CWE/GGN/GT-11/2025-26 SPECIAL REPAIR TO FLOORING, JOINERY, PLASTERING, SANITARY FITTING ALONGWITH PERIODICAL SERVICES AND INTERNAL E/M WORK FOR KV SCHOOL BUILDING BAWANA AT AF STN NARELA UNDER GE (AF) GURGAON

Amount

Demolition of cement concrete (un-reinforced) of any description & in any position not specifically provided complete including dismantling of floor tiles etc complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-0 (using 12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring/tiles etc complete all as specified and directed.

M&L for Cement concrete 1:5:10 type E-2 using 40mm graded brick aggregates as in sunken portion of Bath/WC etc complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:3) mixed with water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement in sunken portion of toilet including applying first layer of cement slurry @ 0.488 Kg/Sqm mixed with Acrylic based polymer modified cementitous composite compound @ 0.253 Kg/Sqm (the layer shall be allowed to air cure for 4 hours followed by water curing for 48 hours). 2nd layer acrylic based polymer modified cementious composite compound slurry after air of 1st coat for 4 hours, as per manufacturer's instruction complete all as specified and directed. Note: WPC will be measured and paid separately.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:4) for bedding of tiles complete all as specified and directed.

M&L 10 mm thick rendering in cement mortar (1:3) on vertical surfaces for backing of tiles etc complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:4) for bedding of tiles complete all as specified and directed.

M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Non - skid (joint free) coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 300x600x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to mtach the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L 15-17 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition ) of any description in any position not specifically provided complete all as specified and directed.

M&L for providing reinforced cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for providing reinforced cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in chajjas complete all as specified and directed.

M&L for providing reinforced cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in fins, fascias, louvres, parapets, and railings exc. 60 cm in height, newels, balustrade, and the like complete all as specified and directed.

M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed.

All as per item No.22 here-in-before but 6 mm dia to 8 mm dia

M&L Formwork to soffits of suspended slabs such as roof slabs, floorslabs, landings and similar work not exceeding 200 mm thick rough finished in flat surface complete all as specified.

M&L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 5 cm but n exc 10cm wide rough finished complete all as specified and directed.

M&L Formwork to fins, louvers, fascia/parapet wall rough finished in flat surface complete all as specified and directed.

M&L for guniting work to RCC work in column, flooring, side walls, beam, slab, etc by removing loose concrete cover etc, cleaning of surface with wire brush and applying epoxy paint to rusted reinforcement and S&F welded wire mesh fabric or wire net less than 95 X 95X 3 mm adhesive, plaster grade for concrete admixture 1 part of cement and 3.5 part of sand and average thickness 40 mm and making the surface even including 15mm thick plastering in cement mortar (1:4) on brick or concrete surfaces including finishing the surfaces even and smooth, without using extra cement plumb and making surface true to geometry in line and including necessary form work to be carried at upto double storey building Note.- Where ever reinforcement required will be measured and paid seperatly etc complete all as specified.

Demolition of Mud in roofs, any thickness including plastering and leeping,(whether full thickness removed etc complete all as specified.

M&L for 40 mm thick PCC (1:2:4) type B-0 (Using 12.50 mm graded stone aggregate) as in roof padding complete all as specified and directed.

M&L for 15 mm thick plaster in cement mortar (1:4) mixed with water proofing compound on roof slabs finished even and smooth (without using extra cement) after cleaning of roof surfaces with wire brushes complete all as specified and directed. Notes : WPC shall be measured and paid seperately.

M&L for water proofing treatment with APP (Atactic Polypropylene) modified polymeric prefabricated five layer membrane over roof consisting of cleaning of concrete or plaster surface of roof & parapet walls and applying evenly a bitumen primer confirming to IS 3488 @ 0.40 Kg per sqm laid using buten torch and sealing all joints of APP modified polymeric water proofing membrane minimum weight 3.6 kg/sqm reinforced with non woven polyester fabric (weight not less than 160 grams per sqm) unrolled and bonded to substrata with logitudinal and end laps 100 mm and 150 mm respectively as per manufacturer's instructions complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

M&L for providing plain cement concrete (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in coping or roof kerbs on roof chamfered on edge including trowelling slightly complete all as specified and directed.

M&L for Cement concrete tiles 25cm x 25cm x 22 mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished, set with grey cement and pigments complete all as specified and directed.

Removing bldgs demolished materials / debries exc. 1.50 km but n exc. 5 km and depositing where directed complete all as specified and directed.

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and directed.

M&L for brick work with sub class 'B' old size brick, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar 1:6 etc complete all as specified and directed.

M&L for half brick work with sub class 'B' old size brick, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar 1:4 etc complete all as specified and directed.

M&L for brick work with sub class 'B' old size brick, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar 1:4 etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:6) on brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for 15 mm thick plastering in two layers (10+5) mm in cement mortar (1:4) on brick or concrete surfaces including rendering on fins, fascias, chajja, parapets etc and finishing the surfaces even and fair (without using extra cement), top layer shall be with WPC as per manufacturer's instruction and complete all as specified and directed. Note: WPC shall be measured and paid separately.

M&L rendering 10mm thick in cement mortar (1:3) as in ceilings finished even and smooth (without using extra cement) complete all as specified and directed.

Supply only intergral water proofing compound ISI Marked complete all as specified and directed.

M&L for providing 1-2 mm thick wall care putty on wall before applying oil bound distemper and making the surface uniform complete all as specified and directed. Note: OBD to be measured and paid saperately.

M&L for providing 1-2 mm thick wall care putty on ceiling before applying oil bound distemper and making the surface uniform all as specified. Note: OBD to be measured and paid saperately.

M&L for preparation of newly plastered or unplastered/ undecorated surface of wall and applying two or more coat premium acrylic emulsion paint of interior grade having VOC content less than 50 gms/litre over a coat of primer, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and directed.

M&L for preparation of plastered or unplastered old decorated surface of wall by complete removal of existing treatment by mechanised sander of berger paints or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and filling of holes and cracks with with suitable material like cement or plaster of paris etc and thereafter applying two or more coat premium acrylic emulsion paint of interior grade having VOC content less than 50 gms/litre over a coat of primer, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and directed. Note : (a) Stage for Preparation of surfaces shall be got approved from Engg-In-Charge before applying the finishes. (b) Material shall be procured from manufacturer and work shall be got executed through authorised applicator.

M&L for preparation of newly plastered or unplastered/ undecorated surface of ceiling and applying two or more coat distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and directed.

M&L for preparation of plastered or unplastered old decorated surface of ceiling by complete removal of existing treatment by mechanised sander of berger paints or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and filling of holes and cracks with with suitable material like cement or plaster of paris etc and thereafter applying two or more coat distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre over a coat of primer, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and directed. Note : (a) Stage for Preparation of surfaces shall be got approved from Engg-In-Charge before applying the finishes. (b) Material shall be procured from manufacturer and work shall be got executed through authorised applicator.

M&L for preparation of newly plastered surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for preparation (complete removal of existing treatment) of old decorated external wall/ceiling surface of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7"/9" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on wall/ceiling surface including filling of holes and cracks with with suitable material like cement or plaster of paris etc thus make surface smooth upto 4th storey buildings complete all as specified and as directed. Note : (a) Stage for complete removal of existing surface & Preparation of surfaces shall be got approved from Engg-In-Charge before applying the finishes. (b) Material shall be procured from manufacturer and work shall be got executed through authorised applicator.

M&L prepration of new concrete or plaster surfaces of any description, not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint over priming paint plaster coat complete all as specified and directed.

M&L prepration of old painted concrete or plaster surfaces of any description, not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint over priming paint plaster coat complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc (Distrubed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc (Distrubed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm and n exc 2 Sqm and removing from site.

S&F for Pressed steel frames 105X60mm (made out of 1.25mm thick MS Sheet) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M&L cement concrete (1:3:6) type C0, (using 12.50 mm graded stone aggregate) as in filling of door frames of pressed steel and in bed blocks etc complete all as specified.

S&F for factory made 35mm thick IInd class H.W rail and style Plain framed panelled shutter (two planel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln seasoned and chemically pressure treated.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S&F rolled mild steel in framed work as in doors or steel gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing conforming to Fe- 290.Gde-E-165 complete all as specified and directed.

S&F 1.50 mm thick polycarbonate sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

S&F 100 mm Butt hinges, Stainless steel and fixed complete all as specified and directed.

S&F 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm size extruded aluminium alloy handles fabricated type anodised and fixed complete all as specified and directed.

S&F 250 mm long aluminium alloy anodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections or cast aluminium alloy complete all as specified and directed.

S&F 250 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F powder coated anodized aluminum frame for partition, doors, windows, ventilations with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coated anodized aluminum door shutters, aluminum section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door,100 mm long hinges (3 Nos), anodized aluminum snap beading screws etc. complete all as specified and directed..

M&L for 5.5 mm thick sheet glass ordinary quality and glazing exc 0.50 sqm in each pane fixed with including neopune rubber gasket in aluminium frame work complete all as specified and directed.

S & F 9 mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work complete all as specified and directed.

S&F Mortice lock, vertical type of brass 100 mm 4 Levers with duplicate keys complete all as specified and directed.

S&F aluminium (Die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F window or ventilators section of frame 72x55mm fixed to wall or concrete surface with rowl plugs made of galvanised steel powder coated and section of shutter 47x20mm mulion section 72x50mm (Based steel as per IS 513 "D" quality galanised as per IS 277 with zinc of 120 gms/sqm) glazed or gauged and wire gauge shutter prepare to receive wire mesh to the shutter (Double door shutter) with total coated thickness of 0.6mm including grills/guard bars made of square bars powder coated fixed to window frame with screws including necessary fittings and all builders hardware such as handles, tower bolts and stays etc complete all as specified and as directed. Make : NCL type-4000 Series or equivalent in approved makes (Note : Glass and wiremesh shall be measured and paid separately under respective items)

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F for 4.80 mm thick sheet glass ordinary quality and glazing each pane n exc 0.50 Sqm fixed with neoprene rubber gasket in aluminium frame work complete all as specified and directed.

S&F for 4.80 mm thick frosted glass ordinary quality and glazing each pane n exc 0.50 Sqm fixed with neoprene rubber gasket in aluminium frame work complete all as specified and directed.

S&F stainlees steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks, wire staples or beading etc,complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed.

S&F in repair Double legged Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm, complete all as specifed and direcetd.

S&F in repair aluminium anodised, barrel tower bolt of extruded section and fixed, 200 mm long (ISI marked), complete as specified and directed.

S&F in repair aluminium alloy, 300mm long anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of excluded sections or cast aluminum alloy and fixed, complete all as specified and directed.

S&F in repair Aluminium alloy handle fabricated type anodised, 150mm long (ISI marked), complete as specified and directed.

Taking down wall panelling and similar work all as specified.

S&F for solid colour wood grain printed PVC sheets 5mm thick as in wall panelling inclusive of solvent cement incl necesssary PVC frame work for fixing on brick or concrete wall as per specification and drawing.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed..

Dismantling ceiling board (fiber, pulp insulation) or insulation board/slabs etc including grid work/wooden or aluminium frame works, cover fillet etc Complete all as specified.

M & L for clip in type metallic powder coated 0.5mm thick ceiling with GI framework made of standard Tee , Angle or any other section as in grid type ceiling framework as approved by GE . Ceiling shall be hanged to roof trusses / purlin rafters with the help of GI wire not less than 4mm dia at an interval n. exc 1m , the size of the metallic powder coated ceiling tiles 600 mm x 600 mm complete all as specified and directed.

S&F Ventia blind for window including necessary items required for fix to wall complete all as specified.

Taking up or down steel tubing 15mm bore and connection including cleaning for refixing or removal to store. complete all as specified and directed.

All as per item No. 91 here-in-before but 20mm dia .

Cutting chases, pinning in. making good to facings where required andpointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall etc complete all as specified and directed.

S&F medium grade galvanized steel tubing with all fittings & fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and directed.

S&F tubes medium grade galvanized iron pipe 20 mm dia bore pipe with all fittings & fixed complete to walls & ceiling or laid in floors (including in short length) complete all as specified and directed.

Dismantling of cast iron pipe up to 100 mm dia, jointed in cement mortar and taking out in trenches/Wall if required etc complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints laid in trenches or floor complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints laid in trenches or floor complete all as specified and directed.

S&F in repair 50 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints including bend, tee, laid in trenches/ floors/walls complete.

S&F 110 mm dia PVC (SWR) bends with rubber rings joints fixed as required complete all as specified and directed.

S&F 75 mm dia PVC (SWR) bends with rubber rings joints fixed as required complete all as specified and directed.

S&F 75 mm dia PVC (SWR) vent cowl complete all as specified and directed.

S&F 110 mm dia PVC (SWR) vent cowl complete all as specified and directed.

S&F 110 mm dia PVC (SWR) branch piece, single (single Y) equal or unequal with rubber rings joints fixed as required complete all as specified and directed.

S&F 75 mm dia PVC (SWR) branch piece, single (single Y) equal or unequal with rubber rings joints fixed as required complete all as specified and directed.

S&F 110 mm dia PVC (SWR) junction single, (Single T) equal or unequal with rubber rings joints fixed as required complete all as specified and directed.

S&F 75 mm dia PVC (SWR) junction single, (Single T) equal or unequal with rubber rings joints fixed as required complete all as specified and directed.

S&F 110 mm PVC (SWR) 'P’ trap complete all as specified and directed.

S&F 110 mm PVC (SWR) 'S’ trap complete all as specified and directed.

S&F in repair Salt-glazed stoneware gully traps (150X150) mm, square or round mouthed, type 'P' complete all as specified and directed.

M&L in repair PVC (SWR) 75 mm floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair vitreous china pedestal pattern wash hand basin (flat back) white of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F vitreous china counter basin white of size 500x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F in repair white vitreous China wash down water closet pan (pedestal pattern), and trap (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc. complete all as specified and directed.

S&F as in repair vitreous china squatting pan, white, orissa pattern, size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron ‘P’ trap incl lime concrete bedding and making good to the disturbed surface to match with the existing surface of floor complete all as specified and as directed

S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and directed.

S&F in repair Vitreous China urinals, half stall type , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and mixed in position complete all as specified and directed.

S&F in repair angular two way angle cock with wall flange, 15 mm nominal bore cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two brass nuts & rubber washers complete all as specified and directed.

S&F in repair brass CP mixer for mixing hot & cold water screwed down for iron pipe 15 mm dia and fixed complete with water saving aerator complete all as specified and directed.

M&L in repair for 15 mm dia stop valve/angle valve, cast copper alloy screwed down high pressure, fancy type chromium plated screwed both ends for iron pipe or unions complete all as specified and directed.

S&F in repair bib taps long body, brass, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket with water saving aerator complete all as specified and directed.

S&F in repair Concussive push button taps of brass, chromium plated, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket with water saving aerator complete all as specified and directed.

S&F in repair pillar taps, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm Stop valves, fancy type, chromium plated with long shank and cup (concealed type), high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repair Soap dish of chromium plated or stainless steel fixed to wall with chromium plated brass screws complete all as specified and directed.

S&F in repair 20 mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Dismantling of existing water tanks of steel/PVC/AC of capacity exceeding 500 liters but not exceeding 1000 litres complete all as specified and directed.

S&F for rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position all as per SSR Part I complete all as specified and directed.

S&F in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm bore and fixed, minimum weight of float valve 210 gms complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified & directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with selftapping screws as specified & directed.

M&L prepration of new Steel surfaces of any description, not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint over coat of red oxide primer complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of old painted surfaces of wood & wood based of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces of steel of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Supply & Fixing of 18 mm thick Rajshri 100% solid WPC (Wood Polymer Composite) of (minimum density 650 Kg/Cum) of one side Prelam/Rigidlam and other side balancing laminate colour to make kitchen cabinet shutter/drawer front shutters complete all as specified and directed.

Supply & Fixing of 6 mm thick Rajshri 100% solid WPC (Wood Polymer Composite) plain white board (minimum density 650 Kg/Cum) fixed with screws, solvent cement/adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete all as specified and directed.

Supply & Fixing of auto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as specified and directed.

Supply & Fixing of stainless steel handles 100 mm size for kitchen cabinet/ cupboard shutters complete all as specified and directed.

S&F 75 mm Butt hinges, Stainless steel and fixed complete all as specified.

S&F 150 mm tower bolt, Stainless steel and fixed complete all as specified.

S&F in repair 75mm Hasp and staple, safety type, stainless steel with SS hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including one number chromium plated waste fittings 40 mm dia & waste pipe complete all as specified and as directed.

S&F in repair kitchen plate rack stainless steel 1 mm thick of size 60cm X 75 cm complete fixed to brick/concrete wall, with screw including rawl plug complete all as specified and as directed

S&F in repair white vitreous china laboratory sink size 600x450x200mm with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe including one number chromium plated waste fittings 40 mm dia & waste pipe complete all as specified and as directed.

S&F in repair 25 mm outer dia medium weight pipe made out of stainless steel 304 grade, including decorative ornamental knobs at both ends and one set of ornamental decorative Stainless steel clamps to fixed to walls complete all as specified.

S&F 15 mm outer dia stainless steel rode 1mm thick, with bracket for ward robe including full threaded steel screws complete all as specified and directed.

S&F in repair 100 mm chromium plated grating complete all as specified and directed.

Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation etc for for shafts, wells cesspits, manholes, piers holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in loose/soft soil etc complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soil etc complete all as specified and directed.

Removing excavated soil to a distance exc 250 m but n.exc 500 m and depositing where directed complete all as specified and directed.

Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping of unsound weak concrete and plaster material from slabs/beams/ columns etc. with power/hand driven chisel as directed by the Engr-in-Charge upto 25 mm average depth including saw-cutting of all edges making square shoulders of the cavities complete all as specified and as directed. All loose unsound and cracked concrete shall be removed out side MD land. (Note:- thickness shall be measured excluding plaster)

Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping of unsound weak concrete and plaster material from slabs/beams/ columns etc. with power/hand driven chisel as directed by the Engr-in-Charge upto 40 mm average depth including saw-cutting of all edges making square shoulders of the cavities complete all as specified and as directed. All loose unsound and cracked concrete shall be removed out side MD land. (Note:- thickness shall be measured excluding plaster)

Cleaning loose concrete if any all around reinforcement including from behind the reinforcing bars to give an average 10mm thick (but not less than 10 mm clear air gap) and cleaning reinforcement of total rust using alkaline rust remover with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washed with water and allowing it to dry complete all as specified and as directed. Note:- Length of reinforcement bars cleaned of rust all around shall be measured for payment. Note: thickness shall be measured excluding plaster.

Applying two coats of eposy based passivating, protecting & bonding coat of zinc rich system (Nitcozinc ® primer of Fosroc and equivalent of SIKA/Dr Fixit Pidilite/ krishna Conchem ) as approved by the Engineer-in-charge for old and new reinforcement any dia complete all as specified and as directed. Note: Epoxy based passivating, protecting & Bonding coat of zinc rich system shall be paid for separately.

Supply only epoxy based passivating, protecting & bonding coat of zinc rich system (Nitozinc ® primer of Fosroc and equivalent of SIKA/Dr fixit Pidlite/ Base) as approved by the Engr-in-Charge. Note:- Payment shall be made for the total weight of resin and hardner in manufractured specified proportion.

Mixing and applying SBR latex modified cementituous bond coat using cement 2.2 Kg per Sqm on prepared concrete surfaces of parent material complete all as specified and as directed. Note :- SBR latex shall be paid for separately.

supply only approved SBR latex from FOSROC/BASF/DR FIXIT/SIKA for bonding coat. Note: Rate shall be in terms of solid contents of polymer.

Mixing and applying SBR latex modified cement mortor 25mm thick in cement sand mortor in proportions of 1:3 (1 cement and 2 graded quartz aggregate) with polymer admixed in proportions as approved, including trowelling with wooden tools on prepared concrete surfaces of parent material complete all as specified and as directed. Note:- Acrylic polymer shall be paid for separately.

Supply only approved SBR latex form FOSROC/BASF/DR FIXIT/SIKA for SBR latex modified cement mortor. Note: Rate shall be in terms of solid contents of polymer.

Rebuilding the section of damaged RCC elements to desize size avg thickness 50mm by providing and casting with microconcrete of grade M-40 and above including providing and fixing of watertight shuttering of minimum 12mm thick with supporting framework, all lead lift, mixing, placing, deshuttering, levelling the surface by grinding off cementitious slurry or construction joint differences if any to satisfaction of engr incharge, etc. upto 4th storey buildings complete all as specified and as directed. Name of Manufacturer: BASF/Fosroc/Sika/ Dr Fixit or equivalent

M&L for 75 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base of flooring etc complete all as specified.

M&L sand filling under interlocking tiles for cushioning including watering and consolidation complete all as specified.

M&L for machine presssd rubber moulded precast coloured concrete interlocking paver block any shape confirming to IS-15658-2006 of 60mm thick , M-35 Grade with grey cement and pigment as approved complete all as specified.

M&L 15 mm thick plastering in cement mortar 1:4 on brick or concrete surfaces including rendering on fins, fascias, chajja, parapets etc and finishing the surfaces even and fair (without using extra cement) complete all as specified.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer on walls. complete all as specified.

Demolition and breaking up drain pipes of dia 200mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5 m deep and geeting out in hard/dense soil.

Material and labour for plain cement concrete type B2 (1:2:4) (Nominal Mix) using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed .

Material and labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in benching and haunching including necessary form work complete all as specified and as directed .

Material & labour for RCC (1:2:4) type BI (using 20mm graded stone aggregate) as in precast cement concrete for cover slab set in cement mortar (1:4) with necessary form work complete all as specified and as directed .

Material and labour for Reinforced concrete pipes class NP2 , laid and jointed complete with collars 200mm bore

M&L for plain cement concrete 1:3:6, type C-2 using 40mm graded stone aggregate to drain pipes incl forming cradles for 200 mm NP2 pipes complete all as specified and as directed

Removing excavated material (soil) not exceeding 50 m and depositing where directed at a level n.exc 1.50 m above the starting point.

Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required (200 mm) bore.

Supply and fixing mild steel round bar 10mm dia and over cut to length bend to shape required including cranking bending hooking end etc including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed as in rungs Fe-410 W (Gde E 250) quality A or Fe 290 (Gde E 165)

Cleaning and desludging of existing sewage line of 100 mm to 200 mm bore and depth up to 2.00 mtr from manhole to manhole complete desludging by means of mechanically (Jet Machine) and removal of sludge/silt/liquid/mud and sand (in foul position) etc out side the MOD land including testing of drains by filling the pipes with water complete all as specified and directed by Engineer-In-Charge

Supply and laying galvanised iron pipe, medium grade 20 mm bore with all new fittings, laid in trenches including jointing material etc complete all as specified and directed.

Supply and laying galvanised iron pipe, medium grade 25 mm bore with all new fittings, laid in trenches including jointing material etc complete all as specified and directed.

Supply and laying galvanised iron pipe, medium grade 40 mm bore with all new fittings, laid in trenches including jointing material etc complete all as specified and directed.

Supply and laying galvanised iron pipe, medium grade 50 mm bore with all new fittings, laid in trenches including jointing material etc complete all as specified and directed.

Supply and laying galvanised iron pipe, medium grade 80 mm bore with all new fittings, laid in trenches including jointing material etc complete all as specified and directed.

M&L for Taking up or down steel tubing and connections, including cleaning for refixing or removal to store exixting GI tubing 25 mm bore any type.

M&L for Taking up or down steel tubing and connections, including cleaning for refixing or removal to store exixting GI tubing 50/40 mm bore any type.

M&L for Taking up or down steel tubing and connections, including cleaning for refixing or removal to store exixting GI tubing 80 mm bore any type.

M&L for run lead joints for 100mm dia of cast iron Spun pipes/fittings including burning out old joints and recovering lead complete all as specified and directed :-

Supply, laying and jointing heavy duty CI Bends (any type, radius and angle ), Tapers any type,( straight, bend, increasing, decreasing or double socket etc), Tee pieces single branch, Y junction, Double branch, Cross (all sockets or socket and spigot or all flanged or one end flanged and other ends spigot /socketed), Collars, Caps and Plugs complete and conforming to IS and upto 150 mm bore complete all as specified and directed.

Supplying, laying in trenches/ pedestals, testing and commissioning CI pipes 100 mm dia bore with spigot & socket end centrifugally cast class B, in requisite length and conforming to IS complete all as specified and directed.

M&L for Taking up or down DI/CI water mains 100 mm dia bore (including all fitting) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.

Supply ,fixing ,testing and commissionng in replacement of double flanged non-rising stem type cast iron sluice valve suitable for 100 mm dia bore pipe with hand wheel and suitable for pressure rating of PN :1.6duly drilled holes for fixing of nuts and bolts ,stem made of high tensile brass ISI marked and conforming to IS including rubber gasket ,nuts,bolts and washer incl taking down old u/s old existing complete all as specified and directed.

S & F in repair Gun metal globe or gate valve (ISI marked), with iron wheel head, screwed both ends, suitable for 25 mm bore iron pipe and fixed including testing complete all as specifed and directed by Engr-in-Charge.

S & F in repair Gun metal globe or gate valve (ISI marked), with iron wheel head, screwed both ends, suitable for 40 mm bore iron pipe and fixed including testing complete all as specifed and directed by Engr-in-Charge.

Supply and fix Sprinkler of pressure 3kgf/cm2 quick/early response type with stand, pendent type complete all as specified and directed by engr-in-charge.

Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc all as directed.

Taking down carefully UNSV DB's including MCBs of of any size make, type and capacity and making good disturbed surfaces of wallls/roofs etc

M & L for concealed point wiring complete with PVC insulated and unsheathed FRLS cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit ISI marked medium grade not less than 20 mm dia, with MS stove enamelled sunken boxes piano/modular type including earth dolly with cover plate with frame of modular type of approved make and colour including 1.5 sqmm multi stranded FRLS copper conductor cable of green colour as continuous earth wire with lugs and accesseries and making good disturbed surfaces of walls/floor etc complete all as specified and directed for the followings :-

One light / fan point controlled by one way switch

One bell/buzzer point controlled by one bell push

One 5 Amp socket outlet on independent board.

One 5 Amp socket outlet on same board.

One light point controlled by two 2-way switch

All as per above item No 211 here in before but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, FRLS cable for 15 Amp socket outlet on independent board including 2.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified and as directed.

S&F of switch piano type 5 amp one way 240 volts AC 50 hz ISI Marked complete all as specified and directed by Engineer-in-Charge.

S & F of Piano type switch 2 way, 5 Amp,1 module ISI Marked complete all as specified and as directed by Engineer-in-Charge.

S&F of switch piano type15 Amps one way 240 volts AC 50 hz ISI Marked complete all as specified and directed by Engineer-in-Charge.

S&F of socket outlet 5 pin 5 Amps 240 volts AC 50 hz flush type complete all as specified and directed by Engineer-in-Charge.

S&F of socket outlet 2-in-1, 6 pin 5 amp and 15 amps 240 volts AC 50 hz all as specified and directed by Engineer-in-Charge.

S&F in electronic fan regulator Step type 120 V 100 watts complete all as specified and directed by Engineer-in-Charge.

S&F of bell push flush type 5 amp one way ISI Marked complete all as specified and directed by Engineer-in-Charge.

S&F of Bell, DING DONG AC 230 Volts single pole type complete all as specified and as directed by Engineer-in-Charge.

S&F of ceiling rose surface bakelite 63 x50mm three terminals complete all as specified and as directed by Engineer-in-Charge.

S&F of enviroment friendly indoor decorative 20 Watt LED Aluminium Batten with opal diffuser , operating voltage range 140v to 270 V, Driver efficiency 88%, lumen efficiency =100 lm/watt , THD≤ 20 CRI>80 , colour temperature 6500 K, inbuilt surge protection = 2.5 Kv, isolation=3.75, and with zero mercury content including all accessaries all as specified and directed.

S&F of enviroment friendly indoor decorative 9/10 Watt LED Aluminium Batten with opal diffuser , operating voltage range 140v to 270 V, Driver efficiency 88%, lumen efficiency =100 lm/watt , THD≤ 20 CRI>80 , colour temperature 6500 K, inbuilt surge protection = 2.5 Kv, isolation=3.75, and with zero mercury content including all accessaries all as specified and directed.

Supply and fixing LED type flood light 45 watt 230 watt volts AC outdoor type with t IP 65 class protection with aluminium die cast housing glare free light distribution impact and corrosion resistant operating voltage range 140v to 270 V, total lumen efficiency =100 lm/watt , THD≤ 20 CRI>80 , colour temperature 6500 K, inbuilt surge protection = 5 Kv, 50000 Hrs burning hours complet all as specified and directed..

Taking down ceiling fans/exhaust fan of any size from the site safely and deposited to mes store for further refixing the same complete as directed.

Fixing only ceiling fan received from mes store and connecting up including provision of cable from ceiling rose or connector to fan complete all as directed by Engineer-in- charge.

Fixing only Exhaust fan with different sizes received from mes store and connecting up including provision of cable from ceiling rose or connector to fan complete all as directed by Engineer-in- charge.

Supply and fixing metal plug and socket single pole and neutral with a two pin and earth plug and socket alongwith one single pole MCB of 20 Amp concealed in wall all as directed.

Taking down carefully copper / Aluminium sub main wiring and removing materials from site as directed and making good disturbed surface as directed

M&L submain wiring with 2 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 4 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including concealed conduit and conduit accessories and incl provn of PVC insulated 4 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified and making good to the disturbed surface by plastering and two coat of distamper all as directed at site. Note : Two runs of 4 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length).

M&L submain wiring with 2 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 6 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including concealed conduit and conduit accessories and incl provn of PVC insulated 6 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified and making good to the disturbed surface by plastering and two coat of distamper all as directed at site. Note : Two runs of 6 sqmm cable alongwith one run of 6 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length).

S&F MCBs 240/415 Volts 10 KA finger proof terminal, B curve bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB . (DB will be measured and paid separately under respective items of sch A):-

MCB SPN 40 Amps

MCB SP 5 to 32 Amps

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected toand including galvanized earth lead wire 4.0 mm dia upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dolly all as shown in electrical plate No 3 of MES SSR part I and testing on completion including necessary excavation and earth work in any type of soil,PCC(1:3:6)type C1 chamber,pre-cast RCC slab 50mm thic in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipe,15mm dia,light grade,7.5 mtr long for protection of earth lead upto test point etc incl taking out old u/s existing earthing all as specified and as directed.

Taking down carefully Camera/hooter cable and removing materials from site and deposite it to AGE E/M store for relaying the same as directed and making good disturbed surface as directed

Taking down carefully Camera/hooter and removing materials from site and deposite it to AGE E/M store for relaying the same as directed and making good disturbed surface as directed

Supply, laying, jointing and testing LT cable XLPE insulated, armoured and PVC bedded 1100 volts grade,heavy duty with aluminium conductor 35 Sqmm 3.5 core laid in ducts/through pipes, in floor, on poles, in trenches incl taking out old existing u/s cable complete all as specified.

Supply, laying, jointing and testing LT cable XLPE insulated, armoured and PVC bedded 1100 volts grade,heavy duty with aluminium conductor 50 Sqmm 3.5 core laid in ducts/through pipes, in floor, on poles, in trenches incl taking out old existing u/s cable complete all as specified.

M & L for dry sand cushioning to underground cables with 8 cm thick before laying of cables and 15cm thick after laying (total 23 cm) and compaction complete all as specified and directed . Note : Compacted thickness of sand cushioning 15 cm shall be measured for payment purpose.

Material labour for common burnt clay bricks, sub class 'B' grade laid in trenches for protection of UG cables perpendicular to the direction of the cables complete all as specified and as directed by Engr-in-Charge

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine 1.5 RM deep including HDPE pipe of 75 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.

Supply and fix cable jointing kit for 1.1 KV grade cable for end joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size upto 50 sqmm,Indoor/Outdoor type complete all as specified and directed.

Providing and applying fair finish 15mm thick plaster with ready mix prepacked proportioned dry mix motor mix with polymer fibre fair faces of brick wall or concrete surface additives, on external surface including transporting of material, mixing, curing etc complete all as specified and directed. Make : M/s ACC Autuplast/ M/s Ultratech Readiplast/ M/s Magicplast / CK Birla's AEROCEN Note : WPC shall be measured and paid seperately.

Net Contract Sum will be after deducting Sch of Credit of Rs 3,23,162.14

Phogat Builders (BID ID -3424061)

HI TECH COLONISERS PRIVATE LIMITED (BID ID -3424796)

M/S Rohit Enterprises (BID ID -3424805)