Construction of Production Tube Well at Poshpathri Khonmoh.

Amount

PART "A" Drilling/ boring of exploratory test bore well at mentioned site for construction of production tube wells. The job shall be inclusive of all logistic support in terms of men, machinery and stores at site. Job includes providing, fitting & lowering of 125 mm Dia Heavy Duty MS Pipe as casing of minimum thickness 5.4 mm for the well. The charges on account of loading/ unloading, shifting of men & machinery shall be arranged by the firm. The strata sampling is to be carried out along with drilling and the samples collected in the transparent plastic boxes duly labeled. The exploratory bore has to be cased simultaneously vide drilling in case of ODEX drilling or cased at the completion of drilling in open drilling. Sample collection of strata to be collected for examination. After every 10 ft. The specifications of the bore well shall be as under; i. Max depth of the bore ……. 200 M ii. Acceptable Make of Pipe …… Jindal/Prakash Surya or Equivalent make Class of pipe …. C class conforming to IS:1239 (Part Ist ) 2004,equivalent to BS -1387/1985. Acceptable make for Pipe….. Jindal /Prakash-Surya /TATA The inspection at every stage shall be carried out by departmental experts to determine the aquifer zones. The construction of Production well shall be decided after analyzing the litho-logy of the test bore. This shall be duly authenticated by the Site engineers/ drilling staff including the contracting agency as well. The decision for construction of full-fledged production Bore hole shall be then taken with proper ascertaining of quality and quantity of water. Note: The pipe has to be provided by the firm and the rates quoted are inclusive of p/f of pipes

Description of Work / Item(s)

Amount

PART B (ODEX) Drilling of a 200/250 mm dia Bore hole with ODEX attachment in all kind of Soils, Boulders, Hard-rock, saturated Soils, the drilling includes the cost of suitable casing Shoe, all consumables, water, fuel, lubricants and other accessories complete in all respect.

Lowering of 200mm dia MS Casing pipe including slotted pipe and fabrication of the conical bail plug as per the casing assembly chart as per the drawing issued by site engineers in accordance with the soil strata as per the exploratory remarks. the job includes lenght to length joining of pipe lengths by welding over v grooves created by beveling to ensure robust jointing, strengthening of pipe joints by welding. moreover vertical alignment has been checked at all joints to ensure an exact coaxial alignment of well assembly. the job includes beveling of pipe in case beveling in not proper or was damaged during transit is to be done by a grinder at site. The material MS Pipe shall be provided by the department

a) Development of tube well with back wash method with Air Compressor of minimum capacity 1000CFM (300 PSI air delivery system) with pumping pipe of minimum 100 mm dia. and air line of minimum 65 mm dia till well is thoroughly developed as per clause 4.2 of IS 11189 code 1985 with up to date amendments if any complete in all respects as per the direction of the Engineer in charge, for a minimum period of at least 40 hours. b) Development of tube well be continuous over pumping method with the submersible pump of suitable capacity not less than double the discharge established by the compressor. free of allsediments as per IS 11189 code 1985 with up to date amendments if any, for a minimum period of at least 30 hours. the draw down and the discharge to be established by running the pump continously for 8houres in presence of the officer of the department not less than the rank of AEE. the complete well thus constructed is to be handed over to the territorial meechanical division for harnessing. complation of test for yield to ensure that the quality of water is as laid down in IS-10500; 1983. the grouting & sealing of the tube well needs to be done to ensure safe sanitary conditions as per IS-2800; 1991. An apron around the well (mix shall be M10 grade) & slopping away from it to protect the well from pollution hasto be constructed to prevent contaminated water flowing back into it. the casing pipe is to be anchored within the apron by welding ISMC-150 steel bracing with crates & sufficient welding area 2 mtr length each bracing embedded within the apron (4 bracing). the complete well thus constructed is to be handed over to the territorial mechanical division for harnessing. i. Apron Size = 2.5 mtr × 2.5 mtr. ii. Apron depth at skirt = 300 mm. iii. Apron depth at well casing = 350 mm.

M/S AGE BUILDERS

M/S AGE BUILDERS