Establishment of 7.5 Ton per day capacity ice making plant (Ammonia) at Mahe region on TurnKey Basis

Ammonia Compressor -1 AMMONIA COMPRESSOR with fly wheel, motor pulley, pressure gauges, toolkit, service kit, Shut off valves for suction, discharge line, compressor bolt & nuts, base frame, belt with guard and gasket set. Control panel comprising of LP, HP& OP cutouts with necessary internal wiring. Hydrostatic test pressure :28.17Kg/cm2 Max. allowable working pressure: 19.27 kg/cm2 Rotation speed max/ min.1200/600RPM. MAKE: FRICK/ KIRLOSKAR

Compressor motor: Make: Kirloskar/ Siemens squirrel cage induction motor 30HP/ 3phase/ 1440 RPM with Roller bearing moveable belt arrangement and stud bolt & nuts.

Ammonia Oil separator of size 18”x24” long with flanged connection.

Atmospheric type ammonia condenser, each having a single row of 12 pipes, hight x 6.1m (20’) long, constructed of 50mm(2”) of M.S. ‘C’ Class TATA make a pipe with liquid, gas and water sprinkling headers.

Ammonia receiver of size 16”x11’ long with liquid inlet and outlet valves, Safety valve, air purge valves, Charging valve and gauge glass with valves.

M.S. Ice Freezing tank to accommodate 150nos. of 50kgs (110 LBS) ice cans having a thickness of 6mm for bottom and side walls, complete with necessary M.S. angles & channels as a stiffer for the freezing tank including M.S. Supporting angles. The trunk coil partition in a size of 4mm sheet . The brine tank comprising of Agitator, Cooling coil with Accumulator

Thermocole insulation for freezing tank of thickness 75mm in 2 layers (75mm+75mm) of density 25kgs. For bottom & side.

85 - 25 Grade Bitumen and tar pelt roll

Refrigeration trunk type evaporative cooling coil made from 32mm (11/4 “) black heavy duty pipe and TATA ‘C’ Class header heavy duty pipe of size 4” header pipe, containing 1200RFT of pipe length with header and accumulator of suitable size with expansion valve. Suitable accumulator with flanged type valves, fittings and pipes to be provided

Vertical type brine tank agitator size of 12” dia. And motor pulley with V-belts

Agitator motor size 3HP/3phase/ 50 cycles for the operation on 440/400 Volts. Make: Kirloskar/Siemens

Ice cans size 8”x16”x36” made out of 16 gauge G.I sheet of each 50kgs capacity (110LBS)

Electric hoist crane ends with beams and rails.

Condenser motor with water circulation pump size 3HP/ 3phase/ 50 cycles for the operation on 440/400 Volts. Make: Kirloskar/Siemens.

Wooden frame, wooden cover works, wooden supporting angles and wooden partition to the each cans by strong wood/ using Jambal/ Bent Teak wood for supporting of ice cans.

Ammonia valves, fittings and pipes.

G.I pipes, M.S. Pipes, Bolt nut, Copper hooks, Paint and other fittings

Necessary insulation provision to suction line & Accumulator line etc to be provided

Panel board cubical type along with Electrical wiring material for power wiring, control wiring and earthing.

Separate switch board to compressor, agitator, condenser and water pump to be provided

First charge of Brine solution, Ammonia gas and compressor oil for the commissioning of the ice plant.

Ice crusher suitable for 50kgs of ice block.

Motor for ice crusher 5HP/3phase/50 Cycles, operation on 400/440volts Make: Kirloskar/Siemens,

Ice can dump for ice delivery is on double ice and suitable for 50kgs.