PROVISION OF STORE AND GUEST ROOM AND TOILET BLOCK UNDER GE (NORTH) BANGALORE

Amount

Surface Excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in hard / dense soil etc complete all as specified and as directed

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, laying of cables/Erecting of pole not exceeding 10 sqm on plan and not exceeding 1.5m in depth and getting out in hard / dense soil etc complete all as specified and as directed .

Returning, filling including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick with soil etc complete all as specified and as directed.

Removing exceeding Excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5km above the starting point etc complete all as specified and as directed

Material and Labour for plain cement concrete 1:4:8 type D-2, with using 40mm graded stone aggregates as in foundations and mass concrete etc complete all as specified and as directed

Material and Labour for providing reinforced cement concrete (M-25) Design Mix with using 20 mm graded stone aggregates as in Foundation, including rafts, footings, plinth beam etc complete all as specified and as directed

Material and Labour for Reinforced cement concrete M-25 (design mix) with using 20mm graded stone aggregates as in slab supported on walls, beam and columns in floors, roofs landing balconies canopies etc complete all as specified and as directed

Material and Labour for providing reinforced cement concrete (M-25) Design Mix with using 20mm graded stone aggregates as in beam, cantilevers, bressumers, lintels over 1.5 metre span etc complete all as specified and as directed

Material and Labour for providing reinforced cement concrete (M-25) design Mix with using 20 mm graded stone aggregates as in coloumn, pillars, piers, posts and struts etc complete all as specified and as directed

Material and Labour for ATT for treating the bottom and sides of exceeding Excavation at the rate of 5 Liters of emulsion per square meter of surface area complete all as specified and as directed

Material and Labour for ATT for treating the back fill in contract with foundation at the rate of 7.5 Liters of emulsion per Sqm of vertical surface (area of the sub structure in contact with back fill to be measured ) etc complete all as specified and as directed

Material and Labour for ATT for treating the top surface of filled up earth at the rate of 5 Ltrs of emulsion per square meter of surface complete all as specified and as directed

Material and Labour for ATT for treating the soil under plinth protection at the rate of 5 Litres of emulsion per square meter of surface complete all as specified and as directed

Material and Labour for ATT for treating the soil along with external perimeter of building at the rate of 2.25 Litres of emulsion per metre of the wall etc complete all as specified and as directed

Material and Labour for Providing precast cement concrete solid block masonry, Type C1, 1:3:6 (20 mm graded aggregate) solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar in CM 1:6, complete, in walls, complete etc complete all as specified and as directed

Material and Labour for Pre-cast cement concrete block masonry, Type C1, 1:3:6 (20 mm graded aggregate) with solid blocks, exceeding 10 cm in width and setting in mortar 1:6 , complete etc complete all as specified and as directed

Material and Labour for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed

All as per item No 1.017 above but 6 to 8 mm dia etc complete all as specified and as directed

All as per item No 1.017 above but 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders etc complete all as specified and as directed

Material and Labour for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or etc complete all as specified and as directed.

Material and Labour for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200m thick (Horizontal or sloping) with Rough finished surfaces of concrete (Flat) etc including edges of roof slab etc complete all as specified and as directed .

Supply and Fixing of Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm (with rough finished surface of concrete) etc complete all as specified and as directed

Material and Labour for formwork to sides and soffits of floor or roof beam, beam and haunching, girders, bressummers, lintels cantilevers, shelves including supports, overhangs etc also splays between floor and beam with rough finished etc complete all as specified and as directed

Material and Labour for formwork to sides of pillars, posts, struts, piers, coloumns and stanchions, for square, rectangular or polygonal, rough finished surfaces of concrete etc complete all as specified and as directed

Material and Labour for rendering for ceiling 5 mm thick in CM 1:3 on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed.

Material and Labour for rendering 15 mm thick in CM (1:4) on other than fair faces of brick work or concrete surface mixed with water proofing compound where ever is required as per manufacture instruction finished even and smooth without using extra cement etc complete all as specified and as directed.Notes : WPC shall be measured and paid separately

Material and Labour for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surface finished and smooth without using extra cement etc complete all as specified and as directed

Material and Labour for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, Chajja kerbs, roof padding/staging of water tank etc including necessary formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed

Material and Labour for 10mm cement plastering in CM (1:3) as in horizontal and vertical surface of brick work or concrete surface mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed.Notes : WPC shall be measured and paid separately

Material and Labour for applying APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017, 3mm thick and weighing not less than 3.60kg/Sqm reinforced with non woven polyster/HMHDPE matt black finished over compatible primer/bonding bitumen @ 0.40 Litr/Sqm and torch applications of membrane with 75mm side overlap and 100mm end lap after necessary preparation of surface complete as per manufacturer's instructions and applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sqm complete all as specified and directed etc complete all as directed.

Supply only Liquid water proofing compound.

Spreading M-sand and levelling in well layers not exceeding 25 cm thick including watering as required etc complete all as specified and as directed

Material and Labour for Hard core with broken stone or boulder of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick water and rammed to a true surface etc all as specified and as directed

Material and Labour for 75 mm thick cement concrete (1:4:8) type D-2 with using 40 mm graded stone aggregates) as in sub base of flooring etc complete all as specified and as directed .

Material and Labour for cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregates) 25 mm thick as in sub base of flooring etc complete all as specified and as directed.

Material and Labour for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed.

Material and Labour for 15 to 18 mm thick Sadarahalli stone as in flooring, jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding the edges including rubbing and polishing etc complete all as specified and as directed.

Material and Labour for Non Skid ceramic tiles coloured 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed.

Material and Labour for vitrified ceramic tiles (Dark shade/double charged/ultra charged) 9- 10mm thick (square /rectangular) polished, area of each tiles exceeding 0.42sqm but not exceeding 1.00 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

Material and Labour for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc complete all as specified and as directed.

Material and Labour for M Sand Cushioning for Paving Block tiles etc complete all as specified and directed

Material and Labour for machine pressed pre-cast concrete interlocking coloured paving Block of glass fiber reinforced glossy finished vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade to match with grey cement and pigment etc complete all as specified and as directed

Material and Labour for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat of dado/skirting etc complete all as specified and as directed.

Material and Labour for Glazed ceramic tiles coloured 300mmx 450mm , 6 to 7 mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and as directed.

Material and Labour for vitrified ceramic tiles (Dark shade/double charged/ultra charged) 9-10mm thick (square /rectangular)polished, area of each tiles exceeding 0.42sqm but not exceeding 1.00 sqm in vertical surfaces such as skirting/dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

Material and labour for 15 to 18 mm thick Sadarahalli stone as in riser and steps, skirting, dado, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including etc complete all as specified and as directed

Material and Labour for 18-20mm Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and as directed.

Supply and Fixing of 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with one or more rebate including necessary fixing lugs, locks strike plate etc complete all as specified and as directed

Supply and Fixing of Factory made 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with one or more rebate including necessary fixing lugs, locks strike plate etc complete all as specified and as directed.

Supply and Fixing of 35mm thick flush door shutter solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and Fixing of Powder Coating (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed

Supply and Fixing of Powder Coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws etc. complete all as specified complete all as specified etc complete shall as specified and as directed.

Material and Labour for Framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290, Gde-E-165 etc complete all as specified and as directed

Supply and fixing of Box type Steel Windows/Ventilators double side shutters (Windows side hung type , Ventilators top hung) pressed steel frames made out CRC Sheet of 80x60x1.25mm double rebated, Shutters box type made out of CRC Sheet of 40x20x1.0mm , windows & ventilator shutter fixed made of glass and gauge fixed with box type hinges, Aluminium die cast handles for glass shutters, Iron flat type handles for mesh shutters, Telescopic stays, etc complete all as specified including 12mm square guard bars/grill welded with steel frame (100mmc/c horizontally) all as specified and directed by Engineer-in-Charge. NOTE: (i) Payment under this item will be make combined for steel frames, steel shutters and Guard bar/Grill, However unit rate quoted shall deemed to includingude cost of beading, fittings such as handles, hinges, Telescopic stays, locking arrangements and fixing of glass and wire mesh etc. (ii) 4 mm thick sheet glass and 0.36 mm dia stainless steel wire mesh be measured and paid separately. (iii) Weight of Grill/Guard Bars, handle, hinges and locking arrangements shall not be accounted for payment purpose .(Note : All Windows/Vent design as per CECZ TD drg No 539)

Material and Labour for cement concrete 1:3:6 type C-1 (using 20mm graded aggregate) as in hold fast and filling of pressed steel chowkhat etc complete all as specified and as directed.

Supply and Fixing of Factory Made Solid PVC moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick moulded Prelaminated PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face etc complete all as specified and as directed

Supply and Fixing of Solid PVC door frame (Single Rebated) of size 50mm x 47mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffeners and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) etc complete all as specified and as directed.

Supply and Fixing of Aluminium anodized tower bolt 200 mm long of extruded section etc complete all as specified and as directed

Supply and Fixing of for 100mm butt hinges, heavy weight, Stainless Steel etc complete as specified and directed

Supply and Fixing of 150 mm long aluminium handle, cast type, anodized etc complete all as specified and as directed

Supply and Fixing of 150 mm floor door stopper of aluminium alloy powder coated, with hard down steel spring all as specified and as directed.

Supply and fixing of mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed.

Supply and fixing of aluminium alloy, anodized sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed .

Supply and fixing of Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.

Supply and fixing of 4mm thick sheet Glass, Ordinary quality and glazing with oil putty in squares in not exceeding 0.5 sqm in each pane etc complete all as specified and as directed

Supply and fixing of 4mm thick Figured Glass, Pin head type and glazing with oil putty in squares in not exceeding 0.5 sqm in each pane etc complete all as specified and as directed

Material and Labour for 75 mm thick PCC 1:3:6, type C-1, using 20 mm graded aggregates as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade "A" complete all as specified and directed.

Supply and fixing of 20 mm dia bore CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. Notes : Internal CPVC Pipe line to be concealed in wall of any pattern, where ever pipe line is passing back side of tiles including cutting chasses in brick/concrete wall, nothing extra shall be admissible on this account.

Supply and fixing of 25 mm dia bore CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

Supply and fixing of rotational moulded PVC water storage tank 1000ltrs capacity conforming to IS-12701(1989) cylindrical vertical type double-layered with closed top including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc complete all as specified and as directed

Supply and fixing of Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore etc complete all as specified and as directed

Supply and fixing of 25 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe etc complete all as specified and as directed.

Supply and fixing of 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed.

Supply and fixing of Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC SWR P trap connecting to flush pipe and to anti syphonage pipe, etc. complete all as specified and directed.

Supply and fixing of vitreous china wash down water closet pan (Pedestal Pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete of Cera model cat pt no. 2008 including plastic EWC seat cover, coloured closed pattern with flat bottom and cover of Cera model cat pt 2308 and mild steel chromium plated or aluminized hinging device complete all as specified and directed

Supply and fixing of PVC Deo flushing cistern valve less with flushing out valve, low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc including PVC connection 450 mm long complete all as specified and as directed (Make Cat no BA-502 of Prayag of equivalent make of Cera)

Supply and fixing of white vitreous china wash basin of oval shape of size 560X410X180mm excluding taps but including 32 mm dia chromium plated fitting, PVC waste pipe 610 mm long and PVC connection 450 mm long complete all as specified and as directed.

Supply and Fixing of Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, beddings urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including 40 mm dia PVC waste pipe 610 mm long and PVC connection 450 mm long, flush pipe, grating and Union for discharge pipe etc complete all as specified and as directed.

Supply and fixing of brass CP wall mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed. (Cat No-7875 URBONA series of Prayag or equivalent make as specified in CA)

Supply and fixing of 15 mm Single lever Basin mixture tall height W/o Pop Up waste system all as specified and as directed.(Cat No PIS-7852 URBONA series of Prayag or equivalent make as specified in CA)

Supply and fixing of chromium plated long body bib tap 15mm dia with CP flange all as specified and as directed. (Cat No-PIS-08H Neptune series of Prayag or equivalent make as specified in CA)

Supply and fixing of Bib Cock 2 way double handle with CP flange as fixed in repair all as specified and as directed. (Cat No-7812 URBONA series of Prayag or equivalent make as specified in CA)

Supply and fixing of Health faucet, brass body with 1mtr SS braided tube & wall hook complete all as specified and as directed (Cat No-BEA-41/BEA-85 of Prayag or equivalent make as specified in CA)

Supply and fixing of 15 mm pillar taps swan neck type, chromium plated cast copper alloy fancy type complete all as specified and as directed.(Cat No PIS-14H Neptune series of Prayag or equivalent make as specified in CA)

Supply and fixing of 15mm angle cock CP cast copper alloy screwed down high pressure with capstan head handle screwed both ends or for unions etc . (Cat No PIS-10H Neptune series of Prayag or equivalent make as specified in CA)

Supply and fixing of 15mm Concealed Stop Cock cast copper alloy screwed down high pressure with capstan head handle screwed both ends or for unions etc . (Cat No PIS-10H Neptune series of Prayag or equivalent make as specified in CA)

Supply and fixing of 15 mm dia Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed all as specified and as directed.

Supply and fixing of 100mm (4") overhead shower ABS with brass Arm (225mm) & flange including fixing to steel pipe or union complete all as specified and as directed. (Cat No BS-73 Neptune series of Prayag or equivalent make as specified in CA)

Supply and Fixing of Glass Shelf 500 X125 mm with brass bracket etc complete all as specified and as directed (Make Cat no BEA-45 of Prayag of equlavent make of Cera)

Supply and Fixing of Soap dish chromium plated brass all as per Cat Part No BA-45 of Prayag or equivlaent makes fixed in wall as per manufacturers instruction.

Supply and Fixing of mirror 600x450 x 5-6mm thick with frame cat No BLM-01F of PRAYAG or equivalent make complete all as specified and directed

Supply and Fixing of PVC Mirror cabinet of size 400x500 mm (Cat No 554 of Prayag or equivalent make) complete all as specified and as directed.

Supply and Fixing of Towel rail stainless steel glossy finish complete all as specified and as directed. (Cat No-BA10S of prayag or equivalent make as specified in CA)

Supply and Fixing of towel rack Brass glossy finish complete all as specified and directed. (Cat No BA-03 of Prayag or equivalent make as specified in CA)

Supply and Fixing of Towel ring Brass glossy finish complete all as specified and directed. (Cat No BA-02 of Prayag or equivalent make as specified in CA)

Supply and Fixing of Peg set of six (Cat No BEA 30 of Prayag or equivalent make of CA) fixed in wall as per manufacturers instruction etc complete all as specified and as directed .

Supply and Fixing of Unbreakable (Square) wall mounted shelf 500mm (Cat No BEA-47A of Prayag or equivalent make as specified in CA) complete all as specified and directed.

Supply and Fixing of Unbreakable corner shelf (3Pcs set i.e 8"-1, 10"-1 & 12"-1) (Cat No BEA-44A of Prayag or equivalent make as specified in CA) complete all as specified and directed

Supply and fixing of Toilet paper holder (Cat No BA-88 of Prayag or equivalent make of CA) fixed in wall as per manufacturer’s instructions all as specified and as directed.

Supply and Fixing of 75mm dia PVC(SWR) multi floor trap, plain with grating including jointing with solvent cement all as specified and as directed.

Supply and fixing of PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement etc complete all as specified and as directed.

Supply and fixing of 110mm PVC, SWR pipes, single socketed in any length with rubber ring joint leaid in trenches or in floor complete all as specified and directed.

Ditto- all as per item No 1.102 above but 75mm bore pipe complete all as specified and directed.

Supply and fixing of 110mm PVC, SWR pipes, single socketed in any length with rubber rings joint fixed with wall with GI clamp etc complete all as specified and directed

Ditto- all as per item No 1.104 above but 75 bore pipe complete all as specified and directed.

Supply and fixing of 110 mm dia PVC (SWR) bends (any radius) etc complete all as specified and as directed.

Supply and fixing of 75mm PVC (SWR) bends (any radius) etc complete all as specified and as directed

Supply and Fixing of 75 mm dia bore PVC (SWR) vent cowls

Supply and Fixing of PVC vent cowls of 110mm dia etc complete all as specified and as directed

Supply and Fixing of 200mm dia bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints laid in trenches or in floors et complete all as specified and directed

Supply and Fixing of 150mm dia bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints laid in trenches or in floors et complete all as specified and directed

Material and Labour for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

All as per item No 1.112 above, but 200 mm bore of pipe

Material and Labour for PCC 1:2:4 type B-0, with using 12.50 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

Material and labour for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

Material and Labour for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 200mm internal dia of pipe complete all as specified and directed.

Material and Labour for Precast cement concrete 1:2:4 type B1, using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and directed.

Supply and Fixing of stainless steel decorative curtain rod of 25 mm bore with wood finishes (weight not less 400 gms per running meter) including fancy finale caps cap (02 nos in each curtain rod) etc complete all as specified and as directed

Supply and Fixing of Brass Chromium Plated designer Bracket for curtain rod of dia 25 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long etc complete all as specified and as directed

Supply and Fixing of 18mm thick, PVC sheet one side prelaminated of approved texture, Celuca ply of Rajshree or equivalent as approved by GE Cub Board shutter with shelves and partitions including necessary fittings and fixtures etc complete all as specified and as directed.

Supply and Fixing of Stainless steel channel sizes 600mm long and 46mm wide all as specified and directed

Supply and Fixing of Stainless steel auto closing concealed hinges 9.5 cranks for half overlay doors with opening angle 95* (14-32mm) with integrated overlay adjustment + 2.50mm & depth adjustment 4mm complete all as specified.

Supply and Fixing of 125 mm size powder coated Stainless steel handle fit to modular section etc complete all as specified and as directed

Material and Labour for preparing newly plastered surface of ceiling and applying three coat of white wash etc complete all as specified and as directed

Material and Labour for preparing newly plastered surface of wall and applying three coat of white wash etc complete all as specified and as directed

Material and Labour for preparation of newly plastered surfaces on wall and applying two coat of oil bound distemper white or tinted over a coat of primer over 1mm thick putty complete all as specified and directed .

Ditto all as per item No 1.126 above but on untreated plastered surfaces of ceiling surfaces all as specified and as directed.

Material and Labour for preparing newly plastered surface of wall and applying two coat of cement base paint over a coat of white wash etc complete all as specified and as directed.

Material and Labour for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed .

Material and labour for Preparing old or previously untreated Plastered / concrete surface of wall with complete removal of grass, algae, roots of any other foreign material of any description including brooming down with steel wire brushing scrapping down smoke soot's ,moulds, moss and efflorescence, salts, trading oil and greasy spots etc and Applying two or more coats of 100% premium acrylic emulsion paint (Apex Ultima) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm including filling the cracks etc with crack filling material as per manufacturer’s instructions complete all as specified and as directed.

Demolition of cement concrete (Unreinforced) and paving not exceeding 15 cm thick (below or above ground level) etc complete all as specified and as directed.

Demolition of Reinforced cement concrete, (Reinforcement cut as required to facilitate demolition) (below or above ground level) etc complete all as specified and as directed.

Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc.(Laid bedded and pointed in any cement mortar) etc complete all as specified and as directed .

Dismantling of Asbestos cement corrugated, semi corrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Demolition of brick work /stone masonry/PCC block masonry built in cement mortar of any description and in any position including wall tiles etc all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutter from frames) (door and window) not exceeding 1.5 sqm each etc complete all as specified and as directed

Taking down chowkhats or frames with shutters (without taking off shutter from frames) (door and window) exceeding 1.5 Sqm but not exceeding 4 Sqm each etc complete all as specified and as directed

Demolition of Cement Concrete (Un-reinforced) of any description and in any position not otherwise specifically provided for including floor tiles including removing the debries to distance exceeding 500 metre but not exceeding 5.0KM etc complete all as specified and as directed

Wiring complete with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and including non-metallic rigid PVC conduit medium grade ISI marked including accessories including GI/ MS branded sunken boxes of suitable modular concealed on walls including modular frame and cover of suitable module fixed with cadmium plated iron screws for housing modular type switches, switch socket outlets, fan regulators etc., including provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed for the following :- (a) One light point controlled by one switch

(b) One fan/exhaust point controlled by one switch/regulator

(c) One 3 pin socket out let 5 Amps on independent board

(d) one 3 pin socket out let 5 A on same board

(e) One bell/buzzer point controlled by bell push

Wiring complete with 2.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and including non-metallic rigid PVC conduit medium grade ISI marked including accessories concealed wiring including GI/ MS branded sunken boxes of suitable modular concealed on walls including modular frame and cover of suitable module fixed with cadmium plated iron screws for housing modular type switches, switch socket outlets, fan regulators etc., including provision of 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed. Note for Item No 2.01 to 2.06 :- (i) The earth wire for the points in the same circuit can be looped from point to point. (ii)Earth wire shall be taken inside the conduit (iii) Cost of terminal box is deemed to be including guided in the item rate quoted for point wiring. (iv) Cost of a circuit of any length of cable from DB to any switch/ socket board to be including in point wiring.

Supply and fixing of LED batten suitable for indoor applications 20 Watts, 4 feet with extruded aluminium housing & integrated LED channel rectangular white acrylic cover complete with all accessories all as specified and directed. Make: Bajaj, Cat No.BCLAB 20 WH LED P or equivalent Makes & model

Supply and fixing of LED batten suitable for indoor applications 10 Watts, 2 feet with polycarbonate housing & integrated LED channel rectangular white acrylic cover complete with all accessories all as specified and directed. Make: Bajaj, Cat No.BCLSB 10 WH or equivalent Makes & model

Supply and fixing of 1 x 1 Surface mounted LED Luminaries 24 Watts white powder coated CRCA housing with LEDs seamless front frame with flat white high transmission acrylic cover complete with all accessories as specified and directed. Make: Bajaj, Cat No : BZSSQL 24W LED WHI or equivalent

Supply and Fix Bedside LED luminaries 03/5 watt all as specified and directed.

Supply and Fixing of Modular switch 1 way 6A,1 module all as specified and directed.

Supply and Fixing of Modular switch 1 way 16A, 1 module

Supply and Fixing of modular Socket, 6A - 2/3 pin combined 2 module all as specified and directed.

Supply and Fixing of modular Socket 6A/16A - 2/3 pin combined 2 module, all as specified and directed.

Supply and Fixing of Modular Bell push 6A 1 module

Supply and Fixing of modular type Fan step regulator, 120W - 2 module all as specified and directed.

Supply and Fixing of MCB SPN 240 volts 40 Amps complete all as specified and as directed

Supply and Fixing of MCB single pole 240 volts 6 to 32 Amps complete all as specified and as directed.

Supply and Fixing of MCB TPN 415 volts 63 Amps complete all as specified and as directed

Supply and Fixing of MCB DB SPN 8 way double door type 240 volts with 200 Amps rated busbar as specified and as directed.

Supply and Fixing of MCB DB SPN 4way double door type 240 volts with 200 Amps rated busbar as specified and as directed.

Supply and Fixing of MCB DB TPN 4 way with double door type 415 volts with 200 Amps rated busbar for housing MCBs all as specified and directed.

Supply and Fixing of ceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals all as specified and as directed.

Supply and Fixing of Ding Dong bell AC 230 volts single pole all as specified and directed.

Material and Labour for provision of new sub main wiring 1100 volts grade multistranded FRLS copper conductors, two runs of single core 6 Sqmm along with 6 Sqm PVC insulated single core multistranded copper conductor cable as earth continuity conductor run along with PVC conduit all as specified and as directed. Note: 3 runs of cable and 1 run of conduit will be measuredas unit length.

Material and Labour for provision of new sub main wiring 1100 volts grade multistranded FRLS copper conductors, two runs of single core 4 Sqmm along with 4 Sqm PVC insulated single core multistranded copper conductor cable as earth continuity conductor run along with PVC conduit all as specified and as directed

Material and Labour for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 meter below ground level with top edge of earth plate at a depth not less than 1.5 meter connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 meter long by means of nuts, bolts, thimbles, check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion including earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways including funnel with watering pipe wire mesh and lugs, including test point complete all as specified and as directed.

Supply and fixing of 30 W LED bldg security light fitting with pressure die cast housing along with prismatic polycarbonate diffuser with IP 66 protection. Make:- Bajaj, Cat No.:- ENXT P 30L WH SY PC SD or Equivalent Makes & model

Supply and fixing of Bracket made out of GI tubing medium grade 25 mm bore, approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm , nuts, bolts, washers etc and including before fixing applying two coats of aluminum paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing of Single pole & neutral enclosure 20 Amps & 240 V with two pin and earth plug and socket complete with one single pole MCB 20Amps

Supply and fixing of ceiling fans complete with complete accessories, 230V, SP 1200 mm Sweep with BEE 3 Star rating complete with all accessories and fixing the fan from ceiling rose with 3 core flexible copper wire 24/0.20 sqmm, etc all as specified and as directed. Make Bajaj, SABSE TEZZ EE 03. Model No 251119 and equivalent of Havells/CG/ USHA.

Supply and fixing of Storage type water heater 25 Ltrs BEE 5 star rated complete including steel wired pipe for hot/cold water connection for inlet and out let water etc complete all as specified and directed at site. (Bajaj / Venus / Havells)

Supply and fixing of Exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louvers fixed outside with all accessories and fixing the exhaust fan from ceiling rose with 3 core flexible copper wire 24/0.20 sqmm , etc all as directed. Make : Bajaj cat No : 70079, MAXX AIR or eqv in Make Havells/CGs/ Orient

Material and Labour for sand cushioning with a layer of river sand 23 cm thick under and above the cable complete

Supply and fixing of sub class burnt bricks for cable protection complete all as specified and as directed.

Supply and fixing of XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 16 Sqmm, 4 core laid in trenches/wall all as specified and as directed.

Supply and fixing of XLPE insulated, screened, PVC bedded, galvanized steen strip or wire armoured power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 10 Sqmm, 2 core laid in trenches/wall all as specified and as directed.

Supply and fixing of GI tubing light grade 40 mm bore with all fitting laid in trenches/walls/Roads for cable protection all as specified and as directed.

Supply and fixing of GI tubing light grade 25 mm bore with all fitting laid in trenches/walls/Roads for cable protection all as specified and as directed.

Supply and fixing of GI tubing light grade 20 mm bore with all fitting laid in trenches/walls/Roads for cable protection all as specified and as directed.

S L R Construction

M/S POTHIRAJ AND CO