SPECIAL REPAIR TO BUILDING NO P 09 P 13 P 109 AND P 110 UNDER GE ARMY DHAR ROAD UDHAMPUR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and directed.

Dismantling of Brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

Demolition of cement concrete of any description complete all as specified.

Dismantling water tanks capacity 1000 Ltrs capacity complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exc 1.50 sqm each complete all as specified

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 Sqm and not exc 4.0 sqm each complete all as specified

Taking down shutters of any description but exc 1 sqm but n.exc 2 Sqm and refixing in same opening complete all as specified

Taking down shutters of any description but n.exc 2 sqm complete all as specified

M&L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM(1:6) complete all as specified and directed.

M&L for Brickwork with subclass `B' bricks, straight or curved on plan to any radius in half thick brick built in CM(1:4) complete all as specified and directed.

M&L for factory made, 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass / gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads for securing glass etc. size of members of shutters as specified in SSR Part - I section 8, clause 8.24 (a); supply and fixed to chowkats, all as specified and directed by Engr-in-Charge

S&F 35mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame made out of mild steel tubes for top and bottom rails . Mild steel frame shall be covered with heat molded plain cover PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and gap insert for top rail and bottom rail ; Paneling of plain colour PVC sheet to be fitted in the mild steel frame welded /sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the frame at site.

M&L for factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification & drawing and all as directed by the Engr- in-Charge.

S&F Pressed steel frames of size 105x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified as directed

S&F Pressed steel frames of size 125x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate complete all as specified as directed.

M&L for plain cement concrete type B0 (1:3:6 )(using 12.5mm graded aggregate ,etc complete all as specified as directed.

S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified .

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 300 mm long.

S&F MS 150mm long ordinary rat tail rod pattern spring incl roller and plate complete all as specified

S&F aluminium handles cast type, anodised, 150 mm size complete, all as specified .

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified.

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or all as specified and directed.

S& F for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; door frame, and similar work conforming to Fe 290 Gde-E-165 all as specified .

S&F for MS in bands straps supprt or stays for rainwater, ventilating pipes, incl bolts, if required, hooks (stai), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 290 Gde-E-165 all as specified .

S&F for Steel windows made up of box steel section of 16 gauge ms sheet ub outer frame, shutter farame and centre frame with outer side glazed shutter and inner side wire gauged shutter fixed as shwon in drg consisting with two nos pintol hinges 75mm long, two Nos stove enemaled tower bolts 150 mm long and one No steel handle, deovitailed or welded each panels complete with necessary cleats and stopers all as specified as directed.

S& F for Steel ventilator made up of box steel section of 16 gauge MS Sheet frame, fixed type suitable to fix half portion wire cloth and half portion glass with suitable MS beading or flat or oil putty complete.

M&L for 75 mm thick in Plain cement concrete type C2 ( 1:3:6)( using 20 mm graded aggregate ) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as directed at site.

M&L for 25 mm thick plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in floors finished rough all as specified.

M&L for Glazed ceramic coloured tiles 300x450x 7mm thick on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in CM (1:4) backing of wall tiles such as dado/skirting in vertical surface complete all as specified and as specified.

M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n.exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) complete all as specified

M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) complete all as specified

M & L for 20mm thick makrana marbles tiles machine cut beded jointed and pointed grey cement slurry incl cutting and polishing types complete all as specified

M&L for cutting grinding and polishing kota stone flooring all as spd and directed by Engr-in-Charge.

M&L for PCC 1:3:6 C0 using 12.50mm graded aggregate, all as specified and directed by Engr-in-Charge

Taking down shutter of any description exc 1.0 Sqm and n exc 2 Sqm for resecuring/easing & adjusting and refixing in same opening complete all as specified and directed.

M&L for taking down existing roof treatment of any description and any type all as specified and directed by Engr-in-Charge

M&L for 15 mm thick cement plaster in cement mortar 1:4 on roof surfaces finished even and smooth without using extra cement, incl water proofing compound brushing neat cement slurry with 3.0 kg of cement per Sqm complete all as specified.

Supply only liquid water proofing compound.

M&L for Priming the roof surface with bituminous primer conforming to IS-3384 @ 0.30 ltrs/Sqm and applying a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.20 Kg/Sqm and thereafter provide polymeric water proofing membrane (five layered) of weight not less than 3 Kg/Sqm with centre layer core of 90 micron high molecular density polyethylene film followed by another coat of semi hot blown 85/25 grade bitumen @ 1.20 Kg/Sqm blinded with fine sand in dry condition @ 0.50 Kg/Sqm all as specified (Make of polymeric water proofing membrane : M/s IWL India Ltd/M/s STP Texas Ltd/Bengal Bitumen)

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.

M&L for 10 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and smooth without using extra cement, all as specified .

M&L for preparing new plastered surfaces applying two coats of OBD/on new plastered surface over a coat of alkali resistant primer of any description of approved tint over new plastered surface complete all as specified.

M&L for 15 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement incl mixing of water proofing compound complete all as specified. (Note: Water Proofing compound shall be measured and paid for separately)

M&L for two coats of cement base paint on newly plastered wall surfaces over a coat of alkali resistant primer including preparation complete all as specified and as directed.

M&L for 5mm thick cement plaster on brick or concrete surfaces, as in ceiling / facia / chajja etc. in cement mortar 1:3 finished even and smooth without using extra cement, all as specified .

M&L for preparing new ceiling surfaces applying three coats of white wash complete all as specified.

M&L for preparing new plastered surfaces of walls and applying two coats of weather coat paint as on facia, fins, chajja boarder, columns, drops, parapets, etc. over a coat of painting primer, complete all as specified

M&L for complete removal all exsting old plastered surfaces of walls and applying two coats of cement base paint all as specified and dircted by Engr In Charge

M&L for preparing new plastered surfaces of walls and applying three coats of white wash on wall complete all as specified. , complete all as specified

M&L for complete removal all exsting old plastered surfaces of walls and applying two coats of OBD paint all as specified and dircted by Engr In Charge.

M&L for complete removal incl preperation old decorated wall surfaces applying two coats of white wash on wall complete all as specified.

M&L for complete removal incl preperation old decorated of ceiling surfaces applying three coat of white wash complete all as specified.

M&L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, all as specified.

M&L for Preparation of old steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint, all as specified.

M&L for preparation of old steel and iron surfaces not exceeding 10 cms width or girth and applying one coat of synthetic enamel paint, complete, all as specified.

M&L for preparation of new wooden or wood based surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, all as specified.

S&F for sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 Sqm in each pane 3mm thick all as specified

All as per item No 59 above but frosted glass.

Taking up or down steel tubing with connections for cleaning for refixing complete of bore 15mm, all as specified .

Taking up or down steel tubing with connections for cleaning for refixing complete of bore 20mm, all as specified .

Taking up or down steel tubing with connections for cleaning for refixing complete of bore 25mm, all as specified .

S&F for 15mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings all as specified.

Re-fixing only 15mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings

S&F for 20 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings

Re-fixing only 20mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings

S&F for 25 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings

S&F in repair 15 mm dia bore fancy type chromium plated bib taps with wall flange cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and as directed. Make ESS ESS/Jaquar or equivalent .

S&F in repair central hole washbasin mixer round spout with 375mm long braided hoses complete all as specified and directed CAT FLR 5167NB of Jaquar or equivalent.

S & F in repair 15 mm bore chromium plated fancy type Angular stop valve of cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed all as specified and directed.

S & F PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality suitable for hot and cold supply complete all as specified.

S&F in repair brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and as directed.

S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor with PVC (SWR) 'S' trap with 125/110 mm bore all as specified.

S&F in repair vitreous china ware over counter oval wash hand basin, any colour, size 570 x 450 mm size including cutting for and pinning ends of brackets or erecting stand including fixing waste pipe, CP waste coupling/bottle trap all as specified and approved by Enger-in-charge.

M&L black granite 18-20mm thick of any type work table rubbed ad polished for plate form and counter type for wash hand basin 18-120m m thick machine cut and polished of approved colour ( Black zet with Granite polish) incl setting and jointing in neat cement slurry and pointed in coloured cement to match the services of marble counter granite etc complete.

S&F soap tray any type fixed to plugs on wall with chromium plated brass screw complete all as specified.

S&F in repair (Plastic Polymer Cistern) valve less, with top button double action type flushing cistern of capacity 10 ltrs , low level white inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type incl provision of 32mm PVC flush pipe of required length and making connections complete incl taking down old one by dismantling the existing unserviceable cistern of any description complete all as specified.

S&F in repair Waste coupling, 32mm dia, of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75mm diameter of outlet, all as specified.

Dismantling of cast iron or PVC pipes including all fittings and accessories, 100/75 mm dia and in any position all as specified.

S&F for PVC(SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/clips complete all as specified.

S&F PVC(SWR) pipes, 110 mm external dia double socketed in any length with rubber joints, fixed to walls or laid in trenches with PVC brackets/clips complete all as specified.

S&F PVC(SWR) bends suitable for 110 mm external dia complete all as specified

S&F PVC(SWR) bends suitable for 75 mm external dia complete all as specified

S&F PVC (SWR) junction single, (single T) equal or unequal of 110mm dia

S&F PVC (SWR) junction single, (single T) equal or unequal of 75mm dia

S&F PVC (SWR) vent cowl of 75mm bore

PVC (SWR) branch pieces single Y equal or un equal with access door confirming to IS: 14735, suitable for PVC soil waste discharge pipe 110mm size complete

All as per items No 87 above but with access door all as specified and directed

All as per items No 86 above but with access door all as specified and directed

S&F for rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 1000 litres all as specified .

S&F for Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore, fixed in repairs.(Min Wt 20mm- 210 gms)

S&F for 20mm GI medium grade Nipple suitable for HDPE Water tank complete all as specified and directed.

S&F for 25mm GI medium grade Nipple suitable for HDPE water tank complete all as specified and directed.

S&F in Repair PVC waste pipe 800mm long suitable for 32mm dia waste coupling complete all as specified.

S&F in repair MS powder coated decorative mild steel curtain rod of 25 mm dia with brackets both side of globe all as specified and directed by Engr-in-charge.

Dismantling of plain, corrugated or semi corrugated sheeting, of any description, roof coverings all as specified.

S&F for painted galvaume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified as directed.

S&F painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified as directed.

S&F in repair Gun metal globe or gate valveswith iron wheel head screwed both ends for iron pipe and fixed for unions of 20 mm bore and fixed in repairs, all as specified and directed

S&F in repair Gun metal globe or gate valveswith iron wheel head screwed both ends for iron pipe and fixed for unions of 25 mm bore and fixed in repairs, all as specified and directed

Cutting chases for concealed water tubing or concealed , etc. and making good, cutting not exceeding 10cm girth in CM 1:3 complete all as specified.

S&F in repair Stop/Angle valves fancy type, chromium plated with long shank and cup (concealed type) for iron pipe or for unions of bore dia 15mm and fixed, all as specified.

S&F for Plain, Aluminium sheeting, 0.56mm thick Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing fixed to walls and fixed with screws complete all as specified as directed.

S&F in repair vitreous china urinals, half stall type (420 x 395 x 635mm), complete incl providing and fixing, bedding urinal against wall in cement mortar 1:2, pointing around urinal back in cement, grating and union for discharge pipe, CP urinal spreader and fitting with CP waste coupling all as specified and approved by Enger-in-Charge.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3.00 Kg of cement per sq m all as specified and directed.

M&L for machine cut kota stone slab 20-25 mm thick as in floor of over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl screed bed or bedding layer of mortar 20mm thick in cement mortar 1: 4 for laying floor finishes complete.

M&L, for Kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 10 mm thick 1:3 cement mortar all as specified

Dismantling wall and ceiling board (fibre, pulp, insulation etc or insulation boards/slabs/blankets any thickness incl cover fillets.

Providing & fixing False ceiling with Gypsum based ceiling tiles and frame work (with aluminum foil on one side) of size 595 x 595 mm of thickness not less than 9 mm including with GI powder coated frame angle /tee grid frame work for ceiling with following specfication (a) S&F Angle of side 25x25x1mm powder coated (b) 25x25x1 mm GI powder coated at Bottom tee as in main member (c) 25x25x1 mm thick GI powder coated at bottom tee as ibn cross members (d) S&F 1.6mm dia GI wire suspenders alongwith adjustable clamps to maintains leveling inculding fixing to ceiling fasteners manufacturers instructions complete. MAKE: VINYL TOUCH of LaGyp (LAFARGE) or equivalent in GYPROC (SAINT GOBBAIN).

M&L for Making benching with PCC (1:2:4) type B0 using WPC along side wall adjoining to roof in concave shape complete all as specified.

M&L for cement concrete type B 2 (1:2:4) 40mm graded agg in foundation filling and mass concrete complete all as specified.

Water proofing treatment to floor & vertical surfaces of sunken portion complete comprising the following: - (a) After demolition of floor & lime concrete etc. remove all loose particles along with existing water proofing treatment (any no. of layers) with wire brushes and cleaning the surfaces with water. (b) Brushing cement slurry with 1.2 kg of cement per square metre duly blended with & including water proofing compound. (c) 15 mm thick (Average thickness) plaster in cement mortar (1:3) mixed with WP compound on sunken surface including walls. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 Hrs by ponding. (d) Filling with PCC 1:7:12 in E-2 bk bats demolished portion of sunken part in cement mortar (1:4) all as specified and directed (e) Applying self adhesive type APP based polymeric membrane minimum weighing not less than 3.6 kg/ Sq. m and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gm/Sq. m), laid on floor & sides of sunken slab sealing all joints to the entire satisfaction of Engineer-in-Charge. MAKE: LAFARGE, TEXA, STP, BENGAL AQUAFLUX.

S&F expanded metal exc 4kg cut to length bent shape reqd and tying with and incl any annelead mild steel wire not less than 0.9mm dia all fixining with galvanised steel stples fixied to steel or wood member laid in any position incl closing after filling

M & L for RCC (nominal mix) 1:2:4 incl necessary form work and providing plaster of 1:3 and two coat of finishes over a coat of primer for RCC projected portion as in drawts, facia , fins etc incl demolition of existing and providing TMT bars if required all as spd and diected ( Note length of drawts, fins, facia shall be measured in respect of any thickness and height but n exc 300mm and work will be carried out exc 7m height Building) complete all as specified.

M & L for repair of RCC slab , columns, pillars, beams, etc by removing old portion of concrete and cleaning / brushing and removing of loose concrete/ applying reqd cement slurry @ 3.5Kg/Sqm making good with concrete 1:1.5:3 and applying 3mm th cement mortar 1:4 and finish the surface all as spd and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern) with trap, white (excluding fixing bolts, flushing cistern and flush pipe) incl connection to drain and flushing pipe and seat cover complete all as spd and directed.

Taking down old unserviceable / deteriorated batten/PVC conduit point wiring aluminium/ copper from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets,bell push , ceiling rose, pendants, Holders, etc but PVC concealed conduite will not be taken out from slab, and making good all disturbed surface to wall, floor etc by means of cement mortar (1 : 3) or plaster of Paris and to match / finish new surface as the existing surface either by using same colour distemper, Putti or white / colour wash all as required and directed by Engineer-in-Charge.

M & L for concealed point wiring on wall and ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including concealed rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 20 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and Bakelite laminated sheet 3mm thick ISI marked for fixing of switches / sockets, fan regulators, wall mounting fittings, door bell & bulkhead etc with MS screw and cup washers including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting chases of wall for recess the PVC conduit and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge Note:- PVC conduit will be used on surface for ceiling with proper shadeling all as directed at site.

One light /Fan/Bell point controlled by one switch 6/5 Amp one way single pole.

One 3 pin socket outlet 6/5 Amps controlled by one switch on the same board with other switches.

One 3 pin 6/5 Amp socket outlet controlled by one switch independent board.

All as per item No 122.0 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

S&F switch piano flush type (ISI marked), single pole, one way 6 Amp, 240 Volts complete all as specified and as directed.

S&F switch piano flush type (ISI marked), single pole, one way 16/15 Amps, 240 Volts including complete all as specified and as directed.

S&F socket outlet 3 pin, 6 Amp piano flush type including complete all as specified and as directed.

S&F socket outlet, 2 in 1, 3/5 pin 6 / 16 Amp, piano flush type complete all as specified and as directed

S&F ceiling rose, surface bakelite, 65mm x 50mm, two to three terminals complete all as specified and as directed.

S&F for batten angle lamp holder insulated body with back plate suitable for batten fittings including complete all as specified and as directed.

S&F Wall mounted LED batten 18/20 Watt with LED tube rod 4 feet long, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete including taking down old unserviceable fitting all as specified and directed. Make Havells /crompton/Wipro

Taking down and refixing of old serviceable LED tube light fitting /Bulk head fitting any type any watt all as specified and directed Note:- Contractor will stock existing fitting in safe custody and also submit inventory.

Taking down and re fixing old serviceable ceiling fan after servicing of,oiling,greasing and painting of any type any size including replacement of connecting wire and clamp and rubber real all as specified and directed. Note:- Contractor will stock existing fitting in safe custody and also submit inventory.

Supply & Fixing medium step type fan regulator 80 Watt, 240 Volt AC, socket size, medium step" ISI marked complete all as specified and directed.

S&F Wall mounted Mirror light LED fitting, 10 Watt, 2 Feet long incl integrated electronic driver including dismantling taking down unsv sketch fitting any type complete and taking down old unserviceable fitting all as specified and directed.Make- Havells/CG/Philips/Wipro

S&F LED Lamp 10 Watt CDL B-22 Cap base holder, 230 volts Make Wipro/Crompton/Phipils

S&F decorative wall mounnted luminaire with & including 09 watt LED lamp complete including taking down old unserviceable fitting as directed and specified Make- Havells cat No LHFOAJE1TN1I060 or eqvts of CG/Philips/Wipro

S&F LED building security light 35/36 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade suitable size dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener incl dismentling taking down unsv fitting any type all as specified and directed. Make- Crompton / Havells/Philips/Wipro

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep 900 RPM with louver including cutting of hole of adequate size including mosquito wire mesh with wooden frame outer side of exhaust fan and making good existing surfaces incl fixing with MS fasnut all as specified and directed Make- Crompton/Bajaj/Havells

Supply & Fixing MCB SPN, 32 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed. Make: Schneider Electric/Legrand/L & T

Supply & Fixing MCB SP, 06 to 32 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed. Make - Schneider Electric/Legrand/L & T.

Supply & Fixing in replacement of old DB by SPN Distribution Box, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 12 way, confirming to IS 13032 & 8623 complete all as specified and directed.

Supply & Fixing in replacement ofold DB by TPN Distribution Box vertical, double door of protection grade IP 43 fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 4 way, confirming to IS 13032 & 8623 including chasing/cutting of wall and concealed and making good as existing surface complete all as specified and directed.

Supply & Fixing MCB TPN, 63 Amps 415 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed.

M & L for sub main wiring with two run of FRLS PVC insulated unsheathed flexible copper conductor (Multistrands), single core of size 6.0 Sqmm, 1100 Volts grade and one run of 4.00 Sqmm FRLS PVC insulated unsheathed as earth (In Green Colour), flexible copper conductor (Multistrands) for continuous earthing conforming to IS 694 with latest amendments incl PVC conduit and conductors drawing in PVC rigid conduit 25 mm dia medium grade ISI marked concealed in wall and surface on roof/ceiling , connecting incoming / outgoing electric connections by using required size copper lugs / thimbles and making good the disturbed surface to match with existing complete in all respect all as specified and directed. Note :- 1. Two run of single core cable with one run of contineous earth wire of copper conductor wire Flexible (Multistrand) of FRLS PVC and PVC conduit 25mm dia insulated shall be measured and paid as one unit length.

M&L for earthing with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron wire 4 mm dia (8 SWG) as earthing lead protected by GI pipe medium grade 15 mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal /coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters compete all as specified as shown in electricall plateNo. 3 of SSR Part-I and testing of earth resistance as required. Note : Earthing lead/G.I.Earth wire upto 7.5 metre length shall be deemed to be included in quoted unit rate beyond 7.5 metre, the same shall be measured and paid separately).

Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in deep getting out in hard/dense soil for stay assembly/laying of cable/errection of poles and laying of water pipe line etc complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick.

Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

Supply and laying pipe galvanized, “Medium class”, including fittings 25 mm (1”) dia ,with all fitting incl connection, laid in trenches/wall all as specified and directed.

supply and fixing Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron/GI pipe 25 mm dia

Taking down old unserviceable GI pipe 25 mm dia

Taking down old unserviceable valve 25 mm dia

Supply ,laying and testing and passing through pipe, laid in trenches or fixed to pole/wal or fixed to LT panel board, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed 35 Sqmm 3.5 core with required aluminium cable lugs all as specified and directed.

M & L for dry Sand cushioning in trenches for protection of cable including watering and consolidation all as specified and directed. Note: Punned thickness 18 cm shall be considerd for measurment purpose

M & L for well burnt brick sub class B old size laying in trenches perpendicular to axis of the cable complete all as specified and directed.

Supply and laying in trenches/Floor or fixed to Pole/Wall of GI pipe light grade with fitting of size 50 mm bore for protection of cable including dismantling existing pipe complete all as specified and directed by the Engineer-in-Charge.

M&L for cutting of PCC/Hard standing/WBM road not exceeding 20 cm in width not exceeding 30 cm in depth for passing of LT cable and making good of disturbed surface to match with the existing surfaces by using old and new material i.e bitumen/PCC (1:3:6) type C-1 complete all as specified and directed .

Taking down old unserviceable LT cable 35 Sqmm 3.5 core

PARAS RAM ASGOTRA AND SONS