Execution of Shifting and Maintenance of Street Light Pole on Temple Road, Rajbari Math and other different Places within Tarakeswar Municipality.

Re-straining 8 SWG to 6 SWG GI continuous earth wire without earth clamp [PWD, S-o-R(Elect. Work), Vol.-I, Page-I-1, Item- 4]

Replacing Galv. (Hot Dip) MS earth clamp 380x25x3 mm size complete with bolts and nuts etc. as required on pole (as per specification)for fastening earth wire incl. painting [PWD, S-o-R(Elect. Work), Vol.-I, Page-I-1, Item- 6]

Providing anti-climbing device with galv. Barbed wire, 4 barbs/76 mm apart around pole/stay upto required height (apporximately 1.2 mt.) [PWD, S-o-R(Elect. Work), Vol.-I, Page-I-1, Item- 7]

Replacing staywire with 7/10 SWG GI (Hot Dip) stranded Wire (45 Ton quality) incl. S & F GI thimble and making off binding at both ends [PWD, S-o-R(Elect. Work), Vol.-I, Page-I-1, Item- 9]

Dismantling steel tubular/Rail/Strut embedded in CC foundation incl. excavation, filling of holes, restoring surface, loading at site and delivering, unloading, sorting, stacking properly at any placeas per direction upto a lead of 1.6 km. [PWD, S-o-R(Elect. Work), Vol.-I, Page-I-2, Item- 14]

Providing CC (6:3:1) muffing 600x600x760 mm in size or equivalent size of cylindrical muffing above ground level around the pole base complete with 3 mm thick neatly finished cement plaster all round after dismantling the unserviceable muffing if necessary(b) With 250x250x100 mm 16 SWG GI Loop Box[PWD, S-o-R(Elect. Work), Vol.-I, Page-I-1, Item- 12(b)]

Fixing outdoor type fluorescent/SV/MV light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated and sheathed wire (single core) from loop box at the base of pole to light fiting through pole & bracket (without control switch) including making connections & painting [PWD, S-o-R(Elect. Work), Vol.-I, Page H-5, Item- 4]

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly. Upto 9.0 mtr. Size 0.6x0.6x1.70 mts[PWD, S-o-R(Elect. Work), Vol.-I, Page-H-1, Item- 1(a)]

2 Welding in M.S. structural work with gas or electric:(a) Tack weld [PWD, S-o-R(Building Work), Vol.-I, Page-111, Item- 2(a)]

Renewing bottom curved Plate of M.S. flat with necessary clamps under the curved M.S.flats and fixing them after cutting holes with cement concrete (1:2:4) with stone chips and mending good damages. (i) 50mm x 6 mm M.S. flat [PWD, S-o-R(Building Work), Vol.-I, Page-112, Item-18(a)]