Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.6 CrAccepted-AOC 9 A PONGALIVALASU KODUMUDI POST ERODE 638 151 | KARUR | TAMIL NADU | 638151 | ₹39.6 Cr | L1 | Accepted-AOC Lowest and negotiated |
| 2 | L2₹39.9 CrRejected-AOC NAMAKKAL | ₹39.9 Cr | L2 | Rejected-AOC Highest rate tenderer |
| 3 | L3₹40.1 CrRejected-AOC ERODE 638 002 | ₹40.1 Cr | L3 | Rejected-AOC Highest rate tenderer |
| 4 | L4₹41.4 CrRejected-AOC CHENNAI 600 095 | CHENNAI | TAMIL NADU | 600001 | ₹41.4 Cr | L4 | Rejected-AOC Highest rate tenderer |
| 5 | L5₹41.4 CrRejected-AOC 121 THIRUMURUGAN NAGAR VEERIYAMPALAYAM ROAD KALAPATTY POST COIMBATORE 641048 | COIMBATORE | TAMIL NADU | 641048 | ₹41.4 Cr | L5 | Rejected-AOC Highest rate tenderer |
| Sl No | Description | Qty | Unit | Sri Balaji Constructions L1 | PTM PROJECTS PVT LTD L4 | GRM CONSTRUCTIONS L2 | P.K.SUBRAMANIAN CONSTRUCTION L6 | S S Natarajan & Co L3 | RSK CONSTRUCTION AND PROJECTS L5 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Earth work excavation in all soils (including refilling)
a) 0 to 2 mt. | 1,803.8 | 1 Cum | 300 ₹5.4 L | 250 ₹4.5 L | 311 ₹5.6 L | 250 ₹4.5 L | 200 ₹3.6 L | 194 ₹3.5 L |
| 2.00 | Earth work excavation for Open foundation (excluding refilling)
a) 0 to 2 mt. | 823.9 | 1 Cum | 150 ₹1.2 L | 150 ₹1.2 L | 147 ₹1.2 L | 123 ₹1.0 L | 150 ₹1.2 L | 117 ₹96,396.30 |
| 3.00 | b. 2 to 3 mt. | 118.4 | 1 Cum | 150 ₹17,760 | 160 ₹18,944 | 161 ₹19,062.40 | 135 ₹15,984 | 170 ₹20,128 | 152 ₹17,996.80 |
| 4.00 | c. 3 to 4 mt. | 113.4 | 1 Cum | 165 ₹18,711 | 170 ₹19,278 | 175 ₹19,845 | 144 ₹16,329.60 | 200 ₹22,680 | 187 ₹21,205.80 |
| 5.00 | d. 4 to 5 mt. | 68.1 | 1 Cum | 180 ₹12,258 | 180 ₹12,258 | 189 ₹12,870.90 | 158 ₹10,759.80 | 250 ₹17,025 | 222 ₹15,118.20 |
| 6.00 | Providing pre-constructional Antitermite treatment including cost of chemicals labour | 1,020 | 1 Sqm | 40 ₹40,800 | 30 ₹30,600 | 25.6 ₹26,112 | 28 ₹28,560 | 80 ₹81,600 | 75 ₹76,500 |
| 7.00 | Supplying and filling in foundation and basement with crushed stone sand in layers of 150 mm thickness | 272.7 | 1 Cum | 1,800 ₹4.9 L | 1,000 ₹2.7 L | 1,988 ₹5.4 L | 1,670 ₹4.6 L | 2,500 ₹6.8 L | 2,000 ₹5.5 L |
| 8.00 | Filling in foundation and basement and other similar works with Excavated earth in layers of 150mm thick | 573.3 | 1 Cum | 50 ₹28,665 | 30 ₹17,199 | 38 ₹21,785.40 | 43 ₹24,651.90 | 100 ₹57,330 | 62 ₹35,544.60 |
| 9.00 | Supply and filling in foundation and basement with Stonedust in layers of 150mm thickness | 252.6 | 1 Cum | 450 ₹1.1 L | 500 ₹1.3 L | 509 ₹1.3 L | 320 ₹80,832 | 2,200 ₹5.6 L | 408 ₹1.0 L |
| 10.00 | Supplying of stone dust including conveyance and cost of materials | 82.2 | 1 Cum | 400 ₹32,880 | 400 ₹32,880 | 446 ₹36,661.20 | 305 ₹25,071 | 2,100 ₹1.7 L | 358 ₹29,427.60 |
Tender Value
Refer Docs
EMD Value
₹25.2 L
Closing Date
20 Jan 2026, 6:00 pmClosed
Superintending Engineer / CC
No.132, E.V.R.Salai, Kilpauk, Chennai-10
Construction of 120 Nos. of PC/HC Quarters (Stilt plus 10 floors 1 block of 80 in 1 and stilt plus 10 floors 1 block of 40 in 1) at Kondithope in Chennai city
2026_TNPHC_639033_1
SE/CC/DB/4187/2025
Open Tender
Civil Works
330 days
Kondithope in Chennai city
Construction of 120 Nos. of PC/HC Quarters (Stilt plus 10 floors 1 block of 80 in 1 and stilt plus 10 floors 1 block of 40 in 1) at Kondithope in Chennai city
9 documents required · 9 mandatory
₹0
₹25.2 L
14 Mar 2026
5 Jan 2026
22 Jan 2026
5 Jan 2026
20 Jan 2026
5 Jan 2026
Earth work excavation in all soils (including refilling) a) 0 to 2 mt.
Earth work excavation for Open foundation (excluding refilling) a) 0 to 2 mt.
b. 2 to 3 mt.
c. 3 to 4 mt.
d. 4 to 5 mt.
Providing pre-constructional Antitermite treatment including cost of chemicals labour
Supplying and filling in foundation and basement with crushed stone sand in layers of 150 mm thickness
Filling in foundation and basement and other similar works with Excavated earth in layers of 150mm thick
Supply and filling in foundation and basement with Stonedust in layers of 150mm thickness
Supplying of stone dust including conveyance and cost of materials
Supplying of 3 to 10mm size HBSJ including conveyance and cost of materials etc
Supplying and laying of Rubber moulded hydraulic pressed Paver blocks following thick b) 83mm thick Paver block
Bored cast in situ piles Installation of vertical cast in situ bored piles of following dia using Standardised Concrete Mix M-30 Grade b.600mm dia pile
Chipping of RCC pile head of 500mm Dia of pile to the required cut off level and clearing away the debris from site with an average lead of 5 km etc. b.600mm dia pile
Mobilization Charges inclusive of Transportation to site assembling and Dismantling the rotary pile equipment employed for the works etc.
Conducting Routine vertical compression load test for bored cast in situ RCC piles
Plain cement concrete 1:5:10 for Foundation & Basement
Plain cement concrete 1:2:4 for Foundation & Basement and other similar works
Plain cement concrete 1:3:6 for foundation & basement using 20mm gauge hard broken stone jelly
Precast cement concrete Jally ventilator using standardised concrete mix M30 (without vibrating charges) 50mm thick a. In Ground floor
Providing and laying in position, Standardised Concrete Mix M-30 Grade a. In Foundation and basement
b. In Ground Floor
c. In First Floor
d. In Second Floor
e. In Third floor
f. In Fourth floor
f. In Fifth floor
g. In Sixth floor
h. In Seventh floor
i. In Eighth floor
j. In Ninth floor
k. In Tenth floor
l. In Eleven floor
m. In Twelveth floor
Providing Rain water harvesting pit by augering 300mm dia bore pits to a depth of 5.50m overall depth Precast slab Standardised Cement concrete M 30 grade a) Providing pit
b) Augering 30cm dia
Providing Rain Water Harvesting well ring in circular shape of 90cm dia, 60cm depth (30cm depth 2 Nos) 50mm thickness using standardised concrete mix M20 grade using 20mm HBSJ
Brick work in CM 1:5 using chamber burnt bricks of size 9”x4½”x3” (23x11.4x7.5 cm) a) Foundation and basement
Brick work in Cement Mortar 1:6 using Chamber burnt bricks of size 9”x4½"X3” (23x11.4x7.5cm) for super structure in the following floors b. In Ground Floor/Stilt floor
b. In First Floor
c. In Second Floor
d. In Third Floor
e. In Fourth Floor
f. In Fifth floor
g. In Sixth floor
h. In Seventh floor
i. In Eighth floor
j. In Ninth floor
k. In Tenth floor
l. In Eleventh floor
Brick partition wall in Cement Mortar 1:4 114mm thick for super structure in the following floors using chamber burnt bricks of size 9”x4¼”x3” (23x11.4x7.5cm) b. In Ground Floor/stilt floor
c. In First Floor
d. In Second Floor
e. In Third Floor
f. In Fourth Floor
f. In Fifth floor
g. In Sixth floor
h. In Seventh floor
i. In Eighth floor
j. In Ninth floor
k. In Tenth floor
Brick partition wall in Cement Mortar 1:4 75mm thick for super structure in the following floors using Chamber burnt bricks of size 9”x 4½”x 3” (23 x 11.4 x 7.5cm) b. In First Floor
c. In Second Floor
d. In Third Floor
e. In Fourth Floor
f. In Fifth floor
g. In Sixth floor
h. In Seventh floor
i. In Eighth floor
j. In Ninth floor
k. In Tenth floor
Supplying and fixing of 20mm thick bituminous expansion joint filler pad of approved quality and make
Flooring with a bed of CC 1:5:10 using 40mm size hard broken stone jelly
Plastering the top of flooring in CM 1:4, 20 mm thick
Finishing the top of flooring with cement concrete 1:3, 20 mm thick Ellispattern Flooring (No Sand)
Weathering Course with concrete broken brick jelly 20mm gauge in pure burnt lime stone slaked and screened (No Sand)
Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3
Supplying and fixing of Colour glazed tiles using Grout (Tile Joint Filler), C.M 1:2, 10mm thick
Supplying and fixing of colour Ceramic Tiles Anti skid using Grout (Tile Joint Filler).
Providing single nosing to the edges of Granite slab of 10 mm thick
Supplying and fixing of Ruby Red / Raw silk colour Granite Tiles (superfine polished with machine cut edges) of required sizes of 10 mm thick for wall cladding
Supplying and fixing of Ivory colour Vitrified Tiles of size 59.5 x 59.5cm x10mm for flooring with grout (Tile joint filler)
Supply and laying of superior variety Concrete Designer tiles for flooring in CM 1:3
Supplying and fixing of PVC Trims / Corners beading suitable colour in toilet wall cladding in all floors
Formwork using M.S.Sheet a) For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,
b.Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts,sill slab,staircase,portico slab and other similar works
c.For Square and rectangular columns and small quantities
d.Vertical wall
f.Curved surface
Plastering in C.M. 1:5, 12 mm thick
Plastering in C.M. 1:4, 12 mm thick
Special ceiling plastering in cement mortar 1:3, 10 mm thick
Plastering with CM 1:3, with 12 mm thick mixed with water proofing compound (CICO) at the rate of 2 kg / 10 sq.m
Plastering in CM 1:5, 12mm thick for border finish in all floors a. 150 mm wide
b. 75 mm wide
c. 50 mm wide
White washing three coats using clean shell lime slaked
Painting - New "wood work"
Painting - New "iron work"
Supplying and applying of Full putty one coat with aproved make wall putty for smooth finishing the new cement plastered walls
Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling
Providing two coats of Plastic Emulsion paint including primer for inner walls
Providing two coats of Exterior Emulsion paint including primer for outer walls
Providing the new wood work with two coats of best melamine polish/varnish of approved quality and brand
Teak wood Wrought & Put up a) T.W. over 2 m & below 3 m
b. T.W. below 2 m length.
Supply and fixing of Magnetic door catches
Supplying of mild steel hold fasts horizontally twisted of size 230x40x4mm with pair of suitable iron screws
Supply & Fixing of WPC Decora door set where the door shall be extruded as a single core door
Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes
Supplying and fixing in position of UPVC window of casement type( open) for all sizes
Supply and fixing of UPVC Sliding Window (Two Track)
Supplying and fixing of Best Indian Teakwood Panelled door shutters Single leaf in position using 125mm x 37.5mm styles and 3 Nos. of 150x37.5mm rails ( top, middle, bottom and lock rail) 3 nos. of 75mm x 37.5mm vertical shorter styles and 18.75mm thick planks for panels a. 1000X2100mm with Brass fittings
Supplying and fixing of Single leaf Solid core flush door shutters using boiled water resistance (BWR) teak wood ply as per IS 303-1989 a) Door size 900mm x 2100mm (single Leaf)
Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure or gate
Applying one coat of Anticorrosive treatment for steel window/ M.S. Grills (using 5 liters of anticorosive chemical per one MT of steel) at site
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick
Supplying, Fabrication and placing of Mild steel grills Fe550D (Corrosion resistant reinforcement) of all diameters for reinforcements for all floors
Providing Cuddappah slab of 20mm thick, finishing with two sides for cupboard, ward-robes, shelves, kitchen platform slabs, sink and other similar works a. Ground floor
b. In First floor
c. In Second floor
d. In Third floor
e. In Fourth floor
f. In Fifth floor
g. In Sixth floor
h. In Seventh floor
i. In Eighth floor
j. In Ninth floor
k. In Tenth floor
Providing Cuddappah slab of 40mm thick, finishing with two sides for cupboard, ward-robes, shelves, kitchen platform slabs, sink and other similar works a. In Ground floor
b. In First floor
c. In Second floor
d. In Third floor
e. In Fourth floor
f. In Fifth floor
g. In Sixth floor
h. In Seventh floor
i. In Eighth floor
j. In Ninth floor
k. In Tenth floor
Supplying and fixing of Jet Black Granite Tiles (superfine polished with machine cut edges) of size 2'-0"x 1'-0" of 10 mm thick for Kitchen arrangements b. In First floor
c. In Second floor
c. In Third floor
e. In Fourth Floor
f. In Fifth floor
g. In Sixth floor
h. In Seventh floor
i. In Eighth floor
j. In Ninth floor
k. In Tenth floor
Providing T.W.double leaf shutters with 9mm thick BWR Ply wood for cupboard/ward robes shutters
Supplying and fixing of pre-cast kerb stone of size 450x300x150mm made in CC 1:3:6
Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark confirming to IS 13952:1992- type 'A' for Rain water down fall pipe
Supplying and fixing of C.I. steps of approved quality and brand (not less than 5kg 1 No)
Supplying and fixing of half turn C.P Long body Tap of 15mm dia of best quality
Supplying and fixing of half turn C.P short body Tap of 15mm dia of best quality
Supply, delivery and fixing of cuddappah slab sink of size 600mm x 600mm x 200mm thick
Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 a. 32 mm dia
b. 25 mm dia
Supplying, laying and fixing of 20 mm dia GI Pipe ‘B’ Class of best approved quality for Hot water line fully concealed in walls
Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness (fully consealed in walls) c. 20mm dia PVC water supply ASTM pipe
Supplying and fixing of 100mm dia GI pipe below Ground level.
Borewell Arrangements Drilling of borewell including transportation from one place to another place a) Drilling of borewell in upto 76m
b) From 77m to 91m
c) From 92m to 107m
d) From 108m to 122m
Reaming from 150mm dia pilot bore to 300mm dia bore as directed by the departmental officer’s up to 60m depth ending from ground level. a) upto 60m depth ending below ground level
b) From 60m upto 90m Depth ending from ground level
c) From 91m upto 120m Depth ending from ground level
d) From 121m upto 150m Depth ending from ground level
Supply and erection of following dia of PVC casing pipes (6Kg/cm2) as per IS 12818/2010 of approved quality for bore wells a) 150mm dia of PVC casing pipes (6Kg/cm2) (Shallow depth)
b) 200mm dia of PVC casing pipes (6Kg/cm2) (Medium depth)
Supply and delivery of following dia of Ribbed screen PVC casing pipes (6Kg/cm2) a) 150mm dia
Labour charges for inserting of Following PVC Casing pipes assembly (With slots or without slots) in the drilled hole a) 150mm dia casing pipes assembly
b) 200mm dia casing pipes assembly
Supply and fixing of 160mm dia PVC end cap of approved make as per IS 10124/1982 Part-II for borewell top cover of 6.1mm thick with inner thread
Charges for developing the bore well with air compressor of 300 CFM capacity (Minimun 8 Hours)
Supply and delivery of required dia Nylon rope of superior quality for submersible pumpset in borewell
Supplying and delivery of following dia MS clamp sets as per IS 1239/part II for erection of submersible pumpset in wells a) 150mm dia MS clamp sets
Supplying and fixing of porcelin Wash hand basin (white without pedastal), superior variety of size 550x400mm with all accessories
Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings over a bed of 150mm thick
Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety)
Supplying and fixing of PVC low level flushing tank (White - 10 litre capacity) with all internal fittings (wall mounting type)
Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark grade ' P' or "S' trap - In Ground floor
Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark with PVC SWR grade ' P' or "S' trap- (Other than ground floor)
Supplying and fixing EWC superior variety (white) 500mm with PVC SWR grade 'P' or 'S' trap
Supplying and fixing the following dia PVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type 'B' for soil line with relevant specials confirming to IS 14735 a) 110 mm dia.
b. 75 mm dia.
Supplying, laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type 'B' for waste water line
Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 b. 160 mm UPVC Non Pressure pipe
c. 250 mm UPVC Non Pressure pipe
d. 315 mm UPVC Non Pressure pipe
Supplying and fixing of best approved quality of following CP water supply/Sanitary fittings confirming to I.S. specification b) CP two Way bib cock with health faucet
c) Chromium Plated Stop Cock 15mm dia
d) CP Shower Arm with Overhead Shower Rose
Supply and delivery at site and fixing of SFRC manhole cover with frame with locking arrangement of clear opening heavy duty (35 M.T Capacity) a. 600mm x 600mm
Supplying and fixing of 20mm dia aluminium hanger rods
Supplying and fixing of aluminium towel rails of 75cm long
Supplying and fixing of aluminium plate with five pins for coat stand
Providing and fixing iron chromium plated 8 gauge Picture hooks
Supply and Fixing of Bevelled edge mirror of approved quality and brand of size 500x400x5.5mm
Supply and planting of avenue trees including earth work excavation for pit of size 60x60x60cm filled with manure for 20cm depth
Supplying and fixing of triangular shape chicken mesh tree guard
Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark with suitable size PVC box (Fire retardant box) for coastal a. Light point with ceiling rose
b. Light point without ceiling rose
c. Calling bell point with Buzzer/ Calling bell
Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.(PVC Electrical Box )
Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.(PVC Electrical Box )
Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.
Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.(PVC Electrical Box )
Supplying and fixing of 15 Amps 3 pin flush type plug using ( PVC Box , Fire Retarded Box)
Providing Earthing station using pipe electrode as per IS 3043 using 2.5m of 40mm and 1.0 m of 20mm B-class GI pipe
Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook
Charges for assembling and fixing of ceiling fan
Supply and delivery of following Electric Ceiling fan with ISI mark a) 48" Electric fan 1200mm sweep
Supplying and fixing of 225 mm dia sweep AC exhaust fan of approved ISI Quality
Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9 watts LED bulb
b) 12 watts LED bulb
Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with ISI mark
Supply and fixing of 2' LED Tube Light
Supplying and fixing of water tight Bulk head fitting suitable for 12 watts LED
Supply and fixing of LED Street lighting luminaries suitable for fixing following watts LED lamp b) 25watts LED lamp
Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel with Metal Door Cover with IP42 Protection Lower End
Supply and fixing of manually operated phase changer board with 3 Nos. 63 A ( L & T / Selzier make ) 63 A switch in single suitable MS enclouser ( 3 way ) with RYB indication lamps
Providing and fixing G.I. tape 25 mm x 6 mm thick on porcelian insulators on parapet or surface of wall for lightning conductor complete as required (For horizontal run)
Providing and fixing G.I. tape 25 mm x 6 mm thick on porcelian insulators on parapet or surface of wall for lightning conductor complete as required (For vertical run)
Supply and fixing of 7 segment 6 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type i. 63A 4P MCB - 1 No ii. 63A DP MCB Isolator -3 Nos iii. 6A to 32A SP MCB - 18 Nos
Run off main with 2 wires of 2.5 sq.mm. PVC insulated single core multistrand fire retardant flexible copper cable with ISI mark
Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable
Run of 4 Wires of 4 sqmm PVC insulated single core multi strand
Supply and fixing of 20A Flush type Wall Socket, 20A DP MCB and 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)
Supplying and delivery of following PVC aluminium armoured LTUG cable (PVC aluminium armoured LTUG 1100v grade) with ISI mark b) 2 core 10 sq.mm.
f) 3.5 core 25 sq.mm.
Charges for conveying and fixing of UG cables of sizes 4 to 25 Sqmm of 2, 3,3.5 and 4 core with necessary MS clamps, brass screws,TW Plugs
Supply and fixing the following Aluminium Crimping Lugs suitable for the UG cable etc to complete. c) 2 Core 10 Sqmm Cable crimping lugs
f) 3.5 Core 25 Sqmm Cable crimping lugs
Suplly and erection of 200 Amps Capacity floor mounting panel board (Cubical type)
Supplying and laying of 8 SWG GI wire on wall below ground levels with necessary ‘U’ Nails, earth work excavation and refilling etc
Supply and run of following tinned coated copper strip on surface or in recess for connections as required with necessary MS clamps /support on wall /ground for earth connection a) 25mm x 3mm
b) 25mm x 6mm
Supply and run of 2 of No.8 copper wire for earth connections -
Plate earthing with copper plate of size 600 x 600 x 3mm as per the ISI specification with an earth electrode of 2.1 m. Class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonary work and with 38mm RCC cover slab for brick masonary
Supplying Fabrication and Erection in position of M.S. scheme name and layout board with 50x50x6mm M.S. angle for vertical post and support posts with 2.5 mm thick M.S. sheet
Supply, Installation,Testing and Commissioning of Ongrid Roof top solar power plant with Renewsys / Waaree / Vikram solar panels 10.70 KWP and with INVT/JFI/equivalent inverters - 1 nos as per MNRE standards Installation charges includes formwork
Supplying of Godrej Navatal lock Ultra XL Lock with 3 keys with ISI mark etc.,
Lift arrangements Design, Supply, Delivery, Installation, Testing and Commissioning of Passenger Lift machine room less, 13 Persons / 884 Kgs / P - Passengers Speed 1.5 m/s with Stainless Steel Panels, Disable friendly, microprocessor based controller, VVVF drive, Fire rated doors and ARD
Design, Supply, Delivery, Installation,Testing and Commissioning of Passenger Lift machine room less, 24 Persons / 1632 Kgs / P - Passengers Speed 1.5 m/s with Stainless Steel Panels, Disable friendly, microprocessor based controller, VVVF drive, Fire rated doors and ARD
Annual Maintance Charges for the lift suppplied and installed for the period of four years after the free warranty period of one year including all to complete etc. For First One Year (Free) (Lift 4 Nos- 13 persons) For Second Year @ 5%
For Third Year @ 5%
For Fourth Year @ 5%
For Fifth Year @ 5%
Annual Maintance Charges for the lift suppplied and installed for the period of four years after the free warranty period of one year including all to complete etc. For First One Year (Free) (Lift 1 Nos- 24 persons) For Second Year @ 5%
For Third Year @ 5%
For Fourth Year @ 5%
For Fifth Year @ 5%
Supply and fixing of following MCB including cost of all materials, labour charges and erection charges etc a) Double Pole 40A, 10KA
b) Double Pole 6A to 32A, 10KA MCB
c) Triple Pole 63A,10KA MCB
Supply and erection of 250 Amps capacity floor mounting type metering panel board (Cubical type) (Length 4ft x Height 3ft x width 1.5ft)
Supply and erection of 125 Amps capacity floor mounting / wall mounting panel board (Cubical type) ( length 10Ft x height 6Ft x width 1.5Ft)
Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports
Supplying and laying of following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 m putting 0.15m layer of sand and covering the cable completely with bricks and sand refilling the earth Below GL a) 4 x 16 sqmm
b) 3 core 185 sq.mm
Supplying and clamping of PVC armoured LTUG cable on post or wall and ceiling with necessary MS Clamps, Brass screws, T.W. Plugs (Above GL) a) 4 core 10 sq.mm.
Supplying and fixing of brass cable gland suitable for following core and sqmm PVC armoured LTUG cable with earth strip around the gland and cable termination with crimping of terminal with lugs b) 2 core 10 sq.mm.
f) 3.5 core 25 sq.mm.
p) 4 core 16 sq.mm.
q) 4 core 10 sq.mm.
r) 3.5 core 185 sq.mm
Supply and providing cable end termination of following core and sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection a) 3.5 core x 25 sq.mm
b) 4 core x 16 sq.mm.
c) 4 core x 10 sq.mm.
d) 2 core x 10 sq.mm
r) 3.5 core 185 sq.mm
Supply and fixing of MS cable box of suitable size on wall for the entry of 4 x 10 sqm /3.5c x 25 sqm with cable gland suitable for the above size with earth connection.
Providing and fixing of lightning conducter finial, made of 25 mm dia 300 mm long, copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required (MR)
Supply, installation, testing & commissioning of 100mm dia cast iron earth electrode with flange of 2.4 metre long buried in ground, including filling with Bentonite powder and RCC manual cover. MR
Supply and fixing of twin arm suitable for 100 W BC lamp / 6 W LED lamp type aviations lamp fiting with lamps on suitable 20 mm GI pipe on the parapet wall of the terrace of the building
Supply, Installation, Testing and Commissioning of 3 KVA invertor with 30 Min battery back-up, Single Phase incoming & single Phase outgoing along with SMF batteries for emergency lighting with battery rack.
Supply, and run of 50 mm dia GI pipe on wall ( B Class ) for the drawal of earth bus (25mm x 3mm ) copper flat from the earth pit. The pipe shall be laid up to a height of 6m from the ground level to avoid theft of copper
Preparation of necessary electrical drawings for approval by CEIG, submission of drawings for approval, arrange for the inspection of the Electrical Inspectorate officials and obtaining Safety Certificate for availing suppy from TANGEDCO and commissioning the installations.
Labour charges for the GI and UPVC pipe below ground level including earth work excavation, cutting, threading, jointing, lowering, laying to proper grade and aligement and refilling the trench with excavated earth c. 50mm Dia UPVC Pipe
Supplying, delivery of following dia UPVC pipe Schedule 40/ schedule 80 of approved ISI quality Below G.L a) 50 mm dia UPVC pipes Schedule- 40
b) Supply and laying of 40 mm dia UPVC pipe Schedule- 40 (Below GL)
c) 80 mm dia UPVC pipes Schedule- 40
Supply, installation, testing and commissioning of 160 KVA Diesel Generator set complete with all accessories
Supply and Insullation for the residential silencer (supply of residential silencer is included under item for DG Sets)
Supply and installation of M.S.cable adopter box made of 14 SWG sheet steel with suitable copper bus extension link from alternator
Supply and installation of MS exhaust pipe of suitable thickness with 100mm dia upto 5m from the silencer
Supply and installation of exhaust pipe thermal insulation lagging with mineral wool as per IS 3677 / 1973 reinforced with chicken mesh and gladded with aluminium sheet of 26 SWG and 50mm thick with 64 Kg/Cu.Mtr.Density
Supply and installation of stainless steel rain hood / rain cap / bend at top of the exhaust pipe to prevent rain water entry to exhaust pipe with provision of drain plug in the system.
Preparation of necessary drawings for approval by Chief Electrical Inspector to Government / CEA, obtain approval for the same, arrange for the inspection by the Electrical Inspectorate / CEA Officials and obtain safety certificate from them for commissioning the DG set
Supply and clamping of 4 core 2.5 sq. mm PVC sheathed and armoured copper cable from alternator to the proposed DG panel on wall / in the hume pipe with necessary glands and crimping at both ends.
Supply and delivery of clear water vertical wet type (Three Phase) submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 without panel board as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM Duty:75 LPM x 175m
Labour charges for the erection of submersible pumpset in borewell /openwell including fixing and jointing submersible cable a) Above 5 HP to 10 HP
b) Above 10.00 HP to 20.00 HP
Supply and laying of PVC insulated and sheathed follwing core and sq.mm flat type copper cable confirming to IS 694/1990,cable for submersible motor a) 3 core 4 Sq.mm flate type copper cable
b) 3 core 6 sq.mm flat type copper cable
THREE PHASE PANEL BOARD- STAR- DELTA WITH TWO LEVEL GUARD AND AUTO START Supply and delivery of Star-Delta starter confirming to IS 13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/ Three Phase/50HZ (+/- 5%) and 415V (+/- 10%) a) 6 HP
Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 without panel board and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes Duty: 900LPM x 60m
Supplying, laying and jointing the following dia of UPVC Pipes with ISI mark of best approved quality a) 65 mm dia UPVC pipes schedule 40 with required UPVC specials )
Supply and erection of Cast iron Butterfly Valve with single action lever for open shut operation etc complying with relevent standard specification a) 80 mm dia Butterfly valve
Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Non-return valve of following sizes a) 80 mm G.M Non return valve
b) 40mm Non return valve for Borewell & Metro water
Supply and fixing of following dia GI Specials of best approved quality,with ISI mark a) 65mm dia GI Union
Supplying and fixing of following dia GM Wheel Valve (Heavy duty) Confirming to I.S Specifications a) 65mm GM Wheel valve with brass
Column guard Supply and fixing of rubber round column guard of size 550mm height x 75mm (two corners each 75mm ) x 10 mm thick on the existing R.C.C Columns corner surface in stilt area with reflective stickers,
Supplying and fixing of Convex Mirror 60cm dia with plastic caver and fixing in position using 50mm dia "B"GI class pipe at a height of 1.50m painted with Enamel painted framed on bottom with couch screws
Lettering & Numbering Supplying and fixing of Aluminium TNPHC Emblem of following height with approved coloured powder coat in matt finishing a) 30"
Supplying and fixing of 6" height Aluminium letters with approved coloured powder coat in matt finishing
Supplying and fixing of following dia plastic foam plate of 3mm thick with 3"height number with approved colours etc a) 5" dia
Supply and fixing of following size plastic foam name plate with vinyl cutting letter with approved colours etc a) 24"x 8"
Providing two legged scaffolding using 15cm diameter casurina props or best quality bamboo posts of 4m overall length (3m height + 0.50m projection + 0.50m into the ground ) 15.5m height in addition of 2.5m height
Supply and Erection of 7m Free Standing Double Arm Bracket 8 sided Octogonally continously tapered structured pole with base plate of size 250 x 250 x 12mm rigidly welded
Supply and fixing of following LED street light fitting with LED (Higher end) a) 80W LED
Coil earth to steet light poles with No.8 SWG GI wire of 11.5 M of length in which 10 M of total length compressed in to a coil of one meter length ( 75 mm to 100 mm dia )
Supply and fixing of SMC fuse box ( IP 65 rating) containing 1 No. 32 A 4 way terminal block, 1 No. 10 A,10 KA TPN MCB with suitable clamps fixed to the pole with lockable arrangements
Supply and erection of 63 Amps capacity floor mounting panel board (Cubical type)
Supply and fixing of 40 mm dia GI pipe 'B" class fixed to the octagonal street light pole with MS clamps up to the fuse box in the pole for the drawal of 4 core 16 sqmm / 25 sqmm Aluminium cable
Fire Fighting Arrangements MOTOR DRIVEN MAIN PUMP Supply, erection, testing and commissioning of electric motor driven pump suitable for automatic operation rated for 2280 LPM at head of 88 M
DIESEL ENGINE DRIVEN PUMP Supply, erection, testing and commissioning of main diesel engine driven pump of horizantal centrifugal type suitable for automatic operation rated for 2280 LPM at 88m head,
JOCKEY PUMP Supply, erection, testing and commissioning of mono block jockey pump rated for 180 LPM at 90 M head.
BOOSTERPUMP Supply installation testing and commissioning of 900 Lpm Pump at terrace level approved and instructed by the engineer in charge operating voltage is 415 v 3 phase 50 Hz. up to 15 HP
MOTOR CONTROL CENTRE supply, errection testing and commissioning of MV panel board made out of 16 SWG thick CRCA sheet steel duely rust inhibited, zinc pasivated and painted with approved colour epoxy paint on a coat of zincromatic primer.
Booster pump panel supply, errection testing and commissioning of MV panel board made out of 16 SWG thick CRCA sheet steel duely rust
CABLES Supply, laying and clamping of 1No. XLPE sheathed armoured/unarmoured heavy duty power cable conductors of best conductivity aluminium/Copper 1.1KV grade , strictly conforming to IS:1554(Part-I) 1964 of the following sizes a. 3C x 50 sqmm Aluminium ( Main Pump Connection)
b.3C x 10 sqmm Aluminium (Jockey Pump Connection)
c.12C x 2.5 sqmm Copper (Diesel Pump)
d 2C x 1.5 sqmm Copper (Pressure Switch connection )
e 3 C x 10 sqmm aluminium Booster pump Connection pumproom to terrace
Supply and drawing bare copper conductors of the following sizes along with wiring / cables and giving connections as required for pumps, panels etc a. 25 x 3mm GI strips
b. 8 SWG GI Wire
CABLE TRAY Supplying and fixing of perforated G.I.sheet (GI should be hot dip galvanized) following size of cable tray with neccessory angle iron suspension supports, anchor fasteners etc a) size: 150 x 50mm wide x 2mm thick
b) size: 50 x 50mm wide x 2mm thick
EXHAUST PIPE Exhuast pipe for Diesel engine of 100 mm dia with mineral wool insulation, accoustic suppression with aluminum sheet
ABOVE GROUND PIPING Supply ,laying testing and commissioning of MS "B"class pipe( Medium/ Heavy as required by the departmental officers) with all specials like Tee, Elbow, reducer etc. a) 250mm dia MS "B"class pipe (Heavy)
b) 200mm dia MS "B"class pipe
c) 150mm dia MS "B"class pipe
Supplying, laying, fitting and fixing , testing and commissioning of MS"B"class (Heavy/Medium as required by the departmental officers) pipe line confirming to IS 1239 including earth work excavation in all class of soil to the depth as per requirements of standard and refilling and compacting the trench a. 150mm dia MS "B"class pipe
b. 100mm dia MS "B"class pipe
c. 80mm dia MS "B"class pipe
d.50mm dia MS "B"class pipe
e. 25mm dia MS "B"class pipe
Butterfly valve Supply, installation, testing and commissioning of Butterfly valves with following sizes, lever operated cast iron body flanges drilled to IS 1538 PN 1.6 grade complete , as per IS 780 etc. a. 200 mm dia Butterfly valve
b. 150 mm dia Butterfly valve
C. 100 mm dia Butterfly valve
d. 80 mm dia Butterfly valve
e. 50 mm dia Butterfly valve
Ball valve Providing and fixing following size Ball valve PN 20 with hard chrome plated ball inside PTFE (Teflon) seat & ring with chrome plated centre handle with female BSP threads a.25 mm Ball valve
b. 15mm Ball valve
Non Return valve Supply installation ,testing & commissioning of Non Return valve of following sizes with out by pass arrangement ,swing check type with cast iron body flanges drilled a. 200mm dia Non Return valve
b. 100mm dia Non Return valve
c. 80mm dia Non Return valve
d. 50mm dia Non Return valve
Air Release Valve: Supply , installation, testing and commissioning of 19mm dia meter air release valu e mdae of gun metal complete and made functional
AIR VESSEL TANK Supply ,installation ,testing & Commissioning of air vessel made of mild steel of 200MM dia with automatic air release cock, 25mm dia drain valve and shut off. The vessel shall be 120cm. in height etc.
MS STRUCTURAL WORKS Providing and fixing M.S structural work fabricated from standard sections e.g. M.S. rounds, angles, channels, plates
PRESSURE SWITCH Supply, installation, testing pressure switch bellow type for the automatic operation,as approved and instructed by the engineer in charge.
PRESSURE GAUGE Supply installation testing and commissioning of pressure gauge oil type 4 inch dial as approved and instructed by the engineer in charge.
Foot Valve Supply installation ,testing & commissioning of Non Return valve of following sizes with out by pass arrangement, Ball type with cast iron body flanges drilled etc. a. 250mm Dia Foot Valve
b. 80mm Dia Foot Valve
PRIMING TANK Supply installation ,testing & commissioning of PVC 2 Layer black of capacity 1000 Lit with required accessories.
HYDRANT VALVE Supply installation ,testing and commissioning of Single/Double Headed Hydrant valve confirming to IS 5290 with ISI mark of 63mm dia oblique type with instantaneous hose coupling adaptor etc complete as required.
FIRE BRIGADE Supplying ,installation of following SS fire brigade inlet connection of 4 nos. 63mm dia instantaneous type male coupling with built in check valves and 150mm dia flanged outlet complete with bolts, nuts and rubber insertions as per I.S:904. (to be connected to static tank). with required M.S. Cabinet a) 2- Way Inlet fire brigade
b) 4-way Inlet fire brigade
HOSE CABINET Supplying ,installation of hose cabinet to accommodate two pieces of hose reel of 15 M length along with one pair of male and female coupling and one/two branch pipe a. Hose cabinet of External type (Double Door & to accomodate Two hose and the Branch Pipe) stilt floor
b. Hose cabinet of External type ( Single Door & to accomodate One hose and the Branch Pipe) for 8 blocks (1 floor 1 No)
Supply, installation, testing and commissioning of Controlled Percolating (CP) Hose ISI marked (IS:8423) 63 mm dia x 15 m long complete with instantaneous type S.S. 63 mm dia, ISI marked Male & Female couplings (IS:903) bound and riveted to hose pipe with copper rivets and 1.5 mm copper wire. (For external & Internal hydrants)
FIRE HOSE REEL Supply ,installation, testing and commissioning of Fire Hose Reel (as per ISI) wall mounted, swinging type18 SWG MS sheet, fitted with 20 mm dia x 30 M long, high pressure hose with 5 mm outlet nozzle with all necessary fixing materials complete.
BRANCH PIPE Supply ,installation ,testing and commissioning of short branch pipe with 63mm female instantaneous inlet made of gun metal, male threaded outlet, complete with hexagonal based nozzle heavy quality conforming IS 903 etc as approved and directed by the engineer.
Supply installation testing & commissioning of 19mm nominal bore quartzoid bulb type sprinkler of Tyco/HD make, K factor 5.6, Crome Finish, suitable for operating at 68degree C. The fixing shall be done as per IS specification
DRY CHEMICAL POWDER TYPESupply and fixing of dry chemical powder type (ABC Type) of 6 Kg capacity, Pressurized with nitrogen, mfgd to IS:13849 with ISI mark
Supply and fixing Co2 type (2Kg) fire extinguisher new seamless cylinder with powder coated finish, made out of Manganese steel with initial fills, hose, wall brackets, nuts, bolts etc
Supply, Erection, Testing and Commissioning of 120 Watts Amplifier w/Power supply unit battery charger 16 Zone switcher control and Microphone with required rack.
Supply, Erection, Testing and Commissioning of 6 Watt Box Speaker units.
CABLES Supply and laying of 2c X 1sq.mm FRLS flixable Cable with 25mm pvc condit pipe including cost of materials and labour charegs in all etc
ZONE PANEL Supply installation testing and commissioning of conventional type C & I panel having capacity to connect zone panel with necessary indications, solid - state circuitary with visual front and alarm display.
HOOTERS Supply installation, testing and commissioning of 12W,electronic hooters ( sounders ) with accessories for sounding the alarm when activated.
MANUAL CALL POINT Supply installation testing and commissioning of Manual Call points of break glass type with hammer and chain.
Conventional Smoke Detector Supply installation testing and commissioning of Manual Call points of break glass type with hammer and chain.
CABLES Supply and surface laying of 2c X 1.5sq.mm shielded FRLS armoured cable including cost of materials and labour charegs
Supplying and fixing of single leaf door shutter by using Best Indian T.W. Marine door shutters with 9mm thick phenol bonded BWR grade plywood a. 750 x 2100 mm
Please Enable Macros to View BoQ information
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
Tendernotice_1.pdf
PDF • 0.58 MB
BOQ_764835.xls
BOQ • 0.48 MB
TenderdocumentsatNew.pdf
Tender Documents • 22.50 MB
PQDoc.pdf
Additional Documents • 0.46 MB
Download all tender documents and submit your bid