Renovation of Crew rest room in Valparai Branch

Labour charge for chipping of floor finish in cement mortor etc complete.

Labour charge for chipping of wall in cement mortor etc complete.

Supplying and fixing in position best white glazed earthenware Oriya type INDIAN WATER CLOSET of approved quality (Nayayasis make) of size 584mm with 'P' or 'S' trap and embedding the closet with trap to floor in position with 40mm brick jelly complete 1:2:5 (One part, two sand and five brick jelly) and finishing the top to the required slope and including giving connection to the S/L soil pipe(s) by dismantling the masonry floor or RCC works and restoring the same to the original condition without anyleakage etc. complete as directed by the departmental officers.

PLASTERING with cement mortar 1:5 (one cement and five sand)12mm thick in all floors including curing complying with standard specifications

DADOING THE WALLS with colour glazed ceramic tiles of size 3004509mm of best approved quality in cement mortar 1:2 (One cement and two sand) and pointing with white cement evenly to full depth of tiles in all floors as directed by the departmental officers and complying with standard specification

REFLOORING with Joint free rectified glazed CERAMIC TILES (colour with design) of approved quality and colour of size 305x305x8mm in all floor over 20mm thick cement mortor 1:3 (one cement, three sand) base above the existing bed concrete and pointing with same colour cement added with colouring pigment etc., complete complying standard specification.

Supplying and fixing soild PVC door Shutter using 19 gauge 19 mm MS Square tubes for styles and outer frames. 15 mm MS square tubes for top, lock and bottom rails. The Steel tubes shall be covered with 5 mm Thick solid pvc sheets. Shutter using 5mm Thick solid PVC Sheet for panelling shall rigidly fixed in position including necessary furniture and fittings. The Over all size of styles shall be 50 mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75 mm x30 mm. The Over all size of frames shall be 50 mm x 45 mm with suitable rabate for housing the shutter

FLOORING with Double charged nano VERIFIED TILES of approved quality and colour of size 600X600X8 mm in all floors over 20mm thick cement mortar 1:3 (one cement and three sand) base above the existing bed concrete and pointing with same colour cement added with colouring pigments complete complying with 13 standard specification.

Supplying PAINTING TWO Coats in the best approved first quality of plastic emulsion paint in the wall over one primary coat of wall primer including cost of paint and other materials, brushes, scaffolding charges etc., including clearing the existing surface by manual labour etc., complete complying as directed by the departmental officers as per standard spefication

Removing the one course of pressed tiles laying with base cement mortor in RCC roof finish and dismantled material conveyed by head load to outside as directed by the corporation officers.