & F PVC low level flushing cistern 10 Ltr capacity incl float valve and flush pipe complete all as specified and directed.

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC inlet connections 45 cm long, 15 mm bore with PTMT nuts complete all as specified and directed.

S&F SWR bends 110 mm dia of any radius with access door complete all as specified and directed.

S&F PVC SWR 75 mm dia single (Single T) equal of unequal complete all as specified and directed.

S&F 50mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps8mm dia with two nuts wall nails etc complete all as specifed and directed.

S&F 110mm bore PVC (SWR) pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps8mm dia with two nuts wall nails etc complete all as specifed and directed.

S&F CPVC pipe 150 mm bore SDR 11and plain CPVC SDR 11 fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and directed.

All as per item No 51 above but 20 mm bore etc, complete all as specified and directed.

S&F CP bib tap 15mm bore fancy type with crutch or butterfly handle, screwed for iron pipe or for unions complete all as specified and directed.

S&F for 20mm bore sink cock swan neck (wall ountinstallation) type with chrome finish complete all as spd and directed.

S&F in 500 ltrs Rotational mould polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in ssr part-I complete all as specified and directed.

S&F Ball brass valves,high pressure, with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F chromium plated fancy type shower roses 180mm size with or without swivel joint including fixing to steel pipe or union etc.complete all as specified and directed.

S&F for CP concealed stop cock 15mm bore fancy type chromium plated.with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

M&L for Supply and application of 5 layer SHR water proofing coating system on leaking concrete surface by thorough surface preperation followed by one absorption coat of Thermacool WP 51, nano tech modified, UV resistant elastomeric clear coat having min. 50% solids, then over coating with 2 coats of Thermacool WP 51 + cement mixture as water proof coating having +450% elongation, tensile strength min 2.2 MPa and then top coated with 2 coats of Thermacool 0.3 C pure acrylic based UV resistant, non yellowing bio organism resistant ( anti fungal, anti bacterial) Solar IR heat reflective coating confirming to BIS STD IS 17218:2019 with pull off adhesion 2.8 MPa, passes 20 hrs accelerated durability test , suitable for all types of cementitious surfaces, white colour, matt , surface coverage 3.25sqm/ltr/2 coat , DFT 100-120 microns using brush roller, airless spray gun as applicable. The product should have been tested at IIT or NABL approved lab and application is to be done by Thermacool approved applicator only. Or equivalent make of Dr.Fixit/ BASF/Fosroc/Tikitar with their specification with authorised applicator with 10 year guarantee

M&L cement concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC 1:3:6 type C2 with 40mm graded aggregate, dia of pipe 150mm complete all as specified and directed.

M&L Providing precast cement concrete in cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, shelves and similar articles with plain faces, Type B1 1:2:4 (20mm graded aggregate) set in cement mortar 1:6 complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for hume pipe septic tank 25 users capacity incl AC vent pipe, earth work excavation in soft/loose soil, erecting hume pipe septic tank in position, PCC 1:3:6 and all other accessories required such as vent cowl etc and making good the disturbed surface and removing surplus soil and old u/s septic tank, complete incl connecting to the sewer line etc complete all as specified and directed.

Dismantling wrought iron or milt steel work of any description not other wise provided for complete all as specified and directed.

Dismantling of wall and ceiling board (fibre, pulp,insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets etc complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frames) exceeding 1.5 Sqm but not exceeding 4.0 Sqm each complete all as specified and directed.

Taking down chowkets or frames not exc. 1.5 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone wall including raking out joints, hacking for key, scrubbing down with water etc and disposing off the rubbish outside MD land complete all as specified and directed.

M&L Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

M&L for 20 to 25mm mirror polished kota stone slab for flooring laid over cement screed bed and jointed with grey cement slurry mixed with pigment to match the shade of of the slab including rubbing and polishing including over 15mm thick screed bed or bedding layer in CM1:4 complete all as specified and as directed.

M&L for Formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

Supply only stainless steel wire cloth of 0.63 mm nominal dia of wire and average width of aperture 1.40 mm , fixed in aluminium windows complete all as specified and directed.

S&F aluminum anodised grill DG- 202 ( 10 mm x 7.5mm ) of Deco grill or equivalent fixed with 'F' section size not less than 20.60 x 15.20 x 1.5mm thick complete all as specified and directed. Note : (i) Make shall be as approved by the GE. (ii) Minimum thickness of anodizing shall be 15 microns.

S&F II nd class Hard Wood as in plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc all as specified

S& F 2nd class HW 35 mm thick,plain, framed, panelled shutters (any numbers of panels), with pannels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face neneers;fixed to chowkats complete all as specified & directed.

S&F 100 mm stainless steel butt hinges,complete all as specified and directed

S&F 150 mm length extruded aluminium alloy handles,fabricated type, anodised complete all as specified and directed

S&F PVC insulation panels of 40mm thick with EPS stuck to 2mm PRINTED PVC sheet in (top 1mm and bottom 1mm pvc sheet with EPS) suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification directed by Eng-in charge

S & F anodised aluminium snap grid frame work (605 x 605mm) for false ceiling complete all as specified and directed.

S & F handger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed.

S & F MS sections as in framing for cladding, ceiling, glazing and the like fixed with angle cleats and connecting plates etc complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and thereafter applying with roller Two coat of oil bound distemper including application of white cement based wall care putty finish for smooth finish.etc complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying Two coat of oil bound distemper including application of Birla wall care putty for smooth finish.etc complete all as specified and directed.

Chipping, removing carefully loose/damaged concrete including plastering (total thickness exceeding 40mm but not exceeding 60mm ) from surfaces of RCC members, in any location by low impact Hammer/Breakar without damaging the structure & cleaning the surfaces with wire brush etc and disposal of debris out side MOD land complete all as specified and directed. Note : 1) Hard concrete shall not be removed by force

M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hour between the coats, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.)

M&L for carry out application of ‘Bi-polar migratory corrosion inhibitor' [Make : M/s. Krishna Conchem (EPCO KP-100) / BASF (MasterProtect®8000Cl)] on RCC surfaces, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.)

M&L for Anticorrosive Treatment to Reinforcement using IPNET-RB of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces complete all as specified and directed . Note :- Mode of measurement: superficial area of concrete will be measured.

M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar / concrete to ensure bond between old concrete & new concrete/ new mortar by brush application, complete all as specified and directed.

M&L for building up the profile of structural members using polymer modified mortar from M/s Krishna Conchem (Molith PMM) OR Polymer mortar HB of Dr. Fixit, exceeding 20mm thick and not exceeding 40mm thick in two layers, each of equal thickness including levelling, profilling etc, complete all as specified and directed.

M & L for TMT steel bars 10 mm dia and over, cut to n length , bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or escuring with clips quality confirming to

M&L for post construction ATT treating soil under existing floor at internal junctions with wall using chemical emulsion @ 1.00 ltr per hole , 300 mm apart including drilling and plugging 12 mm dia holes with CM 1:2 to match the existing floors , all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surface of any discription not otherwise discribed over 10 cm width or girth complete all as specified and directed.

M&L for treating points of contact of wood work with masonary / concrete by chemical emulsion (in oil or kerosene based solution) @ 0.50 litre/hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same all as specified and directed.

Dismantling asbestos cement (corrugated semicorrugated, etc) sheets in roof covering including ridge, north light curves etc complete all as specified and directed.

S&F for Pre- Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping ,drilling of screws/suitable length GI 'J' or 'L' hooks in roof complete all as specified and directed.

S&F for Pre- Painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/rigdes, fixed with self tapping ,drilling of screws/suitable length GI 'J' or 'L' hooks in roof, including necessary scaffolding etc complete all as specified and directed.

S&F for roof trusses (framed) trussed, Purlins, crane gantries, rails and fastenings and heavy brackets framing(Beam, Angle, Channel or flat section,plain plates) including distance pieces, cleats ,welding and braceing etc,Fe-410W(Gde-E-250)quality -B, including necessary scaffolding etc complete all as specified and directed.

M&L preperation of new steel Surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified

M&L preperation of old steel Surfaces of any description, over 10cm in width or girth, and applying one coat of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified

M & L for formwork to sides of concrete foundations, footings bases of colomns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter with rough finish complete all as specified and directed.

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work nor exceeding 200mm thick (Horizontal or sloping) with rough finish complete all as specified and directed.

M&L for formwork to sides of pillars, posts , struts, piers, columns and stanchions with rough finish complete all as specified and directed.

M&L for PCC 1:4:8 D-2 (using 20mm graded crushed stone aggregate) as in sub base of floor (100mm thick) finished even and fair complete all as specified and directed.

M&L for Reinforced concrete pipes class NP 2 of 150mm dia laid and jointed complete with coilars complete all as specified and directed.

M & L for concealed point wiring complete with proper colour coding using, 1100 Volts grade, 1.5 Sqmm, PVC insulated FRLS, unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked drawn in and including PVC conduit (minimum 20mm dia) concealed in wall etc (also including cutting chiseling in wall and making good the same in CM 1:3 to match with the adjoining surfaces) with all accessories, fittings, PVC junction boxes etc, also including 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts multistranded copper conductor green colour as continuous earth wire connected to common earth dolly all as specified and directed for one light point /fan/bell point controlled by one one way switch, complete all as specified and directed. Note: Modular flush box and inner/outer plates measured and paid separately.

All as per item No.108 above but for One 2pin/3 pin socket outlet 5 Amps on same board with other switches , complete all as specified and directed.

M&L for point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and in and including PVC concealed conduit having thickness not less than 2 mm with all fittings including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly.and including cutting chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching existing colour and all as specified . Note: colour coding is to be maintained .(Ph-Red, N-Black, Half-Yellow, Earth- Green)(Make of copper wire:Legrand/Polycab/Havells and PVC conduit Make: Precision,Plaza) Note: Modular flush box and inner/outer plates measured and paid separately.

M&L for ceiling rose three terminals AC 240 volts 50Hz complete all as specified of make: Havells/Legrand/Cona

Supply and fixing modular ceiling fan regulator 120 watt 2 module complete all as specified and directed.

M&L for switch modular one way 6/5 amps 1 module complete all as specified.of make: legrand/ Havells/Roma

M&L for switch modular one way 6/5 amps 1 module complete all as specified.

M&L for switch modular one way 16/20 amps 1 module complete all as specified.

M&L for socket modular 6Amp 2/3 pin combined 2 module complete all as specified and directed.

M&L for socket modular 16/20 Amp 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix in repairs sheet metal enclosure powder painted for MCB DB SPN 4 way double door with din rail and 200 Amp bus bar complete all as specified and directed. Make: Legrand/Schneider/Siemens

Supply and fix in repairs MCB SP 240 Volts 6 to 32 Amps breaking capacity 10 KA,B Curve rating complete all as specified and directed.Make -Legrand/Schneider/Siemens

Supply and fix in repairs MCB SPN 240 Volts 6 to 32 Amps breaking capacity 10 KA,B Curve rating complete all as specified and directed.Make -Legrand/Schneider/Siemens

Supply and fixing modular metal flush box 1/2 module complete all as specified and directed.

Supply and fixing modular metal flush box 3 module complete all as specified and directed.

Supply and fixing modular metal flush box 8 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame 1/2 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame 3 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame 8 module complete all as specified and directed.

Material and Labour for tube light fitting LED 20 watt with decorative end caps made out of CRCA sheet powder coated complete with housing with aluminium heat sink on back of leds ,power factor >0.9,having inbuilt surge protection device for overvoltage protection with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 from ceiling rose/PVC connector to light fitting and shall be fitted on new plastic square/round block complete all as per specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) omplete all as per specified and directed

Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size upto 300mm sweep with, blades, and frame complete all as specified and directed

Taking down carefully unserviceable point wiring of any type & pattern (Light/Fan/Socket or power) including unserviceable fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings of any type etc and making good disturbed surfaces of walls/ roof etc complete all as specified and directed.

Supply and fixing modular metal flush box with inner plate & outer frame 6 module complete all as specified and directed.

Supply and fixing modular metal flush box with inner plate & outer frame 12 module complete all as specified and directed.

Supply and fixing for electronic circuit PCB for BLDC Ceiling fan of 1200 mm sweep etc complete all as specified and directed .

Taking down existing ceiling fans and re-fixing the same ceiling fan including provisioning of cable from celing rose to c/ fan and spry painting of ceiling fan with two coats of synthetic enemal paint complete all as specified and directed.

Supply, lay test & commissioning cable LT XLPE insulated and screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with standard alminium conductor, 1100 volts grade of size 10 Sqmm, 4 core complete all as specified and directed.

Supply and laying HDPE pipe of pressure rating 6 kgf/cm2 (PE-63 grade) of size 32 mm bore laid trenches for passing of cable complete all as specified and directed.

Suppy and fix in repairs gun metal valve with iron wheel head screwed both ends for iron pipe for 25 mm complete all as specified and directed.

M& L for drilling and taping cast iron water mains (in position) for branch connection of the internal dia 25 mm complete all as specified and directed.

Deduct Credit for Demolished/ Dismantled material Rs. (-) 27,785.00 (Minus) as listed in Schedule of Credit Note1: Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum' Note 2:- The tenderer must keep in mind when quoting rates against items out in multiple store house having height 4 mts to 7 mts. Necessary scaffolding and saftey measures required during execution of work are including in this items.

AMBICA ENGINEERING (BID ID -3172246)

Advait Enterprises (BID ID -3165499)

M/s Qureshi Construction Co (BID ID -3163033)