Andaman Nicobar

Active

Works

Civil Works - Buildings

Renovation of Sub Centre at Hanspuri village under SD-II, Tugapur, NACD, APWD, Mayabunder.

Chief Engineer Andaman Public Works Department (APWD)

EE, NACD, APWD, Mayabunder | North And Middle Andaman, Andaman And Nicobar Islands

Amount: ₹31.7 LCloses: 15 Oct 20266d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published6 Oct 2026
Closes15 Oct 2026
Bid Opening15 Oct 2026

Tender Value

₹31.7 L

EMD Value

₹63,372

Closing Date

15 Oct 2026, 3:00 pm6d left

Tender Inviting Organisation

Name

EE, NACD, APWD, Mayabunder

Address

EE, NACD, APWD, Mayabunder

Work Description

Renovation of Sub Centre at Hanspuri village under SD-II, Tugapur, NACD, APWD, Mayabunder.

Tender Information

Tender ID

2026_APWD_25043_1

Reference Number

NIT No. 147/2026-27/EE/NACD

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Percentage

Period of Work

270 days

Location

EE, NACD, APWD, Mayabunder

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

9 documents required · 9 mandatory

Fee/PreQual/Technical

RequiredCopy of EMD (.pdf)

RequiredCertificate of work experience (.pdf)

RequiredAffidavit as per clause 1.2.2 of CPWD 6 of NIT (.pdf)

RequiredCertificate of Valid Registration for Goods Service Tax (GST) (.pdf)

RequiredBidding capacity Form C-3 as per page No.57 of NIT (.pdf)

Required10 (Ten) Years Financial Audited statement of account from a Chartered Accountant as per Form A (.pdf)

RequiredUndertaking as per page No. 59 of NIT (.pdf)

Finance

RequiredTender document (.pdf)

Requiredboq (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹63,372

Important Dates

Last Activity

6 Oct 2026

Published

6 Oct 2026

Bid Opening

15 Oct 2026

Download Starts

6 Oct 2026

Download Ends

15 Oct 2026

Submission Starts

6 Oct 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (60 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately).	76.56	kg	1,240.34	₹94,960.1
2Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately).
2.01	6 mm thick Cement fiber board, Type-B, Category-III as per IS: 14862 :2000	102.5	sqm	1,399.41	₹1,43,439.47
3	Extra for providing and fixing wind ties of 40x 6 mm flat iron section.	60	metre	296.9	₹17,813.84
4Providing and fixing to existing door frames.
4.01	24 mm thick factory made PVC door shutters made of styles cleats. The shutter frame filled and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer- in-charge. (For W.C. and bathroom door shutter).	4.4	sqm	4,506.97	₹19,830.65
5Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer- in-charge
5.01	Extruded section profile size 42x50 mm	10.8	metre	502.95	₹5,431.86
6Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
6.01	White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests	2	each	10,272.1	₹20,544.2

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.42 MB

Work Item Documents

Tenderdocument.pdf

Tender Documents • 4.69 MB

BOQ_26495.xls

BOQ • 0.47 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately).

76.56

1,240.34

₹94,960.1

2Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately).

2.01

6 mm thick Cement fiber board, Type-B, Category-III as per IS: 14862 :2000

102.5

sqm

1,399.41

₹1,43,439.47

Extra for providing and fixing wind ties of 40x 6 mm flat iron section.

metre

296.9

₹17,813.84

4Providing and fixing to existing door frames.

4.01

24 mm thick factory made PVC door shutters made of styles cleats. The shutter frame filled and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer- in-charge. (For W.C. and bathroom door shutter).

4.4

sqm

4,506.97

₹19,830.65

5Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer- in-charge

5.01

Extruded section profile size 42x50 mm

10.8

metre

502.95

₹5,431.86

6Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

6.01

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

each

10,272.1

₹20,544.2