Additional improvement Works to Telugupalayam Hospital Building in Ward No.76, South Zone, Coimbatore Corporation

Dismantling the Damaged Brick Work as per the direction of Engineer-in-charge.

Earth work excavation in all kinds of soil including sand, silt, wet sand under water, black cotton, stiff black cotton, clay, hard stiff clay, hard red earth, murram, stoney earth, gravel and shales etc. excepting all kinds of rock and boulders exceeding 0.014 c.u.m. in volume including rough dressing and dumping the excavated materials away from work site manually within 50m initial lead and 2m initial lift as per the direction of Engineer-in-charge.

Cement concrete 1:4:8 (one cement, four sand and Eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted, etc., complete complying with standard specification.

Flyash Brick work in cement mortor 1:5 mix (one cement,five sand) using II class country bricks to a size of 9"x4 3/8"x2 3/4" including cost and conveyance of all materials and labour charges for mixing the mortor, constructing, curing to required period and wherever the masonry projection is necessary for elevation shall be done with out extra cost etc complete as per std spn.upto basement

Supplying and filling in foundation and basement etc., with filling Well Gravel in layers well watered, rammed and consolidated etc., complete complying with standard specification and as directed by department officers.

Plastering in cement mortor 1:5 mix (one cement,five sand) 12mm thick including cost and conveyance of all materials and labour charges for mixing the martor, and the surface rubbed for smooth and curing to required period, etc complete as per std Specification TNSS No.61,V,VI,(S4)3

Plain cement concrete 1:2:4 mix (One cement two M.Sand and four aggregate) using 20mm size ISS gauge HBBG metal including mixing, laying, consolidating, curing, cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification - 1 m3 (detailed data for 10 m3 )

Dadooing walls with Ceramic tiles of size 200mm x 200mm x 6mm first quality design tiles of all colours laid in cement mortar 1:2 mix, 10mm thick and pointing with white cement using 0.40 kg/1m2 including finishing the joint and pointing flush with tile surface etc., complete

Roofing with plain GI sheet 0.80mm thick (22 gauge) with necessary bolts nuts and washers etc., completed with ridges - 1m2

supply and fixing of mild steel grills and angels ,flats,purlin,truss with angles as per direction of dept officers etc complete

Electrical arrangements

Supply and Fixing of 3 Phase UPS (Three Phase in & Single Phase Out) 10 KVA CAPACITY - SYSTEM WITH BATTERY - 2 HOUR BACKUP

SUPPLY & INSTALLATION OF AIR-CONDITIONER WITH COPPER COIL 1.5 TR Split Type AC Unit - 5 Star Rated

SUPPLY & INSTALLATION OF AIR-CONDITIONER WITH COPPER COIL 2 TR Split Type AC Unit - 5 Star Rated

Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time delay relay

Supply and laying of 5/8” and 3/8” copper pipe (Extra beyond 3 metres supplied with AC unit)

Supply and fixing of MS stand for fixing outdoor unit

Painting with first quality emulision paint two coats over a priming coat including through cleaning, scraping removal of dust and including necessary palst of paries putty works whereever required etc,completed

Supply and Fixing of Water Purifier with UV Technology dispensing normal and Hot water at the Flow rate of 250 litres per hour

Supply of Flamed Steel Grey Granite Slab 1200mm x 600mm, 16mm to 18mm Thick

Providing and fixing Acoustic Wall Panelling (equivalent to Armstrong) in channelled wood works perforated panels of width 192mm, thickness of 15mm and length of 2400mm or as per required by the Departmental Engineer made of a high density fibre board with minimum 725 kg./m3 density substrate with a laminated facing as per the approved shade and finish and a melamine balancing layer on the reverse side. The boards shall have a special peforation pattern where the visible surface has a “Helmholtz” fluted perforation of 3mm width and 21mm of visible panel each. The edges of the panels shall be “tongue-and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non woven acoustical fleese having NRC of 0.52. The panels shall be mounted on special aluminium splines using clips provided by Armstrong and approved by the Engineer-in-Charge. Installation: Install aluminium box section (provided by others) of section 50mm x 25mm or as approved by the Engineer-in-Charge on the solid wall horizontally using screws and plugs at spacing of 600mm centre to centre. Screw the aluminium extruded keel for channelled wood works provided by Armstrong over the lowest and second aluminium section at an on centre distance of 600mm. Place the inside clip on the groove end of the panel along the aluminium keel and then place the tongue end of the next panel. Continue installing rows of panels by inserting the tongue into groove of the earlier inserted panel and progressively installing inside clips into the next keel till the actual height is achieved. Finish off the edges using wooden moulding of matching colour (provided by others). Installation to be carried out by Armstrong Trained Installation Team and installation should be carried out as per Armstrong Recommended Procedure

Supply and Fixing of Stainless Steel Waiting Chair (3Seater), SS 304 With Perforated Seat, Armrests, anti-slip base, Polished Finish Including Transport and All Labour Charges etc., Complete

Supply and Tururffing of Korean grass for 45 Sq Ft Including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, Supply and planting of sapling, refilling of excavated earth etc