Erode District_Nerinjipettai TP_MLA FUND_2024-2025

Amount

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.

Supplying and filling the foundation and basement with gravel in layers of not more than 15cms thick, well rammed, watered and consolidated etc. complete complying with standard specification as directed by the departmental officers -

Supplying and filling the foundation and basement with M Sand in layers of not more than 15cms thick, well rammed, watered and consolidated etc. complete complying with standard specification as directed by the departmental officers

Cement concrete 1:4:8 (one of cement five of sand and ten of aggregate) using 40mm size hard broken granite stone jelly for flooring including well rammed and rendering the top surface rough to receive the floor finish, curing etc. complete complying with standard specifications. The rate is inclusive of necessary planking for panelling into bays wherever necessary and as directed by the departmental officers. (Note that the Cement concrete shall be laid in Bay by Bay)

Brick work in following Cement Mortar using best quality of Country Bricks of size 8-3/4" x 4-1/4" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specifiction.

Supplying and erecting, centering for sides and soffits including necessary supports and strutting up to 3.30m height for the following surfaces as detailed below in all floors with all cross bracings using mild steel sheets of size.90cm.x 60cm and 10 B.G stiffened with mild steel angles of size 25mm x 25mm x 3mm for boarding, laid over silver oak (country wood) joists of size 10cm x 6.5cm. spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centres complete complying with standard specification (The payment for centering shall be given after the concrete is laid.) The retrieved materials should be taken back by the contractor. Grade Beam

Columns

Reinforced Cement Concrete 1:1.5:3 using 20 mm ISS HBG metal for all RCC item of works excluding cost of reinforcement and fabricating charges, centering and shuttering but icluding curing and providing fixtures like fan clamps in the RCC floor or roof vibrators, finishing, curing etc. complete and also fixing fixtures like fan clamps in the RCC floor / roof slab wherever necessary and the bearing surfaces of walls, beams shall be plastered with cement mortar 1:3 (one cement and three sand) and kraft paper laid etc.complete complying with standard specifications and as directed by the departmental officers. Below Bacement

Columns

Supplying, fabricating and placing in position of mild steel or ribbed tor steel grills for all RCC works as per the design given including cost of steel and binding wire in all floors etc.complete complying with standard specifications.

Plastering the surface of walls with cement mortar 1:5 (one of cement and six of sand) 12mm thick in all floors Finishing smooth, scaffolding, curing etc., complete complying with standard specification as directed by the departmental officers.

Paving the floor with double charged vetrified tiles of approved size, colour and company laid in cement morter 1:3 [one cement and three M sand] 20mm. Thick and pointing with colour cement to suit the colour of the tiles including finishing the joints neatly complying with standard specification and as directed. for 10m2

Supplying and fixing up of M S steel fabrication for PPGI sheet roofing as directed

Painting the newly plastered wall surfaces with two coats of exterior emulsion over one coat of primer

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light/ fan points ( 5 points per coil ) SD. 25

Supplying and fixing up of 18W 3000K recessed LED light fitting

M S GURUSAMY (BID ID -1274743)