Spl repair to OR MD Accn at Saraswati Vihar at Old Cantt Prayagraj including provn of split AC of MH and provn of Geyser for Officer Qtr at Naria, Def Enclave Varanasi Under GE (East) Prayagraj.

Amount

Demolition of brick work or stone/boulders masonry built in cement mortar including all quoins arches pillar etc but excluding Ashlar facing, droved stone work and forecast concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks(old size), straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

All as per item 02 above but Except brick. Note : Bricks obtained from item No. 01 above shall be used

Dismantling brick tiles any size laid bedded and pointed in any mortar over roof complete all as specified and directed.

Demolition of existing WPT from roofs, any thickness, including plastering, old water proofing membrane and , concrete padding, copping, leaping, brick/brick tiles etc complete (whether full thickness removed or only a part thereof) and removing the demolished material at a distance n.exc.50 m where directed complete all as specified & as directed

M&L for PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) as in roof padding in levelling course, benching etc, finished even & rough to receive cement mortar screed bed complete all as specified and directed.

M&L for screed bed 10 mm thick in cement mortar 1:3 over roof slab mixed with water proofing compound as per manufacturer’s instructions finished even & fair complete all as specified and directed. NOTE : WPC will be measured and paid separately as supply only.

Supply only integral water proofing compound complete all as specified & directed.

M&L for Water Proofing Treatment to the roof/ sunken floor surfaces, comprising of the following:- (a) Cleaning surface by wire brushes, brooming to remove dust, etc as required. (a) Applying one coat of bitumen primer confirming to IS-3384-1965 @ 0.50 kg per sq.m. (b) Applying a tack coat of hot blown bitumen 85/25 @ 1.2 kg/sq.m confirming to IS – 702-1998 before lying waterproofing membrane. (c) Laying 3mm thick APP water proofing membrane( weight not less than 3 kg / sq.m ) over entire area with overlaps and sealed all as specified and directed. (d) Again apply a tack coat of hot blown bitumen 85/25 @ 1.2 kg / sq.m over water proofing membrane. (e) Dusting dry sand @ 0.75 kg per sq.m

M&L for Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors/roofs, cut and polished over and including 20mm screed bedding in cement mortar (1:4) complete all as specified and directed

Demolition of cement concrete in any description and in any position not specifically provided for, complete all as specified and directed. complete all as specified and directed

M&L for PCC 1:5:10 type E-2 (using 40mm graded crushed stone agg) as in mass concrete in sunken floor complete all as specified & directed.

Dismantling old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical surface, dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L for Coloured Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 10mm thick plaster in cement mortar (1:4) complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 mm to 8 mm thick (square/rectangular), area of each tile exc 0.06 sqm but n'exc 0.11Sqm, joint free in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Dismantling stone slabs of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L for Baroda green Marble flooring work 18 to 20 mm thick laid over and including 20mm screed bedding in cement mortar (1:4) (table rubbed and polished) incl steps, stairs, jambs, pillars, window cills, cooking platforms and like, jointing and pointing in white cement (1:2) using marble dust with admixture/pigment to match complete all as specified and directed.

M&L for Baroda green marble slab 18- 20mm thick (in full length one piece) as in riser of steps, stairs, skirting, dado and pillar etc laid over and incl 10mm thick plaster in cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 20 mm thick Granite slab work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 20 mm thick cement mortar (1:4), pointing in white cement and marble dust (1:2) with admixture of pigment to match with shade of granite including making hole for gas pipe in pre-cast slab as well as stone slab in cooking platform complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations including grinding and polishing complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness incl chequered tiling (below or above ground level) complete all as specified and directed.

M&L for 1st quality non skid coloured ceramic Heavy duty outdoor/parking (ENDURA type) tiles, area of each tiles n'exc 0.11 Sqm,10 mm thick set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub floors, sub base, floors and pavings etc complete all as specified and directed.

M&L for Chequered cement concrete tiles, 300mm x 300mm x 25mm thick coloured with table rubbed rubber moulded set, jointed and pointed in neat cement slurry over and incl 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in plinth protection, finishing surface even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster on brick or stone walls or ceiling etc including racking out joints, hacking for key, scrubbing down with water etc. Complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick wall in CM (1:4), mixing with water proofing liquid as per manufacturer instruction (but excluding the cost of water proofing liquid ), finished surface even and fair complete all as specified and directed.

Supply only Liquid water proofing compound of approved make complete all as specified and directed.

M&L for rendering 10mm thick in CM (1:6) on Brick/ Conc surface of wall, finished even and fair complete all as specified and directed.

M&L for 5 mm thick rendering in cement mortar 1:4 on ceiling surfaces , finishing the surface fair and even complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coat of cement base paint on wall surface over a coat of primer complete all as specified and directed.

M&L for preparation of old plastered surface of wall after complete removal of existing treatment and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coat of oil bound distemper on walls over a coat of primer and 1 mm thick wall care putty complete all as specified and directed.

M&L for preparation of old plastered surface after complete removal of existing treatment, applying two coat of oil bound distemper on walls over a coat of primer and 1 mm thick wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks, etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified and directed.

S&F 110mm PVC (SWR) bends with access door complete all as specified and directed.

S&F 75mm PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed.

S&F in repair 75mm PVC floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair Stack clamps made out of 50mm x 5mm flat iron & 16mm round iron stays/clamp including bolts & nuts and securing ends of stays/clamp suitable for 100mm bore pipe complete all as specified and directed.

All as per item No.49 above but suitable for 75mm bore pipe.

M&L for Cutting chases pinning in , making good to facing where reqd. and pointing in CM 1:3 to ends or edges of landing , steps, cills, sunshades, selves lintels etc. and cutting chases for concealed for water tubing or concealed conduit wiring etc and making good, cutting n.exc 10cm girth complete all as specified & as directed

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 15mm bore pipe complete all as specified and directed.

S&F GI tube 15mm bore medium grade with all fittings fixed to walls and ceilings or laid in floor complete all as specified and directed.

Refixing old steel tubing 15 mm dia and connections in new or old position (Walls, ceiling, floors, etc.) including new fittings, as required complete all as specified and directed. Note : Tubing obtained from item No. 53 above shall be used

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 20mm bore pipe complete all as specified and directed.

M&L 20mm bore GI tubing medium grade with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and directed.

Refixing old steel tubing 20 mm dia and connections in new or old position (Walls, ceiling, floors, etc.) including new fittings, as required complete all as specified and directed. Note : Tubing obtained from item No. 55 above shall be used

S&F in repair 15 mm size bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed.

S&F in repair 15 mm size angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed.

S&F in repair Looking mirror of specified thickness, decorative type moulding beading edge all-round, mounted fitted pvc plug with CP screws, complete all as specified and directed

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest complete including provn of plain cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) bedding, connection to trap, outgoing flushing pipe, anti sypohonage pipe,100 mm bore 'P' or 'S' of pipe etc complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair Sinks with drainage board made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair vitreous china wash hand basin with pedestal, white flat back size 550 x 400 mm excluding taps waste chain and plug but including bracket, waste coupling of 32 mm size complete all as specified and directed.

Supply only pillar tap cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed. Note : Cost of fixing deemed to be included in quoted rates for item No. 64 above.

S&F in repair Brass chromium plated shower rose 125 mm size and fixed complete all as specified and directed.

S&F in repair 15 mm bore stop valve fancy type chromium plated with long cup and shank (Concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F in repair 500 litters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F in repair 20 mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed

S&F in repair 15 mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed

S&F in repair 32mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fittings, fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets fixed to wall complete all as specified and directed.

S&F in repair SS soap dish of pattern/ sample capt in Engineer-in-charge office complete all as specified and directed

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area n'exc 1.5 Sqm each complete all as specified and directed

Taking down shutters only of any description n'exc 1 sqm each including removing from site to store or otherwise as directed complete all as specified and directed

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area exc 1.5 Sqm but n'exc 4.00 Sqm each complete all as specified and directed

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube but single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet, supplying & fixing in opening as per specification & drawing complete all as specified and directed

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2 mm plain colour PVC sheet on back face, with Particle board core, supplying & fixing in the frame at site as per specification & sketch shown in section 8 of SSR part II complete all as specified and directed

S&F 125x60mm pressed steel frames for doors with one or more rebates made out of 1.25mm thick MS sheet including necessary fixing lugs, hinges lock strike plate etc complete all as specified and directed

S&F 105x60mm pressed steel frames for doors with one or more rebates made out of 1.25mm thick MS sheet including necessary fixing lugs, hinges lock strike plate etc complete all as specified and directed

M&L for preparation of new factory pre-primed steel surface and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for PCC (1:2:4) type B-1, (using 20mm graded stone aggregate as) in bed block, filling in door frames and the likes complete all as specified and directed.

S&F 32 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

S&F for 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S&F 150mm stainless steel handles fabricated type complete all as specified and directed

S&F 200mm stainless steel handles barrel tower bolts of fabricated type and fixed complete all as specified and directed

S&F 250mm stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed

S&F 100 mm long stainless steel hinges, complete all as specified and directed

M&L for MS Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

M&L for Anodised aluminium frame for doors, windows, ventilators powder coated (Thickness or powder coating not less than 50 micron ) with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

M&L for Anodised aluminium window and ventilator shutters, powder coated (Thickness or powder coating not less than 50 micron ) side hung type without sash bars, using aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 no.) suitable handle (1 No.), tower bolt 100mm long (1 No) complete all as specified and directed

M&L for 4.8 mm thick sheet glass ordinary quality and glazing with beading n'exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for 4.8 mm thick frosted sheet glass ordinary quality and glazing with beading n'exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 140mm Floor door stopper of stainless steel body and tongue, with hard drawn steel spring complete all as specified and directed.

S&F 300mm, Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

S&F Rolled MS Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde- E-250) quality A complete all as specified and directed

M&L for Cutting holes into or through brick walls built in cement mortar superficial area n'exc 150 sq cm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

S&F in repair 25 mm dia stainless steel curtain rod of 304 grade for door & windows incl one pair of SS Bracket and steel end cover for each rod cut to size and fixed in position complete all as specified and directed.

Dismantling boarding any description fixed in any position with nails or any other means complete all as specified and directed

S & F in repair 18 to 19 mm thick Block board, grade-2 quality, interior grade, commercial types in cup board shutter/ shelves and fixed with screw and teak wood beading all around / exposed surfaces complete all as specified and directed

S & F 150 mm aluminium anodised hasp and staple complete all as specified and directed

S&F 75 mm dia oval shape aluminium handle fancy type brass polished bright finish complete all as specified and directed

S&F magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud all as per approved sample complete all as specified and directed.

S&F 20mm thick prelaminated (PVC) ply of colour fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete all as specified and directed

S&F continuous (piano) hinges, mild steel bright finish of width 30 mm complete all as specified and directed.

Demolition of cement concrete reinforced as in chajja, manhole cover and similar suspended work complete all as specified and directed

M&L for Precast Cement Concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in manhole covers and similar work complete all as specified and directed

M&L for mild steel TMT bars 10 mm dia and over in reinforcement cut to length bent to shape required incl cranking bending, spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia all as specified and as directed.

S&F in repair PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets, 32 mm bore PVC flush pipe 600mm long complete all as specified and directed.

S & F 15 mm dia fancy type chromium plated with long shank and angle valve cast copper alloy screwed down type high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed.

Taking down main switches, distribution boards and cut outs etc. of any type and capacity along with the existing boards and removing the same from site and making good the disturbed surface/portion of walls complete all as specified and directed

Taking down carefully sub main wiring of any nos of wire and size with earth wire on wooden batten/surface conduit/casing capping complete with its all accessories complete all as specified and directed.

M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/fan/exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.6 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 3.0 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.

All as per above item No. 120 but for one 5 pin 5 Amp socket outlet point on an independent board with cable of sizes 2.50 sqmm.

All as per above item No. 120 but for one 5 pin 5 Amp socket outlet point on the same board with switches with cable of sizes 2.50 sqmm .

All as per above item No. 120 but for one bell/buzzer point controlled by one bell push single pole one way

All as per above item No. 120 but for one light point controlled by two two-way switches.

All as per above item No. 120 but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm.

S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.

S&F Switch piano, flush type, single pole, two way 5/6 Amp 230 Volts complete all as specified and directed.

S&F Socket outlet, 2 in 1, 5 pin 5/6 Amp, 230 volts, flush type complete all as specified and directed.

S&F Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and directed.

S&F Socket outlet, 2 in 1, 6 pin 15/16 Amp, 230 volts, flush type complete all as specified and directed.

S&F Lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.

S&F bell push piano, flush type, single pole, one way 5/6 Amp 230 volts complete all as specified and directed.

S&F electric bell ding dong type AC 230 Volts, 50 Hz single pole complete all as specified and directed.

S&F ceiling fan regulator, electronic, rotary step type suitable for 1200/1400 mm sweep ceiling fan complete all as specified and directed.

S&F in repair sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way 240Volts with 200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F MCB Single Pole and neutral, 6 to 32 Amps 240 volts, 10KA breaking capacity, convenient to 'C' Curve complete all as specified and directed.

S&F MCB Single Pole, 6 to 32 Amps 240 volts, 10KA breaking capacity, convenient to 'B' Curve complete all as specified and directed.

S&F in repair 1 x 10W LED Mirror light fitting, LED 6000K, Decorative Indirect up-down light for mirror and as wall light application with extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed.

S&F in repair 1 x 10W LED Bulk head light fitting, LED 600 lumen, enclosed in polycarbonate body, weather proof, LED light fitting fixture with co extruded polycarbonate body, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed.

S&F in repair 1 x 18W LED wall mounted tube light fitting, LED 6000K, Decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed.

S&F in repair Decorative LED wall light fixture 9/10watt, B-22 base polycarbonate body, weather proof, LED light fitting fixture with co extruded polycarbonate body, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed.

S&F in repair 36 Watt road lighting/bldg security light luminaire with unique peanut optics to ensure uniform distribution, higher spacing between poles and maintenance free system for city roads and Streets, 50% Energy Savings, IP66 Protection PC and FG Cover, High Impact Resistance complete including LED Lamps and all accessories including bracket made out of 25mm bore GI pipe (light grade), 1.20 m long made to shape and fixed to existing pole or bldg by means of 2 Nos mild steel flat iron 40x6mm clamps with suitable size bolt, nuts & washers and connecting with three core flexible copper wire of size 23/0.0076 from ceiling rose to existing junction box complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick directly buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below the ground level connected to GI earth wire 4mm dia by means of bolts nuts check nuts and washers of galvanised iron at 2 points & GI pipe 15 mm bore light grade for protection of earthing wire PCC chamber 1:3:6 (type C-1) using 20mm graded stone aggregate, watering pipe 20mm bore light grade, funnel with wire mesh, 50 mm thick cover of RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8 mm MS bars at 150 mm centre to centre both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR part-I and including excavation & earth work & connecting the earthing point/equipment and testing complete all as specified & directed. Note- The cost of GI wire and protection pipe up to test point shall be included in above quoted rates.

S&F sub main wiring with two single core FRLS PVC insulated unsheathed multistranded copper conductor of size 4sqmm nominal cross sectional area and one run of 4sqmm nominal cross sectional area FRLS PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 20mm dia 'medium grade' PVC concealed conduits and fittings, including taking down existing sub main wiring complete all as specified and directed. NOTE: One unit length shall measured as two run of main wire and one run of conduit & earth wire

Taking down existing ceiling fan / exhaust fan, any sweep, by disconnecting carefully all electric connection and refixing the same after necessary repair work as required (such as cleaning all the serviceable parts thoroughly, reassembling the fan after testing for proper functioning), with and including provision of electrical wire 3-core 23/0.0076 copper conductor, spray painting with synthetic enamel paint of tint same as that of existing, and wiriting MES No. on fan, complete all as specified and directed. NOTE : The quoted rate shall deemed to be inclusive of every minor items i.e., nut, bolts, screws, lugs etc., which are fairly required for the smooth functioning of fans.

Taking down carefully existing geyser by disconnecting all electrical connection and refixing the same making electric connection with and including wire 3 core 23/0.0076 copper conductor and 600mm PVC connections complete all as specified and directed.

S&F in repair two pin and earth plug and socket with 1 MCB single pole 20 to 32amps C series 10KA in sheet metal enclosure and connecting complete all as specified and directed.

Supply, laying, testing XLPE cable Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3½ core , in repair complete all as specified and directed.

S&F in repair exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers all as specified and directed by Engr-in-Charge.

Excavation in trenches/Pits in any type of soil(soft/loose/hard/ dense soil), n.exc. 1.5M wide and n.exc. 1.5M deep and getting out complete, all as specified & directed .

Returning filling in with the earth obtained from Item No 37 here-in-before including spreading, levelling and well ramming in layers n.exc. 25cm thick complete all as specified & directed.

Removal of surplus excavated material to a distance n.exc. 50 Mtr and depositing where directed at a level n.exc. 1.5 Mtr above starting point complete all as specified & directed

M&L for providing old size sub class 'B' bricks laid perpendicular to the cable abutting each other complete all as specified and directed.

Supply and spreading clean and dry sand (unwashed) in trenches around the cable for cushioning complete all as specified and directed.

S&F electric water heater, storage type steel body geyser with copper inner tank and heating element up to 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, 600mm PVC connection pipe, etc. complete all as specified and directed.

Supply and installed hi wall split units indoor/outdoor complete with cordless remote control unit and with in built cooling ,air ioniser and plasma filter for better indoor air quality of capacity 1.5 TR, Digital Inverter twin rotary variable speed compressor, single phase units 220V - 240V, 50 Hz, electric driven, minimum 5 star rated, complete all as specified and directed. Note:- (i) Copper pipe of dia 1/2'' & 1/4'' with insulation and drain pipe as per requirement shall be deemed to be included in unit quoted rate. (ii) Copper pipe of dia 1/2'' & 1/4'' with insulation and drain pipe will be concealed/casing capping as specified and directed by Engr-in-charge. (iii) Wall drill as per requirement to install AC indoor/outdoor unit and making good to walls disturbed surface & applying finishes to match existing surface complete all as specified and directed shall be deemed to be included in unit quoted rate.

Supply and fix Voltage stabilizer for automatic operation, SP naturally are cooled in door type designed for input variation 170 V to 250 V output stablized at 230 V with accuracy of +- 2.5% and capacity 4-5 KVA

S&F PVC AC modular surface box with combination 2 in 1, 5 pin 5 Amp and 15 Amps with and including heavy duty socket and 1xMCB SP 16 Amp all as specified and directed.

M/S A P CONSTRUCTION

Shivam Constructions

M/s SKP CONSTRUCTION