Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.3 LAccepted-AOC | L1 | Accepted-AOC BEING L1 BIDDER | |
| 2 | L2₹42.3 L+₹91,722 (2.22%)Rejected-Finance MES CHOWPATTI HASIMARA DIST JALPAIGURI WB PIN 735215 | HASIMARA | JALPAIGURI | WEST BENGAL | 735215 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹43.7 L+₹2.3 L (5.67%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹44.2 L+₹2.8 L (6.82%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹44.6 L+₹3.3 L (7.97%)Rejected-Finance | L5 | Rejected-Finance Other than L1 |
Tender Value
₹41 L
EMD Value
₹82,000
Closing Date
30 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) HASIMARA
GE (AF) HASIMARA PO-HASIMARA DIST- ALIPURDUAR PIN-735215
ADDN/ALTN OF BLDG NO 851 OF NCS (E) AREA AT AF STN HASIMARA
2024_MES_649652_1
C/8738/2024-25/E8
Open Tender
Civil Works
Item Rate
210 days
GE (AF) HASIMARA
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) HASIMARA
₹82,000
Yes
21 May 2024
8 Apr 2024
2 May 2024
8 Apr 2024
30 Apr 2024
23 Apr 2024
Amount
S&F pre painted galvalume aluminium zinc coating, GI based corrugated steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including dismantling of old sheeting, any gauge or thickness of any description, complete all as specified and directed. Note : (i) Bidder should visit the site of work before quoting his bid, no cognizance shall be entertained after accetance of tender. (ii) Moulding of corrugate sheet to maintain the actual curvature of roof shall be done through authorised/skilled fabricators at site to maintain the actual curvature of roof, and cost of moulding shall deemed to be included in the unit quoted rate.
S&F 2mm thick transparent corrugated clear polycarbonate sheet, UV coated, ISI marked, as in roof covering, fixed with necessary frame support and srcews, bolts etc including dismantling of old sheeting, any gauge or thickness of any description, complete all as specified and directed.
S&F pre painted galvalume aluminium zinc coating, GI based plain steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including dismantling of old sheeting any gauge or thickness of any description, complete all as specified and directed.
Taking down cement plaster on brick or concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc including removal of rubbish off the premises, complete all as specified and directed. (Note : Necessary preventive measures should be taken by the contractor at his own cost to avoid damage of the existing PVC flooring while carrying out the work.)
M&L 15mm thick rendering in CM (1:6) on other than fair faces of brick work or concrete surfaces of wall, finished even and smooth without using extra cement, complete all as specified and directed. (Note : Necessary preventive measures should be taken by the contractor at his own cost to avoid damage of the existing PVC flooring while carrying out the work.)
M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with integral water proofing compound top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item as supply only.)
Supply only liquid water proofing compound of approved quality, complete all as specified and directed.
M&L for preparing surfaces of new plastered or unplastered wall and applying two coats of oil bound distemper over and including one coat of wall care putty of 2mm thick, complete all as specified and directed. (Note : The existing PVC flooring should be covered accordingly to avoid strain on flooring, while painting and quoted rate shall deemed to be included the provision also.)
M&L for preparation of surfaces of new plastered surfaces of wall and applying two coats of acrylic smooth exterior emulsion paint of required shade, applied @ 1.67Ltr/10 sqm over and including primming coat of exterior primer applied @ 2.20 Kg/10sqm, complete all as specified and directed.
Demolition of bricks work or stone/boulder masonary, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete aritcles, complete all as specified and directed.
M & L for brick work with sub class 'B' bricks, old size bricks, straight or curved on plan exc 6m mean radius built in CM (1:6), complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for and removing from site, complete all as specified and as directed.
S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy brackets framing (beam, tee, angle, channel or flat section) including distance pieces cleats etc Fe 410W (Gde E-250), complete all as specified and directed.
S&F mild steel work in tubular trusses, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 including applying one shop coat of zinc chromate primer paint after preparation of surfaces, complete all as specified and directed.
M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer, complete all as specified and as directed. (Note: The existing PVC flooring should be covered accordingly to avoid strain on flooring, while painting and quoted rate shall deemed to be included the provision also.)
M&L for preparation of old decorated steel surfaces of width or girth exc 10cm and applying one coat of synthetic enamel paint (1st grade quality), complete all as specified and directed. (Note : The existing PVC flooring should be covered accordingly to avoid strain on flooring, while painting and quoted rate shall deemed to be included the provision also.)
M&L for preparation of old plastered surfaces of ceiling and applying two coats of white washing, complete all as specified and directed.
M&L for preparation of old plastered surfaces of wall including scrapping down existing finishes and applying two coats of oil bound distemper upto 10 mtr height, complete all as specified and directed. (Note : The existing PVC flooring should be covered accordingly to avoid strain on flooring, while painting and quoted rate shall deemed to be included the provision also.)
M&L for preparation of old plastered surfaces of wall, chajjaa, facia and similar work etc. and applying two coats exterior emulsion paint (in camouflage pattren/green paint), complete all as specified and directed.
M&L for complete removal of existing treatment on wall surfaces including applying 2mm thick wall care putty, complete all as specified and directed.
M&L for 50mm thick sand filling under interlocking paver block, including watering and consilidation, complete all as specified and directed. (Note : Consolidated thickness shall be measured for payment.)
M&L for 75mm thick PCC (1:3:6) type C- 2, (using 40mm graded crushed stone aggregatet) as in floors, pavings or plinth protection etc., complete all as specified and directed.
M&L for 60mm thick machine pressed pre cast concrete interlocking paver block, any shape and size confirming to IS 15658-2006, M-35 grade, set and jointed with grey cement and pigment any shape with PU coating of finishing, complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) and disposal of unserviceable materials, debris rubbish to a distance n. exc. 100m , complete all as specified and directed.
Dismantling of floor, hearth or wall tiles including cement mortar bedding (but not backing) and remvoing rubbish off the premishes, complete all as specified and directed.
M&L for scratch free, light shade, vitrified ceramic, coloured tiles, 10mm thick (square/rectangular) polished, area of each tile n.exc. 0.36 Sqm, in floors etc over and including 15mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile, complete all as specified and directed.
M&L for scratch free, light shade, vitrified ceramic, coloured tiles, 10mm thick (square/rectangular) polished, in vertical surface, skirting/dado etc. area of each tile n. exc. 0.36 Sqm over and including 10mm thick rendering in CM (1:4) and set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile, complete all as specified and directed
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in CM (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding, complete all as specified and directed.
M&L for 20mm thick granite (of any type) tiles machine cut, in skirting/dado laid over including 10m thick rendering in CM (1:4) and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, complete all as specified and directed.
Taking down chowkat with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n.exc. 4 Sqm each, complete all as specified and directed.
S &F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.
S&F MS plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe.290.Gde-E-165, complete all as specified and directed.
Note: An amount of Rs.61,200.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.
BHARAT ELECTRIC
M/S. JOGINDER KUMAR GOYAL
M/S BISHAL ENTERPRISES
M/S SARDAR MAL NAHATA
M/S. NARENDRA KUMAR GARG
Hanuman Prasad Agarwal
SHRI D P AGARWAL
SHREE SHYAM TRADERS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .