Revamped Reforms-based and Results-linked, Distribution Sector Scheme infrastructure work under Loss Reduction in Kesco, Kanpur

Supply of 1.1_KV XLPE insulated PVC sheathed armoured Aluminum Cable in high loss area

2Cx6 sqmm

2Cx10 sqmm

4Cx16 sqmm

4Cx25 Sqmm

Supply of 9.5 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 37 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as per IS 2629 (1985)

Supply of 11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as per IS 2629 (1985)

Supply of New Galvanised Stay Set with anchor plate (200x200x6mm), 50x8mm stay clamp, Stay guy insulator, nut bolts, 2 Nos turn buckles, 1.8 m long, 16 mm diameter solid GS Stay rod & 7/3.15 mm Dia GI stranded wire etc as required as per technical specification, approved drawings and scope of work.

Supply of Spike Earthing 2540mm long made of 20mm GI solid Rod.

Supply of 8 SWG G.I. Earthing Coil 115 tones (1.85 Kg)

Supply of 6 SWG GI wire

Supply of 8 SWG GI wire

Supply of AERIAL BUNCHED XLPE CABLE 3x95+1x70+1x16 sqmm

Supply of AERIAL BUNCHED XLPE CABLE 3x120+1x70+1x16 sqmm

Supply of AERIAL BUNCHED XLPE CABLE 3x150+1x120+1x16 sqmm

Supply of LT Pole Clamps with nut & bolts for Laying ABC

Supply of Dead End clamps with Eye-Hook (Insulated)

Supply of Suspension clamps with Eye-Hook (Insulated)

Supply of LT insulation Piercing Connectors of 25-150 sqmm size for energizing distribution Kiosk/box

Supply of LT insulation Piercing Connectors of 25-120sqmm size for energizing distribution Kiosk/box

Supply of LT insulation Piercing Connectors of 25-95sqmm size for energizing distribution Kiosk/box

Supply of L.T. Neutral Bare Connector.

Supply of 1X25 mm2 XLPE/PVC insulated AL. cable for energising the distribution boxes/Kiosk

Supply of Single Phase CRCA MS Deep Drawn Distribution Box with clamps with and all accessories.

Supply of Three Phase CRCA MS Deep Drawn Distribution Box with clamps with lug and all accessories.

Supply of Single Phase SMC Distribution Box with clamps with lug and all accessories.

Supply of Three Phase SMC Distribution Box with clamps with lug and all accessories.

Supply of Pre-fabricated steel items like V cross arm, top clamp, DC cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, transformer mounting structure etc made of MS Channels (100x50x6mm), MS angle (65x65x6mm), MS flats (65x8mm) of given size duly galvanised for over head structures as per technical specification, approved drawings and scope of work.

Supply of MS Nuts, Bolts with Washers duly galvanised as per technical specification, approved drawings and scope of work (off size).

Supply of 11 KV polymer/porcelain Disc insulator 70 KN along with suitable hardware fittings

Supply of 11 KV Polymer /porcelain Pin Insulators 10 KN with GI PIN

Supply of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - ACSR Dog Conductor

Supply of CI Packing (Galvanised) as per site requirement.

Supply of Danger Plate

Supply of G.I. Barbed Wire

Supply of 12 kV, 1600 A, 350MVA, 25kA for 3 seconds, 3-ph, indoor type Vacuum Circuit breaker along with 12 kV, 1-Phase, 400-200/5-5 3 Nos indoor type Current Transformer, indoor mounting type control panel for feeder protection, control cabling between VCB and indoor control panel (SCADA Compatible & 61850 protocol compliant protection relays) and required accessories, bi-metallic clamps, A-meter, volt-meter, 3-phase electronic energy meter, Relay & accessories complete for feeder breaker protection along with adapter panel/complete mechanism to connect with existing busbar as per technical specifications, approved drawings and scope of works (Outgoing Panel)

Supply of G.I. Pipe 6" dia. with Clamps etc.

Supply of 11KV XLPE 3 phase power cable armored,aluminium conductor,standard as per technical specification,approved drawing and scope of works 3Cx185 sqmm

Supply of Heat Shrinkable Jointing Kit Outdoor /indoor for 11 KV 3x185 sq. mm XLPE Cable

Supply of Heat Shrinkable Jointing Kit Outdoor for 11 KV 3x185 sq. mm XLPE Cable

Supply of Heat Shrinkable Jointing Kit indoor for 11 KV 3x185 sq. mm XLPE Cable

Supply of 11KV Straight through Joint 3x185 sqmm XLPE Cable

Supply of L.T Aluminum armored XLPE single core cable size

1X630 Sq mm.

1X400 Sq mm.

Supply of Al Crimping lugs (630/400/) Sq mm. for all cables of Distribution Transformers (Any rating)

Supply of 1100 Grade. PVC sheathed steel strip armored, aluminum conductor LT XLPE insulated cable size

3.5 CX240 Sq mm. XLPE

3.5 CX120 Sq mm. XLPE

3.5 CX70 Sq mm. XLPE

Supply of Cable end termination using total double compersation Brass glands and crimping type aluminum thimbles size for L.T. cables.

3.5 CX240 Sq mm. XLPE

3.5 CX120 Sq mm. XLPE

3.5 CX70 Sq mm. XLPE

Supply of HDPE pipe 110 mm dia to be laid by horizontal drilling for under ground piping (trenchless) at road cross of above cable.

Supply of GI Pipe for external area of small cable to houses

50mm dia

40 mm dia

Supply of PVC pipe heavy gauge 40 mm dia (under ground area) pipe for small cable to houses

Supply of G.I. Strip of size 25x3 sqmm for making connection between Type-B/C Panel and earth rod

Supply of Type LT Distribution Box with a rupturing capacity of 50 KA at 415 volt Called for Individual items (CPRI approved manufacturer) Openable in front & back suitable for 3 Phase, four wire, 50 Hz AC Supply & an ambient temperature of 45 deg. C. The Cubical should be weather proof, Dust proof, Bremen proof and in closer protection shall be IP-65 as per IS 2147- 1962 and IS-8623 the panels & switches boards shall be fabricated out of 2 mm CRCA Sheet Steel & Provided with 2 mm Hinged door Including suitable Foundation, MAIN LT PANEL AT SUBSTATION- 1000 & 630 KVA (Type A-1) Incomer - 1 No. 1250 Amp. TP MDO ACB with inbuilt MPR Released with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM) with control MCBs) (Outgoing - 4 sets of 400 amp. TP MCCB with spreader & Extended handle) (2 sets of 250amp. TP MCCB with spreader & Extended handle) (2 sets of 100 0amp. TP MCCB with spreader & Extended handle)

Supply of Outdoor Type LT Distribution Box with a rupturing capacity of 50 KA at 415 volt Called for Individual items (CPRI approved manufacturer) Openable in front & back suitable for 3 Phase, four wire, 50 Hz AC Supply & an ambient temperature of 45 deg. C. The Cubicle should be weather proof, Dust proof, Bremen proof and in closer protection shall be IP-65 as per IS 2147- 1962 and IS-8623 the panels & switches boards shall be fabricated out of 2 mm CRCA Sheet Steel & Provided with 2 mm Hinged door Including suitable Foundation, MAIN LT PANEL AT SUBSTATION- 400 KVA (Type A-2) (Incomer - 1 set of 800 amp. ACB with inbuilt MPR Released with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM) with control MCBs) (Outgoing - 6 sets of 250 amp. TP MCCB with spreader & Extended handle (5No.+1No. Capacitor panel)) (2 sets of 100 amp. TP MCCB with spreader & Extended handle)

Supply of Outdoor Type LT Distribution Box with a rupturing capacity of 50 KA at 415 volt Called for Individual items (CPRI approved manufacturer) Openable in front & back suitable for 3 Phase, four wire, 50 Hz AC Supply & an ambient temperature of 45 deg. C. The Cubical should be weather proof, Dust proof, Bremen proof and in closer protection shall be IP-65 as per IS 2147- 1962 and IS-8623 the panels & switches boards shall be fabricated out of 2 mm CRCA Sheet Steel & Provided with 2 mmHinged door Including suitable Foundation, MAIN LT PANEL AT SUBSTATION- 250 KVA (Type A-3) (Incomer - 1 set of 630 amp. ACB with inbuilt MPR Released with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM) with control MCBs)) (Outgoing - 5 sets of 250 amp. TP MCCB with spreader & Extended handle (4No.+1No. Capacitor panel)) (2 sets of 100 amp. TP MCCB with spreader & Extended handle)

Supply of Outdoor Type LT Distribution Box with a rupturing capacity of 50 KA at 415 volt Called for Individual items (CPRI approved manufacturer) Openable in front & back suitable for 3 Phase, four wire, 50 Hz AC Supply & an ambient temperature of 45 deg. C. The Cubical should be weather proof, Dust proof, Bremen proof and in closer protection shall be IP-65 as per IS 2147- 1962 and IS-8623 the panels & switches boards shall be fabricated out of 2 mm CRCA Sheet Steel & Provided with 2 mm Hinged door Including suitable Foundation, MAIN LT PANEL AT SUBSTATION- 160 KVA (Type A-4) (Incomer - 1 set of 400 amp. ACB with inbuilt MPR Released with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM) with control MCBs) (Outgoing - 4 sets of 250 amp. TP MCCB with spreader & Extended handle (3No.+1No. Capacitor panel)) (2 sets of 100 amp. TP MCCB with spreader & Extended handle)

Supply of Outdoor type feeder pillar panel to be made of 2mm. CRCA sheet & covers will be 2 mm CRCA sheet duly powder coated paint including suitable foundation with 400 amp. Aluminum Bus bar (Type B-1) with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM) having : 1 no Incomer 250amp. TP MCCB and 6 No.out-going 100 amp. TP MCCB with spreader & Extended handle.

Supply of Outdoor type feeder pillar panel to be made of 2mm. CRCA sheet & covers will be 2 mm CRCA sheet duly powder coated paint including suitable foundation with 300 amp. Aluminum Bus bar (Type B-2) with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM) having : 1 no Incomer 250amp. TP MCCB and 5 No.out-going 100 amp. TP MCCB spreader & Extended handle.

Supply of Outdoor type feeder pillar panel to be made of 2mm. CRCA sheet & covers will be 2 mm CRCA sheet duly powder coated paint including suitable foundation with 300 amp. Aluminum Bus bar (Type B-3) with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM) having : 1 no Incomer 250 amp. TP MCCB and 4 No.out-going 100 amp. TP MCCB spreader & Extended handle.

Supply of lockable distribution box along with bar lock of size 450x450 mm including suitable foundation with bus bar amp. 140 TPN to feed up to 10 houses (Type C). Panel to be made of 2mm. CRCA sheet

Supply of GI pipe of 40 mm dia under ground (For street light)

Supply of Junction Box (for street light connecton)

Supply of CRCA MS deep drawn junction box on STP/PCC pole with 1500 mm long GI pipe 40 mm dia with clamp (for street light connection)

Supply of SMC junction box STP/PCC pole with 1500 mm long GI pipe 40 mm dia with clamp (for street light connection)

Supply of GI Pipe 40mm dia B-Class 40 feet long for earthing of Type A and B panels

Supply of G.I . Pipe Chemical Earthing (electrode 3 mtr long 80 mm inner dia along with Chemical powder)

Supply of G.I.Strip of Size 50X6mm for connecting the Panels A& B type Panels.

Supply of M.S Flat of Size 25X3mm for connecting the Panels C- type Panels.

Supply of Steel Structure of size 65x65x6 mm (M.S. Angle )

Supply of Single phase polycarbonate meter box

Supply of Three Phase polycarbonate meter box

Supply of 11 KV CAPACITOR BANK INCLUDING MOUNTING STEEL GALVANISED STRUCTURE AND ACCESSORIES AS REQUIRED AS PER DETAILED TECHNICAL SPECIFICATIONS, DRAWING AND SCOPE OF WORKS IN FOLLOWING ARRANGEMENTS:

12.6 5 KV, 3960 KVAR, Three phase, 50 C/S Outdoor Type Capacitor Bank. Bank shall be completed with all associated equipment like 11 KV VCB switch gear with complete arrangement for connecting to existing bus bar alongwith adaptor panel, Capacitor Unit, Aluminium Busbar, Pin and Post Insulator, Expulsion Fuse, 11 KV Three Phase oil cooled RVT, 12 KV Three Phase Outdoor Type Metal enclosed vacuum capacitor switch, 11 KV 400 Amp. off load Isolator with earth switch with mounting structure, 9 KV, 10 KA Station class lightening arresstor, Indoor type control unit, Hotdip glavanised structure for complete system, Control Cable, Lug, Thimbal, Junction Box, Deep bore 40 ft. pipe earthing for structure and LA.

Supply of 11 kV XPLE insulated Dog conductor (with all accessories required for erection)

ERECTION PART

Armoured Consumer Cabling in High Loss Areas

Erection/Laying of 1.1_KV XLPE insulated PVC sheathed armoured Aluminum Cable from exisitng LT line/pole to Consumer meter including proper lugging.

2Cx6 sqmm

2Cx10 sqmm

4Cx16 sqmm

4Cx25 Sqmm

Replacement of Bare conductors/ Damaged A.B. Cable with AB cables

Excavation of additional pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and specifications:

9.5 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 37 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as per IS 2629 (1985)

Excavation of additional pole pit (of depth 1/6th of pole length) in soft rock/ mettalic road/ RCC / khranja as per scope of work, approved drawings and specifications:

9.5 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 37 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as per IS 2629 (1985)

Erection of following types of poles for LT overhead line by providing and installing danger plate anti climbing devices (barbed wire), earthing material (coil and 8 SWG G.I. wire) red oxide & aluminium paint, pole numbering including cement concrete foundation or refilling by bolders using cement concreting foundation 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) volume 0.5 cub mtr. or/and 200 mm average size bolders mixed with excavated earth etc. along with 250 mm dia x 12 Inch size muffing using cement concrete of 1:2:4 (1 Part cement, 2 Part coarse sand and 4 Parts 20 mm aggregate stone chip) as per scope of work, approved drawings and specifications:

9.5 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 37 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as per IS 2629 (1985)

Excavation of stay pit in following type of soils, as per scope of work, approved drawings and specifications:

Normal soil

Soft rock soil/soft rock/ mettalic road/ RCC / kharanja

Erection of galvanized Stay Set with 50x8 mm stay clamp, stay guy insulator, nut bolts, 2 Nos turn buckle's , 1.8 m long, 16 mm diamater solid GS Stay rod and 7/3.15 mm dia GI stranded wire etc as required by providing 0.2 cum cement concrete as per approved drawing, techhnical specification and scope of work.

Removal of existing LT bare conductor line and fixtures, deposting to stores of employer and erection, testing and commissioning of new Aerial Bunched XLPE Cable, tension clamps for dead end, suspension clamps, clamps for neutral, piercing connectors type-I & type-II 16 mm dia MS nuts and bolts, pole clamps, spring loaded bus bar suitable for single phased and three phase systems etc. as required as per technicla specification, approved drawing and scope of work.

Erection of AERIAL BUNCHED XLPE CABLE 3x95+1x70+1x16 sqmm with all assecessiories.

Erection of AERIAL BUNCHED XLPE CABLE 3x120+1x70+1x16 sqmm with all assecessiories.

Erection of AERIAL BUNCHED XLPE CABLE 3x150+1x120+1x16 sqmm with all assecessiories.

Erection of Single Phase CRCA MS Deep Drawn Distribution Box with clamps with lug and all accessories.

Erection of Three Phase CRCA MS Deep Drawn Distribution Box with clamps with lug and all accessories.

Erection of Single Phase SMC Distribution Box with clamps with lug and all accessories.

Erection of Three Phase SMC Distribution Box with clamps with lug and all accessories.

Erection, testing & commissioning of earthing by inserting GI Earthing spike 2540 mm long made of 20mm solid Rod as per approved drawings, scope of work and technical specifications

Excavation, erection, testing & commissioning of 8 SWG G.I. Earthing Coil 115 tones (1.85 Kg)

Erection of 6 SWG GI wire for earthing by providing GI nut, bolts & washers, turn buckle etc as per approved drawings, scope of work and technical specifications

Shifting of Existing consumer connection from existing bare conductor line/damaged A.B. cable line to newly erected AB Cable line

Single Phase Connection

Three Phase Connection

Strengthening of existing damaged pole by providing and welding 1.2mtr long 3 No MS angle 65*65*6mm and carrying out required grouting and pole plinth activities as per approved drawing and technical specification.

11 KV Feeder Bifurcation by constructing 11 KV Over Head Line

Survey, route alignment & pole spotting, preparation of survey report and uploading in the web portal after approval of Project Manager

Excavation of pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and specifications:

11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as per IS 2629 (1985)

9.5 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 37 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as per IS 2629 (1985)

Excavation of pole pit (of depth 1/6th of pole length) in soft rock/ metallic road/ RCC / kharanja as per scope of work, approved drawings and specifications:

11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as per IS 2629 (1985)

9.5 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 37 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as per IS 2629 (1985)

Erection of following types of poles for 11 KV overhead line by providing and installing danger plate, anti-climbing devices (barbed wire), earthing material (coil and 8SWG GI wire), red oxide & aluminium paint, pole numbering including cement concrete foundation or refilling by bolders using cement concreting foundation 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) volume 0.5 cub mtr. or/and 200 mm average size bolders mixed with excavated earth etc. along with 250 mm dia x 12 Inch size muffing using cement concrete of 1:2:4 (1 Part cement, 2 Part coarse sand and 4 Parts 20 mm aggregate stone chip) as per scope of work, approved drawings and specifications:

11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as per IS 2629 (1985).

9.5 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 37 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as per IS 2629 (1985).

Erection, testing & commissioning of pre-fabricated galvanized steel items like V cross arm, top clamp, DC cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, etc made of GS Channels, GS angle, GS flats of given sizes for over head structures and GS nuts, bolts & washers including painting by red oxide & aluminium paint as per technical specification, approved drawings and scope of work.

Earthing arrangement as per technical specificatons, approved drawings and scope of work.

Excavation, erection, testing & commissioning of Spike Earthing of 2540 mm long with 20mm solid Rod

Excavation, erection, testing & commissioning of 8 SWG G.I. Earthing Coil 115 tones (1.85 Kg)

Erection of 8 SWG GI wire for earthing and guarding by providing GI nut, bolts & washers, turn buckle etc

Erection of 6 SWG GI wire for earthing and guarding by providing GI nut, bolts & washers, turn buckle etc

Excavation of stay pit in following type of soils, as per scope of work, approved drawings and specifications:

Normal soil

Soft soil/soft rock/ metallic road/ RCC / khranja

Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (2 Nos.) and 0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) as per technical specifications, approved drawings and scope of works.

Erection, testing and commissioning of 11 kV insulator including their hardware fittings as per technical specification, approved drawings and scope of work.

11 kV Pin insulator with GI pin

11 kV Disc insulator 70KN with strain hardware

Laying out, tensioning, binding of conductor and tightening of stays and stringing, testing and commissioning of ACSR Conductor of following sizes including jointing sleeves, helical formed fittings, jumpering and by providing & erecting PG Clamps etc as required as per approved drawings, scope of work and technical specifications

6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - ACSR Dog Conductor

Erection of 12 kV, 1600 A, 350MVA, 25kA for 3 seconds, 3-ph, indoor type Vacuum Circuit breaker along with 12 kV, 1-Phase, 400-200/5-5 3 Nos indoor type Current Transformer, indoor mounting type control panel for feeder protection, control cabling between VCB and indoor control panel (SCADA Compatible & 61850 protocol compliant protection relays) and required accessories, bi-metallic clamps, A-meter, volt-meter, 3-phase electronic energy meter, Relay & accessories complete for feeder breaker protection along with adapter panel/complete mechanism to connect with existing busbar as per technical specifications, approved drawings and scope of works .

11 KV Feeder Bifurcation by laying Under Ground Cable

Survey, route alignment & pole spotting and detection of existing electrical/telephonic cable/and other utilites of public utilites departments with the help of utilitiy dectector and preparation of survey report and uploading in the web portal after approval of Project Manager.

Excavation of additional pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and specifications:

11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as per IS 2629 (1985)

Excavation of additional pole pit (of depth 1/6th of pole length) in soft rock/soft rock/ mettalic road/ RCC / khranja as per scope of work, approved drawings and specifications:

11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as per IS 2629 (1985)

Erection of following types of poles for 11 KV overhead line by providing and installing danger plate, anti-climbing devices (barbed wire), earthing material (coil and 8SWG GI wire), red oxide & aluminium paint, pole numbering including cement concrete foundation or refilling by bolders using cement concreting foundation 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) volume 0.5 cub mtr. or/and 200 mm average size bolders mixed with excavated earth etc. along with 250 mm dia x 12 Inch size muffing using cement concrete of 1:2:4 (1 Part cement, 2 Part coarse sand and 4 Parts 20 mm aggregate stone chip) as per scope of work, approved drawings and specifications:

11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as per IS 2629 (1985).

Excavation of stay pit in following type of soils, as per scope of work, approved drawings and specifications:

Normal soil

Soft rock soil/soft rock/ mettalic road/ RCC / khranja

Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (2 Nos.) and 0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) as per technical specifications, approved drawings and scope of works.

Erection, testing and commissioning of 11 kV insulator including their hardware fittings as per technical specification, approved drawings and scope of work.

11 kV Pin insulator with GI pin

11 kV Disc insulator 70KN with strain hardware

Erection, testing & commissioning of pre-fabricated galvanized steel items like V cross arm, top clamp, DC cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, etc made of GS Channels, GS angle, GS flats of given sizes for over head structures and GS nuts, bolts & washers including painting by red oxide & aluminium paint as per technical specification, approved drawings and scope of work.

Earthing arrangement as per technical specificatons, approved drawings and scope of work.

Excavation, erection, testing & commissioning of Spike Earthing of 2540 mm long with 20mm solid Rod

Excavation, erection, testing & commissioning of 8 SWG G.I. Earthing Coil 115 tones (1.85 Kg)

Erection of 8 SWG GI wire for earthing and guarding by providing GI nut, bolts & washers, turn buckle etc

Laying of 11kV cable through HDD method (including cable length mounted upto pole top minus cable length laid inside G.I. Pipe) including digging of pit

Digging of Trench .6 mtr wide .9 mtr to 1.5 mtr deep for laying of Pipe and Cable

NORMAL SOIL

SOFT ROCK /kharanja

HARD ROCK/metallic road/RCC

Laying of GI Pipe 6" dia in above digged trench and also for raising Cable on double Pole/Structure Laying of 11 KV Cable 3x185 sqmm

Laying of 11 kv Cable through above Pipe

Laying of Cable in above digged trench and also mounting Upto line by using bricks/ sand &stone pad as per REC norms

Making and Mounting of heat shrinkable jointing kit outdoor/ indoor for 11 KV 3x185 sqmm XLPE Cable

Digging suitable Pit and making straight through and joint 11 KV 3x185 sqmm

Making of Straight Through joint and Construction of RB Pit 3x1x1 mtr. with 9 inch thick side wall and 6 inch thick RCC bed along with RCC Trench Cover in Three Parts duly plastered and finsihed for housing St. through joint. box and filled with sand.

Road restoration Charges against the permission from concerning department like nagar nigam, pwd, NHAI etc

NORMAL SOIL

SOFT ROCK /khranja

HARD ROCK/metallic road/RCC

Erection of 12 kV, 1600 A, 350MVA, 25kA for 3 seconds, 3-ph, indoor type Vacuum Circuit breaker along with 12 kV, 1-Phase, 400-200/5-5 3 Nos indoor type Current Transformer, indoor mounting type control panel for feeder protection, control cabling between VCB and indoor control panel (SCADA Compatible & 61850 protocol compliant protection relays) and required accessories, bi-metallic clamps, A-meter, volt-meter, 3-phase electronic energy meter, Relay & accessories complete for feeder breaker protection along with adapter panel/complete mechanism to connect with existing busbar as per technical specifications, approved drawings and scope of works .

Conversion of Exisiting LT Bare Conductor Line into LT Under Ground Network.

Erection of L.T Aluminum armored XLPE single core cable

Installation of L.T Aluminum armored XLPE single core cable size 1X630 Sq mm.

Installation of L.T Aluminum armored XLPE single core cable size 1X400 Sq mm.

Al Crimping lugs (630/400/240/120/70) Sq mm.

Erection of Cable end termination using total double compersation Brass glands and crimping type aluminum thimbles size

3.5 CX240 Sq mm. XLPE

3.5 CX120 Sq mm. XLPE

3.5 CX70 Sq mm. XLPE

Laying, testing and commissioning of 1100 volts grade, PVC sheathed steel strip armored aluminum conductor LT XLPE Insulated Cable of sizes 3.5 CX70/3.5 CX120/3.5 CX240 Sq mm. to be laid under ground in HDPE Pipes

Digging of trench by Making pits after due survey with the help of utility detector of existing electrical/telephonic cable/and other utilites of public utilites department and laying of cables of size 3.5 CX70/3.5 CX120/3.5 CX240 Sq mm. XLPE by manual drill (by making moles)

Digging of trench by Making pits after due survey with the help of utility detector of existing electrical/telephonic cable/and other utilites of public utilites department and laying of cables of size 3.5 CX70/3.5 CX120/3.5 CX240 Sq mm. XLPE through HDD method with the help of HDD Machine

Digging of trench by open trench method after due survey with the help of utility dectector of existing /telephonic cable and other utilites of public utilites department and laying of cables of size 3.5 CX70/3.5 CX120/3.5 CX240 Sq mm. XLPE

Back filling and restoring the road to make as original including supply of all material and RoW permission required from the land owner authority(nagar nigam, PWD, NHAI etc) for all L.T. cables, pipe and service cables concerned with a single D.T.

Laying of HDPE pipe of various sizes by horizontal drilling for under ground piping (trenchless) for above cable at road crossing min. depth of pipe shall be 1.5 mtr. Below surface 110 mm. dia.

Laying of GI Pipe of 50mm dia (External area)

Laying of GI Pipe of 40mm dia (External area)

Laying of PVC pipe heavy gauge 40 mm dia (under ground area)

Erection of G.I. Strip/M.S. Strip of size 25x3/50x6 sqmm connecting Type A/B/C pannel with spike rod/ chemical earthing/deep bore earthing arrangement including required bolting/welding

Dismantling of Existing LT overhead line including STP poles, bare conductor/A.B. Cable, pole accessories and transportation of Dismantled materials to KESCO Store.

Laying of Aluminum armored XLPEs cables size 2X6 Sq mm. upto consumer meter

Laying of Aluminum armored XLPEs cables size 2X10 Sq mm. upto consumer meter

Laying of Aluminum armored XLPEs cables size 4X16 Sq mm. upto consumer meter

Laying of Aluminum armored XLPEs cables size 4X25Sq mm. upto consumer meter

Installation, Testing & Commissioning of Outdoor Type LT Distribution Box with a rupturing capacity of 50 KA at 415 volt Called for Individual items (CPRI approved manufacturer) Openable in front & back suitable for 3 Phase, four wire, 50 Hz AC Supply & an ambient temperature of 45 deg. C. The Cubical should be weather proof, Dust proof, Bremen proof and in closer protection shall be IP-65 as per IS 2147- 1962 and IS-8623 the panels & switches boards shall be fabricated out of 2 mm CRCA Sheet Steel & Provided with 2 mm Hinged door Including suitable Foundation, MAIN LT PANEL AT SUBSTATION- 1000 & 630 KVA (Type A-1) Incomer - 1 No. 1250 Amp. ACB with inbuilt MPR Released with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM) with control MCBs) (Outgoing - 4 sets of 400 amp. TP MCCB with spreader & Extended handle) (2 sets of 250amp. TP MCCB with spreader & Extended handle) (2 sets of 100 0amp. TP MCCB with spreader & Extended handle)

Installation, Testing & Commissioning of Outdoor Type LT Distribution Box with a rupturing capacity of 50 KA at 415 volt Called for Individual items (CPRI approved manufacturer) Openable in front & back suitable for 3 Phase, four wire, 50 Hz AC Supply & an ambient temperature of 45 deg. C. The Cubicle should be weather proof, Dust proof, Bremen proof and in closer protection shall be IP-65 as per IS 2147- 1962 and IS-8623 the panels & switches boards shall be fabricated out of 2mm CRCA Sheet Steel & Provided with 2 mm Hinged door Including suitable Foundation, MAIN LT PANEL AT SUBSTATION- 400 KVA (Type A-2) (Incomer - 1 set of 800 amp. ACB with inbuilt MPR Released with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM) with control MCBs) (Outgoing - 6 sets of 250 amp. TP MCCB with spreader & Extended handle (5No.+1No. Capacitor panel)) (2 sets of 100 amp. TP MCCB with spreader & Extended handle)

Installation, Testing & Commissioning of Outdoor Type LT Distribution Box with a rupturing capacity of 50 KA at 415 volt Called for Individual items (CPRI approved manufacturer) Openable in front & back suitable for 3 Phase, four wire, 50 Hz AC Supply & an ambient temperature of 45 deg. C. The Cubical should be weather proof, Dust proof, Bremen proof and in closer protection shall be IP-65 as per IS 2147- 1962 and IS-8623 the panels & switches boards shall be fabricated out of 2mm Sheet Steel & Provided with 2mm Hinged door Including suitable Foundation, MAIN LT PANEL AT SUBSTATION- 250 KVA (Type A-3) (Incomer - 1 set of 630 amp. ACB with inbuilt MPR Released with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM) with control MCBs)) (Outgoing - 5 sets of 250 amp. TP MCCB with spreader & Extended handle (4No.+1No. Capacitor panel)) (2 sets of 100 amp. TP MCCB with spreader & Extended handle)

Installation, Testing & Commissioning of Outdoor Type LT Distribution Box with a rupturing capacity of 50 KA at 415 volt Called for Individual items (CPRI approved manufacturer) Openable in front & back suitable for 3 Phase, four wire, 50 Hz AC Supply & an ambient temperature of 45 deg. C. The Cubical should be weather proof, Dust proof, Bremen proof and in closer protection shall be IP-65 as per IS 2147- 1962 and IS-8623 the panels & switches boards shall be fabricated out of 2 mm CRCA Sheet Steel & Provided with 2 mm Hinged door Including suitable Foundation, MAIN LT PANEL AT SUBSTATION- 160 KVA (Type A-4) (Incomer - 1 set of 400 amp. ACB with inbuilt MPR Released with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM) with control MCBs) (Outgoing - 4 sets of 250 amp. TP MCCB with spreader & Extended handle (3No.+1No. Capacitor panel)) (2 sets of 100 amp. TP MCCB with spreader & Extended handle)

Installation, Testing & Commissioning of Outdoor type feeder pillar panel to be made of 2mm. CRCA sheet & covers will be 2 mm CRCA sheet duly powder coated paint including suitable foundation with 400 amp. Aluminum Bus bar (Type B-1) with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM) having : 1 no Incomer 250amp. TP MCCB and 6 No.out-going 100 amp. TP MCCB with spreader & Extended handle.

Installation, Testing & Commissioning of Outdoor type feeder pillar panel to be made of 2mm. CRCA sheet & covers will be 2 mm CRCA sheet duly powder coated paint including suitable foundation with 300 amp. Aluminum Bus bar (Type B-2) with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM) having : 1 no Incomer 250amp. TP MCCB and 5 No.out-going 100 amp. TP MCCB spreader & Extended handle.

Installation, Testing & Commissioning of Outdoor type feeder pillar panel to be made of 2mm. CRCA sheet & covers will be 2 mm CRCA sheet duly powder coated paint including suitable foundation with 300 amp. Aluminum Bus bar (Type B-3) with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM) having : 1 no Incomer 250 amp. TP MCCB and 4 No.out-going 100 amp. TP MCCB spreader & Extended handle.

Installation, Testing & commissioning of lockable distribution box along with bar lock of size 450x450 mm including suitable foundation with bus bar 140 amp. TPN to feed up to 10 houses (Type C).Panel to be made of 2mm. CRCA sheet

Installation of 2x10 sq mm. XLPE cable (for street light)

Installation and laying of GI pipe of 40 mm dia under ground (For street light)

Installation of junction box on STP/PCC pole with 1500 mm long GI pipe 40 mm dia with clamp (for street light connection)

Boring upto 39 feet and erection of GI Pipe 40mm dia B-Class 40 feet long for connection with Type-A and B panel along with supply of G.I. Strip of size 50x6 sqmm

Erection/Pegging of M.S.EARTH spike ROD 2540X20 MM

Erection of G.I. Pipe chemical earthing electrode 3 mtr long 80 mm inner dia along with Chemical powder

Preparation and submission of 2 sets of detailed printed drawing/auto cad drawing / PDF (along with digital copy) of L.T. network of each D.T. depicting location of L.T. cables and all panels(Type-A,B and C) and separate list for all connections on Type C panels in excel format

Erection of Single phase poly carbonate meter box after removal of existing meter box and connections of meters with armoured cable laid along with resealing of meter with seals provided by Kesco

Erection of Three phase poly carbonate meter box after removal of existing meter box and connections of meters with armoured cable laid along with resealing of meter with seals provided by Kesco

Reconductoring of 11 kV OH line.

Excavation of additional pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and specifications:

11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as per IS 2629 (1985)

Excavation of additional pole pit (of depth 1/6th of pole length) in soft rock/soft rock/ mettalic road/ RCC / khranja as per scope of work, approved drawings and specifications:

11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as per IS 2629 (1985)

Erection of following types of poles for 11 KV overhead line by providing and installing danger plate, anti-climbing devices (barbed wire), earthing material (coil and 8SWG GI wire), red oxide & aluminium paint, pole numbering including cement concrete foundation or refilling by bolders using cement concreting foundation 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) volume 0.5 cub mtr. or/and 200 mm average size bolders mixed with excavated earth etc. along with 250 mm dia x 12 Inch size muffing using cement concrete of 1:2:4 (1 Part cement, 2 Part coarse sand and 4 Parts 20 mm aggregate stone chip) as per scope of work, approved drawings and specifications:

11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as per IS 2629 (1985) .

Excavation of stay pit in following type of soils, as per scope of work, approved drawings and specifications:

Normal soil

Soft rock soil/soft rock/ mettalic road/ RCC / khranja

Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (2 Nos.) and 0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) as per technical specifications, approved drawings and scope of works.

Erection, testing and commissioning of 11 kV insulator including their hardware fittings as per technical specification, approved drawings and scope of work.

11 kV Pin insulator with GI pin

11 kV 70KN Disc insulator with strain hardware

Dismantling of existing overhead line conductor & fittings and depositing to Employer store, Laying out, tensioning, binding of new conductor and tightening of stays and stringing, testing and commissioning of ACSR Conductor of following sizes including jointing sleeves, helical formed fittings, jumpering and by providing & erecting PG Clamps etc as required as per approved drawings, scope of work and technical specifications

6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - ACSR Dog Conductor by replacing existing racoon/rabbit condcutor

Erection, testing & commissioning of pre-fabricated steel items like V cross arm, top clamp, DC cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, etc made of MS Channels, MS angle, MS flats of given sizes for over head structures and MS nuts, bolts & washers all galvanized including painting by red oxide & aluminium paint as per technical specification, approved drawings and scope of work.

Earthing arrangement as per technical specificatons, approved drawings and scope of work.

Excavation, erection, testing & commissioning of Spike Earthing of 2540 mm long with 20mm solid Rod

Excavation, erection, testing & commissioning of 8 SWG G.I. Earthing Coil 115 tones (1.85 Kg)

Erection of 8 SWG GI wire for earthing and guarding by providing GI nut, bolts & washers, turn buckle etc

Strengthening of existing damaged pole by providing and welding 1.2mtr long 3 No MS angle 65*65*6mm and carrying out required grouting and pole plinth activities as per approved drawing and technical specification.

Reconductoring of 11 kV UG line.

Survey, route alignment & pole spotting and detection of existing electrical/telephonic cable/and other utilites of public utilites departments with the help of utilitiy dectector and preparation of survey report and uploading in the web portal after approval of Project Manager.

Excavation of additional pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and specifications:

11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as per IS 2629 (1985)

Excavation of additional pole pit (of depth 1/6th of pole length) in soft rock /soft rock/ mettalic road/ RCC / khranja as per scope of work, approved drawings and specifications:

11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as per IS 2629 (1985)

Erection of following types of poles for 11 KV overhead line by providing and installing danger plate, anti-climbing devices (barbed wire), earthing material (coil and 8SWG GI wire), red oxide & aluminium paint, pole numbering including cement concrete foundation or refilling by bolders using cement concreting foundation 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) volume 0.5 cub mtr. or/and 200 mm average size bolders mixed with excavated earth etc. along with 250 mm dia x 12 Inch size muffing using cement concrete of 1:2:4 (1 Part cement, 2 Part coarse sand and 4 Parts 20 mm aggregate stone chip) as per scope of work, approved drawings and specifications:

11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as per IS 2629 (1985).

Excavation of stay pit in following type of soils, as per scope of work, approved drawings and specifications:

Normal soil

Soft rock soil/soft rock/ metallic road/ RCC / kharanja

Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (2 Nos.) and 0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) as per technical specifications, approved drawings and scope of works.

Erection, testing and commissioning of 11 kV insulator including their hardware fittings as per technical specification, approved drawings and scope of work.

11 kV Pin insulator with GI pin

11 kV Disc insulator 70 KN with strain hardware

Erection, testing & commissioning of pre-fabricated galvanized steel items like V cross arm, top clamp, DC cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, etc made of GS Channels, GS angle, GS flats of given sizes for over head structures and GS nuts, bolts & washers including painting by red oxide & aluminium paint as per technical specification, approved drawings and scope of work.

Earthing arrangement as per technical specificatons, approved drawings and scope of work.

Excavation, erection, testing & commissioning of Spike Earthing 2540 mm long with 20mm solid GI Rod

Excavation, erection, testing & commissioning of 8 SWG G.I. Earthing Coil 115 tones (1.85 Kg)

Erection of 8 SWG GI wire for earthing and guarding by providing GI nut, bolts & washers, turn buckle etc

Laying of 11kV cable through HDD method including digging of pit

Digging of Trench .6 mtr wide .9 mtr to 1.5 mtr deep for laying of Pipe and Cable

NORMAL SOIL

SOFT ROCK / kharanja

HARD ROCK / metallic road/ RCC

Laying of GI Pipe 6" dia in above digged trench and for raising Cable on double Pole/Structure

Laying of 11 kv Cable through above Pipe

Laying of Cable in above digged trench and also mounting Upto line by using bricks/ sand &stone pad as per REC norms

Making and Mounting of heat shrinkable jointing kit for 11 KV 3x185 sqmm XLPE Cable

Digging suitable Pit and making straight through joint 11 KV 3x185 sqmm

Making of Straight Through joint and Construction of RB Pit 3x1x1 mtr. with 9 inch thick side wall and 6 inch thick RCC bed along with RCC Trench Cover in Three Parts duly plastered and finsihed for housing St. through joint. box and filled with sand.

Road restoration Charges

NORMAL SOIL

SOFT ROCK / kharanja

HARD ROCK / metallic road/ RCC

Installation of 11 KV CAPACITOR BANK INCLUDING MOUNTING STEEL GALVANISED STRUCTURE AND ACCESSORIES AS REQUIRED AS PER DETAILED TECHNICAL SPECIFICATIONS, DRAWING AND SCOPE OF WORKS IN FOLLOWING ARRANGEMENTS:

Erection of 12.65 KV, 3960 KVAR, Three phase, 50 C/S Outdoor Type Capacitor Bank. Bank shall be completed with all associated equipment like 11 KV VCB switch gear with complete arrangement for connecting to existing bus bar alongwith adaptor panel, Capacitor Unit, Aluminium Busbar, Pin and Post Insulator, Expulsion Fuse, 11 KV Three Phase oil cooled RVT, 12 KV Three Phase Outdoor Type Metal enclosed vacuum capacitor switch, 11 KV 400 Amp. off load Isolator with earth switch with mounting structure, 9 KV, 10 KA Station class lightening arresstor, Indoor type control unit, Hotdip glavanised structure for complete system, Control Cable, Lug, Thimbal, Junction Box, Deep bore 40 ft. pipe earthing for structure and LA.

Erection of 11 Kv 3x185 sqmm XLPE cable

Erection of Heat shrinkable Jointing Kit for 11 KV 3x185 sqmm XLPE Cable

Heat shrinkable Jointing kit for 11 KV 3x185 XLPE Cable-Indoor/Outdoor termination Kit

Laying of 11 kV XPLE insulated Dog conductor (with all accessories)