PETTY REPAIR TO B/R ITEMS AND MISC B/R WORKS AND SEWAGE CLEANING/ MAINT OF SEWAGE SYSTEM AT KHYBER LINE AND REPAIR/ REPLACEMENT OF FALSE CEILING GALVALUME ROOF SHEETING HARD STANDING RCC CHAJJA BRICK WORK PLASTER AND ROOF REPAIR AT IHQ MOD (ARMY) CAM

Amount

Taking down door chowkhat or frame with shutters (without taking off shutters from the frame exc 1.5 sqm but nexc 4 sqm each complete all as specified and directed by Engineer-in-charge.

Taking down window chowkhat or frame with shutters (without taking off shutters from the frame exc 1.5 and n.exc 4.00 sqm each complete all as specified and directed by Engineer-in-charge.

Taking down door chowkhat or frame with shutters (without taking off shutters from the frame n. exc 1.5 sqm each complete all as specified and directed by Engineer-in-charge.

Taking down window / ventilators chowkhat or frame with shutters (without taking off shutters from the frame n.exc 1.5 sqm each complete all as specified and directed by Engineer-in-charge.

S&F in repair factory made 2nd class 35 mm thick hardwood glazed and skelton shutters open rebated and prepared to receive glass / gauze etc ( with or without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 cluse 8.24(a) complete all as specified and directed by Engineer-in-charge.

S&F in repair 35mm thick flush shutters solid core construction with block board core and plywood face panels,commercial type on both side complete all as specified and directed by Engineer-in-charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be coloured with heat mould plain coloured PVC'C channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stills and plain colour PVC sheet for top rail lock and botton rail either side and as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading. And jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engineer-in-charge.

S&F solid PVC doors frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm MS square tube of 19 guage s&f in opening as per specification & drg in SSR 2009 Part-1 complete all as specified and directed by Engineer-in-charge.

S&F 100 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed by Engineer-in-charge.

S&F 75 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed by Engineer-in-charge.

S&F in repair 18mm thick prelaminatd medium density fibre board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for cubboard complete all as specified and directed by Engineer-in-charge.

M&L for teakwood (18mmx6mm)Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads sectional area n.exc. 3 Sqcm including polishing complete all as specified and directed by Engineer-in-charge.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to aluminium window frame / wooden doors or steel section windows complete all as specified and as directed by Engineer-in-Charge

S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-charge.

S&F Mild steel barrel tower bolts of 200 mm long , stove enamelled black, with bright bolt and fixed with ms screw complete all as specified and directed by Engineer-in-charge.

S&F MS sliding door bolt 250mm long clip type stove enameled black with bright bolt not less than 12mm dia with incl min of 6 bolt and nuts four on bolt plate and two on stapple plate complete all as specified and directed by Engineer-in-charge.

S&F aluminium alloy handles extruded, fabricated type, anodised ,of 150 mm size complete all as specified and directed by Engineer-in-charge.

S&F aluminium alloy handles extruded, fabricated type, anodised ,of 200 mm size complete all as specified and directed by Engineer-in-charge.

S&F floor door stopper of aluminium alloy body and tongue,anodised,with hard drawn steel spring of 140 mm size with vulcanised rubber piece complete all as specified and directed by Engineer-in-charge.

S&F hasp and staple,75mm size safety type,aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer-in-charge.

S&F rolled mild steel in Fe 410-W(Gde-E-250) quality-A, framed work as in doors or gates of angle or other section with gusset plates, etc., complete, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete all as specified and directed by Engineer-in-charge.

S&F factory made steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engineer-in-charge.

S&F factory made steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed by Engineer-in-charge.

S&F Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engineer-in-charge.

M&L for sheet glass,3mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new or previously untreated surfaces of wood of any description not otherwise described width or girth and applying two coats of synthetic enamel paint over & incl one coat of pink primer complete all as specified and directed by Engineer-in-charge.

M&L for preparation of newly surfaces of steel of any description not otherwise described width or girth and applying two coats of synthetic enamel paint over & incl one coat of red oxide primer complete all as specified and directed by Engineer-in-charge.

S&F in repair dropery rod mild steel powder coated teak wood finish 30mm internal dia & 0.90mm thick with wooden rings and teak wooden brackets and teak wood side knobs all as per sample complete all as specified and as directed by Engineer-in-Charge

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing removing serviceable to store and rubbish off the premises complete all as specified and directed by Engineer-in-charge.

M&L for non Skid ceramic tiles 7 to 8mm thick coloured & joint free (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-charge.

M&L for glazed coloured ,joint free ceramic tiles in vertical surface of size 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-charge.

M&L for coloured joint free non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match for laying floor finish complete all as specified and as directed by Engineer-in-Charge.

M&L for 15 mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, complete all as specified and directed by Engineer-in-charge.

M&L for 10 mm thick rendering on brick/concrete surfaces in CM (1:3) (As screeds in back of tiles) in dado complete all as specified and directed by Engineer-in-charge.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-charge.

M&L for rounding to edges of stone slabs one edge, such as in steps cooking platform ,and other similar situations complete all as specified and directed by Engineer-in-charge.

S&F in repair stainless steel sink with drainage board of 1 mm thick sheet for kitchen with plug washer, waste pipe, cast iron cantilever brackets connecting union, fixed in position complete all as specified and directed by Engineer-in-charge.

S&F in repair wash hand basin vitreous China flat back 550x450mm size white, including PVC waste coupling 32mm size, pair of brackets of mild steel 35 x 35 x 6mm size including complete all as specified and directed by Engineer-in-charge.

S&F in repair vitreous china squatting pan (Orissa pattern) long pan fixed size 580x440mm white with integral footrest with `P' or `S' trap complete (excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-charge.

S&F in repair 15 mm bore , Pillar taps (fancy type), cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-charge.

S&F in repair PVC connection for 15 mm bore pipe,450mm long complete all as specified and directed by Engineer-in-charge. Make:Pryag/polytuf

S&F in repair PVC Waste pipe for 32mm bore pipe complete all as specified and directed by Engineer-in-charge.

S&F in repairs Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engineer-in-charge.

S&F in repair, PVC valveless , syphonic action type flushing cisterns 10 ltrs capacity , low level , white, with inlet ball valves , float and handle including brackets and pvc flush pipe 32 mm dia for low level complete all as specified and directed by Engineer-in-charge.

S&F in repair Stop valves 15 mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-charge.

S&F in repair brass CP swivel shower rose of size 100/125mm with arm including fixing to steel pipes complete all as specified and directed by Engineer-in-charge.

S& F in repairs grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all as specified and directed by Engineer-in-charge.

Taking down cement plaster including racking out joints hacking for key scrubbing down with water etc on walls and ceiling complete all as specified and directed by Engineer-in-charge.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 on wall surfaces and finished surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 on wall surfaces and finished surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

M&L for 10 mm thick rendering in CM (1:3) on ceiling finished even & Fair Without using extra cement complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old plastered surfaces as on wall and applying one coats of cement based paint complete all as specified and directed by Engineer-in-charge..

M&L for complete removal of existing treatment of old treted surface and applying two coats of distemper oil emulsion over water based primer with 2 mm thick JK wall putty on wall surfaces complete all as specified and directed by Engineer-in-charge.

M&L for preparing old plastered surfaces and applying a coat of white wash on wall complete all as specified and directed by Engineer-in-charge.

M&L for preparing old plastered surfaces and applying a coat of white wash on ceiling complete all as specified and directed by Engineer-in-charge.

M&L for preparation of newly plaster surfaces and applying three coats of white wash on ceilling complete all as specified and directed by Engineer-in-charge.

M&L applying two coats of cement base paint, white or tinted on new plastered surface including preparation of surface complete all as specified and directed by Engineer-in-charge.

M&L for of new plastered surface and applying two coats of distemper oil emulsion over water based primer with 2 mm thick JK wall putty on wall surfaces complete all as specified and directed by Engineer-in-charge.

Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing complete all as specified and directed by Engineer-in-charge.

Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing complete all as specified and directed by Engineer-in-charge.

S&F 15 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors or concealed, complete all as specified and directed by Engineer-in-charge.

S&F 20 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors or concealed, complete all as specified and directed by Engineer-in-charge.

M&L in repair 75 mm out let dia CI floor trap incl jointing to waste pipe in run lead complete all as specified and directed by Engineer-in-charge.

Attending complaint for repair to leaking water in bib tap, pillar tap, stop cock, angle valve, flushing cistern, WHB, Sink, wall mixer etc. of any description, any size by changing the washers(s)/jumper(s) etc, by adjusting/replacing the washer(s) and adjustment of lever required for making the flushing cistern functional, by tightening the leaking waste pipe of WHB/Sink and providing 'M' seal to stop leakage as required, Removal of air lock/blockage of water in GI water tubing and cleaning the pipe or fittings etc to maintain the day to plumbing complaints by engaging /deploying One plumber from 0900 hours to 1700 hours at Complaint cell of Khyber line of the area AGE B/R -I(South) mentioned in the contract on daily basis alongwith necessary equipments. complete all as specified and directed by Engineer-in-charge. Note 1:- The contractor shall make all arrangement for attending the different types of complaints on day to day basis. Any major item required to be replaced with new one, to make the system functional shall be measured and paid for separately as "S & F" under respective item of this schedule. Old retrieved item(s) as considered in 'Schedule of Credit' shall become property of the contractor. 2. Contractor shall provide minimum one plumber including all necessary T&P on all working days from 9AM to 5PM at Complaint cell of Khyber line of AGE B/R -I(South) . Additional workers can be engaged if nature of work required to be completed within fix time frame as desired by the GE. Rate shall be quoted accordingly, keeping in mind above said provisions. 3. Where material provided shall be paid as "S&F" under respective item of Sch 'A', the payment of complaint under this item shall not be paid. 4. Proper records (date wise) of complaints received & rectified by the contractor and attendance register of trademen shall be maintained by Engineer-in-charge.

M&L in repair 100 mm out let dia CI floor trap incl jointing to waste pipe in run lead complete all as specified and directed by Engineer-in-charge.

S&F in repair PVC(SWR) pipes 110mm bore size single socketed, in any length with rubber ring joints,laid in trenches or in floors complete all as specified and directed by Engineer-in-charge.

S&F in repair PVC(SWR) bends any radius, of 110mm bore size complete all as specified and directed by Engineer-in-charge.

Demolition of brick work built in CM incl quoins, arches, pillers etc complete all as specified and directed by Engineer-in-charge.

M&L brick work in cement mortar (1:6) using sub class 'B' bricks, straight or curved on plan exc 6 mtr mean radius complete all as specified and directed by Engineer-in-charge.

All same as per ser item No. 70 above but in CM 1:4 for half brick wall

Dismantling water tanks of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and directed by Engineer-in-charge.

S&F 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part II complete all as specified and directed by Engineer-in-charge.

S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball ,screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-charge.

S&F in repair gun globe or gate valve for 15 mm bore pipe with iron wheel had screwed both ends for iron pipe complete all as specified and directed by Engineer-in-charge.

S&F in repair gun globe or gate valve for 20 mm bore pipe with iron wheel had screwed both ends for iron pipe complete all as specified and directed by Engineer-in-charge.

S&F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-charge.

S&F in repair 3mm thick sheet glass ordinary quality and galzing with oil putty or wooden beads in squares of any size complete all as specified and directed by Engineer-in-charge.

S&F in repairs PTMT bib tap standard, (Minimum weight 90 gms) any colour, fixed to 15 mm bore iron pipe complete all as specified and directed by Engineer-in-charge. (Make :Prayag cat no 121 or equivalent model of Symet/Polyplast)

S&F in repairs 15 mm bore PTMT pillar taps of any colour high pressure screwed for iron pipe and fixed (Minimumweight 15mm-110gms) complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15 mm bore PTMT angle valve of any colour high pressure screwed for iron pipe and fixed.(Minimumweight 15mm-90 gms)) complete all as specified and directed by Engineer-in-charge.

M&L for cleaning of all blockages of Nahni traps/floor traps/bottle traps, blockages of WC's, Rain water pipes, Rain water spouts at roof level, 100 mm dia CI pipes upto 1st manhole/GT in shafts, vertical CI soil/waste pipe stacks, CI Tee/door bends etc & cleaning of drain pipes 150 mm to 250 mm internal dia by rodding and manholes upto 3.0 metre in depth and removal of sludge/silt/liquid mud sand (in foul conditions) etc, out of MOD premises (at the location notified by the local Municipal Corporation/Cantt board) complete all as specified and directed by the Engineer-in-Charge to maintain internal & external sewage system in functional state at all the time by engaging/deploying One safaiwala from 0900 hours to 1700 hours at Complaint cell of Khyber line mentioned in the contract on daily basis, with manual/pressure cleaning pump and flexible rods and other necessary equipments (as per rules of public health), including digging required nos of pits for depositing sludge and furture capping the pit with the 25 cm thick layer of soil. complete all as specified and directed by Engineer-in-charge. Note for item No 1 :- The No of persons indicated in above items as assumed by the department, shall remain present at the complaint cell at Khyber line of AGE B/R-I (south). Contractor may have to deploy more manpower in the particular area and deploy adequate sewage cleaning machinary/ equipments to clean the line and open blockages. Rates quoted shall be deemed to have considered all such contingencies. 2. In case of non availability/ absence of any of minimum required tradesmen, the recovery for the same shall be effected at double the minimum fair wages applicable for the relevant category or double the market rates whichever is higher, in addition to non payment of this item for the absence period proportionaly. 3. If necessiated by the Engr-in-charge/GE for work on Sunday/ holidays, the contractor shall provide tradesmen with helpers. 4. Proper records (date wise) of complaints received & rectified by the contractor and attendance register of trademen shall be maintained by Engineer-in-charge.

M&L for cleaning of manhole of size n.exc 1.5m x 1.5m x 1.50 metre by taking out the sludge mud/silt etc and removing to outside of MoD premises(at the location notified by the local Municipal Corporation/Cantt board) complete all as specified and directed by Engineer-in-charge.

Excavation in trenches in soft/loose soil, not exc 1.5m wide & n exc 1.5m in depth as in foundation , mainholes etc.n exc 10 sqm on plan and n exc 1.5 m in depth and getting out complete all as specified and directed by Engineer-in-charge.

Demolition and breaking up drain pipes (salt glazed stoneware/ACC/RCC), set in cement mortar, including removal of waste material upto 500 metre distance at the place notified by the Engineer-in Charge of 150mm dia of pipe complete all as specified and directed by Engineer-in-charge.

M&L for salt glazed stoneware drain pipes 150 mm bore, laid in trenches and jointed in cement mortar (1:4) and tested complete all as specified and directed by Engineer-in-charge. Make:-PERFECT(Jabalpur), BURN(Jabalpur), DEVRAJ(Gaziabad).

M&L for plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against sides of pipes after they are laid and tested of 150mm bore of SWG pipes complete all as specified and directed by Engineer-in-charge.

Returning, filling in including, spreading, levelling, watering and well ramming in layers n.exc 25cm thick, in soft/loose soil complete all as specified and directed by Engineer-in-charge.

Removal of excavated surplus soil to a distance not exc 50 metre where directed by Engineer-in-Charge at a level not exc 1.5m above or below the starting point complete all as specified and directed by Engineer-in-charge.

S&F in repairs SFRC manhole cover size (1200 X 600 x 70 )mm thick with frame set in cement mortar 1:4 complete all as specified and directed by Engineer-in-charge. Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete. (b) M/s KK Manhole.(c) Or equivalent as approved by GE” (ii) Contractor will provide manufacturer test certificate of SFRC cover & frame

M&L in repair, salt glazed stone ware gully trap, square or round mouthed,150mm x 150 mm size, shape as required,including dismantling and taking out of old GT and jointing with old connection and pipes complete all as specified and directed by Engineer-in-charge.

M&L for extra for forming fair finished drain or channels 30 cm inner girth in cement concrete using cement including forming moulds,mitred/stopped ends etc complete all as specified and directed by Engineer-in-charge.

M&L for PCC(1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation and mass concrete complete all as specified and directed by Engineer-in-charge.

M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping, benching rounded or chamferred on edges includind use and waste of form work complete all as specified and directed by Engineer-in-charge.

Demolition of cement concrete in ground floors and pavings n'exc 15 cm thick below or above ground level (unreinforced) complete all as specified and directed by Engineer-in-charge.

S&F providing 60 mm thick machine pressed precast concrete interlocking paver block (yellow and red) any shape and size confirming to IS-15658-2006, M-35 grade with grey cement and pigment over 30 mm sand coushning complete all as specified and directed by Engineer-in-charge.

BLANK

M&L for heavy duty colored chequered cement concrete tiles 30cmx30cmx25mm set, jointed & pointed in neat cement slurry in floors with grey cement & pigment over 20mm thick screed in CM (1:6) with grey cement and pigment complete all as specified and directed by Engineer-in-charge.

BLANK

Supply and fixing factory made fiber glass reinforced plastic (FRP) chajja 4 mm thick of required colour, and design of approved make made by resin transfer moulding (RTM) machine technology ,resulting in void free compact lamination in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos vertically and 1 nos horizontally 50x2 mm flanges duly inserted and sealed in the wall complete in the single piece casted monolithically, including all necessary fittings . The FRP Chajja should be manufacture using unsaturated polyester resin as per IS 674 , duly reinforced with fibre glass shopped strand mat (CSM) as per IS 11551 complete with protective Gel coat U/V coating on the top for complete resistance from the extreme of temperature ,weather & sunlight (only plain area of chajjas shall be measured for making payment) complete all as specified and directed by Engineer-in-charge.

Demolition of RCC (other than ground floors ) beams staircase landing, chajjas and similar suspended work complete all as specified and directed by Engineer-in-charge.

Supply & fixing in repairs false ceiling with semi perforated 12 mm thick micro tegular edged at all heights with GRG (glass fiber reinforced Gypsum ) false ceiling tiles of size 595/X595 of approved texture design and patter having moisture contain less than 2%, humidity resistance of 99%, NCR 0.50 to 0.75 as per IS 8225, 1987, non combustible as per BS 475 ( Part -IV1970 and light code description unit rate No 429 SUB HEAD 26.0 NEW TECHNOLOGIES AND MATERIAL reflectance of 85 % minimum to laid in true horizontal level suspended on interlocking metal T grid of hot dipped galvanized iron section of 0.33 mm thick ( galvanized @ 120 gms per sqm including both side comprising of main T runner of size 15X 32 mm of length of 3000 mm , cross T of size 15 X 32 mm of length 1200 mm and secondary intermediate crass T of size 15 X 32 of length of 600 mm to form grid module of size 600 X 600 mm suspended from ceiling using galvanized metal sheet item (galvanized @ 80 per sqm ie 50 mm long 8 mm outer dia meter M-6 , fasteners , 6 mm dia fully threaded hanger rod up to 1000 mm length and L shape level adjusters of size 85 X 25 galvanized iron perimeter wall angle of size 24 X24 X 0.40 mm of length 3000 mm to be fixed on perimeter of wall / partition with the help of plastic rawl pluhs at 450 mm centre to centre and 40 mm long dry wall screw . The work shall be carried out as per specification drg acomplete all as specified and directed by Engineer-in-charge.

S&F in repair miled steel framed work using MS tubular pipe etc including necessary cutting,drilling,welding as required complete all as specified and directed by Engineer-in-charge.

S&F in repairs pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-charge.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling asbestos cement/ CGI (corrugated semi corrugated, etc) sheet in roof covering complete all as specified and directed by Engineer-in-charge.

M&L for preparation of newly steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge.

Dismantling Brick tiles or terracing tiles single layer on roofs and removal from site complete all as specified and directed by Engineer-in-charge.

Demolition mud in roofs any thickness including plastering and leaping and removal from site exc 250 m but not exc 500 m and deposited complete all as specified and directed by Engineer-in-charge.

M&L for PCC 1:2:4 type B-1 using 20 mm graded aggregate as in roof padding for providing rqd slop finishing surface even and smooth with out using extra cement complete all as specified and directed by Engineer-in-charge.

M&L for screed bedding 15 mm thick plaster in CM 1:4 on roof finished even and fair using extra cement on roof with water proofing compound up to four stories bldgs WPC shall be measured and paid seperately complete all as specified and directed by Engineer-in-charge.

S&F APP based polymeric water proofing membrane minimum weighing 3 Kg/sqm and 3mm thick reinforced with polyster non wove fabric ( weight not less than 150 gms/sqm laid over and including applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm by torch application including cleaning of surface complete all as per approved manufacturer,s instructions complete all as specified and directed by Engineer-in-charge. Note:- The water proofing treatment shall be got carried out by manufacturer or their auth applicators complete all as specified.

M&L for cement concrete tiles 30cmx30cmx22mm thick laid over and including 20mm thick screed in cement mortar 1:6 and jointed grouted and pointed in CM 1:3 complete all as specified and directed by Engineer-in-charge.

Supply only water proofing compound.(ISI Marked Cico or equivalent) complete all as specified and directed by Engineer-in-charge.

Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

P R Constructions

A N BUILDERS

Chaudhary Constructions