Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.2 LAccepted-AOC 47 C MODEL TOWN EXTENSION LUDHIANA PB | LUDHIANA | PUNJAB | 141001 | L1 | Accepted-AOC DUE TO LOWEST BID. | |
| 2 | L2₹15.3 L+₹1.6 L (11.9%)Rejected-Finance | L2 | Rejected-Finance DUE TO HIGHER BID. |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
29 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (WEST) FEROZEPUR CANTT
GE (WEST) FEROZEPUR CANTT
REPAIR MAINTENANCE OF OFFRS MD ACCN AND OFFRS MESS UNDER AGE B R II OF GE (WEST) FEROZEPUR CANTT
2023_MES_591435_1
802023/GE-14/E8
Open Tender
Civil Works
Item Rate
180 days
FEROZEPUR CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (WEST) FEROZEPUR CANTT
₹40,000
Yes
24 Jul 2023
3 Jun 2023
1 Jul 2023
3 Jun 2023
29 Jun 2023
17 Jun 2023
Amount
Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L 15 mm thick rendering in cement mortar 1:6 on brick work/ RCC wall and finish the surface fair and even without using extra cement complete all as specified and directed.
M&L 15 mm thick rendering in cement mortar 1:4 on other than fair faces of brick/concrete work surfaces finished even and smooth (without using extra cement) complete all as specified and directed or as per manufacturer's instructions.
M&L 5 mm thick rendering in cement mortar 1:3 on ceiling surfaces and finish the surface fair and even without using extra cement complete all as specified and directed.
M&L preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified & directed.
M&L preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant primer over a coat of 1 mm thick wall care putty complete all as specified and directed.
M&L preparation of new wall surfaces and applying two coats of colour wash over one coat of white wash complete all as specified and directed.
M&L preparation of old decorated surfaces (plastered or unplastered) of walls including brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil, greasy spots and apply one coat distemper oil emulsion on walls complete all as specified and directed.
All as per ser item No. 08 here-in-before but two coats of distemper oil emulsion.
All as per ser item No. 08 here-in-before but one coat of white wash on ceiling surface.
All as per ser item No. 08 here-in-before but one coat of white wash on wall surface.
All as per ser item No. 08 here-in-before but one coat of colour wash on wall surface.
All as per ser item No. 08 here-in-before but one coat of cement based paint on wall surface.
M&L preparation of old painted wooden surfaces, of any description, not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.
M&L preparation of old painted steel surfaces, of any description, not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.
M&L complete removal of existing treatment and applying two coats of oil bound distemper over a coat of primer over 3mm thick (average) wall care putty applied in two coats including rubbing with siutable sand paper achiving smooth surfaces complete all as specified and directed.
Taking up or down steel tubing and connection 15 mm dia bore complete all as specified and directed.
Taking up or down steel tubing and connection 20 mm dia bore complete all as specified and directed.
Fixing only, after cleaning old steel water tubing, 15 mm dia bore and connections in new or old position using new fittings complete all as specified and directed. Notes:-servicable pipes obtained from item 17 shall be reused and cost of new fittings, if required shall deemed inclusive of quoted rates.
Fixing only, after cleaning old steel water tubing, 20 mm dia bore and connections in new or old position using new fittings complete all as specified and directed. Notes:-servicable pipes obtained from item 18 shall be reused and cost of new fittings, if required shall deemed inclusive of quoted rates.
S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
S&F GI tubing 20mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
S&F in repair vitreous China wash down water closet pan (pedestal pattern) white, including trap, connection to drain and flushing pipe including seat cover for pedstal pan complete all as specified and directed.
S&F vitreous China squatting pan, Orissa patteren, size 580 mm x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) in repair complete all as specified and directed.
S&F vitreous China wash basin white, flat back,size 550 mm X 400 mm including cutting for pinning in ends of brackets in repair complete all as specified and directed.
S&F 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of required size in repairs complete all as specified and directed.
S&F 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, both ends screwed for iron pipe or for unions in repair complete all as specified and directed.
S&F 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions in repair complete all as specified and directed.
S&F PVC connection 15mm size PTMT nuts of length 450 mm in repair complete all as specified and directed.
S&F 15 mm bore fancy type bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule, in repair complete all as specified and directed.
S&F 15 mm bore fancy type wall mixer with 115 mm long bend pipe for connection to aerator, in repair complete all as specified and directed.
S&F fancy type 15 mm bore central hole basin mixture with 'U' shaped round casted spout with 3" long pipe connection with aerator in repair complete all as specified and directed.
S&F 15 mm bore fancy type health faucet with SS hose, in repair complete all as specified and directed.
S&F fancy type chromium plated towel rail 60 cm long in repair complete all as specified and directed.
S&F chromium plated towel ring in repair complete all as specified and directed.
S&F chromium plated soap dish complete all as specified and directed.
S&F chromium plated toilet paper in repair complete all as specified and directed.
S&F 15 mm bore 100 mm dia overhead shower single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 240 mm long(light weight) round shape with wall flange in repair complete all as specified and directed.
S&F 15 mm bore Piller taps cast copper alloy,with capstan heads,chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts in repair complete all as specified.
S&F PVC cabinet mirror of size 450mm X 600mm in repair complete all as specified and directed.
S&F water closet seat cover any coloured pattern with flat bottom and mild steel chromium plated or aluminium hinging devices, in repair complete all as specified and directed.
S&F sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410 mm x 330mm x 160mm in repair complete all as specified and directed.
S&F in repairs stainless steel sinks made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers& waste pipe, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm X 420mm with bowl size 410mm X 330mm X 160mm complete all as specified
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples in repair complete all as specified and directed.
Hacking out old broken glass (any thicknesss, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 sqm each pane complete all as specified and directed.
S&F 3mm thick figured glass pin headed ordinary quality and glazing with oil putty in square not exceeding 0.50 sqm each pane complete all as specified and directed.
Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the premises complete all as specified and directed.
M&L Non-Skid coloured ceramic tiles 7mm to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
M&L Non-Skid ceramic tiles 7mm to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
All as per ser item No. 51 here-in-before but in skirting including rendering 10 mm thick on fair faces of brick work in cement mortar 1:4 to receive wall tiles etc complete all as specified and directed.
M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
All as per ser item No. 53 here-in-before but in skirting including rendering 10 mm thick on fair faces of brick work in cement mortar 1:4 to receive wall tiles etc complete all as specified and directed.
M&L glazed tiles digital coloured ceramic tiles 300mm X 450mm X 7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match over and including rendering 10 mm thick on fair faces of brick work in cement mortar 1:4 to receive wall tiles etc complete all as specified and directed.
M&L Glazed ceramic tiles in vertical surface 300mm X 200mm and 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including rendering 10 mm thick on fair faces of brick work in cement mortar 1:4 to receive wall tiles etc complete all as specified and directed.
S&F 20 mm dia decorative type curtain rods chromium plated anodised aluminium alloy fixed in repair complete all as specified and directed.
S&F fancy type powder coated aluminium bracket for curatin rod suitable for 20 mm dia pipe fixed in repair complete all as specified and directed.
S&F 100 mm butt hinges medium weight cold rolled stainless steel fixed in repair complete all as specified and directed.
S&F 75 mm butt hinges medium weight cold rolled stainless steel fixed in repair complete all as specified and directed.
S&F aluminium anodised 200 mm barrel tower bolts of extruded section complete all as specified and directed.
S&F aluminium handle 150 mm cast type anodised complete all as specified and directed.
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
Taking down shutters of any description not exceeding. 1.00 sqm each complete all as specified and directed.
Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each complete all as specified and directed.
Taking down Chowkhats or frames exceeding 1.50 sqm but not exceeding 4.00 sqm each complete all as specified and directed.
Taking down Chowkhats or frames with shutters (without taking of shutters from the frame) not exceeding 1.50 Sqm each complete all as specified and directed.
S&F factory made pressed steel frames of size 105 mm x 65 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.
S&F factory made pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.
M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in hold fast, bed plates, fillling of pressed steel chowkhats and all other similar works complete all as specified and directed.
S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19mm x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15mm x 15mm MS square tube inside 19mm x 19mm MS square tube suitably screwed complete all as specified and directed.
S&F 35mm thick factory made 2nd class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.
S&F 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panel, commercial type on both side complete all as specified and directed.
S&F 30mm thick factory made 2nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge, etc sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) and fitted to chowkhats complete all as specified and directed.
S&F 30mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of MS tubes of size 15mm x 15mm for top and bottom rails and 19mm x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified and directed.
S&F 18 mm to19 mm pre-laminated particle board, interior grade, pre-laminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cup borad & kitchen cabinet shutters and all other similar works fixed in repairs complete all as specified and directed.
S&F 100 mm butt hinges medium weight cold rolled stainless steel complete all as specified and directed.
S&F 200 mm barrel tower bolts of aluminium anodised extruded section complete all as specified and directed.
S&F 75 mm barrel tower bolts of aluminium anodised extruded section complete all as specified and directed.
S&F 150 mm cast type anodised aluminium handle complete all as specified and directed.
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
Resecuring or easing & adjusting, without taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm complete all as specified and directed.
M&L preparation of new wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F mild steel work in hold fasts, wall ties, pintle hinges and all other similar small articles conforming to Fe-290 (Gde-E-165) complete all as specified and directed.
Dismantling brick tiles or terracing tiles laid in single layer on roofs jointed and pointed in cement mortar complete all as specified and directed.
Demoletion of mud phuska in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.
M&L 10 mm thick screed plaster in cement mortar 1:4 finished even and smooth without using extra cement on top of roof complete all as specified and directed.
M&L applying tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per sqm including cleaning surfaces complete all as specified and directed.
S&F 150 micron polythene film including preparation of roof surfaces complete all as specified and directed.
M&L 80 mm thick average consolidated thickness, mud phuska on flat roofs including 25 mm thick mud plaster but excluding 3mm leeping complete all as specified and directed.
M&L 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar 1:3 mixed with 5 % of crude oil by weight of cement on mud phuska and pointed flush as work proceeds complete all as specified and directed.
M&L except tiles for 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar 1:3 mixed with 5 % of crude oil by weight of cement on mud phuska and pointed flush as work proceeds complete all as specified and directed. Note:- Old serviceable brick tiles retreived by dismantling of treatment vide item No. 85 here-in-before to be reused.
Demolition of cement concrete in ground floor & paving not exceeding 15 cm thick (below or above GL) unreinforced complete all as specified and directed.
M&L 75mm thick, PCC 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site complete all as specified & directed.
M&L 20mm thick machine cut, granite (of any colour) bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform, flooring and all other similar works over and including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
S&F 16mm-18mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size not exceeding 0.5 sqm area fixed with and including one number SS clamps (grade - 202) of flat-30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment fixed in repairs complete all as specified and directed.
M&L 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc. complete all as specified and directed
M&L crushed sand filling under precast interlocking paver blocks and all other similar works complete all as specified and directed.
M&L machine presssed precast concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment laid over sand cushning including compaction of paver blocks using surface vibrator all as specified and directed. Note:- Sand cushioning shall be measured and paid separately.
M&L providing cement concrete type B-1, 1:3:6 (using 20 mm graded crushed stone aggregate) as in rounded or chamfered on edges of paver blocks / chequered tiles or sides of path / hardstanding ,roof kerbing and mud stops etc. complete all as specified and as directed.
Dismantling PVC water tanks capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and directed.
Dismantling PVC water tanks capacity exceeding 500 litres but not exceeding 1000 litres complete all as specified and directed.
M&L 500 ltrs capacity rotational moulded triple layered polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.
M&L 1000 ltrs capacity rotational moulded triple layered polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.
Demoletion and breaking up drain pipes upto 110 mm dia (Salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar complete all as specified and directed.
M&L cutting holes in brick walls built in cement morter for taking out/ inserting of CI/PVC/AC Pipes/ Branch pieces of dia not exceeding 110 mm hold fasts etc exceeding half brick but not exceeding full brick wall complete all as specified and directed.
S&F 110 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls complete all as specified and directed.
S&F 110 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes laid in trenches including making good to the excavated surfaces complete all as specified and directed.
S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls complete all as specified and directed.
S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes laid in trenches including making good to the excavated surfaces complete all as specified and directed.
S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed.
All as per ser item No. 112 here-in-before but with access doors complete all as specified and directed.
S&F 110 mm dia PVC (SWR) bends complete all as specified and directed.
S&F 110 mm dia PVC (SWR) bends with access doors any radius complete all as specified and directed.
S&F 110 mm dia PVC (SWR) junction single, (single T) equal or uequal provided with access door complete all as specified and directed.
S&F 110 mm dia PVC (SWR) vent cowl complete all as specified and directed.
Demolition of ceiling boards of any description, and any thickness including cover fillets and frame work complete all as specified and directed.
M&L Anodised aluminium snap grid frame work for false ceiling complete all as specified and directed. Note:- The quoted rate shall include the necessary notching and preparing of holes. Supporting hanger comprising of mild steel rod, bolts with necessary washer, nuts, bolts etc. required for securing framework to ceiling and to the snap grid.
M&L 6 mm thick fancy designed exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid complete all as specified and directed. Note:- Frame work for ceiling shall be measured and paid for separately.
S&F 5mm thick printed coloured PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site with aluminium corner , top and bottm angles/ mouldings etc fixed in repair complete all as specified and directed.
S&F Door closer of aluminium dia cast body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851mm to 1000 mm in width and of weight between 61Kg to 80 kg and fixed in repair complete all as specified and directed.
M&L disconnecting existing tanks exceeding 250 litre but not exceeding 500 litre capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified. Note:- Bleeching powder to be spread in the bottom of tank before fixing / installing in position and cost of bleeching shall be deemed inclusive of quoted rate.
M&L disconnecting existing tanks exceeding 500 litre but not exceeding 1000 litre, capacity setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed. Note:- Bleeching powder to be spread in the bottom of tank before fixing / installing in position and cost of bleeching shall be deemed inclusive of quoted rate.
S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed.
S&F Grating round 140 mm size of PTMT. (Minimum weight 50gms) complete all as specified and directed.
All as per ser item No-125 here-in-before but with waste hole of PTMT. (Minimum weight 100gms) complete all as specified and directed.
S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore dia of outlet of pipe in repairs complete all as specified and directed.
Taking down carefully copper /aluminium point wiring (light, fan, socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keetping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. to match with the existing specifications complete all as specified and directed.
M&L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including new rigid non-metallic PVC conealed conduit, with all accessories if require such as bends, reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards/round blocks (for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch.
(b) One socket outlet on the same board controlled by one single pole one way switch.
(c) One 5 Amps socket outlet independent controlled by one single pole 5 Amp switch.
All as per ser item No. 130 here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.
All as per ser item No. 130 here-in- before but existing conduit and existing Ms pressed steel/ cast iron box complete all as speicifed and directed. (a) One light point/fan/bell point controlled by one single pole one way switch.
(c) One 5 Amps socket outlet independent controlled by one single pole 5 Amp switch.
All as per item No - 133 above but existing conduit and existing Ms pressed steel/ cast iron box.
S&F Switch piano flush type single pole one way 5/6 Amp complete all as speicifed and directed.
S&F Switch piano flush type 15 Amps, single pole one way duly ISI marked complete all as speicifed and directed.
S&F Socket outlet 2 in one , 5/6 Amps flush type ISI marked complete all as speicifed and directed..
S&F Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type ISI marked complete all as speicifed and directed.
S&F Ceiling rose surface type, PVC/polycarbonate, isolated, bakelite 65mm x 50mm, 3 terminals ISI marked complete all as speicifed and directed.
S&F Lamp holder insulated body threaded dome pattern, suitable for bracket / batten fitting complete all as speicifed and directed.
S&F stepped type electronic fan regulater flush, socket type on the existing phenolic laminated sheet etc. as required complete all as speicifed and directed.
S&F bell push piano flush type 5 Amps single pole duly ISI marked complete all as speicifed and directed.
S&F bell ding dong AC 230 Volts single pole complete all as specified and directed.
S&F Modular Bell push 6 Amp, 1 module complete all as specified and directed.
S&F in replacement of existing Modular Switch one way 6 Amp, 1 module complete all as specified and directed.
S&F in replacement of existing Modular Switch one way 16 Amp, 1 module complete all as specified and directed.
S&F in replacement of existing Modular Socket 6 Amp - 2/3 pin combined 2 module complete all as specified and directed.
S&F in replacement of existing Modular Socket 6 Amp/16 Amp - 2/3 pin combined 2 module complete all as specified and directed.
S&F in replacement of existing Modular white cover plate with frame, 1 module complete all as specified and directed.
S&F in replacement of existing Modular white cover plate with frame, 2 module complete all as specified and directed.
S&F in replacement of existing Modular white cover plate with frame, 3 module complete all as specified and directed.
S&F in replacement of existing Modular white cover plate with frame, 4 module complete all as specified and directed.
S&F in replacement of existing Modular white cover plate with frame, 6 module complete all as specified and directed.
S&F in replacement of existing Modular white cover plate with frame, 8 module complete all as specified and directed.
S&F in replacement of existing Modular step type regulator, 120 Watt - 2 module complete all as specified and directed.
S&F LED Bldg Security light fitting 35 Watt 230 Volt AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
S&F in replacement of Plastic Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230Volt, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed.
S&F in repair sheet metal enclouser SPN DB's 8 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 Volts 200 Amps rated enameled bus bar 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed.
All as per ser item No. 159 here-in- before but SPN DB's 4 way.
S&F in repair sheet metal enclouser DB's TPN 4 way double door (Vertical Type) factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 415 Volts 200 Amps rated enameled bus bar 4 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surfaces and colour matching complete all as specified and directed.
S&F MCCB 63 Amps 415 Volts 16KA breaking capacity complete all as specified and directed.
S&F MCB TPN 415 Volts 63 Amps, 10 KA breaking capacity complete all as specified and directed.
S&F MCB single pole neutral (SPN) 240 volts, 40 Amps, 10 KA complete all as specified and directed.
S&F MCB single pole (SP) 240 Volts, 6 to 32 Amps, 10 KA complete all as specified and directed.
S&F in repair sub main wiring of 6 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 6.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia complete all as specified and directed. Note:-Two run of single core 6 sqmm cable and one run single core 6.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length).
S&F LED lights fitting 1x 20Watt, 220 Volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Makes: Havells Cat Part No. LHEXBLP7PN1W020 or techno-commercially equivalent in approved makes.
S&F in repair LED tube light fitting 9 Watts batten type fixed on wall/ ceiling etc. including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed. Makes: - Cat Part No LHEXBLP7IN1W009 of Make - Havells or techno-commercially equivalent in approved makes
S&F LED luminaire 600 mm x 600 mm, 35/36 Watt, 220 Volt AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. Makes: Crompton Cat Part No. LCTLRN-36-FO-CDL or techno-commercially equivalent in approved makes.
M/S N Maini Constrution
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .