Loading
Loading…
Loading…
| # | Company | Offered Item | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹1.2 LQualified Make: SRS
Model: T58 0 MANDUADIH ROAD NEARBY BHARAT PETROLEUM PETROL PUMP LAHARTARA INDUSTRIAL ESTATE MANDUADIH VARANASI UTTAR PRADESH 221103 | VARANASI | UTTAR PRADESH | 221103 | Make: SRS
Model: T58 | L1 | Qualified |
Tender Value
Refer Docs
EMD Value
Exempted
Closing Date
11 Sept 2018, 9:00 amClosed
picket steel as per dgsnd drawing Experience with Gov. Required 8 Year (s) Picket Steel As Per Dgsnd Drawing ( 150 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Type of Picket Steel 1525 mm of length made from Steel angle 50x50x6 mm with minimum weight 6.37 Kg (as per drawing No DGS&D 23836 ) 3054 mm of length made from steel angle 45x45x6 mm with minimum weight 11.4 Kg (as per drawing No DGS&D 23819)
1830 mm of length made from Steel angle 45x45x6 mm with minimum weight 6.73 Kg ( as per drawing No DGS&D 19207/4)
1830 mm of length made from Steel angle 50x50x6 mm with minimum weight 7.69 Kg (as per drawing No DGS&D 23837-A)
610 mm of length made from Steel angle 45x45x5 mm with minimum weight 1.78 1/4 Kg (as per drawing No DGS&D 17690/4)
1525 mm of length made from Steel angle 50x50x6 mm with minimum weight 6.37 Kg (as per drawing No DGS&D 23836 )
760 mm of length made from Steel angle 50x50x6 mm with minimum weight 3.07 Kg (as per drawing No DGS&D 23835) Availability of DGS&D Drawing https:/dgserver.dgsnd. gov.in/rc/Drg_Picsteelg em1.pdf * Read DGS&D Drawing and fully understood YES * Mode of Purchase on GeM Bidding
Freight Intensive Item * CONSTRUCTIONAL Material Structural Steel Section
Grade Designation E 250
Quality A of IS 2062-2011 * Finish Steel Pickets shall be free from burs and sharp edges YES * Finish Two coats of red oxide zinc chromate primer paint coforming to IS 2074-1992 * PERFORMANCE Tolerances on Angular Dimensions As per Tolerance Class - Coarse of Table-3 of IS 2102 Part-1 1993 * Dimentional Tolerance of the rolling material except cutting length As per IS 1852-1985 * Tolerances on Linear Dimensions As per Tolerance Class - Coarse of Table-1 of IS 2102 Part-1-1993 * Tolerances on Broken Edges As per Tolerance Class - Coarse of Table-2 of IS 2102 Part-1-1993 * CERTIFICATION Availability of Test Reports of from Central Govt/State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification YES * 2/4 Test Report No and Date - * Name and Address of the Lab - * Test report to be furnished to the buyer on demand YES * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Anil Kandari 560007
2 ASC Training Centre Agram Post
Bangalore-56007 Near Trinty Circel 150 15
583010
GEM/2018/B/82688
picket steel as per dgsnd drawing
15 days
Karnataka; Bengaluru Urban
PRODUCT
| Item | Delivery Location | Qty | Delivery |
|---|---|---|---|
| picket steel as per dgsnd drawing Experience with Gov. Required 8 Year (s) Picket Steel As Per Dgsnd Drawing ( 150 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Type of Picket Steel 1525 mm of length made from Steel angle 50x50x6 mm with minimum weight 6.37 Kg (as per drawing No DGS&D 23836 ) 3054 mm of length made from steel angle 45x45x6 mm with minimum weight 11.4 Kg (as per drawing No DGS&D 23819) | - | - | - |
| 1830 mm of length made from Steel angle 45x45x6 mm with minimum weight 6.73 Kg ( as per drawing No DGS&D 19207/4) | - | - | - |
| 1830 mm of length made from Steel angle 50x50x6 mm with minimum weight 7.69 Kg (as per drawing No DGS&D 23837-A) | - | - | - |
| 610 mm of length made from Steel angle 45x45x5 mm with minimum weight 1.78 1/4 Kg (as per drawing No DGS&D 17690/4) | - | - | - |
| 1525 mm of length made from Steel angle 50x50x6 mm with minimum weight 6.37 Kg (as per drawing No DGS&D 23836 ) | - | - | - |
| 760 mm of length made from Steel angle 50x50x6 mm with minimum weight 3.07 Kg (as per drawing No DGS&D 23835) Availability of DGS&D Drawing https:/dgserver.dgsnd. gov.in/rc/Drg_Picsteelg em1.pdf * Read DGS&D Drawing and fully understood YES * Mode of Purchase on GeM Bidding | - | - | - |
| Freight Intensive Item * CONSTRUCTIONAL Material Structural Steel Section | - | - | - |
| Grade Designation E 250 | - | - | - |
| Quality A of IS 2062-2011 * Finish Steel Pickets shall be free from burs and sharp edges YES * Finish Two coats of red oxide zinc chromate primer paint coforming to IS 2074-1992 * PERFORMANCE Tolerances on Angular Dimensions As per Tolerance Class - Coarse of Table-3 of IS 2102 Part-1 1993 * Dimentional Tolerance of the rolling material except cutting length As per IS 1852-1985 * Tolerances on Linear Dimensions As per Tolerance Class - Coarse of Table-1 of IS 2102 Part-1-1993 * Tolerances on Broken Edges As per Tolerance Class - Coarse of Table-2 of IS 2102 Part-1-1993 * CERTIFICATION Availability of Test Reports of from Central Govt/State Govt/NABL/IL AC accredited Lab to prove conformity to the Specification YES * 2/4 Test Report No and Date - * Name and Address of the Lab - * Test report to be furnished to the buyer on demand YES * * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Anil Kandari 560007 | - | - | - |
| 2 ASC Training Centre Agram Post | - | - | - |
| Bangalore-56007 Near Trinty Circel 150 15 | - | - | - |
Exempted
11 Sept 2018
7 Sept 2018
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid_583010.pdf
GEM_BID
termsCondition.pdf
OTHER
2657c7ca70287299b5181580fdb5a7ab.pdf
OTHER
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .