SPECIAL REPAIR TO DEPOT PERIMETER SECURITY WALL OF 4 ASD AT NAGROTA MIL STN UNDER GE NAGROTA

Amount

Dismantling of barbed wire fencing of any description and in any position, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description and in any position, complete all as specified and as directed.

Demolition of brick work built in cement mortar of any description including all quions, arches, pillars, etc complete all as specified and directed.

Demolition of cement concrete(un-reinforced) in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MoD land, complete all as specified and as directed .

Excavation in trenches n exc 1.50mtr wide and n exc 1.50m in depth and getting out hard and dense soil from defence land complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone agg) as in foundations, filling and mass concrete complete all as specified and directed

M & L for TMT bars 10mm dia and over cut to length bent to shape required including, cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to IS:1786 complete all as specified and as directed

M & L for TMT bars 6mm dia and over upto and including 10mm dia as in stirrups, spacers and binders and binding with MS wire not less than 0.9mm dia (annealed) conforming to IS:1786, complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter finished fair complete all as specified and as directed

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. finished fair complete all as specified and as directed

Formwork to sides of pillars, posts, struts, piers, columns and stanchions finished fair complete all as specified and as directed

M&L RCC M-25 (design Mix) using 20 mm graded stone aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed

M&L RCC M-25 (design Mix) using 20 mm graded stone aggregates as in columns, pillars, piers, posts and struts complete all as specified and as directed

M&L RCC M-25 (design Mix) using 20 mm graded stone aggregates as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed

Returning, filling in hard dense soil including spreading, levelling, watering & well ramming in layers n exc 25cm thick complete all as specified and directed

Removal of excavated material (soil) to a distance exc 250m but n exc 500m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and as directed by Engineer-in-charge.

Material & labour for brick work with sub class ‘B’ bricks, straight or curved on plan, exc. 6 metre mean radius built in CM(1:6) complete all as specified and directed.

M & L for Brick work (Except brick received from demolition) with sub class B modular bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 in any position complete all as specified and as directed.

S&F MS angles as in horns of posts, wall including cutting at top to shape as directed including necessary drilling holes, notching for wire, bolting or welding etc complete all as specified conforming to Fe 290 Gde-E-165 complete all as specified and directed.

M&L rendering 15mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new plastered surfaces of wall and applying two coats of cement based paint complete all as specified .

M&L for preparing new or previously untreated steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a priming coat of red oxide zinc chrome primer complete all as specified and directed.

S & F Galvanized, 2 strand, steel barbed wire 2.24 mm dia, barbed with 2 mm dia, barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc., as directed.(each line of wire to be measured)

M&L for providing and fixing concertina coil fencing with punched tape concertina coil 600mm dia 10 metre openable length (total length 90 mtr), having 50 Nos rounds per 6 metre length, spring core wire (2.5 mm thick) of high tensile strength of 165 Kg/Sqmm with tape (0.52mm thick) and weight 43.478 gm/ metre and fixing the same with existing Y-shaped angle iron placed 2m apart and with 6 horizontal R.B.T (Reinforced Barbed Tape) wire, stud tied with G.I staple and GI clips to retain horizontal, including necessary bolts complete all as per direction of Engineer-in-Charge. Note:- Make of concertina coil shall be approved by GE.

S & F 110mm bore PVC pipe(SWR) as in weep holes complete all as specified

S&F MS framed work as in grills, gratings or gates of angle or other section with necessary welding, bolting, riveting etc complete drilled for fixing of steel sheet or other covering , etc to be prepared for hanging or sliding with and including either hooks hinges including fastening and fixing complete as directed by Engr-in- charge

Note:- Schedule of credit Rs. 10,864.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

M/S VINAY KUMAR SHARMA

ASHWANI KUMAR KHAJURIA AND SONS

BHARTI CONSTRUCTIONS

R.K. Works