Modern Slaughter House Maintainance and repair works in vickramasingapuram Municipality

Plain cement concrete 1:2:4 ( one cement, two sand, and four coarse aggregate ) using 20 mm ISS hard broken granite stone jelly for all plain cement concrete works excluding cost of shuttering, and centering including all labour charges and incidental charges for cost and conveyance of all materials to work site, mixing and laying concrete, finishing the surface nearly rough, compacting using vibrators, curing etc., complete complying with standard specification

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials, labour charges and and all other incidental charges therefore etc complete as per standard specification.

White washing two coats using best shell lime including cost materials and all labour charges and all other incidental charges therefore etc complete as per standard specification.

Painting with ready mixed enamel paint for doors, windows and ventilatots, iron bars, weld mesh wire mesh, screen, steel bars, flats and other similar works etc., with two coats of approved first quality of synthetic enamel paint over the existing red oxide primer in all floors. The rate is inclusive of cost of all materials and labour, brushes and scalffolding charges etc. complete complying with standard specification (the paint to be used should be get approved by the engineer before use on work ) Asper doors and windows areas

Supply and fixing of ISMC 100 medium size necessary supporting from roof slab 9vertical support at every 1m intervals and 1.5m below roof sla with satinless steel hook (16mm dia) 2nos per R.M necessary provisions for pulling including all painting etc and as per directed by the engineer incharge.

Main gate/Service gate 4.50 x 1.50m high openable both inside/out side with all necessary fitting and providing vicat gate withone coat primer and over two of enamel paint etc complete including cost and conveyance of all materials, labour charges and and all other incidental charges therefore etc complete as per standard specification.

Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathedCu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator). (SD-24)

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x l00 x for open PVC plug point.inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for PVC Plug Point (SD-36)

Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable pipe on wall and ceiling with PVC accessories with 150 mm x 100 mm x 63mm TW switch box for 15 A 3 pin non inter locking CS plug with painting of suitable colour, with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point. (SD-39)