Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.6 LAccepted-AOC CHHURTA JHAJJAR KOTLI JAMMU J K 181222 | 181222 | L1 | Accepted-AOC Being 1st lowest bidder | |
| 2 | L2₹7.3 L+₹65,131.32 (9.82%)Rejected-Finance | L2 | Rejected-Finance 2nd Lowest Bidder after deducting sch of credit Rs 50800 | |
| 3 | L3₹8.0 L+₹1.3 L (20.0%)Rejected-Finance | L3 | Rejected-Finance 3rd Lowest Bidder after deducting sch of credit Rs 50800 | |
| 4 | L4₹8.0 L+₹1.4 L (20.9%)Rejected-Finance NEAR INDUSTRIAL ESTATE THANDA PADDAR UDHAMPUR J K 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L4 | Rejected-Finance 4th Lowest Bidder after deducting sch of credit Rs 50800 | |
| 5 | L5₹8.2 L+₹1.5 L (23.1%)Rejected-Finance | L5 | Rejected-Finance 5th Lowest Bidder after deducting sch of credit Rs 50800 |
Tender Value
₹9.6 L
EMD Value
₹19,100
Closing Date
20 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (ARMY) DHAR ROAD
GE (ARMY) DHAR ROAD
COMPREHENSIVE MAINT OF CERTAIN BLDGS AT JAK LI RTC DHANSAL UNDER GE (ARMY) DHAR ROAD
2023_MES_581501_1
8068/NIT-59/2022-23
Open Tender
Civil Works
Item Rate
180 days
DHANSAL
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Yes
GE (ARMY) DHAR ROAD
₹19,100
Yes
8 May 2023
17 Feb 2023
22 Mar 2023
18 Feb 2023
20 Mar 2023
4 Mar 2023
Amount
Dismantling wrought iron or mild steel work of any description not other wise provided for.
Rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or incl butt welded tubes conforming to IS 1161-1998 grade St-240 and painted one shop coat of zinc chromate promer paint (incl preparation of surface) at contractor's workshop before fabrication complete all as specifed and directed.
Mild steel rolled section as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) incl distance pieces, cleats etc. confirming to grade Fe-290. Gde- E-165. complete all as specifed and directed.
Dismantling of plain & corrugated steel sheeting any gauge, thickness including Nanital or similar pattern roof covering like ridges, hips, valleys and flashings etc complete all as specified.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour tensile strength of 550mpa as in roof covering/cladding to wall, fixed with self tapping screws as a specified.
S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550mpa as in roof covering/cladding to wall, fixed with self tapping screws as a specified.
M & L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a priming coat of red oxide zinc chrome primer complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete, all as specified.
Material and labour for cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed.
M & L for non skid coloured joint free ceramic tiles 400x400x 7-8 mm thick in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:4,complete all as specified and directed.
Glazed ceramic tile 300 x 200 x 6-7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick plaster in cement and sand mortar 1:4 complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles, all as specified .
Material and labour for brick work with old size sub class 'B' burnt clay bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar 1:4 complete all as specified and as directed.
M&L for Brick work with sub class 'B' bricks (except bricks), straight or curved on plan exceeding 6 metre mean radius in cement mortar 1:4, all as specified.
Material and labour for Plain Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping, benching including weathering slightly rounded or chamfered angles as directed including necessary form work complete all as specified and as directed.
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
M/L 15mm thick rendering in cement mortar 1:4 in two layers using WPC as per manufacturer instruction on finishing layerof rendering on brick or concrete surfaces finished even and smooth complete all as specified.(Note: WPC shall be measured and paid separately under appropriate item as supply only)
Supply only integral water proofing compond approved brandcomplete all as specified.
Material and labour for Plain Cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and as directed.
M& L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl forms, moulds, mitred.
75mm thick PCC 1:3:6, type C-2 using 40mm graded stone aggregates as in sub base of floor, finished even and fair, complete all as specified and directed.
25mm thick sand cushioning for laying of paver blocks complete all as specified and directed. Note :- Punned thickness of sand shall be measured and paid.
M&L for Factory made, Machine pressed precast concrete interlocking paver block any shape and size approved by EIC, ISI marked (IS:15658-2006) of 60 mm thick, M-35 grade (medium Traffic), with grey cement & pigment, complete all as specified and directed.
M&L for preparing plastered new surface of wall and applying three coats of white washing on undecorated surface on walls complete all as specified and directed
S&F PVC connection 15 mm size, of length 600 mm, with PTMT nuts supplied and fixed in repairs complete all as specified.
S&F in repairs PVC connection 15 mm size, of length 450 mm, with PTMT nuts complete all as specified and directed.
Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc including cleaning for refixing or removal complete all as specified and directed.
S&F 15mm bore tubes, medium grade, galvanised with and including all fittings fixed to walls, floors, or ceiling or laid in floors etc complete all as specified and directed.
S&F in repairs angle valve of 15mm size PTMT any colour high pressure screwed for iron pipe (Minimum weight 15mm-90gms) complete all as specified and directed.
S&F in repairs stop valves cast copper alloy but fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm, complete all as specified and directed.
S&F in repairs gate valves, with iron wheel head, screwed both ends for bore of 15 mm pipe complete all as specified and directed.
S&F in repairs pillar taps cast copper alloy, fancy type with capstan head, CP, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore, ccomplete all as specified and directed.
S&F in repairs bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm, complete all as specified and directed.
PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 90 cm long etc, supplied and fixed in repairs, complete all as specified.
Flush pipe of polyethylene of low or high density, 32 mm dia for low level cistern including taking down old pipe, complete all as specified.
Ball valves, high pressure of brass with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) fixed in repair complete all as specified.
Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) fixed in repair complete all as specified.
M & L for dismantling of water tank of capacity exc 500 and not exc. 1000 litres and removing to store and supply and fixing of 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top & FDA approved, tripple layer body, 100% UA stablised, rust proof) hoisted and fixed in position all as specified in SSR Part-I, complete, all as specified and as directed. Note : Water storage tank shall be White with screwed lid
SUBASH CHANDER
M/S PAWAN KUMAR ANAND
K S BUILDERS
MADAN LAL SHARMA AND SONS
MAHADEV ENTERPRISES
M/S SANJAY STEEL WORKS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .