Construction of BT Road From Kali Mandir Chawak towards Darradhipa in ward -17

Earth work excavaton in foundation in hard soil or gravelly soil within 50 m initial lead and 1.50 mt initial lift including rough dressing and bracking clods to maximum 5 cm to 7 cm and laying in layers to exceeding 0.3 mt in depth and as per direction of the department.

Providing, spreading, filling in foundation and plinth with sand watered and rammed as per OPWD.specification including all cost of materials, labour, conveyance, royalty,Tools and Plants etc.all complete, required for the work to finished items of work

Cement concrete (1:4:8) with 40 mm size hand broken hard granite metal including all cost of materials, labour, conveyance, royalty, Tools and Plants water for curing etc.all complete,as per OPWD specification required for the work to finished items of work.

Cement concrete work of M15 grade with 20 mm and down grade crusher broken hard granite chips including hosting and laying all cost of materials, labour, conveyance, royalty, T & P, water for curing etc.all complete as per OPWD specification required for the work to finished items of work

Cement concrete work of M20 grade with 20 mm and down grade crusher broken hard granite chips including hosting and laying all cost of materials, labour, conveyance, royalty, T & P, water for curing etc.all complete as per OPWD specification required for the work to finished items of work

Requirement of HYSD / MS rod & labour for cutting, bending, binding, straighting and laying the grills and placing in position including cost of rod & binding weir 18 to 20 gauge

Rigid and smooth centering and shuttering for rCC works including false work and dismentalling then after casting including cost of materials complete in ground floor, RCC foundation, plinth band and footings bases of columns mass concrete pre-cast slabs etc

Transporting the excavated earth by mechanical means within 5.00 Km lead including initial lead and lift, loading & unloading etc all complete.

Filling in foundation and plinth with excavated materials including watering and ramming as directed by the EIC.

Scraping cleaning the road surface applying tack coat using 3.0Kg of bitumen for 10 Sqm and laying 37,5mm thick built up spray grouting in one layer using 0.45cum of 25mm to 40mm size hard granite metal and 12.00Kg penetration grade of bitumen for 10 Sqm with 0.12cum of 12mm size hard granite chips as key stone for 10 Sqm spreading over and laying including pouring and spreading over and spreading bitumen metal and chips and rolling with PRR including hire and running charges of PRR and all other machineries,cost and conveyance of materials but excluding cost and conveyance of bitumen, complete as per specification and direction of Engineer-in-Charge To be used for minor repair works only.

Cleaning the existing black topped surface with removal of foreign materials with brooms or soft brushes and finally dusting with old gunny bags and or compressed air to receive bituminous including cost and conveyance of materials T&P etc all complete.

Labour for applying tack coat including cost and conveyance of materials T&P ,cost of Bitumen etc al complete.

Providing and laying bituminous macadam with hot mix plant using crushed aggregates of Grading II (19 mm nominal size) premixed with bituminous binder of 60/70 penetration grade of bitumen,transported to site, laid over a previously prepared surface with a hydrostatic paver finisher with sensor control to therequired grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per Clause 504 of MoSRT&H Specifications for Road & Bridge works (4th Revision) including cost and conveyance of materials T&P cost and conveyance of bitumen,etc complete.

Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of Grading II: 10 mm (Nominal Size) premixed with bituminous binder of 60/70 penetration grade of bitumen, transporting the hot mix to work site, laying with hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheelede, libratory and tandem rollers to achieve the desired compaction as per Clause 508 of M oSRT&H Specifications for Road & Bridge works (4th Revision) including cost and conveyance of materials T&P etc complete.

Labour for laying sub-base in layers not exceeding 100 mm watering and compacting to the required density in O.M.C with Power Road Roller including cost and conveyance of sub base materials,hire and running charges of PRR .

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes.

Please Enable Macros to View BoQ information