Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹36.9 L
EMD Value
₹73,800
Closing Date
19 Jun 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Construction of Common Recreation Room above Terrace of Existing Gym and TT Room at Senior Officers Enclave, HAL Bangalore Including Electrical Works.
7169
TENDER NOTICE/NCP/02/24-25/03
Works
Contract Section Civil-FMD-Bangalore
₹0
₹73,800
19 Jun 2024
30 Apr 2024
30 Apr 2024
19 Jun 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
PAN No.:
Service Tax Registration No
Goods and Service Tax ID No.
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Registered Contractor
Average annual financial turn over during the last 3 years, ending 31st March 2023 of the previous financial year [ should not be less than 30% of Amount put to tender]
TURN OVER IN Rs.
Pls Enter Turn over in Rupees for all the 3 years
ESI & PF Nos with proof
Remarks if any
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
DECLARATION II
Pls Accept the Delaration II
Specification
Removing / transporting the surplus excavated earth including debris, vegetation waste etc., to a distance upto 5000m/ outside HAL premises/ to contractor's own yard including loading, unloading, depositing, spreading, levelling, etc., all complete as directed by Engineer-in-charge.
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas in all kinds of soft / hard soil for foundations, footings, column pedestals or members as per the drawing etc., (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including removal of vegetation and in-equalities, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, levelling, ramming the bottom of excavation, getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m with all labour, tools & tackles, plant & machinery, hire & fuel charges, etc., all complete as directed by Engineer-in-charge.
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains, pipes, cables etc. in all kinds of soils (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m with all labour, tools & tackles, plant & machinery, hire & fuel charges etc., all complete as directed by Engineer-in-charge.
Returning / filling in with useful excavated soil (excluding rock), free from salts, organic or other deleterious matter (Other than black cotton soil & rock etc., in trenches, plinth,sides of foundations etc., spreading in layers not exceeding 20 cm thick, watering, breaking / removing clods exceeding 50 mm, ramming and consolidation of each deposited layer etc., with all labour, tools & tackles, plant & machinery, etc., lead upto 50 m and for all lifts, etc., all complete as directed by the Engineer-in-Charge.
Supplying, mixing and placing plain cement concrete (1:4:8) (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate) of required thickness using 40 mm down graded hard stone/granite aggregate in accordance with IS 456 in foundations, mass concrete, sub bases and other similar works including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions etc., but excluding the cost of centering, shuttering and finishing, all complete as directed by the Engineer-in-Charge.
Providing and laying 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) cement concrete in retaining walls, return walls,walls (any thickness) including attached pilasters, columns, piers,abutments, pillars, posts, struts, buttresses, string or lacing courses,parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor etc., up to floor five level, excluding the cost of centering,shuttering and finishing all as per instructions of Engineer In-charge.
Supplying, mixing and placing plain cement concrete (1:2:4) (1 Cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate) of required thickness using 20 mm nominal size down graded hard stone/granite aggregate in accordance with IS 456 in Cills, fillets, coping,etc upto floor five level, including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions etc., but excluding the cost of centering, shuttering and finishing, all complete as directed by the Engineer-in-Charge.
Providing and fixing up to floor five level precast cement concrete solid block of 200mm/100mm with ordinary mix ratio of 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) for walls at all levels, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand) and along with necessary formwork, curing, finishing, making or leaving holes & chases and making good etc., all complete as directed by the Engineer-in-Charge.
Formwork (Centering and shuttering including strutting, propping etc, and removal of form) for the following RCC members which are defined as below, in fair finished by providing timber, wooden planks, runners / M.S. sheets with all supports, struts, braces, wedges, scaffolds, bracings, ladders, gangways, dressing with oil including M.S. bolts nuts and washers, temporary openings, filleting for a stop, chamfered edges, internal / external splayed, rounded angles or grooves for forming throating including making temporary openings in the forms for pouring concrete etc., all complete as directed by the Engineer-in-Charge for the sub-items mentioned below. Note: Formwork material is contractor's own property and shall be removed after completion of work.
Foundations, footings, bases of columns, etc. for mass concrete
For Roofs, landings, Slabs supported on walls, roof landings, balconies, access platforms, canopies, decks etc.
Plinth beams, Lintels, Beams, etc
For Columns, Pillars, Piers, etc
Stairs, (excluding landings)
Chajja, Corbels etc,including edges
Supplying, straightening, fabricating (cutting & bending), placing in position and binding steel reinforcement of TMT bars of not less than Fe 500 D conforming to IS 1786 for all concrete reinforcment members / works above/below plinth level, including cutting to length, bending to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with mild steel wire (Annealed) not less than 0.9 mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it etc., complete all as per specifications, drawings and as directed by the Engineer-in-Charge. Note: a) Only authorized laps, chairs etc. shall be considered for measurement. b) The exposed Reinforcement bars shall be coated with cement slurry.
Providing and laying in position ready mixed or site batched M25 Grade with minimum cement content of 330 kg/m3 design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, PortlandPozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, consolidation, levelling, curing, scaffolding, all materials, labour, carriage for all leads & lifts; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge. Note: (i) Mix design to be obtained from Govt. / NABL laboratory for site batching concrete.
All works upto plinth level like footing,pedetsal,piles,plinth beam,including necessary openings and packing if any for laying pipes, cables etc.
All works above plinth level column,beams,slabs,canopy,chajja,stairscase etc. level including necessary openings and packing if any for laying pipes, cables etc.
Brick work with common burnt clay machine moulded modular bricks of class designation 12.5 in exposed brick work(200mm/100mm) thick above plinth level including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand), etc., all complete as directed by Engineer-in-Charge.
Providing and fixing expansion hold fasteners with threaded dia of 6mm on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc all complete as per the architectural drawings and the directions of engineer-in-charge .
Providing and fixing Ceramic glazed wall tiles/Vitrified tiles/Anti skid/ Matt finished conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and set & jointing with neat grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete , including machine cutting, curing etc., all complete as directed by the Engineer-in-Charge. Note : Quoted rate shall be inclusive of screed, pointing, etc., all complete as directed by Engineer-in-Charge.
Supplying, fabricating and fixing second class teak wooden plain, solid, straight chowkats and frames of doors ,windows and other frames, wrought framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints and fixed to wall or in position with hold fast lugs or with dash fasteners of required dia & length etc., all complete as directed by the Engineer-in-Charge. Note: The timber in contact with masonry shall be treated with anti-termite paint. Hold fast lugs or dash fastener shall be paid separately.
Providing and fixing Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading to the windows, ventilators,etc all complete as per the architectural drawings and the directions of engineer-in-charge .
Providing, fabricating and fixing 35mm thick flush door shutters for main entrance conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood & lipping with 2nd class teak wood battens 25 mm minimum depth on all edges and well matched commercial 3ply veneering with vertical grains or cross bands including ISI marked Stainless Steel butt hinges with necessary screws and face veneers on both faces of shutters and provision of rebates,suitable blocks for taking mortice locks, latches or other fittings, fitting to frames/chowkats etc., all complete as directed by the Engineer-in-Charge. Note :Fittings / hardware shall be paid separately.
Providing and fixing M.S. grills of required pattern in openings/ wooden frames of windows, Ventilators etc. with rawl plugs screws, ends of bars shouldered and/or riveted, welded etc., of approved design using MS structurals such as flats, angles, round/square bars etc., including necessary cutting, welding, embedding in concrete, masonry etc.,including priming coat with approved steel primer all complete as directed by the Engineer-in-Charge.
Supplying and fixing the 40x5 mm flat iron hold fast 40 cm long of approved make and design to door with all required screws, bolts, nuts, washers etc including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) all complete as directed by the Engineer-in-Charge.
Supplying and fixing the Polished (bright finished) brass barrel type tower bolts 250 mm long X 10 mm with barrel of extruded sections of brass, of approved make and rolled or drawn brass bolt, design to door with all required screws, bolts, nuts, washers etc., conforming to IS 204 (Part 2) all complete as directed by the Engineer-in-Charge.
Providing and fixing bright finished brass handles of 125mm size with screws, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing bright finished brass mortice latch and lock of minimum 6 levers, vertical type, and a pair of 100mm lever brass handles of approved quality, polished bright of approved manufacture to door with all necessary screws, bolts, nuts and washers of approved manufacture, etc., all complete as directed by Engineer-In-Charge.
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete as directed by Engineer-In-Charge.
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete as directed by Engineer-In-Charge.
Providing and fixing aluminium sliding door bolts (Aldrop) 250 mm long X 16mm, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc.all complete as directed by Engineer-In-Charge.
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame, all complete as directed by the Engineer-in-Charge.
Providing and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels, including provision of internal wood lipping, rebates, suitable blocks for taking mortice locks, latches or other fittings, fitting to frames/chowkats etc., conforming to IS: 14856, all complete as directed by the Engineer-in-Charge.
Providing and fixing zinc alloyed (white powder coated) Touch lock for UPVC/Aluminium sliding window with necessary screws etc. all complete as per the architectural drawings and the directions of engineer-in-charge .
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.all as per the Instructions of the Engineer In-charge.
Providing and fixing in position Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position,embeded in concrete,masonary etc, and applying a priming coat of approved steel primer all complete as per the instructions of Engineer In-charge.
Supplying, mixing, laying (average) 40 mm thick plain cement concrete flooring (1:2:4) using 20 mm nominal size graded aggregates in sub bases, floors and pavings etc., finished with a floating coat of neat cement, including cement slurry, including consolidation, necessary formwork, curing, materials, labours, tools and tackels, plants etc.,but excluding the cost of nosing of steps etc, all complete as per specifications and as directed by the Engineer-in-Charge.
Providing and laying Double Charged vitrified floor tiles polished finish size of tile Size of 600 X 600 mm or nearest available size in floors over a screed of cement mortar (1:4) 20 mm thick for Paper Joint ( Thickness to be specified by the manufacturer) with water absorption less than 0.08% and confirming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement: 4 course sand), including grouting the joints with grey cement slurry @ 3.3 Kg/Sqm including grouting the joints with white cement and matching pigments etc. all, complete as directed by he Engineer in charge.
Providing and laying Glazed vitrified tiles Matt/ Anti skid polished finish size in floors as indicated below for Paper Joint of tile size of 600 X 600 mm ( Thickness to be specified by the manufacturer) with water absorption less than 0.08% and confirming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement: 4 course sand), including grouting the joints with grey cement slurry @ 3.3 Kg/Sqm including grouting the joints with white cement and matching igments etc. all, complete as directed by he Engineer in charge. Note: Quoted rate shall be inclusive of screed, pointing etc.
Providing and laying Vitrified tiles in Skirting over a screed of cement mortar (1:3) -Size of Tile 600x600 mm or nearest size available (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. all, complete as directed by he Engineer in charge.
Providing and laying flamed finish Granite stone of Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent colour flooring in required design and patterns, for flooring and steps including threads & risers in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing, round nosing etc. all complete as specified and as directed by the Engineer-in-Charge.
Providing, fixing, testing and commissioning single socketed pipes of 110mm dia, on wall face unplasticised Rigid PVC rain water pipes of 6 kg/cm² SWR grade and of approved make conforming to IS : 13592 Type A, including jointing together with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion and all necessary fittings & specials, bends, branches, sockets, clamps, pipe cutting and wastages, cutting and making good the walls, connecting to existing lines etc., all complete as directed by the Engineer-in-Charge.
Providing & fixing Mangalore tile (clay tiles in two layer) with bottom flat layer with approved design for ceiling & top layer with corrugated tile of 20 mm thickness or with available size and pattern, on steel frame work complete and making it water proof as per site requirement (steel frame work to be paid separately). all complete as directed by the Engineer-in-Charge.
Providing and fixing on wall/floor unplasticised Rigid PVC pipes of 75mm dia conforming to IS : 13592 Type A, including jointing with seal ring (Single socketed pipes.)conforming to IS : 5382,all complete as directed by the Engineer-in-Charge.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of 110mm dia conforming to IS : 13592 Type A, including jointing with seal ring (Single socketed pipes.)conforming to IS : 5382, all complete as directed by the Engineer-in-Charge.
Providing, applying and laying 12 mm thick cement plaster work in for internal/ External areas of Ceilings, Chajjas etc in CM(1:4) including forming grooves n.exc 10mm wide and n.exc 10mm deep as per requirement as directed including preparation of surface by hacking etc., at all levels with necesary materials, labour, scaffoldings, curing, tools and tackles, plants etc., threading if any as directed, all complete as directed by the Engineer-in-Charge.
Providing, applying and laying cement mortar (1:6) plastering 15 mm thick on brick/solid blocks/concrete surfaces, finished even and smooth with trowel for Internal/External walls etc., including supply and fixing of hexagonal chicken mesh minimum 150 mm wide having opening 20 mm x 20 mm of 26 gauge at juncitons of concrete & brick work or between different material, including making grooves as per the requirement n.exc 10mm width and n.exc 10mm deep with necesary materials, labour, scaffolding, curing, tools and tackles etc., at all heights, all complete as directed by the Engineer-in-Charge.
Providing, applying and laying 18 mm thick cement plaster work in two coats for external areas as directed. First coat 12 mm thick in cement mortar (1:5) made rough to recieve top coat, second coat 6 mm thick in cement mortar (1:6) , final surface finished with a floating coat of neat cement after necessary preparation of surface, at all levels including supply and fixing of hexagonal chicken mesh minimum 150 mm wide having opening 20 mm x 20 mm of 26 gauge at juncitons of concrete & brick work or between different material, with necesary materials, labour, scaffoldings, curing, tools and tackles, plants etc., threading if any as directed, all complete as directed by the Engineer-in-Charge.
Painting newly plastered external surfaces with two or more coats applied at 1.43 litre/10 sqm/ as per manufacturer specifications of 100% premium acrylic emulsion paint having VOC less than 50 grams/ litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint with silicon additives of approved make, colour, shade, tint & pattern at all levels, over and including a coat of approved acrylic primer including preparing the surface by removing loose dirt and any organic growth, filling of cracks, necessary scaffolding etc., all complete as directed by the Engineer-in-Charge. Note: The paint shall have anti-algal, anti-fungal, UV resistant & anti-tarnishing qualities with 100% acrylic base and silicon or elastomeric additives.
Painting Wooden surfaces of any description with two coats of synthetic enamel paint conforming to IS 2932, of approved colour and manufacture over a coat of primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content,with ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre including preparation of surface by rubbing with fine grade of abrasive paper to ensure smooth and even surface, applying knifing paste filler putty before painting the first coat etc., all complete as directed by the Engineer-in-Charge.
Painting Steel surfaces of any description with two coats of synthetic enamel paint of approved colour,brand and manufacture to give an even shade, including preparation of surface by rubbing with fine grade of abrasive paper to ensure smooth etc., all complete as directed by the Engineer-in-Charge.
Painting newly plastered interior surfaces with two coats of premium acrylic emulsion paint of interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ litre conforming to IS 15489, of approved make, brand, colour, shade, tint, manufacture & pattern at all levels, including preparing the surface by removing loose dirt and any organic growth, smoothening the surface by using suitable emery paper, filling crevices and finishing even and smooth by providing and applying white cement based putty of average thickness of 1mm in 2 coats of approved brand and manufacture over the plastered wall surface and followed by the applying priming coat with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With water thinnable cement primer on applied putty having VOC content less than 50 grams/litre, necessary scaffolding etc., all complete as directed by the Engineer-in-Charge.
Demolition of reinforced cement concrete work of any description and in any position manually/ by mechanical means using pneumatic tools, breaking to pieces of any thickness or volume, if necessary and stacking servicable and unservicable materials seperately and disposal of demolished/ rubbish/ unserviceable/ dismantled or waste material (Except saleable materials) by mechanical transport outside HAL upto a total lead of 10.05 kms for all lifts, all complete as directed by the Engineer-in-Charge.
Demolition of existing brick masonry work, built in cement mortar in floor & wall manually/ by mechanical means of any description at any height and position with requried scaffolding etc., including stacking of serviceable material and disposal of demolished/ unserviceable material (Except saleable materials) outside HAL for a lead upto 10.05 kms for all lifts, all complete as directed by the Engineer-in-Charge.
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. all complete as directed by the Engineer-in-Charge.
Providing and fixing, testing and commissioning 8 mm dia C.P. / S.S. Jet ( health faucet ) with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved with necessary fittings, all complete as directed by the Engineer-in-Charge.
Providing and fixing of C.P brass toilet paper holder of standard size on wall face with concealed fittings arrangement of approved quality and colour,weighing not less than 88 gms, all complete as specified and directed by EIC.
Providing and fixing 600x450 mm beveled edge mirror of min. 4mm thick superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers etc., all complete as directed by the Engineer-in-Charge.
Providing and fixing White Vitreous China Wash basin of size 630x450 mm or nearest available size of approved make with a pair of 15 mm C.P. brass pillar tap of approved model & make, C.I. brackets, 32 mm C.P. brass waste fitting, 32 mm dia semi-rigid PVC waste pipe, including painting of fittings and brackets, cutting and making good the walls, connecting to floor trap and with all necessary fittings and accessories etc. wherever require all complete as directed by the Engineer-in-Charge.
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, all complete as directed by the Engineer-in-Charge.
Providing, fixing, testing and commissioning Cast iron/ S.S type trap ( floor trap ) of available size and approved make with 100 mm inlet and 75 mm outlet of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors , connection with PVC soil / waste pipe, necessary 150 mm thick cement concrete (1:2:4) for embedding the trap,etc.,all complete as directed by the Engineer-in-Charge.
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required,all complete as directed by the Engineer-in-Charge.
Providing and fixing of ball valve (brass) 25 mm nominal bore dia, of approved quality, High or low pressure, with plastic floats, screwed for iron pipe or brass ferrule and fixed,including necessary fittings i.e flynut, etc., all complete as directed by the Engineer-in-Charge.
Providing and placing in position at terrace 1000Litre capacity polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes.
Supplying, jointing, testing and commissioning, approved make GM body gate valves with C.I wheel and screwed ends etc. complete all as directed by the Engineer-in-Charge.
Providing and fixing C.P. brass bib cock of 15mm nominal bore dia and approved quality conforming to IS:8931, all complete as directed by the Engineer-in-Charge.
Providing and fixing Concealed Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing, necessary reducers, tank adaptors etc. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints and making good the walls etc. complete as per direction of Engineer in Charge.
15 mm dia
20 mm dia
25 mm dia
32 mm dia
Providing and fixing 40mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements etc..all as per the instrcution of Engineer Incharge.
Making connection of drain or sewer line (For pipes of 100 to 250 mm diameter) with existing manhole including breaking/cutting into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) cement plastered on both sides with C.M 1:3 ( 1 cement : 3 caorse sand ), finished with a floating coat of neat cement and making necessary channels for the drain etc all complete as directed by the Engineer-in-Charge.
Constructing brick masonry manhole with Sewer bricks conforming to IS : 4885 in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size of 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455 X 610 mm internal diameter, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg) , all complete as per the directions of Engineer in Charge.
Constructing brick masonry chamber of inside dimensions 455 x 610 mm and 45 cm deep (for single pipe line) for underground C.I. inspection chamber and bends with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design and directions of the Engineer in Charge.
Aluminium work for shutters of doors, windows/ventilators i.e Powder coated aluminium windows (minimum thickness of powder coating 50 micron) & ventilators in moving position including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately), all complete as per the architectural drawings and the directions of engineer-in-charge .
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) along with EPDM rubber / neoprene gasket etc. all complete as per the architectural drawings and the directions of engineer-in-charge .
Supplying and fixing of Galss Blocks of approved colour and shade of size 190mm X190mmX80/100 thick including necessary sealent, as per the approved design etc all completein the openings of Exposed Brick Work.All complete as per the instruction of Engineer In-charge.
Rupees Twenty Eight Lakh Eighty One Thousand Seven Hundred Thirty Three and Fifty Three Paise Only
Supply and fixing on existing wall / ceiling, testing & commissioning of surface mounting, LED light fittings (four feet) of wattage not exceeding 40W made out of white powder coated CRCA steel sheet housing comprising of special virgin grade opal acrylic diffuser including control gear. The luminaire should have Lumen efficacy ≥110 lm/watt and lumen output not less than 4400lumens with PF >0.95 and Colour temperature shall be ≥5700K, CRI >80, THD<10%, operating on single phase 240V voltage 50 Hz AC supply with voltage range 150-275V including necessary interconnections and other standard accessories complete in all respects and as directed by Engineer incharge, offered model shall of Bajaj BPCS 40W LED 4F D WH /equivalent model of other approved makes. LED used in the lighting fixtures should be one of the approved make. LM79 certification for luminaires & LM80 certificate for LED shall be produced.
Supply and fixing on existing wall testing & commissioning of wall mounting Down lighter LED luminaire, wattage not less than 20W LED lighting fixture antique brass finish with a unique petal-shaped glass, operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V, effficent heat sink, Colour temprature shall be >5600K, including control gear, power factor of control gear shall be >0.90. Philips make model no:582066 Lucidus Wall 1H down E27 /Equivalent model of approved make luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL.
Supply and fixing on ceiling testing & commissioning of round type Surface/recess mounted LED downlighter with PDC aluminium housing and high translucent frosted plastic diffucer makes it a robust luminaire, wattage not less than 18W LED lighting fixture, lumens efficiency ≥ 100lm/w at luminaire level, effficent heat sink, Colour temprature shall be ≥5700K, operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V. 79 certification for luminare & LM80 certificate for LED shall be produced. including control gear, power factor of control gear shall be >0.90. Crompton model no:LCDSPLN-S-18-CDL/Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL.
Supply & fixing on wall using suitable mounting arragements, fixing hardwares, testing and commissioning of 450mm dia, wall mounting, oscillating type fan along with speed regulator, power cord with 6A, 3 pin plug top and other connected accessories etc., including necessary interconnections complete in all respects and as directed by the Engineer-in-charge.
Supply, installation, testing & commissioning of 300mm dia 900 rpm heavy duty exhaust fan of any approved make with louvers, connecting cord with 6A, 3 pin plug top and with all necessary accessories, including making wall openings and replastering to smooth finish with matching paint etc., complete in all respects and as directed by Engineer-in-charge.
Supply, fixing, testing & commissioning of the following factory built powder coated Double door MCB DB of any approved make fabricated out of M.S. sheet steel enclosure & necessary cutouts for operating the MCB knobs & comprising of suitable rating tinned copper busbars & earthing bus with tapped holes including internal wiring with stranded copper PVC wires or suitable size copper strips etc. & fixing the DB in flush with wall/ on wall as per site requirement with necessary M.S. angle supports, chipping the wall and replastering to smooth finish etc., wherever required as per site condition, complete in all respects, as directed by Engineer-in-charge and comprising the following as detailed below:
4 way (4 + 12), Double door Horizontal MCB DB
Supply and fixing 32 A rating ,TPN, 415V, 10kA, "C" curve, miiniature circuit bracker suitable for inducive load of following poles in the exesting MCB DB complete with connections, testing and commessioning etc., as required.
Supply and fixing 6A to 32 A rating, SP 214V 10kA, "C" curve, miiniature circuit bracker suitable for inducive load of following poles in the exesting MCB DB complete with connections, testing and commessioning etc., as required.
Wiring for light point / fan point / exhaust fan point/call bell point from nearest switch box with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, fan regulator, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (as per detailed CPWD specifications for Group C wiring)
Wiring to single light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects.
Wiring to two light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects.
Wiring to exhaust/wall mounting fan point using 6A, 250V gr. flush type modular SP switch housed along with other lighting switches/separate switch box if required and 3pin 6A, 250V gr. modular type socket housed near the exhaust fan complete in all respects.
Wiring for circuit / submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required(Wiring from Distribution board to Switch box and Switch box to Switch box)
3 x 2.5 sq. mm
3 x 4 sq. mm(For 6A & 16A power points)
4 x 6 sq. mm+ 2x6sqmm earth (For Panel to DB)
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
6A Switch
16A Switch
3 pin 6A Socket outlet
6 pin 16A Socket outlet
Supplying and fixing of 3 Module Modular base & cover plate (coloured or white as decided by OIC/EIC) on existing modular metal boxes etc. as required.
Supplying and fixing of Modular GI box for 3 module size in flush with wall including cutting the wall and making good finish with same.
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
Earthing with G.I. earth pipe 4.5metre long, 40mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
Rupees Two Lakh Forty Five Thousand Two Hundred Sixty One and Fifty Four Paise Only
Rupees Thirty One Lakh Twenty Six Thousand Nine Hundred Ninety Five and Seven Paise Only
Approximate Amount Put to Tender
Rupees Five Lakh Sixty Two Thousand Eight Hundred Fifty Nine and Eleven Paise Only
Rupees Thirty Six Lakh Eighty Nine Thousand Eight Hundred Fifty Four and Eighteen Paise Only
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TN02.pdf
TENDER_DOCUMENT • 2.71 MB
04undertaking.pdf
TENDER_DOCUMENT • 0.55 MB
04Amd.pdf
TENDER_DOCUMENT • 0.52 MB
04Checklist.pdf
TENDER_DOCUMENT • 0.17 MB
04Electricaldrawing.pdf
TENDER_DOCUMENT • 0.08 MB
04PB.pdf
TENDER_DOCUMENT • 0.51 MB
04CivilDrawing.pdf
TENDER_DOCUMENT • 2.48 MB
04PQF.xlsm
TENDER_DOCUMENT • 0.03 MB
04PBF.xlsm
TENDER_DOCUMENT • 0.07 MB
04TB.pdf
TENDER_DOCUMENT • 3.31 MB
04PQ.pdf
TENDER_DOCUMENT • 0.22 MB
04ECSForm.pdf
TENDER_DOCUMENT • 0.46 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .