ADDN/ALTN TO BLDG NO P-35-37 OF COOK HOUSE AND PROVN OF GEYSERS AND HIGH MAST LIGHT WITH 15 METER LONG PIPE AND CONNECTED ITEM AT NABHA UNDER GE (S) PATIALA

Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 15mm thick cement pastering in cement mortar 1:4 and mixig the water proofing compound as per manufactures instructions on brick or concrete surface of wall finished complete all as specified and directed Note : Water proofing compound shall be measured and paid saparately under item

M&L 10mm thick cement plastering in cement mortar CM 1:6 finishing the surface even and smooth without using extra cement complete all as specified and directed.

Complete removal of existing treatment of any type/description such as distempering work ,internal emulsion etc from internal/external surfaces of walls & ceiling with mechanical means/grinder including removal of material from site complete all as specified and directed.

Material and Labour for exterior painting work including complete removal of existing loose paint layers till plaster level by using jet pressure washer and crack filling up to 3mm by using crack seal & up to 10mm by using textured crack filler. 1.5 mm thick wall putty with silicon additives followed by application of one coat of truecare exterior primer on walls and Chajjas and applying two coats of modified acrylic smooth emulsion exterior grade with silicon having anti-algal and Dust pickup resistance properties, Material should be applied (Dilution, Recoating period etc..) as per manufacturer instructions by using fully automatic air less spray machine having flow speed of minimum 1ltr per minute and pressure of 3300 PSI. Note-The above Specification is guaranteed for 4 year performence warranty Note- (i) The contractor shall submit manufacturer generated 04 years warranty card for each buildings treated/ painted during submission of Final Bill and guarantee amount @ 5% will be kept as reserve till completion of warranty period and will be released thereafter. Any deterioration during the warranty period will be rectified by the contractor without any financial effect within a week.

(ii) The work shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like Exterior/Interior Paint, Putty etc after approval by the GE. (iii) The Lowest bidder shall submit the "Memoradum of Understanding" (MOU) as per format given in Annexure ‘A’ after Schedule 'A' Notes with at least one of the manufacturers mentioned in the contract, after acceptance of the bid but before commencement of the work. If he fails to submit the same as referred above, his contract shall liable to be cancelled. (iv) Cost of T&P and a scaffolding/Jhoola, trestles, ladders, cradeles, centring, crane, boom lifts/ crane of any type and shuttering etc necessary for execution of work and protective measures complete upto all height shall be deemed to be included under respective item. (v) Cost of temporary covering to all joinery items (like doors, windows, window panes), sanitary fittings, dado/skirting, floors, etc to protect them from splashes. (vi) Packing material/empty Buckets will not be handed over to the contractor and will be property of the MES and will be disposed off with the permission of the Engineer-in-Charge and GE. (vii) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. (viii) Sample patch of 10Sqm be prepared and shall be got approved from GE prior to carrying out further work. (ix) Cost of removing of nails, making good holes, filling of cracks with acrylic crack filler paste etc shall be deemed to be included under respective item. (x) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary.

Supplying & applying for two component elastomeric acrylic polymer modified cementitious waterproofing coating on Brick level, SmartCare Damp Block 2K or approved equivalent (For Effloresce treatment), having 100% elongation as per ASTM D412, resisting 5 bars hydrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per ASTMC1202, crack bridging up to 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI, will be apply on both Positive & Negative side and resist up to 5 Bars of Hydrostatic Pressure. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc. After coating will sprinkle Sand on the coating is in contractor scope, complete as manufacturer specifications and complete all as specified and directed Note-Taking Down Cement Plaster and Rendering will be paid seprately

M&L prepration of new plastered or unplastered surface of walls and applying two coats of oil Bound Distemper over complete all as specified and directed

Supply only integral water proofing compound ISI marked, complete all as specified and directed