Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.7 LAccepted-AOC NEAR RAM JANAKI HIGHER SECONDARY SCHOOL H NO 03 THAKURBAR DIMAPUR NAGALAND 797112 | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L1 | Accepted-AOC 1st Lowest | |
| 2 | L2₹44.1 L+₹2.7 L (6.55%)Rejected-AOC N S T COLONY CIRCULAR ROAD HOUSE NO 04 DMC DIMAPUR 797 112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L2 | Rejected-AOC 2nd Lowest | |
| 3 | L3₹45.0 L+₹3.6 L (8.59%)Rejected-AOC | L3 | Rejected-AOC 3rd Lowest | |
| 4 | L4₹45.5 L+₹4.1 L (9.98%)Rejected-AOC | L4 | Rejected-AOC 4th Lowest | |
| 5 | L5₹46.5 L+₹5.1 L (12.2%)Rejected-AOC RANGAPAHAR CROSSING RAILWAY GATE NO 1 DIMAPUR 797 112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L5 | Rejected-AOC 5th Lowest |
Tender Value
₹39 L
EMD Value
₹78,000
Closing Date
24 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
SPL REPAIR TO BLDG NO T 23 OF TRANSIT CAMP ADDN ALTN TO BLDG NO T 73 IN C ZONE BLDG NO BT 7 AT TRANSIT CAMP PROVN OF JAFRI WALL OPP SIDE NEAR BLDG NO P 540 OF ENGR REGT AND PROVN OF SEPTIC TANK SOAK WELL FOR TOILETS AT MAIN OFFICE BLDG NO T 09 I
2023_MES_584440_1
8522/C/E8
Open Tender
Civil Works
Item Rate
180 days
RANGAPAHAR
Class D, Category a(I)
2 documents required · 2 mandatory
₹500
GE 868 EWS
₹78,000
27 Apr 2023
4 Mar 2023
27 Mar 2023
4 Mar 2023
24 Mar 2023
18 Mar 2023
4 Mar 2023 - 11 Mar 2023
Amount
Dismantling boarding any description fixed in any position with nails etc complete all as specified and directed .
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverig complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre pulp insulation etc) or insulation boards, slabs, blankets any thickness, incl cover fillets etc complete all as specified and directed .
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engineer-in-charge.
Taking Down 15mm steel tubing and connections complete all as specified and directed by Engineer-in-charge.
Taking Down 20mm steel tubing and connections complete all as specified and directed by Engineer-in-charge.
Taking down Shutter of any description n.exc 1 sqm each (Per leaf) complete all as specified and as directed.
Taking down chowkats or frames with shutters with exc. 1.5 Sqm but n.exc. 4 Sqm each complete all as specified and as directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
Dismantling of frame work Timber scantling 40 Sq cm and over in section in any position complete all as specifed and directed.
Dismantling Timber scantling unframed work 40 Sq cm and over in section in any position complete all as specifed and directed.
Demolition of reed, Lathing, single or double, including battens and olaster or chicken wire lathing complate all as specified and as directed.
S&F pre-painted galvalume aluminium zinc coating GI based semi corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified .
All as per Item No-13 here-in-before but plain sheet as in ridges, roof covering or in cladding etc complete all as specified and directed .
M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. set and jointed in neat cement slurry over screed bed of 15 mm thick in CM1:6 etc complete all as specified.
All as per item No 15 here-in-before but in skirting including 10mm thick plastering for backing coat in cement mortar 1:4
M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed by Engineer-in-Charge.
M&L for Glazed and skeleton shutters, (30mm thick)open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats complete all as specified and as directed by Engineer-in-Charge.
S&F 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed by Engineer-in-Charge.
Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed .
S&F 100 mm long aluminium anodised, barrel tower bolt of extruded sections complete all as specified and as directed by Engineer-in-Charge..
S&F 150 mm long aluminium anodised, barrel tower bolt of extruded sections complete all as specified and as directed by Engineer-in-Charge..
S&F 200 mm long aluminium anodised, barrel tower bolt of extruded sections complete all as specified and as directed by Engineer-in-Charge..
S&F 75mm Butt Hinges medium weight cold rolled mild steel complete all as specified and as directed by Engineer-in-Charge..
S&F 125mm long aluminium alloy handled, fabricated type anodised complete all as specified and as directed by Engineer-in-Charge.
S&F 150mm long aluminium alloy handled, fabricated type anodised complete all as specified and as directed by Engineer-in-Charge..
M&L for Preparation of Old wooden Surface exc 10 cm width or girth and applying One coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge..
M&L for Preparation of New wooden Surface exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge..
S&F 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller complete complete all as specified and as directed by Engineer-in-Charge..
S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed.
M&L for Rendering 10mm thick cement plaster in CM 1:6 on the other side of lathing finished even and fair without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick cement plaster in CM 1:4 on the other side of lathe plaster finished even and fair with WPC @ 2% by weight of cement content and without using extra cement complete all as specified and directed.
M&L for Rendering 10mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surface finished even and fair without using extra cement complete all as specified and directed.
M&L for Rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surface finished even and fair with WPC @ 2% by weight of cement content and without using extra cement complete all as specified and directed.
S&F Floor door stopper of aluminium alloy body and tounge, anodised, with hard drawn steel spring , fixed in floor , overall length of cover plate 140mm etc complete all as specified and as directed.
M&L for Second class clean sawn hardwood in scantling fixed in timber framed work complete all as specified
All as per item No. 37.0 here-in-before but except timber complete all as specified and directed.
S&F in repair 0.71 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc in walls, ceilings, stanchions, beams etc, including all laps cutting and waste complete all as specified and as directed.
M&L for applying two coats of OBD on new plastered surfaces of walls over a coat of chalk white primer including preparation of newly plastered surfaces complete all as specified and as directed by Engr-in-Charge.
M&L for applying one coat of Synthetic enamel paint on Old wooden painted Surfaces of any description, n.exc 10cm in width or girth all as specified and as directed by Engr-in-Charge.
M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection, paving, footpath etc and finished the surface even and smooth without using extra cement complete all as specified and as directed.
M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.
M & L for 25mm thick second class hard wood boarding , plained one side with butt joints as in Eaves Boards etc complete all as specified and as directed.
M&L for 15mm steel tubes medium grade galvanised with all fitting and fixed complete to walls and cellings or laid in floors complete all as specified & directed.
S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors.
M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified & directed.
M&L for Screed bed or bedding (CM 1:4 ) layer of mortar 15 mm thick for laying floor finishes complete all as specified & directed.
M & L for non skid coloured ceramic Colour tiles 7 to 8mm thick jointless (Square/rectangular) area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr in Charge
M & L for Glazed Coloured Ceramic tiles in vertical surface 350x250x7mm / 450x350x7mm thick jointless set and joint in neat cement slury and pointed in white or colour cement to match over and including 10mm thick plaster in CM 1:4 as backing coat to receive tiles complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar complete all as specified and directed.
M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white or coloured cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed
Dismantling plain or corrugated steal sheeting, any guage, thickness, including Nainital or similar pattern roof covering complete all as specified and directed
S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer board E-Board Classic to be fixed Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. fixed in ceiling flat or Sloping complete all as specified.
Taking down chowkats of frames with shutters (without taking off shutters from the frames) n exc 1.5.Sqm complete all as specified and directed.
M&L for taking down and refixing in same opening wood shutter exc 1 sqm but not exc 2.00 sqm including easing & adjusting and refixing with same hardware etc complete all as specified and as directed.
S&F 35mm thick 2nd class HW glazed skeleton shutters open rebated and prepared to receive glass gazed etc but divided into squares with plain chamfered or rounded mitred and rebated sash bar any numbers edges of framing plain chamfered or rounded fitted with cut and mittered beads for sceuring glass guage etc. size of members as specified in SSR pt-I section 8 clause 8.20(a) fitted to chowkhats etc complete all as specified and as directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified.
S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc (Min thickness of powder coating 50mm micron) complete all as specified
S&F anodised powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc (Min thickness of powder coating 50mm micron) complete all as specified
S&F 4mm figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane etc complete all as specified and as directed.
S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1mm and fixed with tinned tacks, or galvanised wire staples complete all as specified
S&F 140mm long floor door stopper of brass body and tongue with had drawn steel spring complete all as specified
S&F 30mm wide continuous (piano) hinges, mild steel, bright finish or electrogalvanised etc complete all as specified and as directed.
S&F 40mm dia cupboard /knobs fixed with nuts, screw and washer of mild steel bright finish.
S&F Magnetic Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified
S & F in repairs harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified
M&L for 18/19 mm thick block boards ,grade 2 quality ,interior grade ,commercial type with decorative face veneer on both face fixed with screw to timber frame work as in cupboardand kicthen cabnet etc complete all as specified and as directed.
M&L for 12 mm thick block boards ,grade 2 quality ,interior grade ,commercial type with decorative face veneer on both face fixed with screw to timber frame work etc complete all as specified and as directed.
S&F in repairs for hardwood IInd class weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps etc complete all as specified and as directed.
Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars , etc, but excluding ashlar facings, dressed stone-work complete all as specified and as directed by the Engineer-in-Charge.
M&L brick work with old size sub class 'B' bricks straight or curved on plant exceeding 6M mean radius built in CM 1:6 complete all as specified
M & L for brickwork with old size sub-class `B` bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:6 etc complete all as specified and as directed.
M & L rendering 15 mm thick in cement mortar 1:6 on fair faces of brick or concrete work even and smooth without using extra cement etc complete all as specified and as directed.
M&L for applying two coats of oil bound distemper over one coat of primer over a coat of 3mm thick wall care putty on new plastered surfaces of walls including preparation of new surface complete all as specified and as directed.
M&L for preparation of old plaster surface of wall and applying one coats of oil emulson complete all as specified.
Material and labour for preparation of new external surfaces of walls including cornices, plasters etc (Plastered or un plastered surfaces) and applying two coats of cement paint over one coat of primer complete all as per manufacture instructions all as specified and as diredted by Engineer-in-Charge .
M&L for preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil etc complete all as specified and as directed.
M&L RCC for nominal mix (1:2:4) type B-0 (using 12.5mm graded aggregate) as Slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like etc complete all as specified and as directed.
Formwork to soffits of suspended slabs as roof slabs, floor slabs, landinqs, lintel / chajja and similar work not exceeding 200 mm thick for fair finished surfaces of concrete complete all as specified and directed.
Mild steel TMT bars 8 mm dia and over, cut to length ,bent to shape and incl mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to etc complete all as specified and as directed.
M&L, for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all speciified and directed
All same as per item No 84 here-in-before but 5mm dia and over and including 10mm dia in stirrups spacers and binders complete all as specified and as directed
M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in benching, bed plates coping as manhols,drain and the like incl. form work and finishing all exposed surface of concrete etc complete all as specified and as directed.
M&L for cement concrete type D2 (1:4:8) (40mm graded stone aggregates) in surface channel and drains etc etc complete all as specified and as directed.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl forms , moulds mitred / stoped ends etc complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness below or above ground floors etc complete all as specified and as directed.
M&L 40 mm thick Plain Cement concrete type B-1(1:2:4) (using 20mm graded crushed stone aggregate) as in floor surfaces finished even and smooth without using extra cement all as speidied.
M&L for 75mm thick cement concrete type D-2 (1:4:8) (40mm graded stone aggregate) as in sub base complete all as specified and directed.
M & L for 25 mm thick Cement concrete type B1,1:2:4 (20mm graded aggregate) as in using sub-base etc complete all as specified and as directed.
Forming contraction (Dummy) joints 65 mm deep x 10 mm wide and filled with sealing compound of grade 'A' etc complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as directed.
S & F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc .Fe 410-gde -E250 quality-A etc complete all as specified and as directed.
S&F framed work such as grills, gratings, angle Iron etc. with ends of bars shouldered and /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; wal ways riailing etc of water tank s and similar work conforming to Fe 2990 Gde - E- 165 complete all as specified and directed.
M&L for framed work such as doors, gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding eith and including either hooks and hinges or steel hanging door fittings including bolts etc conforming to Fe 290 Gde-E-165 etc complete all as specified and as directed.
M&L for cement concrete type D2 1:4:8 (40mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out loose and soft soil compelete all as specified and directed
S & F in repairs 15 mm bore chromium plated bib taps fancy type cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed.
S/F in repairs 15mm bore dia of pipe stop valves, but fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both pipe or for unions and fixed complete all as specified and as directed by Eng-in-Charge.
S/F in repairs 15mm bore dia of pipe angle stop valves, but fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both pipe or for unions and fixed complete all as specified and as directed by Eng-in-Charge.
Cutting chases, pinning in, making good to facings of brick walls where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed water conduit wiring, etc., and making good, cutting not exc 10 cm girth etc complete all as specified and as directed.
Demolition and breaking up 110mm dia drain pipe (SGW), AC or PVC Pipe reinforced concrete set in mortar etc complete all as specified and as directed.
M&L for PCC 1:3:6 type C2 (using 40mm graded broken stone agg) as in bed in drain pipe 110mm dia bore incl packing under and haunching incl necessary shuttering against the sides of pipes after they are laid and tested all as specified and directed.
M & L 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and as directed.
S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and as directed.
S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls and floor etc complete all as specified and as directed.
S & F 110 mm bore PVC (SWR) bends of any radius etc complete all as specified and as directed.
S & F 75 mm bore PVC (SWR) bends of any radius etc complete all as specified and as directed.
S & F PVC (SWR) Floor/nihani trap of 75 mm outlet plain with grating including jointing with solvent cement etc complete all as specified and as directed.
M&L for preparation of new painted surfaces of steel of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide zinc crome complete all as specified and directed.
M&L for cement concrete type B0 using 12.5 mm graded aggregate in sunken floors 30mm thick complete all as specified.
S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm incl existing and taking down complete all as specified.
M&L Hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface etc complete all as specified and as directed.
M & L for 100 mm thick Cement concrete type B-2, 1:2:4 (40mm graded stone aggregate) as in floor finishes using extra cement for finishing cement concrete surface even and smooth etc complete all as specified and as directed.
M&L for sand cushioning layer under the floors and hand level surface including watering and consolidation to receive floor tiles etc complete all as specified and as directed.
M&L for Machine pressed precast conctete interlocking paver block vibro compacted rubber moulded with any colour cement and pigment any shape and size confirming to IS 15658-2006 of 100mm thickness, M-50 grade with grey cement and pigment. etc complete all as specified and as directed.
M&L for RCC Nominal Mix Type A1 1:1.5: 3 (using 20 mm graded stone aggregate) as in foundation, including rafts, footings, foundation beams; plinth beams; bases for coloumns, etc basement slabs under reamed piles and mass concrete complete all as specified and as directed.
M&L for RCC Nominal Mix Type A1 1:1.5:3 (using 20 mm graded stone aggregate)as in columns, pillars, piers, posts and struts complete all as specified and as directed.
M&L providing precast cement concrete louvers and jalies, 30mm thick (measured solid), type B-0 (12.5mm graded stone agg) including moulding but excluding frame and set in CM (1:4) complete all as specified and as directed.
RCC (1:1.5:3) type A-1 using 20mm graded stone aggregate as in band, coping, bed plate, benching etc including slightly rounded of chamfered angle, throating, etc complete all as specified and as directed.
M & L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and as directed.
M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc complete all as specified and as directed.
M & L Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed.
M&L preparation of new surfaces & applying two coats cement base paint over a coat of primer etc complete all as specified and directed.
Excavation in trenches in soft/loose soil not exc 1.5mtr wide and not exc 1.5 mtr deep for foundation etc or for manholes not exc 10 sqm on plan and exc 1.5 mtr but n exc 3 mtr in depth and getting out all as directed by Engr-In-Charge.
Excavation over areas n.exc 1.5m deep & getting out soft/loose soil etc complete all as specified and directed.
Excavation over areas exc 1.5m deep & n.exc 3 m deep and getting out in soft/loose soil etc complete all as specified and directed.
M & L Plain cement concrete (1:3:6) Type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete all as specified.
M & L for brick work in cement mortar 1:4 with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius with old size brickscomplete all as specified.
Material and labour for brickwork with sub class `B' bricks in one brick thick honey comb walling, built in cement mortar 1:3 etc complete all as specified and directed.
M&L for loose filling with broken bricks aggregate of gauge 40 to 80mm in soakage pits, soakage wells etc complete all as specified and directed.
M & L for rendering in 15 mm thick in cement mortar 1:4, on fair faces of brick work, finished even and smooth without using extra cement complete all as specified.
M & L for PCC (1:3:6) type C-2 using 20mm graded aggregate as in coping including necessary form work all as specified and directed
M & L for precast cement concrete 1:2:4 type B-1 using 20mm stone aggregate as in manhole cover slabs round square or rectangular in shape and set in CM 1:4 etc complete all as specified and directed.
S & F 75mm dia PVC (SWR) vent cowl complete all specified and as directed.
Supply & fix 150mm dia PVC (SWR) pipes single/double socketed in any length with rubber ring joints, laid in trenches or in floors and jointed as specified.
M&L for PCC 1:3:6 type C-2 (40mm grade stone aggregate) as in bed to 150 mm dia SGSW /PVC pipes including packing under and haunching against the sides of pipes after they are laid and tested.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm In soft/ loose soil.
Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point,in soils.
M & L for non skid coloured ceramic Colour tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 etc complete all as specified and directed.
S/F for joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated confirming Fe 410-W (Gde-E- 250) quality- A etc complete all as specified and directed.
S/F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410 -W (Gde-E- 250) quality-B etc complete all as specified and directed.
S/F 2nd class hard wood scantling as in purlins rafters & framed work etc clean sawn complete all as specified and directed.
S/F for Pressed steel frames (1.25 mm thick MS Sheet) of 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.
M&L for 35 mm thick 2nd class hardwood plain framed pannelled shutter (any number of panels) with panels of timber flat on both sides or of veneered particle board medium density , wood particle board with commercial face veneers , supplied and fitted to chowkats complete all as specified and directed.
S&F 40 mm flap width of Continuous (piano) hinges, mild steel, bright finish or electro galvanised etc complete all as specified and directed.
S & F external teak wood lipping, 6mm thick, fixed with nails complete all as specified and directed etc complete all as specified and directed.
M&L for 75mm Aluminium handles, cast type, anodised complete all specified & directed.
S&F 150mm long aluminum hook and eye, complete all as specifed and directed etc complete all as specified and directed.
Excavation in trenches in soft/loose soil not exc 1.5mtr wide and not exc 1.5 mtr deep for foundation etc or for manholes not exc 10 sqm on plan and getting out soft/loose soil all as directed by Engr-In-Charge.
M&L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil bound distemper of approved shade/tint all as specified.
M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces and applying two coats of cement base paint of approved shade on walls all as specified and directed by Engineer-in-Charge
M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
M&L for preparation of old steel surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint all as specified & directed.
Refixing of old steel tubing and connections in new or old position with new fittings to floor, wall or ceiling as directed, for 15mm bore GI tubing.
S&F in repairs for 15mm dia of pipe bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed.
S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms)
S&F in repairs for Draperly rod /Harrison rails of CP of 20mm dia with fixing brackets , stops, rollers and rings etc.
S&F for 4 mm thick veneered decorative Plywood (no of ply 05), grade-I (with BWR resin) with decorative face veneers on one face, fixed with screws to timber frame work complete all as specified and directed.
M&L second class hardwood plain fillets exc 13sqcm and not exc. 25sqcm, square or rectangular in section, wrought, secured with nails or brads.
Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.
M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and as directed.Make:- Richa/Finolex/Havells/RR Kabel Make of caping/casing & PVC boxes :- Prestoplast/Finolex/supreme/Richa
One light/Fan/Call bell point controlled by one, one way switch .
One 3 pin socket outlet 5 Amps on the same board with other switches.
One 3 pin socket outlet 5 Amps on the switch socket combination.
All as per item No- 164 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
All as per item No- 164 here-in-before but with 4.0 Sq mm for AC point controlled by one and 4.0 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
M&L for Switch piano flush type single pole, one way 5 Amp. Make:- Havells/Legrand/Anchor
M&L for Socket outlet, 2 in 1, 3 pin 5A flush typeMake:- Havells/Legrand/Anchor
M&L Switch socket combination 2 in 1, 5A flush type Make:- Havells/Legrand/Anchor
M&L Switch socket combination 2 in 1, 5A/16A, 5 in 1 flush type Make:- Havells/Legrand/Anchor
M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and directed. Make:- Havells/Legrand/Achor
M&L for stepped type electronic fan regulator 100/120 Watt socket size flush type on the existing phenolic laminated sheet etc.Make:- Havells/Legrand/Achor
S&F for , LED Light fitting 1 x 20 watt (4 Ft), Wall/ Surface mounted, intergrated type with all accessories internally prewired and incl connecting up with and incl twin/ three core twisted flexible copper conductor cable of suitable size in and incl flexible hose from ceiling rose to fitting complete all as specified and as directed. Make : Crompton/Bajaj/ Philips/Havells
M&L for 09 Watt LED, 2', Wall mounted decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified and as directed. Make : Crompton/Bajaj/ Philips/Havells
Supply , fixing and testing in replacement of LED Street light fitting of capacity 20 watts, CRI > 70, Power factor > 1.95, colour temp 5700 K, Luminous effieciency not less than 100 lumen/watt, 6000 Lumens output, IP-66 protection including electronic driver (SMPS based constant current supply with < 10% THD, output open/short circuit protection, phase to phase protection, over voltage protection, surge voltage protection etc) unit suitable for working volt 140-270 V AC, 50 Hz, pressure die cast aluminium housing and finishing epoxy white powder coated grey colur after phospho chromate treatment with all accessories and connecting up complete and all as specified and directed by Engr-in-Charge. (Note : Test certificate in support of the technical parameters of the light fittings is to be submitted in original to the Engr-in-Charge by the contractor.) Make : Crompton/ Havells/Bajaj/ Philips.
M&L for decorative wall mounted light fitting made up of polycarbonate including 9 watt LED lamp with B-22 base complete all as specified and directed. Make : Crompton/Bajaj/ Philips/Havells
Supply and fixing LED luminaire 600 mm x 600 mm, 40/42 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.Make : Crompton/Bajaj/ Philips/Havells
Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make : Crompton/Bajaj/ Philips/Havells
M&L for VTPN 4 way,double door 415 Volts, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity MCB DBs incl taking down of DBs complete all as specified and as directed. Make : Legrand/ABB/Siemens
M&L for MCB TPN 63 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed. Make : Legrand/ABB/Siemens
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed.
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate NRV, connection piece etc complete all as specified and as directed. Make : Havells/Crompton/Bajaj
M&L for DPX 4 Way thermal magnetic including MCCB of 160 Amps 4 pole of 25 kA 415 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed. Note : shall be measured and paid seperately ivalent in ABB/Siemens
M&L for MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA taking down old unsv MCB complete all as specified and as directed.
M&L for MCB Distribution board double door type SPN 12 way, sheet steel, powder painted, with copper bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed. Make:- Legrand/ABB/Siemens
All as per item No- 187 here-in-before but MCB SPN 8 way complete all as specified and as directed. Make:- Legrand/ABB/Siemens
All as per item No- 187 here-in-before but MCB SPN 4 way complete all as specified and as directed. Make:- Legrand/ABB/Siemens
Supply and fixing MCB SPN 40-63 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning incl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand/ABB/Siemens
Supply and fixing MCB SPN 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning incl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand/ABB/Siemens
Supply and fixing MCB SP 6-32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning incl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand/ABB/Siemens
M&L for metal clad AC socket point single pole and neutral enclosure with a tow pin and earth plug and socket complete with one single pole MCB SP 20 Amps complete all as specified and as directed. Make:- Legrand/ABB/Siemens
Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Richa/Finolex/Havells/RR Kabel Make of caping/casing :- Prestoplast/Finolex/supreme/Richa
Taking down Exh/Ceiling fan of any sweep carefully from its installed position, dismantling complete, cleaning all dust, applying grease for bearing, including filling cavaties with filler, after cleaning all dust, reassembling the fan and blades, hanging/ fixing the fan in its original position and testing on completion complete all as specified and as directed.
Taking down and refixing geyser 25/50 Ltrs Capacity including 04 Nos anchor bolts, hut/cold connection pipe etc complete all as specified and as directed.
Taking down burnt unsv LT UG cable of any size and M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 4 core complete all as specified and as directed. (NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.)
All as per item No 197 here-in-before but 16. Sqmm 2 Core complete all as specified and as directed. (NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.)
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft/ loose soil complete all as specified and as directed.
Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all complete all as specified and as directed.
Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all complete all as specified and as directed.
M&L for spread fine river sand in trenches complete all as specified and as directed. NOTE: For measurement purpose, punned down thickness shall only be taken.
M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed
Supply & laying tubes 'Light grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings for protection of cable with MS clamps and nut bolts etc of size 40 mm dia bore including taking out unsv GI tubing complete all as specified and as directed. Make:- Jindal/TATA/Prakash surya
Material & labour for cutting/ digging of existing Hard surface of cement concreet/Bituminous road of size not less than 45 cm in width and 20 cm deep for laying of GI/CI pipe & making good to the disturbed surfaces by providing PCC or same material after laying of pipe line and returning filling of soil complete all as specified and as directed.
Material & Labour for earthing with galvanised steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead strip 32x6mm by means of bolts, nuts check nuts and washers of galvanised iron or steel as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified orindicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1, RCC (1:1.5:3) type A1 precast cover (54cmx54cmx5cm) duly reinforced with including 8 mm dia TMT bar @ 150mm c/c both ways, one lifting handle made of 8mm dia TMT bar, embeded in precast cover slab, funnel, 20mm dia GI medium grade watering pipe, 15mm dia GI light grade earth lead protection pipe, chorcoal and common salt in alternatee layer complete all as specified and directed by Engr-in-Charge.
SHRI VIKASHE ZHIMOMI
commercial enterprises
Rameshwar Prasad
SHRI MADAN SINGH
Shri Atoshe Tuccu
KAILASH KUMAR LADHA
das enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .