DataScienceEle_2025

Amount

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated Single Core unsheathed FRLS copper Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with Module GI switch box inflush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sqmm copper wire and making good of the concealed portion with suitable colour for concealed PVC Light point/ Fan Point (For electronic regulator) (5 Points Per Coil)(Higher end) etc., complete complying with standard specification and as directed by the departmental officers..

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated Single Core unsheathed FRLS copper Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with Module GI switch box inflush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sqmm copper wire and making good of the concealed portion with suitable colour for concealed PVC Light point/ Fan Point (For electronic regulator) (6 Points Per Coil)(Higher end) etc., complete complying with standard specification and as directed by the departmental officers..

Wiring with 3x1.5 sqmm (22/0.3) PVC insulated Single Core unsheathed FRLS copper Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with Module GI switch box inflush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 1.5 sqmm copper wire and making good of the concealed portion with suitable colour for concealed PVC stair case Light point (Higher end) etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of single box type 4'20 W LED flu Fitting (Higher end) complete with electronic driver with TW round block on wall or ceiling with flu. LED Tube with PVC unsheathed leads from terminals to the fitting etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of single box type 4'20 W flu fitting complete with electronic driver (Higher end) with conduit pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with LED tube etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of 4'20W twin box type LED flu Fitting (Higher end) complete with conduit pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with LED tube etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of WT bulk head fitting with guard (Higher end) suitable with 7W/9W LED bulp etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of 2'x2' 6500K 24W LED surface/Recesses mounted square type LED Fitting (Higher end) complete on ceiling, with PVC unsheathed Copper leads from the terminals to the fittings etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of 48W LED street light fitting with heat resistant toughened glass with IP 65 Prtection in suitable dia GI pipe (Class 'B') complete on the existing post or wall with PVC unsheathed Copper leads MS clamps and aluminium painting (Higher end) etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of 1200 mm (48") AC ceiling fan High speed complete (Higher end) with 2 module 100W fan step regulator (Higher end) with 600 mm down rod on the existing fan clamp etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of 300 mm (12") sweep (light duty) AC exhaust fan complete with out provision of hole in the wall etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of louver shutter arrangements for 300 mm (12") sweep (light duty) AC exhaust fan etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of 250 mm (10 inch) sweep modular AC exhaust fan complete necessary without provision of hole in the wall. etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of 2 Nos. 6A two module 5 pin socket, 3 Nos 6A one module switch with module cover plate (Plastic) on suitable module concealed box (GI) inflush with wall with connections. etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of 1No 6A/16A two module socket, 1 No 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) inflush with wall with connections. (Higher end) etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of 1No 16A two module switch with module cover plate (plastic) on suitable module concealed Box (GI) inflush with wall with connections. (Higher end) etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of 1No 6A/16A two module socket with module cover plate (plastic) on suitable module concealed Box (GI) inflush with wall with connections. (Higher end) etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of 1No 6A two module switch with module cover plate (plastic) on suitable module concealed Box (GI) inflush with wall with connections. (Higher end) etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of 1No 6A two module socket with module cover plate (plastic) on suitable module concealed Box (GI) inflush with wall with connections. (Higher end) etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of 20 Amps DP Plug and Socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug) [Higher end) etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of 32A DP MCB in suitable sheet steel enclosure in flush with wall with earth connection (Higher end) etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of 63A DP MCB in suitable sheet steel enclosure in flush with wall with earth connection (Higher end) etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of 63A FP MCB in suitable sheet steel enclosure in flush with wall with earth connection (Higher end) etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure Distribution board with Double Door(metal) with 1No 32 Amps DP MCB switch as incoming and 10 No’s 6 Amps to 32 Amps SP MCB as outgoing in flush with wall with earth connection only. (Higher end) etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure Distribution board with Double Door and 1No 63 Amps DP MCB switch as incoming and 10 No’s 6 Amps to 32 Amps SP MCB as outgoing in flush with wall with earth connection only. (Higher end) (UPS) etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal /acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB / Isolators (totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm with the following in flush with wall with earth connection only. (for lighting & power distribution) 1) 63A FP MCB - 1 No. 2) 63A FP 30MA RCCB/ELCB - 1 No 3) 63A DP MCB Isolator - 3 Nos. 4) 6A to 32A SPMCB - 12 Nos. etc., complete complying with standard specification and as directed by the departmental officers..

Supply and Fixing of 3 Ph 8 way Vertical type 160 A 16 KA MCCB DB with IP 43 protection Double door type DB (legrand) with 1No 125A 4P MCCB 16 KA as incoming and 6 No's 63A TP MCB 10 KA and 2Nos 32A TP MCB as outgoing with cable entry boxes in suitable angle iron frame work with earth connection only. (Higher end) (Total Power DB) etc., complete complying with standard specification and as directed by the departmental officers..

Supply and Fixing of 3 Ph 4 way Vertical type MCCB DB with IP 43 protection Double door type DB (legrand) with 1No 125A 4P MCCB 16KA as incoming and 4 No's 63A TP MCB 10 KA as outgoing with cable entry box on suitable angle iron frame on wall with earth connection only. (Higher end) (Total Lighting) etc., complete complying with standard specification and as directed by the departmental officers..

Sub switch Panel: Supply and Errection of 200A capacity dust and vermin proof cubical panel board made up of 16 SWG CRCA sheet steel with supply and fixing of the following interior mounting fuse switch with HRC fuses arrangement in two Horizontal rows with one switch over the other, with a central bus bar chamber and two ends one on each side next to the fuse switch chamber and cable alloy conforming to IE rules INCOMER: 200A TPN switch disconnector fuse units interior only with HRC fuse Double Break Switch -1 No OUTGOING: 125A TPN switch disconnector fuse units interior only with HRC fuse Double Break Switch -5 Nos 63A TPN switch disconnector fuse units interior only with HRC fuse Double Break Switch -3 Nos (All the TPN Switch should be Siemens with Front Handle) Suitable The bus bar chamber will consist of suitable size of tinned copper flat for phase and neutral buses on epoxy moulded bus insulated at proper and sufficient spacing between the buses as per IE Rules. This bus bar chamber should be segregated from the adjacent chamber by providing hylem sheet of suitable thickness as partisans. 2 Nos 25x3mm tinned copper flats should be provided all round the panel for earth bus. etc., complete complying with standard specification and as directed by the departmental officers..

Sub switch Panel: Supply and Errection of 315A capacity dust and vermin proof cubical panel board made up of 16 SWG CRCA sheet steel with supply and fixing of the following interior mounting fuse switch with HRC fuses arrangement in two Horizontal rows with one switch over the other, with a central bus bar chamber and two ends one on each side next to the fuse switch chamber and cable alloy conforming to IE rules INCOMER: 315A TPN switch disconnector fuse units interior only with HRC fuse Double Break Switch -1 No OUTGOING: 200A TPN switch disconnector fuse units interior only with HRC fuse Double Break Switch -3 Nos (All the TPN Switch should be Siemens with Front Handle) Suitable The bus bar chamber will consist of suitable size of tinned copper flat for phase and neutral buses on epoxy moulded bus insulated at proper and sufficient spacing between the buses as per IE Rules. This bus bar chamber should be segregated from the adjacent chamber by providing hylem sheet of suitable thickness as partisans. 2 Nos 25x3mm tinned copper flats should be provided all round the panel for earth bus. etc., complete complying with standard specification and as directed by the departmental officers..

SSupply and run of 2 of 2.5 sq mm PVC insulated SC unsheathed Cu. Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling and making good of the concealed portion etc., complete complying with standard specification and as directed by the departmental officers..

Supply and run of 2 of 2.5 sq mm PVC insulated SC unsheathed FRLS copper Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with contineous earth wire connection of 2.5 sqmm copper wire with and making good of the concealed portion. etc., complete complying with standard specification and as directed by the departmental officers..

Supply and run of 2 of 2.5 sq mm PVC insulated SC unsheathed FRLS copper Conductor of 1100V Grade in suitable PVC rigid pipe on wall and ceiling with contineous earth wire connection of 2.5 sqmm copper wire with painting of suitable colour etc., complete complying with standard specification and as directed by the departmental officers..

Supply and run of 2 of 4.0 sq mm PVC insulated SC unsheathed FRLS copper Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with contineous earth wire connection of 4.0 sqmm copper wire and making good of the concealed portion with suitable colour etc., complete complying with standard specification and as directed by the departmental officers..

Supply and run of 2 of 6.0 sq mm PVC insulated SC unsheathed FRLS copper Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with contineous earth wire connection of 6.0 sqmm copper wire and making good of the concealed portion with suitable colour. etc., complete complying with standard specification and as directed by the departmental officers..

Supply and run of 4 of 6 sq mmPVC insulated SC unsheathed FRLS copper Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with contineous earth wire connection of 6 sqmm copper wire and making good of the concealed portion with suitable colour etc., complete complying with standard specification and as directed by the departmental officers..

Supply and run of 4 of 10 sq mm PVC insulated SC unsheathed FRLS copper Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sqmm copper wire and making good of the concealed portion etc., complete complying with standard specification and as directed by the departmental officers..

Supply and run of 4 of 16 sq.mm (101/0.45) PVC insulated SC unsheathed Cu. Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 16 copper wire and making good of the concealed portion with painting of suitable colour etc., complete complying with standard specification and as directed by the departmental officers..

Supply and laying of 3 1/2 X 120 sq mm PVC armoured LTUG cable in suitable size HDPE pipe in a trench excavated at a depth of 0.75 metre and refilling the earth to make good etc., complete complying with standard specification and as directed by the departmental officers..

Supply and laying of 3 1/2 X 120 sq mm PVC armoured LTUG cable in Suitable GI pipe and covering the cable completely with brick and refilling the earth to make good etc., complete complying with standard specification and as directed by the departmental officers..

Supply and clamping of 3 1/2 X 120 sq mm PVC armoured LTUG cable on post or on wall with MS Clamps etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of brass cable gland for 3 1/2 X 120 sqmm PVC LTUG armoured cable with earth connection etc., complete complying with standard specification and as directed by the departmental officers..

Supply and providing cable end termination of 3 1/2 X 120 sq mm PVC LTUG Aluminum armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc., complete complying with standard specification and as directed by the departmental officers..

Earthing as per the ISI specification with an earth electrode of 2.1 mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mmx50mmx6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of 25x3mm copper flat with necessary clamp/ supports on wall / floor / ground for earth connection etc., complete complying with standard specification and as directed by the departmental officers..

Supply and run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall/floor/ground for earth connection etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of LT cable route indicator with suitable angle not less than 38mm x 38mm 6mm and 0.6mtr long excavation of earth to a depth of 0.6 mtr and concreting the ground level and making good of the ground as directed by the departmental officers etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of 80 mm x 50 mm GI trunking system concealed with floor/wall including suitable accessories such as divider, cover joint, end cap with top and bottom part joint etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting withconstruction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 60W LED street light fitting with LED (Lower end) with 1 metre 32mm dia.GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC boxwith PVC unsheathed copper leads from SMC box to fitting and with painting of uitable colour etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of coil earth to street light poles with No.8 SWG GI wire of 11.5 meters of length in which 10 meters of total length compressed in to a coil of one metter length (75mm to 100mm dia) connected suitable with hexagonal eath bolt of size 8mm in to 25 mm welded on the pole at one end with a coil position fixed on the earth. etc., complete complying with standard specification and as directed by the departmental officers..

Supply and laying of 2 X 10 sq mm PVC armoured aluminum LTUG cable in a trench to be excavated at dept of 0.75 mtr putting 0.15 layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc., complete complying with standard specification and as directed by the departmental officers..

Supply and clamping of 2 X 10 sq mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps etc., complete complying with standard specification and as directed by the departmental officers..

Supply and fixing of brass cable gland for 2 X 10 sq mm PVC armoured LTUG cable with earth connection etc., complete complying with standard specification and as directed by the departmental officers..

Sub Total

UNIVERSAL CIRCUITS (BID ID -1405057)

Rigiki Electricals and Control Systems (BID ID -1404660)