NIT/01/EE/EMU/AUD/2025-26

Amount

CIVIL

Excavating holes more than 0.10 cum & upto 0.5 cumincluding getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)

Disposal of moorum/ building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-Charge.

Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be weilded with exiting MS section including with applying a priming coat of approved steel primer, the cost of materials, labour, tool & plants as approved by Engineer-in-charge.

Buy back for taking away the MS steel gate from the site as per direction of Engineer in charge. The qouted amount to be paid by the Contractor or to be recovered from the Contractor as per actual quantity.

Replacement of wooden battens with MS steel sections in the roof, including repairing wall holes, painting, and ensuring proper safety measures by providing support with props. The work also includes the removal of rubbish at the d dumping ground, all complete as per direction of Engineer in-Charge.

Providing and fixing porta cabin WALLProviding and fixing of customized 50mm thick PPGI Puff panel for wall (Sandwiched with high density polyuretharene foam in berween two pre painted galvanised iron sheet panel made of 0.40mm thick sheet 40+/- 2kg/cubic meter density as per Manufacturer specifications) of height 2.50 mtr and fixing door of size 0.9x2.10 mtr with the same material as of wall including all fittings & fixtures for locking arrangement and including making provision for opening for doors, windows, ventilators, electrical conduits, switch boards etc and cutting to size and shape wherever required complete in all respect.ROOF Providing and fixing stomized 30/60mm thick corrugated PPGI Puff panel for roof (Sandwiched with high density polyuretharene foam in between two pre painted galvanised iron sheet panel made of 0.40mm thick sheet 2kg/cubic meter density as per Manufacturer specifications) with proper roof slope including necessary fittings & fixtures and cutting to size and shape wherever required complete in all respect at all level including loading unloading and cost of frame structue support of roof purlins, rafters and trusses etc. along with additional 0.15 mm projection on side for sheltter from rain .FLOORING Providing and fixing of customized 40mm thick PPGI Puff panel for floor (Sandwiched with high density polyuretharene foam in berween two pre painted galvanised iron sheet panel made of 0.40mm thick JSW sheet 40+/- 2kg/cubic meter density as per Manufacturer specifications) Over frame work of cabin floor and platform along with top layer of 2mm thick homogeneous polyvinile chloride sheet/tile of approved colour and shade, in flooring and skirting in approved pattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer like fevicol SR 998 or equivalent including rolling with light wooden roller.ALUMINIUM WINDOW AND OTHER FIXTURES Providing and fixing 2 nos powder coated aluminium sliding window of size 1.20 x 0.90m with frame and shutter and thickness of the section not less then 1.628mm along with all fitting & fixture i.e FIixed jalli, handle and lock etc.FLOAT GLASS PANES Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm).miscellaneous - Provision of fixed table of MS Tuble and 12mm plywood top and size of the top is 1.80x0.25m. wherever required complete in all respect at all level including loading unloading and cost of frame structure support of wall etc. as per direction of Engineer- In- Charge. (Note: Rates are inclusive of GST. all taxes & cartage etc. and the payment shall be made based on the plinth area covered )

bhagatconstruction (BID ID -1601573)

Bidder Name

bhagatconstruction