CERTAIN SPECIAL REPAIR, REVENUE WORKS AND MINOR WORKS AT SUNJUWAN UNDER GE JAMMU

Amount

B/R Portion:- Taking down shutters of any description exc. 1 Sqm but n.exc. 2 Sqm each and removing from site complete all as specified and as directed.

Taking down chowkats or frames with shutters exc. 1.5 Sqm and n.exc 4 Sqm each (without taking off shutters from the frame) including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts and and removing from site complete all as specified and as directed.

All as per ser item No 2.00 above here in before but n exc 1.5 sqm each complete all as specified and as directed.

Taking down door and Refixing shutters after making necessary repair of any description exc.1 Sqm but n.exc. 2 Sqm each complete all as specified and as directed. Note:- Builder's hardware used in repairs shall be measured separately.

S & F 2nd class hard wood, plain, solid, straight, chowkats & frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specified and directed by Engr-in-Charge complete all as specified and as directed.

S&F 35mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part-I section 8, clause 8.24(a) complete all as specified and as directed.

S&F Factory made, 2nd class hard wood, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both sides, the size of rail and stile as per IS-1003(Part-I), kiln seasoned and chemically pressure treated 35mm thick complete all as specified and directed by Engr-in-Charge.

Factory made pressed steel frames of size 105x60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinge, lock strike plate etc. complete including bottom of each chowkat to be welded with 02 nos 25x25x3mm angle iron projecting 10cm one either side including one shop coat of red oxide chrome primer & including PCC 1:3:6 type C-0 in back filling of chowkats & tarring back of chowkats and holdfasts complete all as specified and as directed.

All as per Ser item No 8.00 above but frame size 125x60mm complete all as specified and as directed.

S & F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube complete all as specified and directed.

S&L Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails Mild steel frame shall be covered with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail. lock rail and bottom rail on either side and gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement suppling and fixing in the frame at site as per specification clause No 8B.1 to 8B.10 and drawing on page No 156 of MES SSR-2010 Part-II complete all as specified and as directed.

S&F Box type steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube factory made with double side shutters wire gauged shutter and glass glazed shutter (wire cloth and glass panes will be measured and paid separately) with side hung shutters with MS handles and MS peg stay dovetailed or welded including 02 No's MS Tower bolts 150mm long for each leaf and 08mm square bar grill/guard bars at spacing as shown on Drg welded MS flat iron frame work, including other fittings, hinges, MS handles, tarred hold fasts, PCC blocks for hold fasts etc complete all as specified and as directed.

S&F Box type steel ventilator comprised of tubular frame and shutters made out of 1.25 mm thick MS sheet tube factory made with fixed type wire gauged shutter (wire cloth and glass panes will be measured and paid seperately)with side hung shutters with MS handles and MS peg stay dovetailed or welded incl 02 Nos MS Tower bolts 150 mm long for each leaf and 08 mm square bar grill/guard bars at spacing as shown on Drg welded MS flat iron frame work ,including other fittings, hinges, MS handles, tarred hold fasts, PCC blocks for hold fasts etc complete all as specified and as directed.

Supply and fixing galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with rails/wooden beading/steel staple complete all as specified and directed.

M&L for framed work such as grills, grating, etc with ends of bars shouldered, cooler stand, railing and similar work; framed guard bars,conforming to Fe 410-0 or Fe-310 complete all as specified and as directed.

S & F Mild Steel powder coated colour decorative type drapery rod of 20mm dia approved pattern & design including decorative knobs (02 x No for each opening) & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs/grips complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square pane complete all as specified and as directed.

All as per ser item No 17.00 above here in before but figured, pin head type and glazing with oil putty or wooden beads, in squares each pane complete all as specified and as directed.

M & L MS 250mm long sliding bolt clips type stove enameled black and bright bolt not less than 12mm dia including 6 Nos of nut and bolts complete all as specified and as directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 125mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S & F 1st class hard wood small fitting such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary loubers, articles n.exc 200 Cu.cm each complete all as specified and as directed.

S&F 100mm long butt hinges, medium weight cold rolled mild steel (ISI Marked) all as specified and as directed.

S&F 140mm size (overall length of cover plate) floor door stopper of aluminum alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F Helical door spring 200mm including roller and roller plate complete fixed with welding to existing steel chowkhats all as specified and directed.

S&F 150mm long aluminium handle extruded alloy, fabricated 'D' type anodised complete all as specified and as directed.

M&L applying two coats of synthetic enamel paint on wooden surface over one coat of pink primer including prepartion of new surface over 10cm width or girth complete all as specified and as directed.

Preparation of old wooden or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coat of synthetic enamel paint complete all as specified and as directed.

Preparation of old painted steel surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in repairs prelaminated particle board, 18/19mm thick, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination incl fixing of TW beading on open edges of particle board complete all as specified and as directed.

S & F hasp and staple 100mm long, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Taking down cement plaster/wall tiles from concrete/stone surfaces including raking out joints, hacking for key, scrubbing down with water etc and its removal from site all as specified & directed.

M&L for rendering 15 mm thick in CM 1:6 finished even and smooth without using extra cement (internal plaster) complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:4, finished even and smooth without using extra cement (external plaster) with WPC complete all as specified and as directed. Note : All rendering shall be upto 3 floor roof of building and necessary scaffolding shall be included in the rate.

M&L for 10 mm thick plaster on ceiling in cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new surfaces of wall applying two coats of Oil bound distemper white or tinted including 1mm thick wall care putty all as specified and directed.

Complete removal of existing treatment of old decorated surfaces of wall and aapplying two coats of distemper oil emulsion white or tinted including 1mm thick wall care putty complete all as specified and directed.

M&L applying three coats of white wash on ceiling incl preparation of newly plastered surface complete all as specified and as directed.

Preparation/scrapping the existing surfaces of walls including cornices, making good holes with chalk whiting, filling cracks etc and applying one coat of white wash on old prepared surfaces of walls all as specified and directed.

M&L preparation of newly plaster surfaces of wall, soffits/facia etc and applying two coat of cement base paint complete all as specified and as directed.

Preparation of old decorated surfaces of walls, soffits/facia of chajja/roof slab etc and applying one coat of cement base paint complete all as specified and as directed by Engr-in-Charge.

Preparation of old decorated surfaces of walls, soffits/facia of chajja/roof slab etc and applying one coat of cement base paint complete all as specified and as directed by Engr-in-Charge.

M&L Applying one coat of white wash on ceiling including Preparation of old plastered surfaces complete all as specified and as directed.

M&L Applying one coat of white wash on ceiling including Preparation of old plastered surfaces complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and applying neat cement slurry @ 3 Kg/Sqm complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

S & F coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM (1:6) complete all as specified and as directed.

S & F coloured Glazed ceramic tiles in vertical surface 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement ot match over & including10mm thick rendering in cement mortar 1:3 complete all as specified and as directed.

M&L machine cut Kota stone 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rounding of open edge, rubbing and polishing complete (mirror face) as in floor, over 20 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M & L Granite (of any type) tiles 15 to 18mm thick machine cut, on cooking platform, staircase etc, bedded & jointed with grey cement slurry & pointed with white cement with admixure of pigment to match the shade of granite stone including cutting & polishing over 15mm thick screed in CM (1:4) complete all as specified and as directed.

Taking down 15 mm bore galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

All as per ser item No 53.00 above here in before but 20 mm bore complete all as specified and as directed.

S & F 15 mm bore medium grade galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid on floors complete all as specified and as directed.

All as per ser item No 55.00 above here in before but 20 mm bore complete all as specified and as directed.

All as per ser item No 55.00 above here in before but 25 mm bore complete all as specified and as directed.

Re-fixing old steel tubing and connections in new or old position of 15 mm bore of pipe (walls, ceiling or floor etc) complete all as specified and as directed.

All as per ser item No 58.00 above here in before but 20 mm bore of pipe complete all as specified and as directed.

S&F in repair 15mm bore stop valves, cast copper alloy (ISI marked) screwed down, high pressure with crutch or butterfly handle, screwed both ends (externally threaded) for iron pipe or for unions complete all as specified and as directed.

All as per ser item No 60.00 above here in before but 20 mm bore complete all as specified and as directed.

S&F in repair angle valves CP screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and directed.

S & F in repairs 15mm bore pillar cocks chromium plated brass with capstain head screwed down high pressure complete all as specified and directed.

S&F in repair bib taps, longbody, fancy type Chromium Plated, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs stop valve concealed type 15 mm cast copper alloy fancy type, chromium plated with long shank and cup, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair CP shower rose wih swivel joints brass chromium plated 125 mm size, including fixing to steel pipe or union all as specified and directed.

S & F in repairs CP brass towel rail fancy type 600mm long fixed with CP brass screw complete all as specified and as directed.

S&F in repairs ISI marked 500 Litre capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top three layer) hoisted and fixed in position all as specified in SSR Part I including PTMT Ball valves 20mm bore, high pressure with eposy coated aluminium rod & high density plastic ball etc complete all as specified and as directed.

S&F in repairs ISI marked 1000 Litre capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top three layer) hoisted and fixed in position all as specified in SSR Part I including PTMT Ball valves 20mm bore, high pressure with eposy coated aluminium rod & high density plastic ball etc complete all as specified and as directed.

S&F in repair Vitreous china squatting pan 'Orissa' pattern ' size 580x440mm white, with integral foot rest 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe,anti syphonage pipe, etc. complete making good to floor as existing complete all as specified and directed by Engr-in-Charge.

S&F vitreous China wash down water closet pan ( pedestal pattern Water Closet, (excluding flushing cistern and flush pipe) , including fixing bolts, connection to drain (or outgoing pipe) and to flushing pipe , etc., and fixing of seat cover complete fixed in repairs complete all as specified and as directed.

S&F in repair cover of CI oval acess door with bolts and rubber gasket to make it water tight for 100mm bore CI bends complete all as specified and directed by Engineer in charge.

S&F in repair cover of CI oval acess door with bolts and rubber gasket to make it water tight for 75mm bore CI bends complete all as specified and directed by Engineer in charge.

S&F in repairs Vitreous china wash hand basin white ,flat back of size 550x400mm with PVC connection (15x450)mm long with PTMT nuts and PVC washer and including cutting for pinning in ends,pair of cast iron brackets and provision of PVC waste pipe 32mm of adequate length , CP waste coupling 32 mm dia of half or full threaded, chromium plated fancy type angle valve 15 mm dia bore, and taking down unserviceable wash hand basin complete all as specified and directed by Engr-in-charge.

S & F vitreous china bowl urinal flat back, size of 465x355x265 mm white (minimum), with grating and union for discharge pipe, fixed in repairs including connections to flushing pipe and outgoing pipes complete all as specified and as directed.

S&F in repairs stainless steel sink with drainage board, made of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets,connecting union to pipe, overall size 915mmx460mm, bowl size (410x330x160mm) complete all as specified and as directed.

S&F in repair PVC low level flushing cistern, 10 litre capacity, symphonic action type, white inlet valve, float, handle, incl brackets, 15mm PVC connection 600mm long, 15mm cast copper alloy chromium plated angle valve and 32mm dia PVC flushing pipe including fixing of long screw chromium plated all as specified and directed by Engr-in-Charge.

S & F in repair Chromium plated Peg Set 175mm to 250mm fixing with wall all as specified and directed by Engr-in-Charge.

Dismantling of 75mm and100mm dia cast iron pipes, jointed in cement mortar or lead joints and taking out of trenches if required complete all as specified and as directed.

S&F 100mm bore sand cast iron pipe, waste and vent pipe in any length with or without ears, with cement joints in trenches or wall complete all as specified and as directed.

All as per ser item No 82 here in before but 75mm bore pipefixed to wall and laid in trenches complete all as specified and as directed.

M&L cast iron bends (any radius), diminishing pieces or tappers of pipe 100mm bore complete all as specified and as directed.

All as per ser item No 84.00 above here in before but 75mm bore pipe complete all as specified and as directed.

S&F in repair cast iron 100 mm dia bore pipe,branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

S&F in repair cast iron 75 mm dia bore pipe,branch pieces, double (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

S&F Stack Clamps out of (50mmx5mm) flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for pipe 100mm bore complete all as specified and as directed.

All as per ser item No 88.00 above here in before but for 75mm bore pipe complete all as specified and as directed.

M&L CI 100mm branch pieces, Tee, Single (equal or unequal) ordinary or inverted (spiqut or socket type) or with parallel branches complete all as specified and as directed.

All as per ser item No 90.00 above here in before but for 75mm bore complete all as specified and as directed.

S & F in repair 100mm cast iron bends with access door, with (ordinary or inverted) spigot with parallel branches with single (Y) laid in trenches or fixed to walls complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection, concrete shall be laid in alternate bays n.exc. 3m in length, finished fair and even complete all as specified and as directed.

M & L for Reinforced Cement Concrete type B-0, 1:2:4 (12.5mm graded aggregate) in foundation, including fafts, footing, foundation beams, plinth beams, bases for columns, manhole cover and necessary formwork square or rectangular etc basement slabs, under reamed piles and mass concrete complete all as specified and as directed.

M&L cast iron floor trap with steel grating including jointing to waste pipe fixed in cement concrete type B-I (1:2:4) dia of outlet in 100mm complete all as specified and as directed.

M&L for cast iron cowls for 75 mm bore of pipe complete all as specified and as directed.

M & L for PVC (SWR) floor trap 63mm dia for WHB, including 40mm dia HDPE pipe upto the trap of bath room and jointing with solvent with outlet pipes, stainless steel grating etc fixed in repairs complete all as specified and as directed.

S & F PVC (SWR) pipes,110 mm bore, single socketed,in any length, with rubber joints, fixed to walls complete including fixing clamps etc with nut & bolts including taking down of pipe complete all as specified and as directed.

S & F PVC (SWR) bend/shoe,110 mm bore, fixed to pipes complete including fixing clamps etc with nut & bolts complete all as specified and as directed.

S&F PVC SWR pipes 75 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps all as specified and directed.

S&F PVC SWR bends of 75 mm bore complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings (below or above ground level) and removing from site complete all as specified and as directed.

M & L cement concrete type C-1, 1:3:6 (20mm graded aggregate) as in padding/levelling concrete on top of roof slab and chajjas and other similar works complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and as directed.

S & F in repairs soap shelf, PVC white/colour appx size 450x125x40mm as per sample complete all as specified and as directed.

S & F in repairs stainless steel plate rack 1.25mm thick of size 900x775x250mm including angle iron brackets and taking down of 19mm thick particle board shelf & removal from site complete all as specified and directed.

M & L Cement concrete 1:5:10 (40 mm size coarse agg) as in mass filling in sunken floor of toilets complete all as specified and as directed.

M&L Rendering 15mm thick in cement sand mortar 1:4 mixed with liquid integral water proofing compound 0.20 Ltr per 50 kg bag of cement both on floor and wall .After proper curing and drying apply Epoxy Resins coating polymer modified cemantation coating like Brush Bond of Fosroc Pedilite and Bostic as per manufacturer's instructions both on floor as well as on walls of sunken floors complete all as specified and as directed by Engr-in-charge.

Removing existing treatment (APP, tar felt or any type) from roof surfaces,cleaning the surface of all foreign material such as fungus,moss,dust etc.by wire brushing and dusting,and removing unserviceable material out side cantt area complete all as specified and as directed.

Rendering 20 mm thick in CM 1:4 on concrete surfaces (on roof slab) finished even and smooth without using extra cement, mixing liquid water proofing compound complete all as specified and as directed. Note- liquid water proofing compound shall be measured and paid seperately.

Demolition of cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and removing unserviceable material outside cantt area complete all as specified and as directed.

Applying bitumen primer @ 0.30 lit/sqm, providing and laying 3mm thick APP modified water proofing membrane weighing not less than 3.5 kg/sqm reinforced with non woven polyster mat weighing not less than 160 gm/sqm, having softening point not less than 800 N /Sq cm, tearing strength of 180N, with minimum of 10 cm side laps and 15cm end laps, laying by application of torch, and applying two coat of aluminium paint, complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and as directed.

M&L brushing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified and directed.

Excavation over areas n. exc 1.5 m deep and getting out in soft/loose soil complete all as specified and as directed.

M&L providing cement concrete in foundation and filling and mass concrete, type D-2 1:4:8 (40 mm graded aggregate) complete all as specified and as directed.

M & L providing Reinforced cement concrete as in foundation M-20(20 mm graded aggregates) complete all as specified and as directed.

M & L providing Reinforced cement concrete as wall M-20 (20 mm graded aggregates) complete all as specified and as directed.

M & L for RCC 1:1.5:3 type A-1 using 20 mm graded stone aggregate as in beams, cantilevers, lintels over 1.5m span complete all as specified and as directed.

M & L for RCC type A-1, 1:1.5:3 using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, manhole cover and in shelves and the like complete all as specified and directed.

S & F mild steel work as in grills & cover of sump, gratings, etc, with end os bars shouldered and /or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters; walk ways; railings; framework of watertanks and similar work conforming to Fe.290. Gde-E-165 complete all as specified and as directed.

S & F mild steel TMT bars 10 mm dia and over as in reinforcement, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

All as per Item No 122.00 above but 5mm dia and over upto and incl 10 mm dia as in Binders,stirrups,spacer complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams , sides and soffits(if any) of foundation and plinth beams; and similar work ; vertical or to batter complete all as specified and as directed.

Formwork to faces of walls, retaining walls, anutments, parapets and staircase railings and similar work including attached pillasters, buttresses etc ; vertical or to a batter complete all as specified and as directed.

Use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n. exc. 200 mm thick, rough finished surface of concrete complete all as specified and as directed.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of rough finished surfaces complete all as specified and as directed.

M & L 40 mm graded coarse aggregate complete all as specified and as directed.

M & L charcoal for filter loose filling complete all as specified and as directed.

S&f PVC pipes 150 mm dia including all fittings (like bend, color, Tee, reducer end cap etc) including sprinkler nozole, necessary excavation etc complete all as specified and as directed.

Removing excavated soil to a distance not exc 50 m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and as directed.

Returning, filling in , including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.

M&L brick work with sub class 'B' bricks, straight or curved exc. 6m mean radious built in CM 1:6 complete all as specified and as directed.

M&L half brick thick brick work with sub class "B" bricks straigth or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and as directed.

S&F stainless steel gratings of outer frame dia 150 mm openable type incl all necessary fittings such as hinges including embeding in tiles with white cement complete all as specified and as directed.

S&F Roof trusses (framed), trussed purlines made out of MS angle iron including distences pieces,cleats etc confirming to Fe-410-W(Gde-E-250) quality B all as specified and directed.

S & F Pre-painted galvantume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and as directed.

S & F Pre-painted galvantume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F wire netting of galvanized steel wire 1.40mm nominal dia fixed with tinned tacks of wire staples, average size of mesh 25mm and fixed complete all as specified and as directed.

S&F MS plain black sheet 1mm thick as in steel gate including welding cutting holes etc fixed in repairs complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L granite 15 t0 18 mm thick (Pure black) (table rubbed and polished)as in steps,jambs,pillars,window cills cooking plateforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over & including 15mm thick screed in CM 1:4 edges of slab to be rounded from all sides.(including cutting and polishing) complete all as specified and as directed.

Cutting of openings in brick walls/RCC beams, demolition of floor, taking out existing floor trap/Nahani trap/ 'P' or 'S' trap/ bends, taking out lead joints, replacing the existing CI pipe 4" /3" dia of shorter length with minimum 45 cm long CI pipe of 4"/3'' dia (As per site requirement) again providing lead joints falling inside floor/wall loosening the complete stack out side the bldg, thereby bringing the complete stack away from the wall ranging between 12 to 15cms , providing new stacks/clamps of 50x3mm(MS) and of required size all as specified, and directed by Engr-in -charge (incl all necessary scaffolding, lifting arrangement upto the height of four storeyed bldg.

Surface excavation n. exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.

Cutting chases for concealed water tubing or concealed conduit & making good in CM 1.3 of girth exc 10 cm and n.exe. 20 cm in brick wall complete all as specified and as directed.

Septic tank for 10 users, Single Chamber (Brick construction) with top of slab at ground level including necessary excavation and earth work in any type of soil and disposal of surplus soil to a distance not exceeding 50 metres, vent pipe, supplying and fixing manhole covers with angle iron welded frame complete all as specified and shown in Drg No CEPZ/C-TD//013/13 sheet No 1/5 to 5/5 dated 11 Sep 2013 complete all as specified and as directed by Engr in Charge.

Soakage well 2.4 metre dia and 3.00 metre deep below inlet pipe level (depth from inlet pipe to ground level 45 cm) including excavation and earth work in any type of soil filled with brick bats, RCC slab with RCC manhole cover fixed in angle iron frame, SWG single junction inlet, filling around slab in slopes and disposal of surplus soil to a distance exceeding n. exc. 50m complete all as specified and shown in Drg No CEPZ/C-TD//013/13 sheet No 1/5 to 5/5 dated 11 Sep 2013 complete all as specified and as directed by Engr in Charge.

Soakage well 1.2 metre dia and 1.5 metre deep below inlet pipe level (depth from inlet pipe to ground level 45 cm) including excavation and earth work in any type of soil filled with brick bats, RCC slab with RCC manhole cover fixed in angle iron frame, SWG single junction inlet, filling around slab in slopes and disposal of surplus soil to a distance exceeding n. exc. 50m complete all as specified and shown in Drg No CEPZ/C-TD//013/13 sheet No 1/5 to 5/5 dated 11 Sep 2013 complete all as specified and as directed by Engr in Charge.

Cement Concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) concrete bed to drain pipes 150 mm dia including packing under and haunching against the sides of pipes after they are laid and tested in complete all as specified and as directed.

M&L Salt glazed stoneware drain pipes of bore 150 mm dia grade 'A' laid in trenches in concrete bedding and jointed complete in CM 1:1 all as specified and directed.

M & L fixing granite stone of colour ruby red/ black granite 15-20 mm thick on wall with cement screed of 1:3 including the existing plaster & prepare the surface as required for fixing stone and also providing hilti self screw bolt 5mm dia including anchor ms rowlplug of required size all as specified by manufacture at a distance n exc 1'' c/c to c/c of both ways complete all as specified and as directed.

Fixing granite stone of colour ruby red/ black granite 15-20 mm thick on wall by providing hilti self screw bolt 5mm dia including anchor ms rowlplug of required size all as specified by manufacture at a distance n exc 1'' c/c to c/c of both ways complete all as specified and as directed. NOTE : - Rates for all Scaffolding and other T & P shall be included in the above item no 152 and 153.

Reinforced cement concrete 1:2:4 as in band , Walls,retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and as directed.

S&F stainless steel kitchen plate rack of size 720 mmx 600mm x 230mm made out of 1mm thick stainless steel sheet all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B-0 using (12.50 mm graded stone aggregates )as in floor finished even and rough without using extra cement, mixing liquid water proofing compound complete all as specified and as directed. Note- Liquid water proofing compound shall be measured and paid seperately.

M/L Moorum/Red Bajri/approved earth Filling in floors or pavings, laid in layers n. exc 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L broken stone hard core of gauge n. exc 63mm deposited, spread and levelled in layers n. exc 15cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed.

M&L PCC, 1:4:8 type D-2 (40 mm graded agg) 100 mm thick in sub base complete complete all as specified and as directed.

E/M Portion:- Taking down old unsv copper/aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches,sockets, ceiling roses,bell push,bell electric,lamp holder,bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron,round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

Taking down old and unserviceable submain wiring any size of two core & incldung earth wire complete including batten/ conduit and make good the disturbed surface to match the existing surface, complete all as specified and as directed by Engr-in-charge.

Taking down old and unserviceable, distribution board any type including MCBs etc after removing all connection and make good the disturbed surface complete all as specified and as directed by Engr-in-charge.

M&L for point wiring controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductor multistrand FRLS, PVC insulated (unsheathed) drawn into existing concealed PVC rigid/steel conduit 1.8mm wall thickness ISI marked terminated into existing CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and as directed. Note : (a) Wiring shall be done by using proper colour coding. (b) Earth wire shall be of green colour (c) On RCC roof/celing PVC conduit shall be provided on surface with proper fixing clips all as directed by Engr-in-Charge.

One light point/fan point/bell point controlled by one switch complete all as specified and as directed.

One 5 Amps 3/5 pin socket outlet on the same board with other switch complete all as specified and directed by Engr-in-charge.

One 5 Amps 3/5 pin socket outlet on the independent board with other switch complete all as specified and directed by Engr-in-charge.

All as per item No 163.00 above here-in-before but wiring with 2.5 sqmm copper cable with 1.5 sqmm copper cable as continuous earth wire for 5/6 pin 16 Amps socket out let on independent board with other switch complete all as specified and directed by Engr-in-charge.

M&L for point wiring for one light/fan/5 Amps independent socket point/call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductor multistrand FRLS, PVC insulated (unsheathed) drawn into an including new concealed PVC rigid/steel conduit 1.8mm wall thickness ISI marked terminated into CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and as directed. Notes : (a)The rates coded includes cutting the wall /ceiling (35cm x 45 cm) and filling with cement mortor 1:3 after fitting the PVC conduit as mentioned above complete with colour matching etc. (b) Earth wire shall be of green colour. (c) On RCC roof/celing PVC conduit shall be provided on surface with proper fixing clips all as directed by Engr-in-Charge.

One light point/fan point/bell point controlled by one switch complete all as specified and as directed.

One 5 Amps 3/5 pin socket outlet on the independent board with other switch complete all as specified and directed by Engr-in-charge.

All as per item No 165.00 above here-in-before but wiring with 2.5 sqmm copper cable with 1.5 sqmm copper cable as continuous earth wire for 5/6 pin 16 Amps socket out let on independent board with other switch complete all as specified and directed by Engr-in-charge.

Supply & fixing only switch piano flush button type 05 Amp single pole, one way complete all as specified and directed.

Supply & Fixing only switch piano flush button type 15 Amps SP one way complete all as specified and directed.

S&F only socket outlet multi purpose 3 pin 2 pin 05 Amp flush type complete all as specified and directed.

S&F only socket outlet multi purpose 6 pin and 3 pin, 15 Amp flush type complete all as specified and directed.

S&F ceiling rose surface bakelite 2 to 3 terminals PVC/Poly carbonate/Isolated body 65 x 50 mm size complete all as specified and directed.

S&F only fan regulator resistance type and making all necessary connection to the regulator complete all as specified and directed.

Supply & fixing only bell push flush type 5 Amps completer all as specified and directed.

Supply and fixing bell AC 230V single pole complete all as specified and as directed.

M& L in replacement for Lamp holder , insulated body , with back plate suitable for batten fittings complete all as specified and as directed.

M& L in replacement Self ballast LED retrofit Lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and as directed.

S&F in replacement new generation energy saving , wall mounted LED Tube light batten fittings, extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver 20 Watt LED 6500K (4' ft long ) with LED rod 20 watt, 230 Volts 50 Hz complete all as specified and as directed.

S&F LED Bulk head fitting of cap 10 watt Aluminium PDC housing, toughened glass cover with IP 65 protection complete wth LED Bulb all as specified and directed by Engr-in-charge.

S&F DB Sheet metal enclosures double door, factory made, made out of CRCA mild steel sheet 1.2 mm thick with matellic painting, FP-42 protection surface mounting 240 volts, 200 Amp rated enameled neutral bus bar 8 way dust and vermin proof suitable for incorporation of Isolator / MCBs. duly concealed in wall and making good the distrubed surface and colour matching complete all as specified and as directed.

S&F DB Sheet metal enclosures double door, factory made, made out of CRCA mild steel sheet 1.2 mm thick with matellic painting, FP-42 protection surface mounting 240 volts, 200 Amp rated enameled neutral bus bar 4 way dust and vermin proof suitable for incorporation of Isolator / MCB's duly concealed in wall and making good the distrubed surface and colour matching complete all as specified and as directed.

S&F MCB single pole 240 volts, 06 to 40 Amps,"B" series 10 KA complete all as specified and as directed.

S&F MCB single pole neutral 240 volts, 40Amps, ,"B" series 10 KA complete all as specified and as directed.

Re- filling the wall from where the DB board is replaced after fitting the DBs in wall with sub - class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar with ratio 1:6 complete all as specified and directed by Engr - in - Charge.

M&L in replacement for Sub main wiring with proper colour coding , insulated , unsheathed , multistranded ,copper conductor FRLS, cable of 2 run 6 Sqrmm for phase and neutral and one run of 4.0 Sqrmm for earth wire unsheathed , miltistranded , copper conductor FRLS, drawn through in new rigid PVC concealed conduit fixed on wall complete all as specified and as directed. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length . Note : Wiring shall be done in proper colour coding.

Supply and fixing MCB SPN 63 amps 415 volt complete all as specified and as directed.

S&F Meter board for housing electrical meter with transprent lid tempered proof with suitable locking arrangements including removing existing electric meter and refixing to wall all as required complete all as specified and as directed.

Taking down ceiling fans/Exhaust fan, sealing cable end, dismantling blades and removing fan and blade to store of safe place of contractor for refixing after repair and painting of Bldg complete all as specified and as directed.

Hanging only ceiling fan/Exhaust fan connecting up including provision of cable from ceiling rose or connector to fan and rubber reel etc complete all as specified and directed by Engr-in-Charge.

Rewinding of Exhaust fan, of any make/type and size with super enamelled copper wire of appropriate gauge as existing to obtain the specified and satisfactory RPM as per menufactures specification, including replacement of all insulation materials, varnishing, heating, drying, assembling of stater/rotor, connection & testing complete all as specified and as directed.

Supply and fixing ball bearing of any size and type, suitable for any type/make/size of Exhaust fan complete all as specified and as directed.

Supply, fixing in replacement of capacitor 230 Volt AC 50 Hz, conforming to IS-1709 and Rated capacity 4.0 MFD for Exhaust Fan complete all as specified and as directed.

Supply and fixing in replacement of louver shutter made of MS sheet metal 1.2 mm thick for round base and 0.8 mm thick for flaps, comprising of mounting legs frames made o MS flat strips of size 25mm x 3mm includidng heavy duty rust proof passivated bolts of size 50 mm long 8 mm dia to be fixed on wall complete with using fastener bolt,driling, and duly painted by two coat of synthatic enamelled paint (spray painting) over a coat of primer for exhust fan up to 400 mm sweep including taking down old one complete all as specified and as directed.

Excavating in trenches n.exc 1.5 mtrs wide and n.exc 1.5 mtr in depth for foundation of poles, taking out/laying of cables, poles etc and getting out in soft/loose soil complete all as specified and directed by Engr-in-charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft/loose soil complete all as specified and as directed.

Removing excavated materials n.exc 50 mtrs and depositing where directed at a level n.exc 1.5 mtr above the starting point in soil, complete all as specified and as directed.

Supply and Laying well burnt bricks, sub class 'B' bricks, laid breath wise in trenches for protection of UG cable complete all as specified and directed.

M&L for sand cushioning for protection of cable (below, above and around the cable laid in trenches) complete all as specified and directed.

S&F GI tube light grade 40 mm bore laid in trenches/road/drain/wall alongwith all fittings complete with MS clamp and nut bolts and washers etc, including taking down old GI tubing alongwith all fixing accessories complete all as specified and directed.

Supply and laying cable in replacement LT underground Cable XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade cross-sectional area 35 Sq mm, 3.5 core laid in trenches/ on wall/ on pole/ in air/ through pipe/ duct etc complete all as specified and directed by Engr-in-Charge. Notes: (i) Wherever cable fixing/connection, suitable thimble should be used as per site situation. (ii) Excavation and earth work, sand cushioning, brick work and GI pipe shall be measured and paid separately.

S&F in replacement distribution board double door (suitable for incomer MCCBs and out going MCB) TP & N vertical load line 6 Way complete with 200 Amps bus bar, 415 Volt sheet metal enclouser suitable for G frame MCCB complete all as specified and as directed.

S&F in replacement Isolator 4 Pole, TPN 415 volts, 100 Amps rating with rupturring cap 16 KA, complete all as specified and as directed.

S&F in replacement MCCB 4 pole, 415 Volt fixed thermal and fixed maganatic setting of cap 125 Amps 16KA complete all as specified and as directed.

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.3 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC (1:3:6) type C-2 using 40 mm graded stone aggregate complete all as specified and as directed.

The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to sxposed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) and testing on completion.

ASHISH CONSTRUCTION COMPANY

CELMAC REGD

Bidder Name

CELMAC REGD

M/S TRIKUTA BUILDERS

ASHISH CONSTRUCTION COMPANY