Supply, Installation, testing, commissioning of Landscaping, Mechanical, Electrical, Plumbing, Architectural Lighting, Fire Fighting and Networking Work of Museum at Jyotisar

Amount

Supply installation and fixing Audio / Dimmer Rack - 19 " - 36 U Rack, 600 mm wide with Aluminum frame and 1000 mm depth, top bottom side panel and rear door of CRCA Sheet size 1 mm, front door with Aluminum section and acrylic/glass sheets, with minimum specifications as specified in the tender

Supply installation testing and commissioning of IP66 RGBW LED DMX based flood Light of minimum consumption of 40-50 Watt as per approved make with minimum specifications as specified in the tender.

Supply installation testing and commissioning of IP66 RGBW LED DMX based flood Light of minimum consumption of 150-165 Watt for façade as per approved make with minimum specifications as specified in the tender.

Supply installation testing and commissioning of IP66 RGBW LED DMX based flood Light of minimum consumption of 40-50 Watt for Dome as per approved make with minimum specifications as specified in the tender.

Supply installation testing and commissioning of IP66 RGBW LED DMX based flood Light of minimum consumption of 150-165 Watt for Dome as per approved make with minimum specifications as specified in the tender.

Supply installation testing and commissioning of IP66 White light LED DMX/RDM based 230W Exterior projection as per approved make with minimum specifications as specified in the tender.

Supply installation testing and commissioning of IP66 RGBW LED DMX based flood Light of minimum consumption of 150-165 Watt for trees as per approved make with minimum specifications as specified in the tender.

Supply, installation, testing and Commissioning of 5 Channel 512 DMX Splitter with minimum specifications as specified in the tender.

Supply installation testing and commissioning of Personal Computer with interfaces as per the technical specifications PC with flat screen 27” display screen complete with keyboard mouse etc. for Lighting with minimum specifications as specified in the tender.

Supply installation testing and commissioning of DMX Cable : RS-485, 1 Pair 24AWG (7x32) Tinned Copper, PE Insulation, Overall Beldfoil®+Tinned Copper Braid(90%) Shield, PVC Outer Jacket, CM with minimum specifications as specified in the tender

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single Red colour on front side as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 m long etc. with charcoal/ coke and salt as required.. (BODY EARTHING)

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supply and making Indoor cable end jointing with cast resin compund, including lugs and other jointing materials for following size of 3 core, XLPE aluminium conductor cable of 11KV (UE) grade as required. - 3 C x 240 Sq.mm ( 11KV UE )

Supply and making Outdoor cable end jointing with cast resin compund, including lugs and other jointing materials for following size of 3 core, XLPE aluminium conductor cable of 11KV ( UE )grade as required. - 3 C x 240 Sq.mm ( 11KV UE )

Supply and Making Straight Through Cable Jointing With Cast Resin Compund, Including Ferrule & Other Jointing Materials for Following Size of 3 core, XLPE Aluminium conductor cable of 11KV ( UE )grade as required. - 3 C x 240 Sq.mm ( 11KV UE )

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. confoming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. - 63 mm dia (OD-63 mm & ID-51 mm nominal)

Laying of One Number PVC Insulated And PVC Sheathed / XLPE Power Cable of 1.1 kV Grade of Following Size Direct in Ground Including Excavation, Sand Cushioning, Protective Covering and Refilling the Trench etc. as required. - 4 core Upto 35 sq. mm

Laying of One Number PVC Insulated And PVC Sheathed / XLPE Power Cable of 1.1 kV Grade of Following Size Direct in Ground Including Excavation, Sand Cushioning, Protective Covering and Refilling the Trench etc. as required. - 4 core Above 35 sq. mm and upto 95 sq. mm

Laying of One Number PVC Insulated And PVC Sheathed / XLPE Power Cable of 1.1 kV Grade of Following Size Direct in Ground Including Excavation, Sand Cushioning, Protective Covering and Refilling the Trench etc. as required. - Above 95 sq. mm and upto 185 sq. mm

Laying of One Number PVC Insulated And PVC Sheathed / XLPE Power Cable of 1.1 kV Grade of Following Size Direct in Ground Including Excavation, Sand Cushioning, Protective Covering and Refilling the Trench etc. as required. - Above 185 sq. mm and upto 400 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation and refilling the trench etc. as required, but excluding sand cushioning and protective covering. - Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required. - Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. - Above 120 sq. mm and upto 400 sq. mm

Supplying and Making End Temination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required. - 3½ X 25 sq. mm (28mm)

Supplying and Making End Temination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required. - 3½ X 35 sq. mm (32mm)

Supplying and Making End Temination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required. - 3½ X 50 sq. mm (35mm)

Supplying and Making End Temination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required. - 3½ X 70 sq. mm (38mm)

Supplying and Making End Temination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required. - 3½ X 95 sq. mm (45mm)

Supplying and Making End Temination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required. - 3½ X 120 sq. mm (45mm)

Supplying and Making End Temination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required. - 3½ X 150 sq. mm (50mm)

Supplying and Making End Temination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required. - 3½ X 185 sq. mm (57mm)

Supplying and Making End Temination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required. - 3½ X 240 sq. mm (62mm)

Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 31⁄2 X 240 sq. mm

Charges towards sanction of load and seeking approval from concerned department

Supplying,installation,testing & commissioning of 'B' Class MS Pipe exhaust piping / chimney up to top level made out of suitable dia M.S piping complete with bends, duly painted with primer and insulated with 50 mm thick layer of LRB rock wool having 100 kg / m density, white wool. Finishing of the insulation shall be with chicken wire mesh and 26 kg.Aluminium sheet cladding all around exhaust pipe provided with self tapping screws complete as required. - 200 mm Dia Pipe - 4.85 mm Thickness

Supply & Fixing of 75mm Thick Compressed Mineral Wool Insulation for DG Exhaust Pipe With 24 Gauge Aluminium Sheet Cladding etc as Required for The Under Mentioned Dia Pipe - 150 mm Dia Pipe (Insulation)

Supply of Aluminium Cladding as per technical specifications for DG Set Exhaust

Supply , installation , testing and commissioning 400 A FP MCCB of 35 KA breaking Capacity in metal sheet enclosure with ON/OFF, TYB Indication lamps for Incoming of UPS Complete in All Respect as Required.

LT Panel for ADMN BUILDING as per technical specifications below : Design, manufacture, supply, installation, testing and commissioning of cubicle type panel fabricated out of CRCA sheet steel , floor mounted totally enclosed switchbaord suitable for use of 415 volts , 3 phase, 50 HZ complete with aluminium bus bar and all accessories including supply and fixing of following incoming and outgoing switchgears, Panel Should Have Double Earthing Provision which connected to the nearest earth grid. INCOMER : 315 AMP FP MCCB BUS BAR : 400 AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 0.6 sq mm / amp. The Maximum allowable temperature for the Bus bar to be restricted to 90 deg C. The temperature rise should be restricted to 45 deg C above ambient temperature. OUT GOINGS : 20 No 63 AMP 4P MCB WITH THERMAL MAGNETIC PROTECTION AND INDICATION LAMPS 3 NOS 100 AMP 4P 25 KA MCCB WITH INBUILT PROTECTION AND INDICATION LAMPS complete panel as above and complete

UPS PANEL Design, manufacture, supply, installation, testing and commissioning of cubicle type panel fabricated out of CRCA sheet steel , floor mounted totally enclosed switchbaord suitable for use of 415 volts , 3 phase, 50 HZ complete with aluminium bus bar and all accessories including supply and fixing of following incoming and outgoing switchgears, Panel Should Have Double Earthing Provision which connected to the nearest earth grid. INCOMER : 2 Nos 400 AMP 25 KA 4P MCCBS , EACH WITH IN BUILT PROTECGTION AND INDICATION LAMPS BUS BAR : 800 AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 06 sq mm / amp. The Maximum allowable temperature for the Bus bar to be restricted to 90 deg C. The temperature rise should be restricted to 45 deg C above ambient temperature. OUT GOINGS : 8 No 63 AMP DP MCB WITH INDICATION LAMPS 1 Nos. 325A, FP MCCB (ADMIN ) 4 Nos. 315 A, FP MCCB ( BEFOR WAR, WAR, EXHIBITION ) 3 Nos. 160A, FP MCCB (GAL-01,02,03) complete panel as above and complete

SDB-2,3,4 FOR ( BEFORE WAR, WAR AND EXHIBTION ) as per technical specifications below : Design, manufacture, supply, installation, testing and commissioning of cubicle type panel fabricated out of CRCA sheet steel , floor mounted totally enclosed switchbaord suitable for use of 415 volts , 3 phase, 50 HZ complete with aluminium bus bar and all accessories including supply and fixing of following incoming and outgoing switchgears, Panel Should Have Double Earthing Provision which connected to the nearest earth grid. INCOMER : 315 AMP FP MCCB BUS BAR : 400 AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 0.6 sq mm / amp. The Maximum allowable temperature for the Bus bar to be restricted to 90 deg C. The temperature rise should be restricted to 45 deg C above ambient temperature. OUT GOINGS : 20 No 63 AMP 4P MCB'S WITH INDICATION LAMPS 4 NOS 100 AMP 25 KA MCCBS WITH INBUILT PROTECTION AND INDICATION LAMPS complete panel as above and complete

SDB-5,6 ( FOR AFTER WAR AND BHAGAWAD GITA ) as per technical specifications below : Design, manufacture, supply, installation, testing and commissioning of cubicle type panel fabricated out of CRCA sheet steel , floor mounted totally enclosed switchbaord suitable for use of 415 volts , 3 phase, 50 HZ complete with aluminium bus bar and all accessories including supply and fixing of following incoming and outgoing switchgears, Panel Should Have Double Earthing Provision which connected to the nearest earth grid. INCOMER : 200 AMP FP MCCB BUS BAR : 250 AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 0.6 sq mm / amp. The Maximum allowable temperature for the Bus bar to be restricted to 90 deg C. The temperature rise should be restricted to 45 deg C above ambient temperature. OUT GOINGS : 16 No 63 AMP 4P MCB WITH INDICATION LAMPS 3 NOS 100 AMP 25 KA MCCBS WITH INBUILT PROTECTION AND INDICATION LAMPS complete panel as above and complete

SDB-7,8,9 (GALLLERYS-01,2 AND 3) as per technical specifications below : Design, manufacture, supply, installation, testing and commissioning of cubicle type panel fabricated out of CRCA sheet steel , floor mounted totally enclosed switchbaord suitable for use of 415 volts , 3 phase, 50 HZ complete with aluminium bus bar and all accessories including supply and fixing of following incoming and outgoing switchgears, Panel Should Have Double Earthing Provision which connected to the nearest earth grid. INCOMER : 125 AMP FP MCCB BUS BAR : 160 AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 0.6 sq mm / amp. The Maximum allowable temperature for the Bus bar to be restricted to 90 deg C. The temperature rise should be restricted to 45 deg C above ambient temperature. OUTGOING 8 No 63 AMP 4P MCB WITH INDICATION LAMPS All Items complete as above

Supplying of Following sizes 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing laid in ground including cost of digging upto required depth, 150 mm sand all around the cable, brick protection and back filling, clamped to wall with suitable clamps including saddles fixing bolts, Connection Testing and commissioning as Required. - 3x6 sqmm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation and refilling the trench etc. as required, but excluding sand cushioning and protective covering. - Upto 35 sq. mm

Supplying of Following sizes 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing trenches/pipes, cable trays, ducts, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning as Required. - 2x6 sqmm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required. - Upto 35 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. - 3 core 2.5 sq.mm (for 8/4 Mtr Poles)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. - 63 mm dia (OD-63 mm & ID-51 mm nominal)

Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Power Cable Insulated amoured cable confoming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etc and should be NABL certified as required. - 3.5 C X 240 Sq.mm Al. XLPE am.

Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Power Cable Insulated amoured cable confoming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etc and should be NABL certified as required. - 3.5 C X 185 Sq.mm Al. XLPE am.

Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Power Cable Insulated amoured cable confoming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etc and should be NABL certified as required. - 3.5 C X 150 Sq.mm Al. XLPE am.

Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Power Cable Insulated amoured cable confoming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etc and should be NABL certified as required. - 3.5 C X 120 Sq.mm Al. XLPE am.

Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Power Cable Insulated amoured cable confoming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etc and should be NABL certified as required. - 3.5 C X 95 Sq.mm Al. XLPE am.

Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Power Cable Insulated amoured cable confoming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etc and should be NABL certified as required. - 3.5 C X 70 Sq.mm Al. XLPE am.

Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Power Cable Insulated amoured cable confoming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etc and should be NABL certified as required. - 3.5 C X 50 Sq.mm Al. XLPE am.

Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Power Cable Insulated amoured cable confoming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etc and should be NABL certified as required. - 3.5 C X 35 Sq.mm Al. XLPE am.

Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Power Cable Insulated amoured cable confoming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etc and should be NABL certified as required. - 3.5 C X 25 Sq.mm Al. XLPE am.

Supply & Testing of following 11 KV( UE) grade multicore Aluminium conductor XLPE insulated cable, insulation screening with extruded semi conducting compound in combination with copper tape amoured cores laid up, inner sheath of PVC tape, galvanised steel flat strip amoured and overall PVC sheathed cable confoming to IS: 7098 (Part - II) and complete with all latest amendments etc. complete as required. - 3 C x 240 Sq. mm 11 KV (UE)

SITC of shock treatment chart (prescribed under I.E.rules) duly framed with glass and supported from back with hard board with supply of all material labour T & P etc for proper completion of work. (Approx front area = 1.20 sq M)

SITC of First aid box as approved by Indian red cross confoming to IS : 2217.

SITC of CO2 Fire Extinguishers 4.5 kg capacity complete in all respect ISI : 15683 marked

SITC of ABC FIRE EXTINGUISHER 4 KG capacity complete in all respect ISI : 15683 marked

SITC of Fire Bucket stand made of M S angle suitable for and with 4 Nos Fire Buckets of 9.5 Ltrs capacity as per technical specifications.

SITC of of rubber gloves of 11 KV grade as per IS : 4770.

SITC of cable route marker as per technical specifications.

SITC of ANTI SKID RUBBER MAT 1 MKT x 2 MKT. 3mm thick ISI - 15652 marked as per technical specifications.

Supplying of Following sizes 1100 volt grade XLPE insulated PVC sheathed aluminium conductor amoured cables as per specification in existing laid in ground including cost of digging upto required depth, 150 mm sand all around the cable, brick protection and back filling, clamped to wall with suitable clamps including saddles fixing bolts, Connection Testing and commissioning as Required. - 3x6 sqmm

Supplying of Following sizes 1100 volt grade XLPE insulated PVC sheathed aluminium conductor amoured cables as per specification in existing trenches/pipes, cable trays, ducts, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning as Required. - 2x6 sqmm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. - 3 core 2.5 sq.mm (for 8/4 MKT Poles)

Supply, intastallation, Testing & Commissioning of 500 KVA Capacity Radiator cooled DG Set with Suitable Standard AMF Panel & suitable capacity engine directly coupled with alternator for 415 volt, 3 phase, 50 Hz, 4 wire, Generation system complete with accessories, Fuel Oil Tank & Control Panel etc as Required and sound proof acquastic enclosure for the DG SET (75 db @ 1m) , including supply, fixing of antivibration pads suitable for 500 KVA DG Set as per standards of Engine manufacture, provision of conrol cable from engine to control panel to engine. Provision of pipe fuel pipe line of suitable size from fuel tank to engine and over flow pipe engine to fuel tank complete gate valve and fitting leader maker etc. Supply , Intallation of starting batteries of suitable AH as recommended by manufacterer Heavy duty complete as required at site complete with stand and battery charger residentials silencer sutaible for diesel engine exhaust pipe line complete complete flange, bend, flexible pipe all as required and as directed by Engineer Incharge. 500 kVA DG Set Diesel Engine (CPCB-2 NORMS COMPLANT) 4 Stroke, Radiator Cooled, Diesel Engine Model Developing Output Prime 400 KW Having Following Arrangement :- Flywheel With Starter Ring for Generating Set Air Filter , Lube Oil Cooler Assembly with Accessories. Exhaust Air Manifold Exhaust Bellow Fuel Fiter Diesel engine pre heating arrangement Lube Oil Filter Exhaust Gas Turbo Charger with After Coller Day Tank For fuel with Markings ECP Panel mounted on a Separate Frame. Radiator with Pusher Type Fan, With Fan Guard, Coolant Pump 12V Electrical Starting System with Starter Motor and Battery Charging Alternator Engine Mounting Supports ALTERNATOR Rated at 500 KVA, 415 Volts, 3 Phase, 4 Wire, 0.8 P.F (lag), 50HZ, 1500 RPM, IN Accordance with IS 4722 /IEC 60034 as per following Specification : Rating: Suitable for an over-load of 10% for 1 hour in every 12 hours operation. Voltage Regulation: Provided with Fast Response Thyristor Type Electronic automatic voltage regulator, which holds output voltage within desired limits. (+/- 1%). Excitation: Self Excited - Self Regulated. Alternator Loading: Suitable for Taking Rated load Immediately After Machine Reaches Rated Voltage and Speed. Vibration: Suitable for Direct Coupling with Engine and Mounted on Common M.S. Channel Base Frame. Enclosure: Screen protected drip proof enclosure with IP – 23 degree of protection. Cooling: Air Cooled type with radial fan mounted on Rotor. Winding and Insulation: Insulation class H as defined in IEC – 60034-1 ACCESSORIES :- MS Base Frame Suitable for Mounting of the Offered Engine and Alternator. Day Fuel Tank of Standard Capacity as per Rating Complete Fuel Gauge, Inlet/Outlet Connections, Drains Plug, Etc. Residential Silencer (1.5 Meter with 750 mm dia Approx) Including Insulation of Silencer. 1 Nos 24 Volts DC Battery of SUITABLE Capacity with Leads. 1 Set of AVM Pads Fitted in Base Frame. DG ACCESSORIES:- Supplying,installation,testing & commissioning of 'B' Class MS Pipe exhaust piping / chimney up to top level made out of suitable dia M.S piping complete with bends, duly painted with primer and insulated with 50 mm thick layer of LRB rock wool having 100 kg / m density, white wool. Finishing of the insulation shall be with chicken wire mesh and 26 kg.Aluminium sheet cladding all around exhaust pipe provided with self tapping screws complete as required. 200 mm Dia Pipe - 4.85 mm Thickness - Quantity = 25 metre. Supply & Fixing of 75mm Thick Compressed Mineral Wool Insulation for DG Exhaust Pipe With 24 Gauge Aluminium Sheet Cladding etc as Required for The Under Mentioned Dia Pipe 150 mm Dia Pipe (Insulation) - Quantity = 10 metre Supply of SS Bellow.

UNINTERRUPTED POWER SUPPLY (UPS) - 2* 200 KVA Supply of 2*250 Kva Online UPS, IGBT UPS (Transformer-less Design). Supply of SMF Batteries (12Volt VRLA SUITABLE TO UP 200 KVA FOR 15 MIN) Fully rated Inbuilt static switch at the inverter output and 100% rated Inbuilt static switch at the static bypass line integrated in UPS module. Supply of Local Accessories (like Cabling Between UPS and the Battery onsidering Cable Routing ,Battery Interlinks ,Battery Rack etc). Backfeed protection at Mains & Bypass(Inbuilt / External). Installation and Commissioning Of 2 * 200 5 kVA UPS, Battery and Accessories.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the Fan Box etc. as Required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. - 4 x 10 sq.mm. + 2 x 6 sq.mm. Earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. - 4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc.recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to to the entire satisfaction of the Engineer-in-Charge of the work. - SPN DB Double Door 8 way ( 2 incoming and 6 outgoing)

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc.recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to to the entire satisfaction of the Engineer-in-Charge of the work. - SPN DB Double Door 12 way ( 2 incoming and 10 outgoing)

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc.recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to to the entire satisfaction of the Engineer-in-Charge of the work. - TPN DB Horizontal type Double Door 8 way ( 8 incoming 3phase*8 outgoing)

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc.recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to to the entire satisfaction of the Engineer-in-Charge of the work. - TPN DB Horizontal type Double Door 12 way ( 8 incoming 3phase*12 outgoing)

Supply and erection of miniature circuit Breaker/isolator 240/415 V in the existing distribution board including making necessary connections:- - 6 amp. to 32 amp Single Pole

Supply and erection of miniature circuit Breaker/isolator 240/415 V in the existing distribution board including making necessary connections:- - 40 amp to 63 amp. MCB's FOUR POLE

Supply and erection double pole/Four pole Residual (RCCB/ELCB) on 240/415V, 5Hz. AC supply installed in existing sheet steel enclosures including making necessary connections and bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. - DP RCCB 30ma sensitivity , 40 A

Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. - MS perforated cable tray painted with powder coating 100 X 50 X 1.6 mm3

Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. - MS perforated cable tray painted with powder coating 200 X 50 X 1.6 mm3

Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. - MS perforated cable tray painted with powder coating 375 X 50 X 2 mm3

Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. - MS perforated cable tray painted with powder coating 600 X 50 X 2 mm3

Supplying and drawing of 1 no UTP 4 pair CAT 6 LAN Cable in the existing surface/recess MS/PVC conduit as required

Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe - Group A

Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe - Group B

Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe - Group C

Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin socket and 1 no 15/16 Amp switch required MS Box etc complete as required - Group A

Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin socket and 1 no 15/16 Amp switch required MS Box etc complete as required - Group C

Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required. 3 run of Size 2.50 Sqmm(1.1.80mm)

Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable Group C 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 6 Sqmm(1/2.80mm) 2 run of Size 4 Sqmm(1/2.24mm)

Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable Group C 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 10 Sqmm(1/3.50 mm) 2 run of Size 4 Sqmm(1/2.24mm)

Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required. 3 run of Size 1.50 Sqmm(1/1.40mm)

Wiring for Twin control ight point with 2 nos , 2-ways, 5 amp. switch in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. - Group A

Wiring for Twin control ight point with 2 nos , 2-ways, 5 amp. switch in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. - Group B

Wiring for Twin control ight point with 2 nos , 2-ways, 5 amp. switch in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. - Group C

Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch squired GI Box ,modular face plate etc complete as required - Group A

Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch squired GI Box ,modular face plate etc complete as required - Group B

Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch squired GI Box ,modular face plate etc complete as required - Group C

PVC CONDUIT and MS/GI BOX only for LIGHT/FAN/Call bell point wiring - Group A

PVC CONDUIT and MS/GI BOX only for LIGHT/FAN/Call bell point wiring - Group B

PVC CONDUIT and MS/GI BOX only for LIGHT/FAN/Call bell point wiring - Group C

PVC CONDUIT and MS/GI BOX only for 3 pin 5 amp. plug point - Group A

PVC CONDUIT and MS/GI BOX only for 3 pin 5 amp. plug point - Group B

PVC CONDUIT and MS/GI BOX only for 3 pin 5 amp. plug point - Group C

PVC CONDUIT and MS/GI BOX only for 3 pin 15 amp. plug point - Group A

PVC CONDUIT and MS/GI BOX only for 3 pin 15 amp. plug point - Group C

Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in Charge of work. - PVC pipe of 25 mm dia.

Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in Charge of work. - PVC pipe of 32 mm dia.

Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. - 1 & 2 Modules including combined plate for Telephone and data

Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. - 3 Modules

Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. - 4 Modules

Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. - 6 Modules

Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. - 8 Modules

Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. - 12 Modules

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. - 5 amp 1 way switch

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. - Blanking plate

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. - RJ 45 Computer DATA socket outlet for CAT 6 or CAT6e cable Modular type

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. - USB Charger, 1000mA, 5V, 1 Module

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. - 5 amp 2 way switch

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. - 15 amp 1 way switch

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. - 5 amp Socket

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. - 15 amp 6 pin Socket

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. - Bell Push

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. - step type Fan Regulator 2 modules 300 watt

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. - Telephone Socket outlet modular type

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. - T.V. Socket outlet modular type

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. - metal clad outlets

Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. - metal clad outlets

Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. - metal clad outlets

Providing and fixing following rating and breaking capacity and pole MCCB with microproecessor releaeas and teminal spreaders in cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. - 100 AMP 4P, 25 kA

Providing and fixing following rating and breaking capacity and pole MCCB with microproecessor releaeas and teminal spreaders in cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. - 160 AMP,4P, 25kA

Supply of Wall Mounted BRACKET light fitting suitable for 20 Watt LED Light with all accessories as required. - As per sample to be approved by Architects

Supply of Surface Mounted Energy Efficient, LED Luminaires 60 LED DOWN LIGHT (Round) Sutaible for 220v Single Phase Supply complete with driver circuit including making connections etc.as required. (Technical Data - System power 12W, CRI ≥80, Power Factor ≥0.95, System Luminous Efficacy ≥120). - As per sample to be approved by Architects

Supply of Surface Mounted Energy Efficient, LED Luminaires 40 W LED DOWN LIGHT (Round) Sutaible for 220v Single Phase Supply complete with driver circuit including making connections etc.as required. (Technical Data - System power 15W, CRI ≥80, Power Factor ≥0.95, System Luminous Efficacy ≥120). - As per sample to be approved by Architects

Supply of Surface Mounted Energy Efficient, LED Luminaires 15 WATT TRACK WITH 5 LIGHTS Sutaible for 220v Single Phase Supply complete with driver circuit including making connections etc.as required. (Technical Data - System power 18W, CRI ≥80, Power Factor ≥0.95, System Luminous Efficacy ≥120) - As per sample to be approved by Architects

Supply, of Linear & Compact 10W Mirror Light with Decorative Grey Caps, Polycarbonate Body & Ribbed Opal Diffuser. (Technical Data - System power 10W, CRI ≥80, Power Factor ≥0.95, System Luminous Efficacy ≥120) - As per sample to be approved by Architects

Supply of LED Luminaires BATTEN 40W LED Tube Light of Box Type prewired Indoor Luminaire with Energy Efficient Electronic Ballast, with End Caps Complete as Required. (Technical Data - System power 40W, CRI ≥80, Power Factor ≥0.95, System Luminous Efficacy ≥120) - As per sample to be approved by Architects

Supply of LED Luminaires BATTEN 20W LED Tube Light of Box Type Prewired Indoor Luminaire with Energy Efficient Electronic Ballast, with End Caps Complete as Required.(Technical Data - System power 20W, CRI ≥80, Power Factor ≥0.95, System Luminous Efficacy ≥120) - As per sample to be approved by Architects

Supply, installation, testing and commissioning of Solar Day Tube Light with all Accessories as required - As per sample to be approved by Architects

Supply, installation, testing and commissioning of Solar Day Tube Light with all Accessories as required - As per sample to be approved by Architects

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. - As per sample to be approved by Architects

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. - 3 core 2.5 sq mm

Supply of AC 230/250 Volts, 50 HZ - 1200mm Ceiling Fan With Standard Down Rod, Blades, 2 Nos Caps etc. ISI Marked Complete as Required. - 1200 mm sweep

Supply of AC 230/250 volts, 50 HZ - 300mm Exhaust Fans Including Providing Nuts, Bolts, Mounting Frame and Other Accessories etc. Complete - 450 mm sweep 900 rpm

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as Required.

Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required. 2 run of Size 4 Sqmm+ 1 run of szie 2.5 sq mm

Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required. 2 nos 1 run of Size 6 Sqmm+ 1 run of szie 4.0 sq mm - circuit wiring for lihgts and 20 amp power points

Supplying, installation, testing & commissioning for Bollard Lights 9 W, ht not more than 4ft , warm white as per the designs and sample

Supplying, installation, testing & commissioning for dye caste aluminum Wall recessed Lights for uplighters ; 9W -15W; warm white as per the designs and sample

Supplying, installation, testing & commissioning for Drive over up lights, 9W, warm white as per the designs and sample

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. SPN DB Double Door 12 way ( 2 incoming and 10 outgoing)

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. SPN DB Double Door 16 way ( 2 incoming and 14 outgoing)

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. TPN DB Horizontal type Double Door 8 way ( 8 incoming 3phase*8 outgoing)

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. TPN DB Horizontal type Double Door 12 way ( 8 incoming 3phase*12 outgoing)

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. Vertical TPN DB Double Door 6 way ( 8 incoming 3phase*6 outgoing)

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. Vertical TPN DB Double Door 8 way ( 8 incoming 3phase*8 outgoing)

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. Vertical TPN DB Double Door 12 way ( 8 incoming 3phase*12 outgoing)

Lighting control panel with distribution board and necessary fittings and cabling

5/15 Amp, 3 pin Single socket outlet in IP 67 enclosure as per technical specifications.

2 Nos. 5/15 Amp, 3 pin two way gang socket outlet in IP 67 enclosure as per technical specifications.

Supplying, installtion, testing and commissioning of grid interactive synchronisation panel for solar power. As per specifications

Supplying, installtion, testing and commissioning of grid interactive roof top solar photo voltaic gnereration system inclduing the space frames etc. As per specifications - kwp This item includes Solar Panel, Supporting Structure, AC Cable, DC Cable, Batteries, Metering, Control Room Equipment, DCDB, Inverter, etc

Control Cabling ( PVC insulated and PVC sheathed, amoured, Copper Conductor of 1.1 KV grade on existing cable trays). - 5C x 1.5 Sq. mm

SUBHEAD-II (A): FIRE HYDRANT WORKS (DSR 2019) Fire Hose Cabinet Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, confoming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : - Single headed Gunmetal

Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. confoming to IS 636 (type-A) as required : - Gun Metal

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. - 150 mm dia.

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diam size nozzle confoming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : - Providing and fixing of standard short size GM branch pipe with nozzle of 20mm nomnal bor outlet with instaneous type 63 mm dia coupling complete IS marked & TAC approved.

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection confoming to IS 904 as required : - 2 way - 100 mm dia M.S. Pipe

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection confoming to IS 904 as required : - 4 way - 150 mm dia M.S. Pipe

FIRE PUMPS - DIESEL Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) - 1620 lpm at 70 m Head.

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.

Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) - 180 lpm at 70 m Head

COMMON PANEL IN FIRE PUMP HOUSE. Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.

Supplying and laying 25 mm x 5 mm. G.I. strip in 40 mm dia. G.I. Pipe from earth electrode, as required.

Providing & fixing 25mm x 5mm G.I. strip on surface or in recess for connections etc. as required.

Providing and Fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing alongwith existing surface/ recessed conduit/ submain wiring/ cable as required.

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe confoming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : - 25 mm nominal bore (class C)

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe confoming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : - 80 mm nominal bore (class C)

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe confoming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : - 100 mm nominal bore (class C)

Laying and fixing of One number PVC Insulated and PVC Sheathed/XLPE power cable of 1.1 kV grade of size not exceeding 35 sqmm on surface as required.

Laying and fixing of One number PVC Insulated and PVC Sheathed/XLPE power cable of 1.1 kV grade of size exceeding 35 sqmm but not exceeding 95 sqmm on surface as required.

Laying and fixing of One number PVC Insulated and PVC Sheathed/XLPE power cable of 1.1 kV grade of size exceeding 95 sqmm but not exceeding 185 sqmm on surface as required.

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe confoming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : - 150 mm nominal bore (class C)

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe confoming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : - 200 mm nominal bore (class C)

SUBHEAD-III (A): PIPING FOR FIRE FIGHTING SYSTEM (AS PER DSR-2019) Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and confoming to IS 780 of following sizes as required : - 150 mm dia.pipe

Supplying, fabricating and installing following size of perforated M.S. cable trays, including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M.S. suspenders and including paint - 100 mm width X 50 mm depth X 1.6 mm thickness

Supplying, fabricating and installing following size of perforated M.S. cable trays, including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M.S. suspenders and including paint - 375 mm width X 50 (23.23.6.3) mm depth X 1.6 mm thickness

Supplying and Earthing with GI earth plate 600mm x 600 mm x 6mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc, without coke and salt ) as required.

Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe confoming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. - 150 nominal bore (class C)

Supplying, fixing, testing and commissioning of Butterfly valves PN 16 rated without insulation for water circulation as per specifications 150mm dia.

Supplying, fixing, testing and commissioning of Butterfly valves PN 16 rated without insulation for water circulation as per specifications 100mm dia.

Supplying, fixing, testing and commissioning of Butterfly valves PN 16 rated without insulation for water circulation as per specifications 80mm dia.

Providing, installation, testing and commissioning of non-return valve of following sizes confiming to IS:5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : - 150 mm dia

Providing, installation, testing and commissioning of non-return valve of following sizes confiming to IS:5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : - 100 mm dia

Providing, installation, testing and commissioning of non-return valve of following sizes confiming to IS:5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : - 80 mm dia

Supplying of all materials and making teminations of 1.1 KV grade aluminium multicore cables of the following sizes. The work includes cable glanding using brass plated double compression glands, sizing the core leads, removing insulation, fixing suitable crimping type copper lugs/ thimbles by using hydraulic crimping tools with correct size of the dies, shaping the leads and neatly connecting the same to the equipment teminals. - 3.5 Core 120 sq. mm. Amoured Aluminium cable.

Supplying of all materials and making teminations of 1.1 KV grade aluminium multicore cables of the following sizes. The work includes cable glanding using brass plated double compression glands, sizing the core leads, removing insulation, fixing suitable crimping type copper lugs/ thimbles by using hydraulic crimping tools with correct size of the dies, shaping the leads and neatly connecting the same to the equipment teminals. - 5C x 1.5 Sq. mm

Providing and fixing carbon-di-oxide type fire extinguishers consisting of welded M.S. cylindrical body, internal discharge tube, discharge nozzle, suspension bracket, confoming to IS 15683, finished externally with red enamel paint and fixed to wall with brackets complete with internal charges. - Capacity 4.5 kg

Providing and fixing (ABC Dry Chemical Powder ) type Fire Extinguisher of Capacity 6 kg Confims to IS 15683, bearing ISI mark complete with brass forged squeeze grip type valve fitted with pressure gauge , pressurize with dry Nitrogen gas filled, with discharge nozzle with wall mounting bracket complete with internal charges. - Capacity 6 Kg.

Providing and fixing mechanical foam type Trolley Mounted Fire Extinguisher of bearing to IS:10568/IS13385/IS13386 with dis - Capacity 45 Lit.

Providing and fixing Carbon Dioxide Type Trolley Mounted Fire Extinguisher of as per IS: 2878 with discharge time of 10 to 20 sec/15 to 36sec/20 to 60sec respectively. - 22.5 Kg. CO2 Fire Extinguisher

Providing, fixing, testing & commissioning of resilient rubber lined single arch vibration eliminators suitable for raw water up to 45 deg. C temperature, working pressure 8.8 Kg/cm2 and test pressure 14 Kg/cm2 for :- - 150 mm dia

Providing, fixing, testing & commissioning of resilient rubber lined single arch vibration eliminators suitable for raw water up to 45 deg. C temperature, working pressure 8.8 Kg/cm2 and test pressure 14 Kg/cm2 for :- - 100 mm dia

Providing, fixing, testing & commissioning of resilient rubber lined single arch vibration eliminators suitable for raw water up to 45 deg. C temperature, working pressure 8.8 Kg/cm2 and test pressure 14 Kg/cm2 for :- - 80 mm dia

Providing and fixing of TAC approved 1.6mm thick M.S. fire hose cabinet (750x600x250mm) made out of 16 gauge M.S. sheet capable of accommodating landing valve, hose pipes, fittings & accessories. The box shall have a front glass door with lock and key arrangement & shall be painted with post office red colour (approval shall be taken on the basis of submitted sample before ordering) - for external and roof hydrant.

Supply, installation testing & commissioning Foot Valve lift type as per specifications to the satisfaction of Project-in-charge

Supplying, storing, handling, installation, testing & commissioning of water softening system having MSEP/FRP pressure vessel suitable for test pressure of 7 Kg/cm2 including dished end, ion- exchange resin, Frontal piping, C.I. diaphragm type valve, brine injection assembly for regeneration of softener, brine measuring cum salt water tank, inter connected flexible polypropylene MS Rubber lined (MSRL) piping, valves including provision of bye-pass arrangement complete with inside and outside painting etc. as required.Receiving, storing, handling and fixing of PVC/HDPE/FRP tank for Brine solution along with Hydraulic Injector with control valve and piping for brine injection. - Capacity : 2.5 LPS,Working Pressure : (5 ± 2.5)MWC

FIRE PUMPS 1620 lpm at 70 m Head. - AS PER SPECIFICATIONS AND OTHER ACCESSORIES

SITC Track mounted LED light, hight qualityy COB LED gives excellent quality of light distribution. Pressure Die-cast aluminium housing (heat sink)with powder coated White finish. • 355° swivel and 90° elbow tilt • Available in narrow and wide beam angles • No harmful UV & IR radiations • Environmental friendly • Operating voltage range-140 V - 270 V • Operating temperature: -10 °C to 45 °C • Average life L70B50: 50000 hours . System Power 35W, Beam Angle 23 degree, CCT 4000k, CRI>80, 3675 Lumens +/- 5%

SITC Track mounted LED light, hight qualityy COB LED gives excellent quality of light distribution. Pressure Die-cast aluminium housing (heat sink)with powder coated White finish. • 355° swivel and 90° elbow tilt • Available in narrow and wide beam angles • No harmful UV & IR radiations • Environmental friendly • Operating voltage range-140 V - 270 V • Operating temperature: -10 °C to 45 °C • Average life L70B50: 50000 hours . System Power 35W, Beam Angle 23 degree, CCT 4000k, CRI>80, 3675 Lumens +/- 5%

SITC Track mounted LED light, hight qualityy COB LED gives excellent quality of light distribution. Pressure Die-cast aluminium housing (heat sink)with powder coated White finish. • 355° swivel and 90° elbow tilt • Available in narrow and wide beam angles • No harmful UV & IR radiations • Environmental friendly • Operating voltage range-140 V - 270 V • Operating temperature: -10 °C to 45 °C • Average life L70B50: 50000 hours . System Power 35W, Beam Angle 23 degree, CCT 4000k, CRI>80, 3675 Lumens +/- 5%

SITC Track mounted LED light, hight qualityy COB LED gives excellent quality of light distribution. Pressure Die-cast aluminium housing (heat sink)with powder coated White finish. • 355° swivel and 90° elbow tilt • Available in narrow and wide beam angles • No harmful UV & IR radiations • Environmental friendly • Operating voltage range-140 V - 270 V • Operating temperature: -10 °C to 45 °C • Average life L70B50: 50000 hours . System Power 35W, Beam Angle 23 degree, CCT 4000k, CRI>80, 3675 Lumens +/- 5%

SITC Track mounted LED light, hight qualityy COB LED gives excellent quality of light distribution. Pressure Die-cast aluminium housing (heat sink)with powder coated White finish. • 355° swivel and 90° elbow tilt • Available in narrow and wide beam angles • No harmful UV & IR radiations • Environmental friendly • Operating voltage range-140 V - 270 V • Operating temperature: -10 °C to 45 °C • Average life L70B50: 50000 hours . System Power 35W, Beam Angle 23 degree, CCT 4000k, CRI>80, 3675 Lumens +/- 5%

SITC Track mounted LED light, hight qualityy COB LED gives excellent quality of light distribution. Pressure Die-cast aluminium housing (heat sink)with powder coated White finish. • 355° swivel and 90° elbow tilt • Available in narrow and wide beam angles • No harmful UV & IR radiations • Environmental friendly • Operating voltage range-140 V - 270 V • Operating temperature: -10 °C to 45 °C • Average life L70B50: 50000 hours . System Power 35W, Beam Angle 23 degree, CCT 4000k, CRI>80, 3675 Lumens +/- 5%

SITC Track mounted LED light, hight qualityy COB LED gives excellent quality of light distribution. Pressure Die-cast aluminium housing (heat sink)with powder coated White finish. • 355° swivel and 90° elbow tilt • Available in narrow and wide beam angles • No harmful UV & IR radiations • Environmental friendly • Operating voltage range-140 V - 270 V • Operating temperature: -10 °C to 45 °C • Average life L70B50: 50000 hours . System Power 35W, Beam Angle 23 degree, CCT 4000k, CRI>80, 3675 Lumens +/- 5%

SITC Track mounted LED light, hight qualityy COB LED gives excellent quality of light distribution. Pressure Die-cast aluminium housing (heat sink)with powder coated White finish. • 355° swivel and 90° elbow tilt • Available in narrow and wide beam angles • No harmful UV & IR radiations • Environmental friendly • Operating voltage range-140 V - 270 V • Operating temperature: -10 °C to 45 °C • Average life L70B50: 50000 hours . System Power 35W, Beam Angle 23 degree, CCT 4000k, CRI>80, 3675 Lumens +/- 5%

SITC Track mounted LED light, hight qualityy COB LED gives excellent quality of light distribution. Pressure Die-cast aluminium housing (heat sink)with powder coated White finish. • 355° swivel and 90° elbow tilt • Available in narrow and wide beam angles • No harmful UV & IR radiations • Environmental friendly • Operating voltage range-140 V - 270 V • Operating temperature: -10 °C to 45 °C • Average life L70B50: 50000 hours . System Power 35W, Beam Angle 23 degree, CCT 4000k, CRI>80, 3675 Lumens +/- 5%

SITC Track mounted LED light, hight qualityy COB LED gives excellent quality of light distribution. Pressure Die-cast aluminium housing (heat sink)with powder coated White finish. • 355° swivel and 90° elbow tilt • Available in narrow and wide beam angles • No harmful UV & IR radiations • Environmental friendly • Operating voltage range-140 V - 270 V • Operating temperature: -10 °C to 45 °C • Average life L70B50: 50000 hours . System Power 35W, Beam Angle 23 degree, CCT 4000k, CRI>80, 3675 Lumens +/- 5%

SITC Track mounted LED light, hight qualityy COB LED gives excellent quality of light distribution. Pressure Die-cast aluminium housing (heat sink)with powder coated White finish. • 355° swivel and 90° elbow tilt • Available in narrow and wide beam angles • No harmful UV & IR radiations • Environmental friendly • Operating voltage range-140 V - 270 V • Operating temperature: -10 °C to 45 °C • Average life L70B50: 50000 hours . System Power 35W, Beam Angle 23 degree, CCT 4000k, CRI>80, 3675 Lumens +/- 5%

SITC Track mounted LED light, hight qualityy COB LED gives excellent quality of light distribution. Pressure Die-cast aluminium housing (heat sink)with powder coated White finish. • 355° swivel and 90° elbow tilt • Available in narrow and wide beam angles • No harmful UV & IR radiations • Environmental friendly • Operating voltage range-140 V - 270 V • Operating temperature: -10 °C to 45 °C • Average life L70B50: 50000 hours . System Power 35W, Beam Angle 23 degree, CCT 4000k, CRI>80, 3675 Lumens +/- 5%

SITC Track mounted LED light, hight qualityy COB LED gives excellent quality of light distribution. Pressure Die-cast aluminium housing (heat sink)with powder coated White finish. • 355° swivel and 90° elbow tilt • Available in narrow and wide beam angles • No harmful UV & IR radiations • Environmental friendly • Operating voltage range-140 V - 270 V • Operating temperature: -10 °C to 45 °C • Average life L70B50: 50000 hours . System Power 35W, Beam Angle 23 degree, CCT 4000k, CRI>80, 3675 Lumens +/- 5%

SITC Track mounted LED light, hight qualityy COB LED gives excellent quality of light distribution. Pressure Die-cast aluminium housing (heat sink)with powder coated White finish. • 355° swivel and 90° elbow tilt • Available in narrow and wide beam angles • No harmful UV & IR radiations • Environmental friendly • Operating voltage range-140 V - 270 V • Operating temperature: -10 °C to 45 °C • Average life L70B50: 50000 hours . System Power 35W, Beam Angle 23 degree, CCT 4000k, CRI>80, 3675 Lumens +/- 5%

SITC Track mounted LED light, hight qualityy COB LED gives excellent quality of light distribution. Pressure Die-cast aluminium housing (heat sink)with powder coated White finish. • 355° swivel and 90° elbow tilt • Available in narrow and wide beam angles • No harmful UV & IR radiations • Environmental friendly • Operating voltage range-140 V - 270 V • Operating temperature: -10 °C to 45 °C • Average life L70B50: 50000 hours . System Power 35W, Beam Angle 23 degree, CCT 4000k, CRI>80, 3675 Lumens +/- 5%

SITC Track mounted LED light, hight qualityy COB LED gives excellent quality of light distribution. Pressure Die-cast aluminium housing (heat sink)with powder coated White finish. • 355° swivel and 90° elbow tilt • Available in narrow and wide beam angles • No harmful UV & IR radiations • Environmental friendly a • Operating voltage range-140 V - 270 V • Operating temperature: -10 °C to 45 °C • Average life L70B50: 50000 hours . System Power 35W, Beam Angle 23 degree, CCT 4000k, CRI>80, 3675 Lumens +/- 5%

SITC Track mounted LED light, hight qualityy COB LED gives excellent quality of light distribution. Pressure Die-cast aluminium housing (heat sink)with powder coated White finish. • 355° swivel and 90° elbow tilt • Available in narrow and wide beam angles • No harmful UV & IR radiations • Environmental friendly • Operating voltage range-140 V - 270 V • Operating temperature: -10 °C to 45 °C • Average life L70B50: 50000 hours . System Power 35W, Beam Angle 23 degree, CCT 4000k, CRI>80, 3675 Lumens +/- 5%

SITC Track mounted LED light, hight qualityy COB LED gives excellent quality of light distribution. Pressure Die-cast aluminium housing (heat sink)with powder coated White finish. • 355° swivel and 90° elbow tilt • Available in narrow and wide beam angles • No harmful UV & IR radiations • Environmental friendly • Operating voltage range-140 V - 270 V • Operating temperature: -10 °C to 45 °C • Average life L70B50: 50000 hours . System Power 35W, Beam Angle 23 degree, CCT 4000k, CRI>80, 3675 Lumens +/- 5%

SITC Track mounted LED light, hight qualityy COB LED gives excellent quality of light distribution. Pressure Die-cast aluminium housing (heat sink)with powder coated White finish. • 355° swivel and 90° elbow tilt • Available in narrow and wide beam angles • No harmful UV & IR radiations • Environmental friendly • Operating voltage range-140 V - 270 V • Operating temperature: -10 °C to 45 °C • Average life L70B50: 50000 hours . System Power 35W, Beam Angle 23 degree, CCT 4000k, CRI>80, 3675 Lumens +/- 5%

SITC Track mounted LED light, hight qualityy COB LED gives excellent quality of light distribution. Pressure Die-cast aluminium housing (heat sink)with powder coated White finish. • 355° swivel and 90° elbow tilt • Available in narrow and wide beam angles • No harmful UV & IR radiations • Environmental friendly • Operating voltage range-140 V - 270 V • Operating temperature: -10 °C to 45 °C • Average life L70B50: 50000 hours . System Power 35W, Beam Angle 23 degree, CCT 4000k, CRI>80, 3675 Lumens +/- 5%

SITC Track mounted LED light, hight qualityy COB LED gives excellent quality of light distribution. Pressure Die-cast aluminium housing (heat sink)with powder coated White finish. • 355° swivel and 90° elbow tilt • Available in narrow and wide beam angles • No harmful UV & IR radiations • Environmental friendly • Operating voltage range-140 V - 270 V • Operating temperature: -10 °C to 45 °C • Average life L70B50: 50000 hours . System Power 35W, Beam Angle 23 degree, CCT 4000k, CRI>80, 3675 Lumens +/- 5%

SITC Track mounted LED light, hight qualityy COB LED gives excellent quality of light distribution. Pressure Die-cast aluminium housing (heat sink)with powder coated White finish. • 355° swivel and 90° elbow tilt • Available in narrow and wide beam angles • No harmful UV & IR radiations • Environmental friendly • Operating voltage range-140 V - 270 V • Operating temperature: -10 °C to 45 °C • Average life L70B50: 50000 hours . System Power 35W, Beam Angle 23 degree, CCT 4000k, CRI>80, 3675 Lumens +/- 5%

SITC Track mounted LED light, hight qualityy COB LED gives excellent quality of light distribution. Pressure Die-cast aluminium housing (heat sink)with powder coated White finish. • 355° swivel and 90° elbow tilt • Available in narrow and wide beam angles • No harmful UV & IR radiations • Environmental friendly as it does not contain mercury • Operating voltage range-140 V - 270 V • Operating temperature: -10 °C to 45 °C • Average life L70B50: 50000 hours . System Power 35W, Beam Angle 23 degree, CCT 4000k, CRI>80, 3675 Lumens +/- 5%

SITC Track mounted LED light, hight qualityy COB LED gives excellent quality of light distribution. Pressure Die-cast aluminium housing (heat sink)with powder coated White finish. • 355° swivel and 90° elbow tilt • Available in narrow and wide beam angles • No harmful UV & IR radiations • Environmental friendly • Operating voltage range-140 V - 270 V • Operating temperature: -10 °C to 45 °C • Average life L70B50: 50000 hours . System Power 35W, Beam Angle 23 degree, CCT 4000k, CRI>80, 3675 Lumens +/- 5%

Indoor Lights 1 Meter 3 Phase Track

Preparation of subgrade by excavating earth to an average of 300 mm depth, dressing to camber and consolidating with 10 T capacity road roller compacting upto optimum moisture content including making good the undulation to receive the hard base and disposal of surplus earth as directed by Engineer-in-charge.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m All kinds of soil

Filling available excavated earth (excluding rock) in trenches, cum plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

Making 50 mm x 50 mm furrows, 45 degree to the centre line of the road and at one metre interval in the existing thin bituminous wearing coarse including sweeping and disposal of excavated material within 1000 metres lead as per technical clause 404 of MORT&H specifications 50mm deep furrow cutting

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 1 :4:8 (1 Cement : 4 coarse sand (zone-Ill) : 8 graded cum stone aggregate 40 mm nominal size)

RCC M-20, Using Batching Plant, Transit Mixer and Concrete Pump For solid slab super-etructure, 20-30 per cent of labour, material and machinery cost Height up to 5m

Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns

Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) sqm including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement Mortar 1:6 (1 cement: 6 coarse sand).

Providing and laying 18-20mm waterproof water - tight smooth cement finished plaster in cement mortar 1:4 (1cement: 4 coarse sand) and adding Accoproof or Cicco or other approved water-proofing agent as per manufacturer's specification , finished smooth in line,level and plumb including curing, scaffolding, hacking RCCsurfaces, raking joints etc. complete at all levels as directed and specified.

Providing and laying stone soling to WATERBOUND MACADAM AND HARDCORE in one layer with 90-63 mm sizes stone aggregate (2.7 cum /10 sqm) for 200 mm thick conslidated thickness including sorting, spreading to templates, packing with smaller stones, rolling, binding with moorum @ 0.09Cum /10 sqm, watering and consolidating with road roller of 8-10 tonnes capacity complete including supplying, spreading, and consolidating the binding material as directed (Consolidated thickness of WBM shall be measured and paid for.To achive the proctor density 95%.)

Providing and laying WATERBOUND MACADAM AND HARDCORE in single layer of 100 mm consolidated thickness with 63-40 mm sized stones aggregate (1.35 cum / 10 sqm for 100mm thick) including sorting, spreading to template, packing with smaller stones, rolling, binding with moorum, watering and consolidating with road roller of 8-10 T capacity including supplying, spreading and consolidating the binding material as directed ( Consolidated thickness shall be measured and paid for.To achive the proctor density 95%.)

Providing and laying of Flamed/Polished Granite Stone 16 to 18mm thk of approved colour shade & size in slabs/ bands/ strips, laid as per approved pattern laid on min 20mm thick cement mortar (1 cement : 4 coarse sand) and joined with cement slurry mixed with matching colour pigment, to match the shade of stone including cleaning, rubbing and double polishing, applying wax etc. all as per drawing.as a spill edge for water feature

Providing and laying of Dolomite stone 40mm thk Finish: shot blasted stone. Laid to pattern design ,max 3mm wide joint using matching grout bedded on 25mm thick mortar bed laid on concrete base

Providing and fixing of Slit drain 300mm wide at the entrance plaza

Providing and laying of Mint SandStone 40mm thk Finish: shot blasted stone Laid to pattern design ,max 3mm wide joint using matching grout bedded on 25mm thick mortar bed laid on concrete base. Basic Rate = Rs 990/- per sqm

Providing and laying of Kandla Grey Stone 40mm thk Finish: shot blasted stone of approved colour shade & size in slabs/ bands/ strips, laid as per approved pattern laid on min 20mm thick cement mortar (1 cement : 4 coarse sand) and joined with cement slurry mixed with matching colour pigment, to match the shade of Stone including cleaning, rubbing and double polishing, applying wax etc. all as per drawing. Rate to include coping for planters. Basic Rate = Rs 990/- per sqm

Providing and laying of Granite Stone 20mm thk Finish: polished Colour : as per designLaid to pattern design ,max 3mm wide joint using matching grout bedded on 25mm thick mortar bed laid on concrete base

Providing, fabrication and fixing of metal bow of tentative size 12800mm x 2400mm height in bronze as per design at the entrance plaza as per technical specifications.

Providing, fabrication and fixing of geyser jet with inbuilt light as per design at the entrance plaza

Providing and laying of Mint SandStone 40mm thk Finish of approved colour shade & size in slabs/ bands/ strips, laid as per approved pattern laid on min 20mm thick cement mortar (1 cement : 4 coarse sand) and joined with cement slurry mixed with matching colour pigment, to match the shade of Stone including cleaning, rubbing and double polishing, applying wax etc. all as per drawing. Rate to include coping for planters. Basic rate of mint sandstone Rs 990/- per sqm

Providing and laying of Brick work 450mm thick as portal wall as per design

Providing, fabrication and fixing of CNC cut feature in bronze of length 9.4m x height 3m as per design in front of administration block as per technical specifications.

Providing, fabrication and fixing of water screen of size 8.6m x 2.56m to be installed against the base of sanstone as per design as per technical specifications.

Providing and laying of shot blasted sandstone stone of approved colour shade & size in slabs/ bands/ strips, laid as per approved pattern laid on min 20mm thick cement mortar (1 cement : 4 coarse sand) and joined with cement slurry mixed with matching colour pigment, to match the shade of Stone including cleaning, rubbing and double polishing, applying wax etc. all as per drawing. Rate to include coping for planters. Basic rate of mint sandstone Rs 990/- per sqm

Providing, fabrication and fixing of Sitting bench of 2400mm length, 450mm depth and 450mm height made in SandStone 40mm thk Finish: polished as per design.

Providing, fabrication and fixing of Pergolas in I.P.E wood as per design as per technical specifications.

Providing, fabrication and fixing of MS Columns for pergolas as per design as per technical specifications.

Providing and laying of 20mm thk SandStone Finish of approved colour shade & size in slabs/ bands/ strips, laid as per approved pattern laid on min 20mm thick cement mortar (1 cement : 4 coarse sand) and joined with cement slurry mixed with matching colour pigment, to match the shade of Stone including cleaning, rubbing and double polishing, applying wax etc. all as per drawing. Rate to include coping for planters. Basic rate of mint sandstone Rs 990/- per sqm

Providing, fabrication and fixing of Sculptures with base of size 5' width x 5' depth x 4' height and 10' to 12' height sculpture made in marble with marble pedestal as per design intent. The same to have foundation structure as required.

Providing, fabrication and fixing of Sculptures with base of size 3' width x 3' depth x 4' height and scultpure 7' height as per design intent. The same to have foundation structure as required.

Providing, fabrication and fixing of Catch basins required for storm water drainage and landscape runoff water as per design intent

Providing and laying of shot blasted sandstone stone 20mm thk Finish of approved colour shade & size in slabs/ bands/ strips, laid as per approved pattern laid on min 20mm thick cement mortar (1 cement : 4 coarse sand) and joined with cement slurry mixed with matching colour pigment, to match the shade of Stone including cleaning, rubbing and double polishing, applying wax etc. all as per drawing. Rate to include coping for planters. Rs 990/- per sqm

Providing, fabrication and fixing of Sculptures in Stone with stone pedestal as per design intent

Providing and laying Cobble in yellow stone in paving of sizes 100x100x40mm. thick as per design / drawing of approved colour and size,laid over 20mm thick cement mortar bed 1:4 (1 cement : 4 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of stone including curing and finishing etc. and all incidentals complete.

Providing and laying of SandStone 20mm thk Finish: polished Laid as cladding & coping for planters

Providing and fixing of SandStone planters as per design intent

Providing and laying of Granite Stone 16mm to 18mm thk Finish: polished colored as per design of approved colour shade & size in slabs/ bands/ strips, laid as per approved pattern laid on min 20mm thick cement mortar (1 cement : 4 coarse sand) and joined with cement slurry mixed with matching colour pigment, to match the shade of Stone including cleaning, rubbing and double polishing, applying wax etc. all as per drawing as a backdrop to the feature portal wall

Providing and laying of Sandstone stone 35mm to 40mm thk Finish: shot blasted stone using matching grout of approved colour shade & size in slabs/ bands/ strips, laid as per approved pattern laid on min 20mm thick cement mortar (1 cement : 4 coarse sand) and joined with cement slurry mixed with matching colour pigment, to match the shade of Stone including cleaning, rubbing and double polishing, applying wax etc. all as per drawing.

Providing and laying of Kota stone 40mm thk Finish: shot blasted stone. Laid to pattern design for the Fire tender path ,max 3mm wide joint using matching grout bedded on 25mm thick mortar bed laid on concrete base

Procuremnt and planting of shrubs named DRACAENA MAHATMA of height not less than 8ft. All plantations like Trees, shrubs ground cover, etc. to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Supplying and stacking of good quality top layer garden earth free from debris and weeds, at site including royalty and carriage/lead 5 km (good earth measured in stacks will be reduced by 20 % for payment) only for filling of pots and flower beds

Procuremnt and planting of shrubs named ADENIUM of height not less than 8ft. All plantations like Trees, shrubs ground cover, etc. to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of shrubs named FICUS PANDA of height not less than 8ft. All plantations like Trees, shrubs ground cover, etc. to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of groundcover named SYNGONIUM of height not less than 8ft. All plantations like Trees, shrubs ground cover, etc. to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of groundcover named WEDELIA TRILOBATA of height not less than 8ft. All plantations like Trees, shrubs ground cover, etc. to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of trees named AZADIRACHTA INDICA of height not less than 8ft. Trees to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of trees named DELONIX REGIA of height not less than 8ft. Trees to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of shrubs named FICUS BENJAMINA of height not less than 8ft All plantations like Trees, shrubs ground cover, etc. to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of trees named PLUMERIA ALBA of height not less than 8ft. Trees to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of shrubs named TECOMA STANS of height not less than 8ft. All plantations like Trees, shrubs ground cover, etc. to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt, supply and planting of lawn with BURMUDA 419 grass lawn turf All plantations like Trees, shrubs ground cover, etc. to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of groundcover named ASPARAGUS MEYERI of height not less than 8ft. All plantations like Trees, shrubs ground cover, etc. to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of trees named CASSIA FISTULA of height not less than 8ft. Trees to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of trees named CHORISIA SPECIOSA of height not less than 8ft. Trees to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of trees named MAGNOLIA GRANDIFLORA of height not less than 8ft. Trees to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of shrubs named HAMELIA PATENS of height not less than 8ft. All plantations like Trees, shrubs ground cover, etc. to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of trees named NEOLAMARCKIA CADAMBA Trees to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of trees named CALLISTEMON CITRINUS. Trees to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of trees named PALM ROYSTONEA REGIA. Trees to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of trees named PALM CYCAS REVOLUTA Trees to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of topiary named FICUS NITIDA. All plantations like Trees, shrubs ground cover, etc. to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of shrubs named CANNA LILY RED. All plantations like Trees, shrubs ground cover, etc. to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of shrubs named IXORA COCCINEA All plantations like Trees, shrubs ground cover, etc. to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of groundcover named PENNISETUM WHITE. All plantations like Trees, shrubs ground cover, etc. to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of groundcover named RUSSELIA JUNCEA All plantations like Trees, shrubs ground cover, etc. to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of groundcover named AGLAONEMA RED. All plantations like Trees, shrubs ground cover, etc. to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of bamboo trees named RINGAL BAMBOO. All plantations like Trees, shrubs ground cover, etc. to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of climbers named QUISQUALIS INDICA. All plantations like Trees, shrubs ground cover, etc. to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of climbers named THUNBERGIA GRANDIFLORA. All plantations like Trees, shrubs ground cover, etc. to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of climbers named JASMINIUM AURICUALATUM All plantations like Trees, shrubs ground cover, etc. to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procurment and filling and preparation of ground with planting medium, cultivia compost for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of trees named TABEBUIA ARGENTEA of height not less than 8ft. Trees to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt and planting of trees named BAUHINIA BLAKEANA of height not less than 8ft. Trees to be planted in prepared ground as detailed: including all Cultivia compost and fertilisers, tree stakes, tree ties, temporary planting screens mulch and the like, as per specifications and drawings for the plantations including trees, ground cover, shrubs, etc.

Procuremnt, supply and planting of Terram root barrier side of plant pits.

Central Control Station for BMS System - as per specs

600 dpi or better A4 size Lazer Printer for printing reports ,Alams data etc - as per specs

Supply, installation, testing and commissioning of SOFTWARES / SERVER / ROUTER for BMS System - Client Licenses for 5 Client Operator Work Stations

Supply, Installation, Testing & Commissioning of Integrators for Software Integration of absorption chillers (VAM) system

Supply, Installation, Testing & Commissioning of Integrators for chilled water pumps VFDs

Supply, Installation, Testing & Commissioning of Integrators for Condenser water pumps

Supply, Installation, Testing & Commissioning of Integrators for Cooling Towers

Supply, Installation, Testing & Commissioning of Integrators for TFA/AHU with Variable Frequency Drive (VFD)

Supply, Installation, Testing & Commissioning of Integrators for Ultraviolet germicidal irradiation (UVGI)

Supply, Installation, Testing & Commissioning of Integrators for Plate type heat exchanger (PHE)

Supply, Installation, Testing & Commissioning of Integrators for Diesel Generator (DG)

Supply, Installation, Testing & Commissioning of Integrators for HT/LT Panel

Supply, Installation, Testing & Commissioning of Integrators for Escalotor/ Lift

Supply, Installation, Testing & Commissioning of Integrators for Solar System

Direct Digital Controller (DDC) Controllers & Enclosures Chiller Plant Manager (CPM) For VAM /Chiller, Primary Pump with VFD features like Chiller sequencing, run time equalization, auto skip function, touch Screen colour Display etc (If Any HVAC Boq Considered then that BMS Compitable)

DDC CONTROLLERS - DDC for Condenser Water Pumps

DDC CONTROLLERS - DDC for Cooling Tower

DDC CONTROLLERS - DDC for Hot water Generator

DDC CONTROLLERS - DDC for Floor Mounted Air Handling Units

DDC CONTROLLERS - DDC for Central Air Cleaner and UVGI System

DDC CONTROLLERS - DDC for Fan Coil Units/HCU

DDC CONTROLLERS - DDC for exhaust fan

DDC CONTROLLERS - DDC for DG System

DDC CONTROLLERS - DDC for HT/LT Panel

DDC CONTROLLERS - DDC for Lift System

DDC CONTROLLERS - DDC for PHE System

Field Devices Supply, installation, testing & commissioning of the following Sensors with reqd. complete accessories for complete system : (Spcl. Note If any item considered in above or HVAC BOQ then that’s not repeated here) - Water Flow Switch

Field Devices Supply, installation, testing & commissioning of the following Sensors with reqd. complete accessories for complete system : (Spcl. Note If any item considered in above or HVAC BOQ then that’s not repeated here) - Flow Sensor/m

Field Devices Supply, installation, testing & commissioning of the following Sensors with reqd. complete accessories for complete system : (Spcl. Note If any item considered in above or HVAC BOQ then that’s not repeated here) - Diff. Pressure Sensors

Field Devices Supply, installation, testing & commissioning of the following Sensors with reqd. complete accessories for complete system : (Spcl. Note If any item considered in above or HVAC BOQ then that’s not repeated here) - Water Level Switch

Field Devices Supply, installation, testing & commissioning of the following Sensors with reqd. complete accessories for complete system : (Spcl. Note If any item considered in above or HVAC BOQ then that’s not repeated here) - Immersion Temp Sensor

Field Devices Supply, installation, testing & commissioning of the following Sensors with reqd. complete accessories for complete system : (Spcl. Note If any item considered in above or HVAC BOQ then that’s not repeated here) - Duct Temp. & Humidity Sensors

Field Devices Supply, installation, testing & commissioning of the following Sensors with reqd. complete accessories for complete system : (Spcl. Note If any item considered in above or HVAC BOQ then that’s not repeated here) - Room Temp & RH Sensor

Field Devices Supply, installation, testing & commissioning of the following Sensors with reqd. complete accessories for complete system : (Spcl. Note If any item considered in above or HVAC BOQ then that’s not repeated here) - Air DP Switch

Field Devices Supply, installation, testing & commissioning of the following Sensors with reqd. complete accessories for complete system : (Spcl. Note If any item considered in above or HVAC BOQ then that’s not repeated here) - Water Pressure Gauge

Supply, Installation, Testing & Commissioning of the following cables conduit and cable tray as per the specifications: - 2C Twisted Pair x 1.5 Sqmm Communication Cable-Flexible

Supply, Installation, Testing & Commissioning of the following cables conduit and cable tray as per the specifications: - 2C x 1.5 Sq mm unscreened Flexible Cable

Supply, Installation, Testing & Commissioning of the following cables conduit and cable tray as per the specifications: - 4C x 1.5 Sq mm Screened Flexible Cable

Supply, Installation, Testing & Commissioning of the following cables conduit and cable tray as per the specifications: - 6C x 1.5 Sq mm Screened Flexible Cable

Supply, Installation, Testing & Commissioning of the following cables conduit and cable tray as per the specifications: - 8C x 1.5 Sq mm unscreened Flexible Cable

Supply, Installation, Testing & Commissioning of the following cables conduit and cable tray as per the specifications: - 25 mm PVC Conduit for above Cables

Supply, Installation, Testing & Commissioning of the following cables conduit and cable tray as per the specifications: - 200 mm x 50 mm x 2 mm Aluminimum Trunck

Supply, Installation, Testing & Commissioning of the following cables conduit and cable tray as per the specifications: - 100 mm x 20 mm x 2 mm Perforated Cable Tray

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.

Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.

Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required

Electronic, self-balancing, pressure independent type dynamic balancing valve with integrated 2 way modualating control valves in a single body, alongwith actuator as specified 65 mm

Electronic, self-balancing, pressure independent type dynamic balancing valve with integrated 2 way modualating control valves in a single body, alongwith actuator as specified 50 mm

Electronic, self-balancing, pressure independent type dynamic balancing valve with integrated 2 way modualating control valves in a single body, alongwith actuator as specified 40 mm

Electronic, self-balancing, pressure independent type dynamic balancing valve with integrated 2 way modualating control valves in a single body, alongwith actuator as specified 32 mm

Electronic, self-balancing, pressure independent type dynamic balancing valve with integrated 2 way modualating control valves in a single body, alongwith actuator as specified 25 mm

Supplying, fixing, testing and commissioning of condenser water pipes of following sizes of MS 'C' class along with necessary clamps, vibration isolators and fittings such as bends,tees etc.but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. Note:-The Pipes size 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. And from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. 250 mm

Supplying, fixing, testing and commissioning of condenser water pipes of following sizes of MS 'C' class along with necessary clamps, vibration isolators and fittings such as bends,tees etc.but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. Note:-The Pipes size 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. And from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. 200 mm

Supplying, fixing, testing and commissioning of condenser water pipes of following sizes of MS 'C' class along with necessary clamps, vibration isolators and fittings such as bends,tees etc.but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. Note:-The Pipes size 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. And from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. 150 mm

Supplying, fixing, testing and commissioning of condenser water pipes of following sizes of MS 'C' class along with necessary clamps, vibration isolators and fittings such as bends,tees etc.but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. Note:-The Pipes size 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. And from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. 125 mm

Supplying, fixing, testing and commissioning of condenser water pipes of following sizes of MS 'C' class along with necessary clamps, vibration isolators and fittings such as bends,tees etc.but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. Note:-The Pipes size 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. And from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. 100 mm

Supplying, fixing,testing and commissioning of BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. - 200mm dia

Supplying, fixing,testing and commissioning of BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. - 150mm dia

Supplying, fixing,testing and commissioning of BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. - 125mm dia

Supplying, fixing,testing and commissioning of BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. - 100mm dia

Supplying, fixing,testing and commissioning of BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. - 80mm dia

Supplying, fixing,testing and commissioning of BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. - 65mm dia

Supplying, fixing,testing and commissioning of BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. - 50mm dia

Supplying, fixing,testing and commissioning of BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. - 40mm dia

Supplying, fixing,testing and commissioning of NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified. - 200mm dia

Supplying, fixing,testing and commissioning of NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified. - 150mm dia

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Thickness 0.63 mm sheet

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Thickness 0.80 mm sheet

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Thickness 1.00 mm sheet

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Thickness 1.25 mm sheet

Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Thickness 0.63 mm sheet

Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Thickness 0.80 mm sheet

Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Thickness 1.00 mm sheet

Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Thickness 1.25 mm sheet

Supply, installation, testing & commissioning of thermal insulated flexible duct of following sizes duly supported at regular interval as per site requirement etc. complete as required as per specifications. - 200 mm Dia.

Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date ) at joints repairing of damage to building etc. as per specifications and as required complete in all respect. Note:- The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. 65mm dia.(50mm thick insulation)

Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date ) at joints repairing of damage to building etc. as per specifications and as required complete in all respect. Note:- The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. 250mm dia.(75 mm thick insulation)

Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date ) at joints repairing of damage to building etc. as per specifications and as required complete in all respect. Note:- The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. 200mm dia (75 mm thick insulation)

Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date ) at joints repairing of damage to building etc. as per specifications and as required complete in all respect. Note:- The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. 150mm dia (75 mm thick insulation)

Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date ) at joints repairing of damage to building etc. as per specifications and as required complete in all respect. Note:- The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. 125mm dia (75 mm thick insulation)

Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date ) at joints repairing of damage to building etc. as per specifications and as required complete in all respect. Note:- The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. 100mm dia (75 mm thick insulation)

Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date ) at joints repairing of damage to building etc. as per specifications and as required complete in all respect. Note:- The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. 80mm dia (75 mm thick insulation)

Supplying, fixing,testing and commissioning of BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified. - 150mm

Supplying, fixing,testing and commissioning of BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified. - 125mm

Supplying, fixing,testing and commissioning of BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified. - 100mm

Supplying, fixing,testing and commissioning of BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified. - 80mm

Supplying, fixing,testing and commissioning of BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified. - 65mm

Supplying, fixing,testing and commissioning of BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified. - 50mm

Supplying, fixing,testing and commissioning of BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified. - 40mm

Supplying, fixing,testing and commissioning of BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified. - 200mm dia

Supplying, fixing,testing and commissioning of BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified. - 150mm dia

Supplying, fixing,testing and commissioning of BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified. - 125mm dia

Supplying, fixing,testing and commissioning of BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified. - 100 mm dia

Supplying, fixing,testing and commissioning of BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified. - 80mm dia

Supplying, fixing,testing and commissioning of BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified. - 65mm dia

Supplying, fixing,testing and commissioning of NON RETURN VALVE with dual plate of CI body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating for chilled / hot water circulation including insulation as specified.- 200 mm dia

Supplying, fixing,testing and commissioning of NON RETURN VALVE with dual plate of CI body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating for chilled / hot water circulation including insulation as specified.- 150 mm dia

Supplying, fixing,testing and commissioning of NON RETURN VALVE with dual plate of CI body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating for chilled / hot water circulation including insulation as specified. - 125 mm dia

Supplying, fixing,testing and commissioning of Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation including insulation as specified. - 150mm dia

Supplying, fixing,testing and commissioning of Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation including insulation as specified.- 125mm dia

Supplying, fixing,testing and commissioning of Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation including insulation as specified. - 100mm dia

Supplying, fixing,testing and commissioning of Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation including insulation as specified.- 80mm dia

Supplying, fixing,testing and commissioning of Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation including insulation as specified.- 65mm dia

Supplying, fixing,testing and commissioning of Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation including insulation as specified.. - 50mm dia

Supplying, fixing,testing and commissioning of Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation including insulation as specified.- 40mm dia

Supplying,Laying/ fixing ,testing and commissioning of following nominal sizes of chilled water piping inside the building (With Necessry clamps, vibration isolators, and Threaded fittings but excluding valves, stariners, gauge etc.)duly insulated with following closed cell elastometric nitrile rubber of min. 45Kg/m3 density, themal conductivity 0.034 w/mk or better at 20 deg mean temp. class O insulation applied by suitable adhesive complete including reparing of damage to building etc. as per spec. and as required complete in all respect. - 32 mm dia (19 mm thick insulation)

Supplying, Laying/ fixing ,testing and commissioning of following nominal sizes of chilled water piping inside the building (With Necessry clamps, vibration isolators, and Threaded fittings but excluding valves, stariners, gauge etc.)duly insulated with following closed cell elastometric nitrile rubber of min. 45Kg/m3 density, themal conductivity 0.034 w/mk or better at 20 deg mean temp. class O insulation applied by suitable adhesive complete including reparing of damage to building etc. as per spec. and as required complete in all respect. - 25mm dia (19 mm thick insulation)

SITC of HOT WATER BASED/GAS/HSD VAPOUR ABSORPTION WATER CHILLING MACHINE DOUBLE EFFECT (VAM) WITH HEATING & COOLING Spcl. Note: the equipment shall be as per the technical specifications attached and before Dispatch from Factory One Machine shall be reqd.

SITC of PUMP sets : CONDENSER WATER PUMPS (With VFD's) Spcl. Note: the equipment shall be as per the technical specifications attached and before Dispatch from Factory One Machine shall be reqd.

SITC of PRIMARY CHILLED/HOT WATER PUMPS (With VFD's) Spcl. Note: the equipment shall be as per the technical specifications attached and before Dispatch from Factory One Machine shall be reqd.

SITC of COOLING TOWERS CTI Certified Spcl. Note: the equipment shall be as per the technical specifications attached and before Dispatch from Factory One Machine shall be reqd.

SITC of Room De-humidifier to remove humidity Spcl. Note: the equipment shall be as per the technical specifications attached and before Dispatch from Factory One Machine shall be reqd.

SITC of MS CHIMNEY Spcl. Note: the equipment shall be as per the technical specifications attached and before Dispatch from Factory One Machine shall be reqd.

SITC of Diesel day oil tank

SITC of PUMP sets : CONDENSER WATER PUMPS (With VFD's) Spcl. Note: the equipment shall be as per the technical specifications attached and before Dispatch from Factory One Machine shall be reqd.

SITC of PRIMARY CHILLED/HOT WATER PUMPS (With VFD's) Spcl. Note: the equipment shall be as per the technical specifications attached and before Dispatch from Factory One Machine shall be reqd.

SITC of COOLING TOWERS CTI Certified Spcl. Note: the equipment shall be as per the technical specifications attached and before Dispatch from Factory One Machine shall be reqd.

SITC of Plant System Manager Spcl. Note: the equipment shall be as per the technical specifications attached and before Dispatch from Factory One Machine shall be reqd.

SITC of Smart Energy Monitoring and Anti Fouling Condenser System Spcl. Note: the equipment shall be as per the technical specifications attached and before Dispatch from Factory One Machine shall be reqd.

SITC of AIR HANDLERS (Treated Fresh Air Unit - TFA) (With One Coil System) Double Skin Floor Mounted Horizontal/Vertical TFA With themal break profile ,one inch nano wave lofted synthatic media Filter ESP/EAC & Fine filter. The dust holding capacity of PM 10 shall be 190 grams and 150 grams for the 0.3 Micron .Two Pipe System (One Coils) ; 8-RD Chilled water Coil , 80 mmwg S.P. with three Phase Motor - 3000 CFM/15.0 TR for Block-A as per technical specifications.

SITC of Double Skin Floor Mounted Horizontal/Vertical TFA With themal break profile ,one inch nano wave lofted synthatic media Filter ESP/EAC & Fine filter. The dust holding capacity of PM 10 shall be 190 grams and 150 grams for the 0.3 Micron .Two Pipe System (One Coils) ; 8-RD Chilled water Coil , 80 mmwg S.P. with three Phase Motor - 3500 CFM/18.0 TR for Block-B,C

SITC of Double Skin Floor Mounted Horizontal/Vertical TFA With themal break profile ,one inch nano wave lofted synthatic media Filter ESP/EAC & Fine filter. The dust holding capacity of PM 10 shall be 190 grams and 150 grams for the 0.3 Micron .Two Pipe System (One Coils) ; 8-RD Chilled water Coil , 80 mmwg S.P. with three Phase Motor - 2500 CFM/13.0 TR for Block-D,F

SITC of Double Skin Floor Mounted Horizontal/Vertical TFA With themal break profile ,one inch nano wave lofted synthatic media Filter ESP/EAC & Fine filter. The dust holding capacity of PM 10 shall be 190 grams and 150 grams for the 0.3 Micron .Two Pipe System (One Coils) ; 8-RD Chilled water Coil , 80 mmwg S.P. with three Phase Motor - 2000 CFM/10.0 TR for Exihibition Hall

SITC of Double Skin Floor Mounted Horizontal/Vertical TFA With themal break profile ,one inch nano wave lofted synthatic media Filter ESP/EAC & Fine filter. The dust holding capacity of PM 10 shall be 190 grams and 150 grams for the 0.3 Micron .Two Pipe System (One Coils) ; 8-RD Chilled water Coil , 80 mmwg S.P. with three Phase Motor - 4500 CFM/23.0 TR for Exihibition Hall

SITC of AIR HANDLERS (TFA) (With two Coil System) Double Skin Floor Mounted Horizontal/Vertical TFA With themal break profile ,one inch nano wave lofted synthatic media Filter ESP/EAC & Fine filter. The dust holding capacity of PM 10 shall be 190 grams and 150 grams for the 0.3 Micron .Two Pipe System (two Coils) ; 4RD & 8-RD Chilled water Coil , 80 mmwg S.P. with three Phase Motor - 3000 CFM/15.0 TR for Block-A

SITC of Double Skin Floor Mounted Horizontal/Vertical TFA With themal break profile ,one inch nano wave lofted synthatic media Filter ESP/EAC & Fine filter. The dust holding capacity of PM 10 shall be 190 grams and 150 grams for the 0.3 Micron .Two Pipe System (two Coils) ; 4RD & 8-RD Chilled water Coil , 80 mmwg S.P. with three Phase Motor - 3500 CFM/18.0 TR for Block-B,C

SITC of Double Skin Floor Mounted Horizontal/Vertical TFA With themal break profile ,one inch nano wave lofted synthatic media Filter ESP/EAC & Fine filter. The dust holding capacity of PM 10 shall be 190 grams and 150 grams for the 0.3 Micron .Two Pipe System (two Coils) ; 4RD & 8-RD Chilled water Coil , 80 mmwg S.P. with three Phase Motor - 2500 CFM/13.0 TR for Block-D,F

SITC of Double Skin Floor Mounted Horizontal/Vertical TFA With themal break profile ,one inch nano wave lofted synthatic media Filter ESP/EAC & Fine filter. The dust holding capacity of PM 10 shall be 190 grams and 150 grams for the 0.3 Micron .Two Pipe System (two Coils) ; 4RD & 8-RD Chilled water Coil , 80 mmwg S.P. with three Phase Motor - 2000 CFM/10.0 TR for Exihibition Hall

SITC of Double Skin Floor Mounted Horizontal/Vertical TFA With themal break profile ,one inch nano wave lofted synthatic media Filter ESP/EAC & Fine filter. The dust holding capacity of PM 10 shall be 190 grams and 150 grams for the 0.3 Micron .Two Pipe System (two Coils) ; 4RD & 8-RD Chilled water Coil , 80 mmwg S.P. with three Phase Motor - 4500 CFM/23.0 TR for Exihibition Hall

SITC of Double Skin Floor Mounted Horizontal/Vertical TFA With themal break profile ,one inch nano wave lofted synthatic media Filter ESP/EAC & Fine filter. The dust holding capacity of PM 10 shall be 190 grams and 150 grams for the 0.3 Micron .Two Pipe System (One Coils) ; 8-RD Chilled water Coil , 80 mmwg S.P. of Supply Air Fan and 60 mm wg SP of Exh. fan,Enthalpy Recovery Wheel , ,Mixing box and with three Phase Motor - 3500 CFM Supply Fan/3500 CFM Exh. Fan/11.0 TR for TFA

SITC of Fan Coil units complete with all valves and accessories as described above. - 1.5 TR nominal capacity ( 600 CFM)

SITC of Fan Coil units complete with all valves and accessories as described above. - 2.0 TR nominal capacity ( 800 CFM)

HYDRONIC CASSETTE UNITS (HCU) SITC of HCU shall have a one inch nano wave lofted synthatic media (Nano fiber media,Its protection against PM 2.5,pollen and allergens IPD: not more than 5 mm. , Efficiency:≥80%, Easy cleaning and Life five years) Filter. - 1.0 TR nominal capacity ( 400 CFM)

SITC of HCU shall have a one inch nano wave lofted synthatic media (Nano fiber media,Its protection against PM 2.5,pollen and allergens IPD: not more than 5 mm. , Efficiency:≥80%, Easy cleaning and Life five years) Filter. - 2.0 TR nominal capacity ( 800 CFM)

SITC of Propeller fan Spcl. Note: the equipment shall be as per the technical specifications attached and before Dispatch from Factory One Machine shall be reqd. - 150 mm dia propeller fan, with single phase motor

SITC of Propeller fan Spcl. Note: the equipment shall be as per the technical specifications attached and before Dispatch from Factory One Machine shall be reqd. - 300 mm dia propeller fan, with single phase motor

SITC of Inline fan Spcl. Note: the equipment shall be as per the technical specifications attached and before Dispatch from Factory One Machine shall be reqd. - 50-300 CFM, 5-7 mm SP WG with Single phase motor

SITC of Inline fan Spcl. Note: the equipment shall be as per the technical specifications attached and before Dispatch from Factory One Machine shall be reqd. - 350-500 CFM, 7-10 mm SP WG with Single phase motor

SITC of Inline fan Spcl. Note: the equipment shall be as per the technical specifications attached and before Dispatch from Factory One Machine shall be reqd. - 550-800 CFM, 10-12 mm SP WG with Single phase motor

SITC of Tube Axial Flow fans SITC of Long case Tube axial flow fans, as per specifications and approved makes suitable for three phase operation at 1450 RPM respectively Nomal/Smoke case. - 22500 CFM , 30 mmwg SP (For Make Up air)

SITC of AMCA Certified (For Air and Sound Perfomance) tube axial flow fan of different capacity as mentioned below in standard M.S.contruction. Entire fan model & AMCA Seal shall apear in techncial submittal of fan. All the fans are synthetic enamelled panited/hot dip galvanized with minimum 220 GSM Zinc Coating and complete with bird screen at inlet. The electric motor coupler shall be squirrel cage induction motor (IE-3 type) confiming to IS - 325-IP - 55 with class `H' insulation. Motor shall be of high temperature resistance "Class H Smoke Spill" 250° C for 2 hrs. Fan shall be EN 12101-3 Certified & CE/UL Listed for high temprature. Fan efficiency should not be less than 70 %, noise level should not be more than 80 db @ 3 m distance when measured in hemisperical reverberant room conditions for Nomal mode Fans and noise level should not be more than 85 db @ 3 m distance when measured in hemisperical reverberant room conditions for Emergency mode Fans. Fans should be as per specification and drawings (As per Vent. Fan Schedule ). - 22500-23500 CFM, 30 mmwg SP For Nomal & Smoke extract

SITC of AMCA Certified (For Air and Sound Perfomance) tube axial flow fan of different capacity as mentioned below in standard M.S.contruction. Entire fan model & AMCA Seal shall apear in techncial submittal of fan. All the fans are synthetic enamelled panited/hot dip galvanized with minimum 220 GSM Zinc Coating and complete with bird screen at inlet. The electric motor coupler shall be squirrel cage induction motor (IE-3 type) confiming to IS - 325-IP - 55 with class `H' insulation. Motor shall be of high temperature resistance "Class H Smoke Spill" 250° C for 2 hrs. Fan shall be EN 12101-3 Certified & CE/UL Listed for high temprature. Fan efficiency should not be less than 70 %, noise level should not be more than 80 db @ 3 m distance when measured in hemisperical reverberant room conditions for Nomal mode Fans and noise level should not be more than 85 db @ 3 m distance when measured in hemisperical reverberant room conditions for Emergency mode Fans. Fans should be as per specification and drawings (As per Vent. Fan Schedule ). - 6500-7500 CFM, 30 mmwg SP For Nomal & Smoke extract, With Suitable VFD

SITC of AMCA Certified (For Air and Sound Perfomance) tube axial flow fan of different capacity as mentioned below in standard M.S.contruction. Entire fan model & AMCA Seal shall apear in techncial submittal of fan. All the fans are synthetic enamelled panited/hot dip galvanized with minimum 220 GSM Zinc Coating and complete with bird screen at inlet. The electric motor coupler shall be squirrel cage induction motor (IE-3 type) confiming to IS - 325-IP - 55 with class `H' insulation. Motor shall be of high temperature resistance "Class H Smoke Spill" 250° C for 2 hrs. Fan shall be EN 12101-3 Certified & CE/UL Listed for high temprature. Fan efficiency should not be less than 70 %, noise level should not be more than 80 db @ 3 m distance when measured in hemisperical reverberant room conditions for Nomal mode Fans and noise level should not be more than 85 db @ 3 m distance when measured in hemisperical reverberant room conditions for Emergency mode Fans. Fans should be as per specification and drawings (As per Vent. Fan Schedule ). - 13500 CFM, 30 mmwg SP For Nomal & Smoke extract With Suitable VFD

SITC of CO2 SENSOR Spcl. Note: the equipment shall be as per the technical specifications attached and before Dispatch from Factory One Machine shall be reqd.

SITC of Variable speed drives. Spcl. Note: the equipment shall be as per the technical specifications attached and before Dispatch from Factory One Machine shall be reqd.

SITC of Air Purifier (UVGI System) Spcl. Note: the equipment shall be as per the technical specifications attached and before Dispatch from Factory One Machine shall be reqd. - Up to 4000 CFM, 17 Watt

SITC of Air Purifier (UVGI System) Spcl. Note: the equipment shall be as per the technical specifications attached and before Dispatch from Factory One Machine shall be reqd. - 4500 to 10000 CFM, 36 Watt

SITC of AIR CURTAIN Supply,installation testing and commissioning of AIR CURTAIN of following size as per approved make and with Door limit switch/sensor with multi speed regulator .(At ground entrance) - 1800 mm long (High flow type)

SITC of EXPANSION TANK 1000 Ltr . Open Expansion Tank duly insulated and with all accessories.

SITC of CHILLED WATER PIPING (Including Nitrile Rubber Insulation) 'Supplying,Laying/ fixing ,testing and commissioning of following nominal sizes of chilled water piping inside the building (With Necessry clamps, vibration isolators, and Threaded fittings but excluding valves, stariners, gauge etc.)duly insulated with following closed cell elastometric nitrile rubber of min. 45Kg/m3 density, themal conductivity 0.034 w/mk or better at 20 deg mean temp. class O insulation applied by suitable adhesive complete including reparing of damage to building etc. as per spec. and as required complete in all respect. - 250mm dia (25mm thick insulation)

SITC of CHILLED WATER PIPING (Including Nitrile Rubber Insulation) 'Supplying,Laying/ fixing ,testing and commissioning of following nominal sizes of chilled water piping inside the building (With Necessry clamps, vibration isolators, and Threaded fittings but excluding valves, stariners, gauge etc.)duly insulated with following closed cell elastometric nitrile rubber of min. 45Kg/m3 density, themal conductivity 0.034 w/mk or better at 20 deg mean temp. class O insulation applied by suitable adhesive complete including reparing of damage to building etc. as per spec. and as required complete in all respect. - 200mm dia (25mm thick insulation)

SITC of CHILLED WATER PIPING (Including Nitrile Rubber Insulation) 'Supplying,Laying/ fixing ,testing and commissioning of following nominal sizes of chilled water piping inside the building (With Necessry clamps, vibration isolators, and Threaded fittings but excluding valves, stariners, gauge etc.)duly insulated with following closed cell elastometric nitrile rubber of min. 45Kg/m3 density, themal conductivity 0.034 w/mk or better at 20 deg mean temp. class O insulation applied by suitable adhesive complete including reparing of damage to building etc. as per spec. and as required complete in all respect. - 150mm dia (25mm thick insulation)

SITC of CHILLED WATER PIPING (Including Nitrile Rubber Insulation) 'Supplying,Laying/ fixing ,testing and commissioning of following nominal sizes of chilled water piping inside the building (With Necessry clamps, vibration isolators, and Threaded fittings but excluding valves, stariners, gauge etc.)duly insulated with following closed cell elastometric nitrile rubber of min. 45Kg/m3 density, themal conductivity 0.034 w/mk or better at 20 deg mean temp. class O insulation applied by suitable adhesive complete including reparing of damage to building etc. as per spec. and as required complete in all respect. - 125mm dia (25mm thick insulation)

SITC of CHILLED WATER PIPING (Including Nitrile Rubber Insulation) 'Supplying,Laying/ fixing ,testing and commissioning of following nominal sizes of chilled water piping inside the building (With Necessry clamps, vibration isolators, and Threaded fittings but excluding valves, stariners, gauge etc.)duly insulated with following closed cell elastometric nitrile rubber of min. 45Kg/m3 density, themal conductivity 0.034 w/mk or better at 20 deg mean temp. class O insulation applied by suitable adhesive complete including reparing of damage to building etc. as per spec. and as required complete in all respect. - 100mm dia (19mm thick insulation)

SITC of CHILLED WATER PIPING (Including Nitrile Rubber Insulation) 'Supplying,Laying/ fixing ,testing and commissioning of following nominal sizes of chilled water piping inside the building (With Necessry clamps, vibration isolators, and Threaded fittings but excluding valves, stariners, gauge etc.)duly insulated with following closed cell elastometric nitrile rubber of min. 45Kg/m3 density, themal conductivity 0.034 w/mk or better at 20 deg mean temp. class O insulation applied by suitable adhesive complete including reparing of damage to building etc. as per spec. and as required complete in all respect. - 80mm dia (19mm thick insulation)

CHILLED WATER PIPING (Including Nitrile Rubber Insulation) 'Supplying,Laying/ fixing ,testing and commissioning of following nominal sizes of chilled water piping inside the building (With Necessry clamps, vibration isolators, and Threaded fittings but excluding valves, stariners, gauge etc.)duly insulated with following closed cell elastometric nitrile rubber of min. 45Kg/m3 density, themal conductivity 0.034 w/mk or better at 20 deg mean temp. class O insulation applied by suitable adhesive complete including reparing of damage to building etc. as per spec. and as required complete in all respect. - 65mm dia (19mm thick insulation)

Supplying,Laying/ fixing ,testing and commissioning of following nominal sizes of chilled water piping inside the building (With Necessry clamps, vibration isolators, and Threaded fittings but excluding valves, stariners, gauge etc.)duly insulated with following closed cell elastometric nitrile rubber of min. 45Kg/m3 density, themal conductivity 0.034 w/mk or better at 20 deg mean temp. class O insulation applied by suitable adhesive complete including reparing of damage to building etc. as per spec. and as required complete in all respect. - 50mm dia (19mm thick insulation)

Supplying,Laying/ fixing ,testing and commissioning of following nominal sizes of chilled water piping inside the building (With Necessry clamps, vibration isolators, and Threaded fittings but excluding valves, stariners, gauge etc.)duly insulated with following closed cell elastometric nitrile rubber of min. 45Kg/m3 density, themal conductivity 0.034 w/mk or better at 20 deg mean temp. class O insulation applied by suitable adhesive complete including reparing of damage to building etc. as per spec. and as required complete in all respect. - 40mm dia (19 mm thick insulation)

Supplying, fixing,testing and commissioning of following butterfly valves. 250mm - Motorised type

Supplying, fixing,testing and commissioning of following butterfly valves. 200mm - Motorised type

Supplying, fixing,testing and commissioning of following Insulated ball valves. - 32mm dia

Supplying, fixing,testing and commissioning of following Insulated ball valves. - 25mm dia

Supplying, fixing,testing and commissioning of binder test points in the chilled water pipelines. With ball valve.

Providing digital themoms with probe suitable for binder test point application.

Supplying, fixing,testing and commissioning of following sizes Insulated balancing valves C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN-16 pressure rating for chilled/Hot water circulation as per the specifications. - 250mm dia

Supplying, fixing,testing and commissioning of following sizes Insulated check valves (Non Return ) with dual plat eof C.I. body SS plates vulcanized NBR seal flanged end & PN-16 pressure rating for chilled/hot water circulation as per the specifications. - 250 mm dia

Supplying, fixing,testing and commissioning of following approved make flow switch complete with copper control wiring at chiller/Condenser outlet of each machine.

Supplying, fixing,testing and commissioning of following Insulated suction guide or suction diffusers/Flowstraighteners or y-Strainer. - 250mm dia

Supplying, fixing,testing and commissioning of following Insulated suction guide or suction diffusers/Flowstraighteners or y-Strainer. - 200mm dia

Supplying, fixing,testing and commissioning of following Insulated Y-Strainers of ductile CI body flanged ends with SS stariner for chilled/hot water circulation as per the specifications. - 32mm dia

Supplying, fixing,testing and commissioning of following Insulated Y-Strainers of ductile CI body flanged ends with SS stariner for chilled/hot water circulation as per the specifications. - 25mm dia

Supplying, fixing,testing and commissioning of following PVC pipes for condensate drain duly insulated with kinny foam & vapour barrier duly secured with adhesive tape as per specification ,cut to required length and installed with all joints , including the necessary fittings. (For all the AHU/FCU units upto the main header in the shaft dor vertical risers) - 50mm dia

Supplying, fixing,testing and commissioning of following PVC pipes for condensate drain duly insulated with kinny foam & vapour barrier duly secured with adhesive tape as per specification ,cut to required length and installed with all joints , including the necessary fittings. (For all the AHU/FCU units upto the main header in the shaft dor vertical risers) - 40mm dia

Supplying, fixing,testing and commissioning of following PVC pipes for condensate drain duly insulated with kinny foam & vapour barrier duly secured with adhesive tape as per specification ,cut to required length and installed with all joints , including the necessary fittings. (For all the AHU/FCU units upto the main header in the shaft dor vertical risers) - 30mm dia

Supplying, fixing,testing and commissioning of following PVC pipes for condensate drain duly insulated with kinny foam & vapour barrier duly secured with adhesive tape as per specification ,cut to required length and installed with all joints , including the necessary fittings. (For all the AHU/FCU units upto the main header in the shaft dor vertical risers) - 25 mm dia

Auto air vent with isolating ball valves - (15 mm dia)

Supplying, fixing,testing and commissioning of following Flexible connection on pipes with guide bolts. - 250mm dia

Supplying, fixing,testing and commissioning of following Flexible connection on pipes with guide bolts. - 200mm dia

Supplying, fixing,testing and commissioning of following Flexible connection on pipes with guide bolts. - 150 mm dia

Supplying, fixing,testing and commissioning of following MS C Heavy class Condenser water piping , cut to required length , and installed with welded joints , including all necessary threaded fittings such as elbows , tees , etc.and confiming to the specifications as detailed in the relevant chapter in the document.Pipes will be accepted in order of preference ( Factory fabricated / Fabricated out of 7mm thick plates duly rolled in a workshop and welded : for pipes beyond 350mm dia) - 80mm dia

Supplying, fixing,testing and commissioning of following MS C Heavy class Condenser water piping , cut to required length , and installed with welded joints , including all necessary threaded fittings such as elbows , tees , etc.and confiming to the specifications as detailed in the relevant chapter in the document.Pipes will be accepted in order of preference ( Factory fabricated / Fabricated out of 7mm thick plates duly rolled in a workshop and welded : for pipes beyond 350mm dia) - 65mm dia

Supplying, fixing,testing and commissioning of following MS C Heavy class Condenser water piping , cut to required length , and installed with welded joints , including all necessary threaded fittings such as elbows , tees , etc.and confiming to the specifications as detailed in the relevant chapter in the document.Pipes will be accepted in order of preference ( Factory fabricated / Fabricated out of 7mm thick plates duly rolled in a workshop and welded : for pipes beyond 350mm dia) - 50mm dia

Supplying, fixing,testing and commissioning of following butterfly valves with C I body SS disc, Nitrile rubber seal & O ring PN-16 pressure rating. - 250 mm dia

Supplying, fixing,testing and commissioning of following butterfly valves with C I body SS disc, Nitrile rubber seal & O ring PN-16 pressure rating. - 32mm dia

Supplying, fixing,testing and commissioning of following balancing valves as per the specifications. - 250mm dia

Supplying, fixing,testing and commissioning of following balancing valves as per the specifications. - 200mm dia

Supplying, fixing,testing and commissioning of following balancing valves as per the specifications. - 150mm dia

Supplying, fixing,testing and commissioning of following check valves (Non Return ) with dual plat eof C.I. body SS plates vulcanized NBR seal flanged end & PN-16 pressure rating as per the specifications. - 250 mm dia

Supplying, fixing,testing and commissioning of following Flexible connection on pipes with guide bolts. - 250mm dia

Supplying, fixing,testing and commissioning of following Flexible connection on pipes with guide bolts. - 200mm dia

Supplying, fixing,testing and commissioning of following Flexible connection on pipes with guide bolts. - 150mm dia

Supplying, fixing,testing and commissioning of following suction Guide/Suction diffusers/Flowstraighteners . - 250mm dia

Supplying, fixing,testing and commissioning of following suction Guide/Suction diffusers/Flowstraighteners . - 200mm dia

Supplying, fixing,testing and commissioning of following suction Guide/Suction diffusers/Flowstraighteners . - 150mm dia

Supply, Fabrication, Installation and testing of Insulated Al. Flexible ducts in accordance with the approved shop floor drawings and specifications and shall also confim to the BIS specifications. - 250 mm Dia.

Supply, Fabrication, Installation and testing of Insulated Al. Flexible ducts in accordance with the approved shop floor drawings and specifications and shall also confim to the BIS specifications. - 150 mm Dia.

Supplying and fixing of Extruded aluminium supply and return air grilles/diffusers/louvres with dampers, supply air plenum etc. duly powder coated as per specifications and drawings. - Aluminium return/exhaust air Valve circular/squirell diffuser without damper.

Supplying and fixing of Extruded aluminium supply and return air grilles/diffusers/louvres with dampers, supply air plenum etc. duly powder coated as per specifications and drawings. - Linear air grilles (150 mm wide)

Supplying and fixing of Extruded aluminium supply and return air grilles/diffusers/louvres with dampers, supply air plenum etc. duly powder coated as per specifications and drawings. - Aluminium supply air collar damper

Supplying and fixing of Extruded aluminium supply and return air grilles/diffusers/louvres with dampers, supply air plenum etc. duly powder coated as per specifications and drawings. - AI Volume control dampers for ducts

Supplying and fixing of Extruded aluminium supply and return air grilles/diffusers/louvres with dampers, supply air plenum etc. duly powder coated as per specifications and drawings. - Jet Diffuser with Butterfly Damper

Supplying and fixing of Extruded aluminium supply and return air grilles/diffusers/louvres with dampers, supply air plenum etc. duly powder coated as per specifications and drawings. - Plenum box for AT

Supplying and fixing of extruded aluminium louvres with frame bird screeen , mounting arrangement etc. as per specifications and drawings. - Fresh Air/Exhaust Louvers

SITC of MOTORIZED FIRE AND SMOKE DAMPERS Spcl. Note: the equipment shall be as per the technical specifications attached and before Dispatch from Factory One Machine shall be reqd. - Bare Fire Dampers with 400 mm sleeve

SITC of Control panel actuator , including Electrical,spring type actuator,remote indication of the fire damper position.

SITC of Interconnecting wiring for the fire alam system with the AHU and the smoke dampers.

SITC of Sealing the openings around the sleeve of the fire dampers with approved fire sealant, as per the recommendations of the manufacturer and specifications.

Supply,Installation,Testing and commissioning of doble layer canvas connection (Fire retardent) as per specification.

Supply & fixing of acoustic insulation for supply air duct using class O rating open cell nitrile rubber with density of 140 kg / m³ with Anti-Microbial Product Protection, and should pass Fungi Resistance as per ASTM and Bacterial Resistance as per ASTM E. Material shall be FM rated as per manufacturer standard, Adhesive shall be as per manufacturer recomendation or standard HVAC practice. - 25mm thick Acoustic open cell insulation on one side for AHU Room acoustic insulation

Supply & fixing of acoustic insulation for supply air duct using class O rating open cell nitrile rubber with density of 140 kg / m³ with Anti-Microbial Product Protection, and should pass Fungi Resistance as per ASTM and Bacterial Resistance as per ASTM E. Material shall be FM rated as per manufacturer standard, Adhesive shall be as per manufacturer recomendation or standard HVAC practice. - 15mm thick Acoustic open cell insulation on one side for Duct acoustic insulation

SITC of DUCT LINE THEmAL INSULATION WITH FRP /IC CLOTH AS FINISH ON EXPOSED AREA AIR DUCT. Two layer 7 mile cloths with adhesive on supply/Return/Exh. air duct on exposed area - 25 mm thick insulation

SITC of DUCT LINE THEmAL INSULATION WITH FRP /IC CLOTH AS FINISH ON EXPOSED AREA AIR DUCT. Two layer 7 mile cloths with adhesive on supply/Return/Exh. air duct on exposed area - 19 mm thick insulation

SITC of DUCT LINE THEmAL INSULATION WITH FRP /IC CLOTH AS FINISH ON EXPOSED AREA AIR DUCT. Two layer 7 mile cloths with adhesive on supply/Return/Exh. air duct on exposed area - 13 mm thick insulation

SITC of DUCT LINE THEmAL INSULATION WITH FRP /IC CLOTH AS FINISH ON EXPOSED AREA AIR DUCT. Two layer 7 mile cloths with adhesive on supply/Return/Exh. air duct on exposed area - 9mm thick insulation

Supply, installation, testing and commissioning of ANTI MICROBIAL TYPE Themal insulation for supply air duct using class " O " Closed cell nitrile rubber based with adhesive as per manufacturer recomendation or standard HVAC standard practice. Insulation manufactured as per ASTM E 84 test & which should also meet NFPA 90A supplementary materials for air distribution system which should not absorbs less 0.2% water by volume (ASTM c 209), should not support microbial growth (ASTM ) and should emit objectionable odors (ASTM C 665) and should have themal conductivity of 0.34 ( R - 2.78 in 3.4" thickness) and water vapor pemeance of 0.10. Material shall be FM approved and preferred color shall be Black - 19mm thick oxide acetate insulation for underceck plain

SITC of HVAC Plant Room Panel‐01 (VAM,Cooling Tower,Pumps etc.) - As per specifications and SLD

Ventilation & Smoke Fan Panel - As per specifications and SLD

HVAC Fan Panel MCC-03 - As per specifications and SLD

HVAC Fan Panel MCC-03 - As per specifications and SLD

HVAC TFA Fan Panel MCC-05 (3 Nos) - As per specifications and SLD

HVAC TFA Fan Panel MCC-06 (4 Nos) - As per specifications and SLD

HVAC TFA Fan Panel MCC-07 - As per specifications and SLD

CABLING (POWER ) Power Cabling and Earthing: Supply, installation, testing & commisioning of Aluminum conductor cables PVC sheathed, amoured cables (Fire Survival) of 1.1 KV grade with temination glands , identification tags, clamps and saddles etc. - 3Cx35 Sqmm

CABLING (POWER ) Power Cabling and Earthing: Supply, installation, testing & commisioning of Aluminum conductor cables PVC sheathed, amoured cables (Fire Survival) of 1.1 KV grade with temination glands , identification tags, clamps and saddles etc. - 3Cx50 Sqmm

CABLING (POWER ) Power Cabling and Earthing: Supply, installation, testing & commisioning of Aluminum conductor cables PVC sheathed, amoured cables (Fire Survival) of 1.1 KV grade with temination glands , identification tags, clamps and saddles etc. - 3Cx 06 Sqmm

CABLING (POWER ) Power Cabling and Earthing: Supply, installation, testing & commisioning of Aluminum conductor cables PVC sheathed, amoured cables (Fire Survival) of 1.1 KV grade with temination glands , identification tags, clamps and saddles etc. - 3Cx04 Sqmm

CABLING (POWER ) Power Cabling and Earthing: Supply, installation, testing & commisioning of Aluminum conductor cables PVC sheathed, amoured cables (Fire Survival) of 1.1 KV grade with temination glands , identification tags, clamps and saddles etc. - 2Cx04 Sqmm (Cu Conductor)

CABLING (POWER ) Power Cabling and Earthing: Supply, installation, testing & commisioning of Aluminum conductor cables PVC sheathed, amoured cables (Fire Survival) of 1.1 KV grade with temination glands , identification tags, clamps and saddles etc. - 4Cx 06 Sqmm

Control Cabling Supply, installation, testing & commisioning of Copper conductor , PVC insulated (Fire Survival), PVC sheathed amoured cable of 1.1 KV grade (Which is Interconnecting wiring for the fire alam system with the AHU and the smoke dampers and AHU to Panel), INCLUDING THE TEmINATIONS ON EITHER ENDS - 8C x 1.5 Sqmm

Supply, installation, testing & commisioning of Copper conductor , PVC insulated (Fire Survival), PVC sheathed amoured cable of 1.1 KV grade (Which is Interconnecting wiring for the fire alam system with the AHU and the smoke dampers and AHU to Panel), INCLUDING THE TEmINATIONS ON EITHER ENDS - 3C x .5 Sqmm

Supply, installation, testing & commisioning of Copper conductor , PVC insulated (Fire Survival), PVC sheathed amoured cable of 1.1 KV grade (Which is Interconnecting wiring for the fire alam system with the AHU and the smoke dampers and AHU to Panel), INCLUDING THE TEmINATIONS ON EITHER ENDS - 2C x .5 Sqmm

CABLE TRAYS Supplying and installing following size of perforated Hot dipped G.I. cable trays, G.I. bends with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with suitable suspenders above in general points complete as required. - 100 mm. Width x 50mm. Depth x 1.6mm. Thickness.

Supplying and installing following size of perforated Hot dipped G.I. cable trays, G.I. bends with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with suitable suspenders above in general points complete as required. - 150 mm. Width x 50mm. Depth x 1.6mm. Thickness.

Supplying and installing following size of perforated Hot dipped G.I. cable trays, G.I. bends with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with suitable suspenders above in general points complete as required. - 225 mm. Width x 50mm. Depth x 1.6mm. Thickness.

Supplying and installing following size of perforated Hot dipped G.I. cable trays, G.I. bends with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with suitable suspenders above in general points complete as required. - 300 mm. Width x 50mm. Depth x 1.6mm. Thickness.

Supplying and installing following size of perforated Hot dipped G.I. cable trays, G.I. bends with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with suitable suspenders above in general points complete as required. - 450 mm. Width x 50mm. Depth x 1.6mm. Thickness.

EARTHING CONNECTIVITY Supplying and Laying following size of G.I. wire on surface or in recess for loop earthing alongwith the existing surface/ recessed conduit/ submain wiring / on cable tray/ on surface including G.I. clamps etc. complete as required. - 6 SWG G.I. wire

JOINTS FOR ABOVE CABLES - 3Cx35 Sqmm

JOINTS FOR ABOVE CABLES - 3Cx50 Sqmm

JOINTS FOR ABOVE CABLES - 3Cx 06 Sqmm

JOINTS FOR ABOVE CABLES - 3Cx04 Sqmm

JOINTS FOR ABOVE CABLES - 2Cx04 Sqmm (Cu Conductor)

JOINTS FOR ABOVE CABLES - 4Cx 06 Sqmm

Supply & Installation of Polystyrene (High Density XPS) - Density 32 Kg/m3 with 25 mm thick ,which need to fix on finished slab with 2" screw with plastic sheet of 80 GSM to be laid as vapour barrier.

Supply & Installation of PE Plastic track /Pattern foil to be laid on XPS insulation used for guiding the PEX pipes to be fixed on the insulation with the help of fixing clips.

Supply & Installation of Wall insulation self sticking type .Which need to fix on pheriphery of zone, so that energy from screed is not being transferred to Wall. Width of insulation shall be 150mm and thickness shall be 8mm.

SITC of SECONDARY PIPING FOR RADIANT COOLING Manifold Box with accessories Spcl. Note: the equipment shall be as per the technical specifications attached and before Dispatch from Factory One Machine shall be reqd. - suitable for 10 Loops

SITC of Nitrile Rubber Class "O" Insulation for PEX Piping - 16mm dia - 9mm thick

SITC of Themoregulation - valve type 1

SITC of Themoregulation - valve type 2

SITC of Themoregulation - valve type 3

Chilled Water Pump Supply, installation, testing and commissioning of End suction top discharge back pull out long coupled type pump mounted on a common base with electric motor for re-circulation of water for the central air conditioning system. The pumps shall be flexible coupled protected by coupling guard, with CI casing, Bronze/SS (CF8) impeller, high strength steel shaft, mechanical seals and MS fabricated base plate .The pump motor (TEFC squirrel cage induction motor with class-F insulation) shall be suitable for 415± 10% volts, 50 cycles, 3 phase AC power supply of IE3 efficiency class. Pump, base, coupling and motor shall be factory assembled. All required fittings & accessories, vibration isolation arrangement by means of rubber type mounting, foundation nuts, bolts complete as required - 8640 LPH (38 GPM) - For Radiant System

Supply, installation, testing and commissioning of End suction top discharge back pull out long coupled type pump mounted on a common base with electric motor for re-circulation of water for the central air conditioning system. The pumps shall be flexible coupled protected by coupling guard, with CI casing, Bronze/SS (CF8) impeller, high strength steel shaft, mechanical seals and MS fabricated base plate .The pump motor (TEFC squirrel cage induction motor with class-F insulation) shall be suitable for 415± 10% volts, 50 cycles, 3 phase AC power supply of IE3 efficiency class. Pump, base, coupling and motor shall be factory assembled. All required fittings & accessories, vibration isolation arrangement by means of rubber type mounting, foundation nuts, bolts complete as required - 20440 LPH (90 GPM) - For Radiant System

Supply, installation, testing and commissioning of End suction top discharge back pull out long coupled type pump mounted on a common base with electric motor for re-circulation of water for the central air conditioning system. The pumps shall be flexible coupled protected by coupling guard, with CI casing, Bronze/SS (CF8) impeller, high strength steel shaft, mechanical seals and MS fabricated base plate .The pump motor (TEFC squirrel cage induction motor with class-F insulation) shall be suitable for 415± 10% volts, 50 cycles, 3 phase AC power supply of IE3 efficiency class. Pump, base, coupling and motor shall be factory assembled. All required fittings & accessories, vibration isolation arrangement by means of rubber type mounting, foundation nuts, bolts complete as required - 27260 LPH (120 GPM) - For Radiant System

Supply, installation, testing and commissioning of 10G Base LR Single-Mode

Supply, installation, testing and commissioning of 10G Base LR Single-Mode

Supply, installation, testing and commissioning of 10GBASE-CU SFP+ Cable 1 Meter

Supply, installation, testing and commissioning of 1 GbE SFP Copper Module

Supply, installation, testing and commissioning of Wall Mount Bracket

Supply, installation, testing and commissioning of 2Mp Bullet Camera Indoor/Outdoor, 1/2.8" progressive scan CMOS Ÿ BLC/3D DNR/HLC 1920 × 1080@30fps, Up to 40 m IR range 2.8 mm/4 mm/6mm fixed lens, IP67 2 Behavior analyses Three streams

Supply, installation, testing and commissioning of 8TB HDD

Supply, installation, testing and commissioning of LongSpan Lite Convertor, Extends Ethernet Networks, Compatible with Cat5e and Cat6 Cabling, Increases IP Camera Range up to 3500' Unrestricted 10/100Mbps Connection

Supply, installation, testing and commissioning of 12V DC HighHWire Power Supply

Supply, installation, testing and commissioning of Celing Mount Camera Kit

Supply, installation, testing and commissioning of 64CH NVR, 512Mbps Bit Rate Input Max(up to 128-ch IP video), 24 SATA Interfaces, alarm I/O: 16/8, RAID0,1,5,6,10 supported, 4U case,19"

Supply, installation, testing and commissioning of Floor Mount Pole for PTZ camera

Supply, installation, testing and commissioning of PTZ camera outdoor with 150 metre range, 5-inch 2 MP 25X Powered by DarkFighter IR Network Speed Dome High quality imaging with 2 MP resolution Excellent low-light performance via powered-by-DarkFighter technology Clear imaging against strong back lighting due to 120 dB WDR technology Pan and tilt ability enables camera to monitor zones of interest 25x optical zoom allows for closer viewing of subjects in expansive areas Up to 150m IR range ensures safety at night Water and dust resistant (IP66).

Supply, installation, testing and commissioning of 10G L2 Cld-Mngd 24x GigE 370W PoE Switch, 24 × 10/100/1000BASE-T Ethernet (RJ45), 4 × 10G SFP+ ports for uplinks, Auto-negotiation and crossover detection, Switching capacity: 128 Gbps Forwarding rate: 95.23 mpps, Jumbo frame support (9578 byte Ethernet frame), Flow control

Supply, installation, testing and commissioning of Enterprise License and Support, 5YR Managed via the Web with the cloud management platform, Integrated with Wireless and complete portfolio of IT products and solutions, Zero-touch remote provisioning (no staging needed), Detailed historical per-port and per-client usage statistics, Operating system, device, and hostname fingerprinting, SNMP and SYSLOG support for integration with other network management solutions Automatic firmware upgrades with scheduling control

Supply, installation, testing and commissioning of 10G L2 Cld-Mngd 48x GigE 740W PoE Switch, 48 × 10/100/1000BASE-T Ethernet (RJ45), 4 × 10G SFP+ ports for uplinks, Auto-negotiation and crossover detection, Switching capacity: 176 Gbps Forwarding rate: 130.95 mpps, Jumbo frame support (9578 byte Ethernet frame), Flow control

Supply, installation, testing and commissioning of Enterprise License and Support, 5YR Managed via the Web with the cloud management platform, Integrated with Wireless and complete portfolio of IT products and solutions, Zero-touch remote provisioning (no staging needed), Detailed historical per-port and per-client usage statistics, Operating system, device, and hostname fingerprinting, SNMP and SYSLOG support for integration with other network management solutions Automatic firmware upgrades with scheduling control

Supply, installation, testing and commissioning of L3 Cld-Mngd 32x 10G SFP+ Switch, Switch ports/stacking ports 32 × 10G SFP+ ports 2 × 40G QSFP+ uplinks Up to 800 Gbps of switching capacity, 160G flexible stacking Static routing, OSFPv2, Multicast routing, Warm spare (VRRP), DHCP Relay, DHCP Server

Supply, installation, testing and commissioning of Enterprise License and Support, 5YR Managed via the Web with the cloud management platform, Integrated with Wireless and complete portfolio of IT products and solutions, Zero-touch remote provisioning (no staging needed), Detailed historical per-port and per-client usage statistics, Operating system, device, and hostname fingerprinting, SNMP and SYSLOG support for integration with other network management solutions Automatic firmware upgrades with scheduling control

Supply, installation, testing and commissioning of Router/Security Appliance Stateful firewall, 1:1 NAT, DHCP, DMZ, static routing, Identity-based policies Auto VPN™ self-configuring site-to-site VPNClient VPN (IPsec)User and device quarantineVLAN support and DHCP services, Content filtering (Webroot BrightCloud CIPA-compliant URL database), Web search filtering (including Google and Bing SafeSearch), Intrusion prevention (SourceFire Snort based), Cisco Advanced Malware Protection (AMP), Requires Advanced Security License

Supply, installation, testing and commissioning of Advanced Security License and Support, 5YR, Web based management and configuration Throughput, connectivity monitoring and alerts Network asset discovery and user identificationBuilt-in network-wide reporting, monitoring and alerts, Centralized policy management, Real-time diagnostic and troubleshooting over the web, Automatic firmware upgrades and security patches, Searchable network-wide event logs

Supply, installation, testing and commissioning of AC Power Cord

Supply, installation, testing and commissioning of Wi-Fi 6 Indoor AP, Radios 2.4 GHz 802.11b/g/n/ax client access radio 5 GHz 802.11a/n/ac/ax client access radio 2.4 GHz and 5 GHz dual-band WIDS/WIPS, spectrum analysis, and location analytics radio 2.4 GHz Bluetooth Low Energy radio with Beacon support Concurrent operation of all four radios Max aggregate frame rate: 1.7 Gbps Supported frequency bands (country-specific restrictions apply): 2.412-2.484 GHz 5.150-5.250 GHz (UNII-1) 5.250-5.350 GHz (UNII-2) 5.470-5.600, 5.660-5.725 GHz (UNII-2e) 5.1725-5.825 GHz (UNII-3)

Supply, installation, testing and commissioning of Enterprise License, 5YR, Integrated Layer 7 firewall with mobile device policy management, Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal, Flexible guest access with device isolation, VLAN tagging (802.1Q) and tunneling with IPSec VPN, PCI compliance reporting, WEP*, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 - Personal, WPA3 - Enterprise, WPA3 - Enhanced Open (OWE) EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM,TKIP and AES encryption,Enterprise Mobility Management (EMM) and Mobile Device Management (MDM) integration

Mini DisplayPort to HDMI Adapter (ADC-MDP/HF)

Active Optical Glass HDMI Cable 30 Mtrs. Male to Male

55 inch 4K Mainstream Proff Display for AVSI & Digital Signage Project with Crystal Processor 4K/ Boundless Design/ Dynamic Crystal Color/3 Bezel less/ Stereo Mini Jack/ HDMI /RS232 / USB / RJ45 /Built-in-Speakers/ Haze coating/ Tizen 4.0/1.7GHz Quad-Core CPU/ 8GB Storage/ 8MS Response time/ EMC class B compliant/ IP5X for Dust Proofing/ MagicINFOLite

Desktop PC Core i5 8th Gen., 64GB DDR4 RAM, 1Tb HDD, No Optical, Window 10 Prof., KBD, Mouse, 3yr warranty without TFT,Nvidia Quadro 4GB Graphic P1000 PNY

Installation, Configuration, Testing and 3 years onsite support Charges

Installation, Configuration, Testing and 3 years onsite support Charges

Supply, installation, testing and commissioning of Cat6 UTP Cable

Supply, installation, testing and commissioning of Cat6 Outdoor UTP Cable

Supply, installation, testing and commissioning of PowerCat6 DataGate Jack, Shuttered - User Side

Supply, installation, testing and commissioning of PowerCat6 DataGate Jack, Shuttered - Rack Side

Supply, installation, testing and commissioning of Wall Plate 2 Port / 1 port - 86mmx86mm- White

Supply, installation, testing and commissioning of 24 Port Data Patch Panel UN Loaded

Supply, installation, testing and commissioning of Cat 6 Patch cord, 2 Mtr, - User Side

Supply, installation, testing and commissioning of Cat 6 Patch Cord - 2 Mts - Rack Side

Supply, installation, testing and commissioning of 24 Port Data Patch Panel UN Loaded for UPLINK in Server Room

Supply, installation, testing and commissioning of PowerCat6 DataGate Jack, Shuttered - for UPLINK in Server Room

Supply, installation, testing and commissioning of Cat 6 Patch cord, 2 Mtr, - for UPLINK in Server Rm

Supply, installation, testing and commissioning of all mount rack 9Uwith PDU HORIZONTAL 5X15AMP WITH 6 SOCKET WITH 16AMP MCB AND INDICATOR WITH 3MTR CABLE

Supply, installation, testing and commissioning of CLOSED Rack 800X1000MM, with 2nos of PDU HORIZONTAL 5X15AMP WITH 6 SOCKET WITH 16AMP MCB AND INDICATOR WITH 3MTR CABLE, 2 hardware front panel MTG, 5 nos. Cable manager 1U closed hinge type

Supply, installation, testing and commissioning of Single 6 core OFC MM Armoured Cable

Supply, installation, testing and commissioning of 12 Port Fully Loaded LIU with Single Mode Pigtails. (LC Type)

Supply, installation, testing and commissioning of 24 Port Fully Loaded LIU with Single Mode Pigtails. (LC Type)

Supply, installation, testing and commissioning of LC-LC Fiber Patch Cord single mode 3Mtr

Supply, installation, testing and commissioning of AC Power Cord

Supply, installation, testing and commissioning of AC Power Cord for MX and MS (India Plug)

Installation for UTP cable Laying

Installation for Outdoor cable Laying

Installation for Cable connectorisation of I/O & Termination Plug both patchpanels & Field side.

Installation for Rack Installation

Installation for Documentation, Fluke DTX1800 Testing

Installation for Laying of OFC Cable

Installation for OFC Pigtel Splicing and consumable kit

Installation for Fibre Documentation, OTDR Testing & Certification

Installation for Site Supervision, Project Management Charges

Installation, Configuration, Testing and 3 years onsite support Charges

Installation, Configuration, Testing and 3 years onsite support Charges

WATER BOOSTER PUMP FOR FLUSHING WATER : Supplying & supervision of testing & commissioning of package vertical Hydropneumatic system, comprising of 2.0 nos. (1 duty + 1 stand by) Electrical Driven inline pumping sets each of 3.0 LPS to a head to 60 meter with all accessories, Pumps shall be with C.I. Base, S.S 304, impeller, shaft, mechanical seal, S.S. Shaft directly coupled to motor suitable for operation on 400/440 volts, 3 phase 2900 RPM. TEFC electronic motor mounted on a common channel baseplate 150mm dia pressure gauge, GM isolation cock and cement concrete foundation with plaster with dunlop cushy foot mountings with all accessories such as NRVs, valves, pressure switch, common suction and delivery header, bellows on sucton and delivery side complete in all repsects. - Flow Rate : 3.0LPS (1 working + 1 stand by), Head : 60 M, 2900 RPM

Supplying and fixing of PVC/HDPE/FRP tank including electrical operated ming/dosing pump for dosing of alum/sodium hypo-chlorite solutions in pipeline (all contacting parts shall be of stainless steel). Capacity - 0-12 LPH - Capacity -0-12 LPH

Supplying, storing, handling, installation, testing & commissioning of Vertical Dual Media Filter made out of MSEP/FRP composite Vessel complete suitable for test pressure of 7 Kg./cm2 with top and bottom dished ends, self supporting legs, manhole, hand hole, initial filling of Graded sand and gravels, pressure gauges, sampling cock, air vent, frontal MS/UPVC Piping, diaphragam valves for inlet, outlet, backwash inlet, backwash outlet drain etc. - Capacity : 2.5 LPS,Working Pressure : (5 ± 2.5)MWC

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar confoming to IS : 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's pemanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. - as per specs

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement cincrete 1:2:4 mix (1cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) cement plastered on both sides with cement mortar 1:3 (1cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete for pipes 100 to 230mm dia. - as per specs

Providing laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. - 150 mm diam

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) alround SW pipes including bed concrete as per standard design. - 150 mm diam

Providing and fixing square mouth SW gully trap grade ‘A’ complete CI grating brick masonry chamber with bricks of class designation 75 and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 13.00 kg and frame to be not less than 5 kg. as per standard design. (COVER MIN. 4.5 KG & FRAME MIN.2.7 KG ) - 180x150 mm size P type With FPS bricks

Providing and laying non-pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. (for stom drainage) - 150 mm dia RCC pipe

Providing and laying non-pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. (for stom drainage) - 250 mm dia RCC pipe

Providing and laying non-pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. (for stom drainage) - 300 mm dia RCC pipe

Providing and laying non-pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. (for stom drainage) - 450 mm dia RCC pipe

SEWERAGE NETWORK Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : - as per specs

Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia-All kinds of soil - up to 1.50 m depth

Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 metre). - as per specs

Providing and laying in position cement concrete of grade excluding the cost of centering and shuttering - all work up to plinth level - 1:5:10 (1 cement : 5 coarse sand : 10 graded ston aggregate 40 mm nominal size)

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement cincrete 1:2:4 mix (1cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) cement plastered on both sides with cement mortar 1:3 (1cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete for pipes 100 to 230mm dia. - as per specs

Constructing brick masonry road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1:5 (1 cement : 5 fine sand) including 500 x 450 mm (heavy duty) precast RCC horizontal grating with frame complete as per standard design - - with FPS bricks

Providing and laying non-pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. (for stom drainage) - 150 mm dia RCC pipe

Providing and laying non-pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. (for stom drainage) - 250 mm dia RCC pipe

Providing and laying non-pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. (for stom drainage) - 300 mm dia RCC pipe

Constructing brick masonry manhole with F.P.S. bricks in cement mortar 1 : 4 (1 cement : 4 coarse sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 grade stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1cement 3 coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finishd with a floating coat of neat cement complete as per standard design-With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 - Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

Constructing brick masonry manhole with F.P.S. bricks in cement mortar 1 : 4 (1 cement : 4 coarse sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 grade stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1cement 3 coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finishd with a floating coat of neat cement complete as per standard design-With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 - Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diam, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :

Extra for depth for manhole with F.P.S. bricks - size 90 X 80 cm

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 - Size 120x90 cm

Providing and laying in position cement concrete of grade excluding the cost of centering and shuttering - all work up to plinth level. - 1:5:10 (1 cement : 5 coarse sand : 10 graded ston aggregate 40 mm nominal size)

Painting GI pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality - 25 mm dia, nominal bore

Painting GI pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality - 75 mm nominal bore

BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. - 80 nominal bore

NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified. - 80 nominal bore

Providing and filling sand of grading zone V or coarser grade all-round the G.I. pipes in external work. - 25mm nominal bore

Providing and filling sand of grading zone V or coarser grade all-round the G.I. pipes in external work. - 80mm nominal bore

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : - 80 mm dia

Providing & fixing of Garden hydrant outlet consisting 1 No. 20mm dia. Ball valve, Bib cock (Brass) for connecting rubber hose, pipes & fittings - Bib Cock - 20mm

Providing & fixing of Garden hydrant outlet consisting 1 No. 20mm dia. Ball valve, Bib cock (Brass) for connecting rubber hose, pipes & fittings - Ball Valve - 20mm

Constructing masonry chamber 30x30x50 cm,inside with 75 class designation brick work in cement mortar 1:4 (1 cement:4 coarce sand) for stop cock complete with C.I. surface box 100x100x75mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 corase sand: 4 graded stonr aggregate 20mm nominal size) necessary excavation foundation concret 1:5:10 (1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortor 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design.

Providing and fixing G.I. pipes complete with G.I. fittings including ,trenching and refilling etc., extrenal works - 25mm nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including ,trenching and refilling etc., extrenal works - 80 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : - 25mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : - 80mm nominal bore

Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 1.5 M including getting out the excavated soil (HARD OR SOFT) and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50m. [hard/Dense soil] All kind of soil,Pipes,cables etc.exceeding 80mm dia.but not exceeding 300mm dia.

Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5m,but not exceeding 3 m.(Rate is over corresponding basic item for depth up to 1.5 metre).

Structual steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Supplying & fixing of float based visual flow m (Rotam) suitable for water flow rate of 18000 litres per hour in the input line of water softener including matching flanges, nuts, bolts and 3 mm thick rubber insertions/gaskets complete. to assess the water flow rate in water softener. - FLOW RATE 18000 LPH

Painting (two or more coats) on Cl/SCI rain water, soil waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture, over and including a priming of ready mixed zinc chromate yellow primer on new work: 100 mm diameter pipes

Painting with synthetic enamel paint of approved drand and manufacture to give an even shade - Two more coast on new work

Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K- 9 conforming to IS: 8329: 100mm ductile iron double flanged

Hubless centrifugally cast iron pipes epoxy coated inside & outside IS : 15905 - 100mm dia

Providing and fixing MS holder bat clamps of approved design to cast iron (spun) pipe embedded in and Including cement concrete blocks 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. - For 100mm dia. Pipe

Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. - 100mm

Providing and fixing plain bend of required degree. - 100mm dia

Providing and fixing double equal plain junction of required degree. - 100x100x100x100 mm

Providing and fixing single equal plain junction of required degree : - 100X100X100mm

Providing and fixing single unequal plain junction of required degree - 100x 100x75 mm

Providing and fixing Hubless cast iron offsets epoxy coated inside & outside as per IS : 15905 with 100 mm dia - 130 mm offsets

Providing and fixing teminal guard: - 100mm

Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe - 100mm

SS 304 grade coupling with EPDM rubber gasket - 100mm

Providing and fixing cast iron trap of self cleansing design with cast iron screwed down or hinged grating with or without vent am complete, including cost of cutting and making good the walls and floors. - 100 mm inlet and 75 mm outlet Hubless centrifugally cast iron pipes epoxy coated inside & outside IS : 15905

Providing and fixing G.I. pipes complete with GI fittings and clamps including cutting and making good the walls etc. (internal work) - 40 mm dia, nominal bore

Providing and fixing G.I. pipes complete with GI fittings and clamps including cutting and making good the walls etc. (internal work) - 50 mm dia, nominal bore

Providing & fixing on wall face unplasticised -Rigid PVC rain water pipes confoming to IS:13592 Tyape A included jointing with seal ring conforning to IS:5382 leaving 10 mm gap for themal expansion. (i)Single socketed pipes. - 110 mm diam

Providing, fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised - Rigid PVC rain water pipes confoming to IS ; 13592 Type A including jointing with seal ring confoming to IS ; 5382 leaving 10 mm gap for themal expansion. - Coupler -110 mm diam

Providing, fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised - Rigid PVC rain water pipes confoming to IS ; 13592 Type A including jointing with seal ring confoming to IS ; 5382 leaving 10 mm gap for themal expansion. - Bend -87.5 deg -110 mm diam

Providing, fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised - Rigid PVC rain water pipes confoming to IS ; 13592 Type A including jointing with seal ring confoming to IS ; 5382 leaving 10 mm gap for themal expansion. - Shoe -110mm shoe

Providing & fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with .M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4(1cement : 4 coarse sand) and making good the wall etc. complete. - 110 mm dia

Providing and fixing PTM grating of approved quality and colour circualr type - 125 mm nominal dia

Irrigation water Transfer Pump set Providing, fixing, commissioing and testing package vertical Irrigation water pumps, comprising of Electrical Driven inline pumping with all accessories, Pumps shall be with C.I. Base, S.S 304, impeller, shaft, mechanical seal, S.S. Shaft directly coupled to motor suitable for operation on 400/440 volts, 3 phase 2900 RPM. TEFC electronic motor mounted on a common channel baseplate 150mm dia pressure gauge, GM isolation cock and cement concrete foundation with plaster with dunlop cushy foot mountings with all accessories such as NRVs, valves, pressure guage bourden type, common suction and delivery header, bellows on sucton and delivery side complete in all repsects. - Flow Rate :4.0, LPS (1 working + 1 stand by), Head : 50 M, 5.5 HP EACH

CUBICAL PANEL BOARD FOR i) For 2.0 x 2.5 HP Filter Feed Pumps (1 duty + 1 stand by) , iii) For 2.0 x 5.0 HP Hydropneumatic system(1 Duty + 1 Stand by) - (only isolator), iv) For 10.0 x 2.0 HP Waste Sump Pumps Basement (1 Duty + 1 Stand by) - (only isolator). - Pump room - AS PER SLD

Supplying, filling, spreading & levelling stone boulders of size range 5cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. - as per the specfications

Supplying, filling, spreading & levelling gravel of size range 5mm to 10mm, in recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. - as per the specfications

Supplying, filling, spreading & levelling coarse sand of size range 1.5mm to 2mm, in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer-in-charge. - as per the specfications

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tube well as per IS:2800 (part I). - 100 mm dia

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS:2800(Part I ), including collecting sample from different strata , preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90m depth below ground level. All types of soil - 300 mm dia

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing (CM) pipe of required dia, confoming to IS: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of Engineer-in-charge. - 150mm nominal size dia

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well screen(mS) pipes with ribs, confoming to IS: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of Engineer-in-charge. - 150 mm nominal size dia

Rain water harvesting tank. Please refer the working drawing attached as per technical specifications. 4 Tank each of size 4.5mx4.5mx3.6m

RAIN WATER HARVESTING SYSTEM RAIN HARVESTING PITS AS PER THE STANDARD SPECIFICATIONS AND ANCILLIARY WORKS Spcl. Note: the equipment shall be as per the technical specifications attached and before Dispatch from Factory One Machine shall be reqd. - as per the specfications Contractor shall consider 400 mm dia. Bore size for boring of wells and supply all pipes, fittings, media, caps etc. as per standard practices or as per requirement of local authority.

Kitchen sink with drain board - 510X1040mm bowl depth 200mm.

Sink without drain board - 610X510 mm bowl depth 200mm.

Providing and fixing uplasticised PVC connection pipe with brass unions - 30 cm length

Providing and fixing uplasticised PVC connection pipe with brass unions - 45 cm length

Providing and fixing CP Brass shower rose with 15 or 20 mm inlet - 100 mm diam

Providing and fixing C.P. brass bib cock of approved quality confiming to IS:8931 - 15mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality confoming to IS standards and weighing not less than 690 gms. - 15mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality confoming to IS 8931 a) 15 mm nominal bore. - 15 mm nominal bore

Providing & fixing PTm towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealed fittings arrangement of approved quality and colour weighing not less than 88 gms - as per specs

Providing and fixing PTm towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. - 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge . - a) 15 mm nominal dia.

Providing and fixing PTm soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting rrangements, weighing not less than 106 gms.

Providing & fixing PVC waste pipe for sink Including PVC waste fitting Complete Flexible Pipe - 32mm Dia

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge..(sink & urinal) - as per specs

Providing and fixing wash bashin with C.I. brackets, 15mm dia cp brass singal hole basin mixer of approved quility and make, including painting of fittings and brackets, cutting and making good the walls wherever required - - a) White vitreous china wash basin size 550x400 mm with a 15 mm cp brass singal hole basin mixer.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing: - Rectangular shape 453x357 mm

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) confoming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: - White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in-charge - as per specs

Providing and fixing toilet paper holder: - C.P. brass

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water ( 250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge..

Providing and fixing cast iron trap of self cleansing design with cast iron screwed down or hinged grating with or without vent am complete, including cost of cutting and making good the walls and floors. - 100 mm inlet and 100 mm outlet Hubless centrifugally cast iron pipes epoxy coated inside & outside IS : 15905

Providing and fixing floor mounted, biological sustainable Ecoloo flush less water closet. - as per specs

Providing & fixing stone slab table rubbed, edges rounded and polished of size 75 X 50cm deep and 1.8 cm thick fixed in urinal patitions by cutting chase of appropriate width with chase cutter and embedding the stone in chase with epoxy grout or with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregste 6mm nominal size) as per Engineer-in-charge and finished smooth - White Agaria Marble Stone

Supply, installation, testing and commissioning of wall mounted 1 nos Stainless Steel Handicap DISABLED GRAB BAR (U SHAPE) - (SET OF 2)including cutting & making good the walls.- Handicap Toilet or Equivalent

STP OF Daily average flow - 20 KLD , Nature of effluent - Sewage WITH Influent Characteristics : pH - 6.5-8.0, BOD5 - 250-300 mg/liter, S. Solids - 250-300 mg/liter, COD - 400- 600 mg/liter, Oil & Grease - <50 mg/liter AND Effluent discharge standard : pH - 6.5 - 8.0, BOD Less than 10 mg/liter , S. Solids - Less than 10 mg/liter ,Oil & Grease - < 5 mg/lt

Supplying & supervision of testing & commissioning of Booster Pumpset (Hydropneumatic systems) as described here: Supplying & supervision of testing & commissioning of package vertical Hydropneumatic system, comprising of 2.0 nos. (1 duty + 1 stand by) Electrical Driven inline pumping sets each of 3.0 LPS to a head to 60 meter with all accessories, Pumps shall be with C.I. Base, S.S 304, impeller, shaft, mechanical seal, S.S. Shaft directly coupled to motor suitable for operation on 400/440 volts, 3 phase 2900 RPM. TEFC electronic motor mounted on a common channel baseplate 150mm dia pressure gauge, GM isolation cock and cement concrete foundation with plaster with dunlop cushy foot mountings with all accessories such as NRVs, valves, pressure switch, common suction and delivery header, bellows on sucton and delivery side complete in all repsects.Pump mounted or wall mounted microprocessor based controller, Electronic control panel with frequency inverter, logic controller relays, pressure sensor, pressure sensor transmitter, electrical wiring, cabling from panel to pumps, level controller, two lined LCD display, diodes to indicate pump ready, pump running and fault capable to communicate with toher RS 485 interface. with Power box equipped with fuses or isolators or circuit breakers as required. complete with all accessories as per manufacturer specifications. Suction & Delivery Header - SS 304, Control Valve On suction and Delivery - Ball Valve Only (No Butterfly Valve Accepted), Flow Prevention - Only Check Valve, One Number Variable frequency Drive, stain less steel Impeller and Shaft, RPM 2900,Mover : Electric Motor, - Flow Rate : 3.0 LPS (1 working + 1 stand by), Head : 60 M, 2900 RPM

Providing and filling sand of grading zone V or coarser grade all-round the G.I. pipes in external work. - 25mm nominal bore

Providing and filling sand of grading zone V or coarser grade all-round the G.I. pipes in external work. - 32mm nominal bore

Providing and filling sand of grading zone V or coarser grade all-round the G.I. pipes in external work. - 65mm nominal bore

Providing and filling sand of grading zone V or coarser grade all-round the G.I. pipes in external work. - 50mm nominal bore

Providing and filling sand of grading zone V or coarser grade all-round the G.I. pipes in external work. - 80mm nominal bore

Providing and fixing GI pipes medium class confeming to IS 1239 with GI fittings including cutting hole chase painted with primer, two coats of enamel paints etc - 100 mm dia, NB

Painting GI pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality - 25 mm dia, nominal bore

Painting GI pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality - 32 mm dia, nominal bore

Painting GI pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality - 50 mm dia, nominal bore

Painting GI pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality - 65 mm dia, nominal bore

Painting GI pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality - 80mm nominal bore

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : - 50 mm dia

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : - 80 mm dia

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : - 100 mm dia

Providing & Fixing C.I.sluice valve(with cap) complete with bolts,nuts,rubber insertions etc.(the tail pieces if required will be paid separately) - 100 mm dia.pipe

Constructing masonry chamber 30x30x50 cm,inside with 75 class designation brick work in cement mortar 1:4 (1 cement:4 coarce sand) for stop cock complete with C.I. surface box 100x100x75mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 corase sand: 4 graded stonr aggregate 20mm nominal size) necessary excavation foundation concret 1:5:10 (1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortor 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design.

Constructing masonry Chamber 60X60X75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement: 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diam, 160 mm bottom diam and 180 mm deep (inside) with channel lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone sggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design: - With F.P.S. bricks

Providing and fixing in position 25 mm diam mosquito proof coupling of approved municipal design. - AS PER SOECIFCAIONS

Providing and fixing G.I. pipes complete with G.I. fittings including ,trenching and refilling etc. - 25mm nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including ,trenching and refilling etc. - 32mm nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including ,trenching and refilling etc. - 50mm nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including ,trenching and refilling etc. - 65mm nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including ,trenching and refilling etc. - 80mm nominal bore

Making connection of GI distribution branch with GI main of 50-80mm nominal bore by providing and fixing tee, including cutting and threading the pipe etc. complete.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : - 25mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : - 32 mm dia, nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : - 50mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : - 65mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : - 80mm nominal bore

BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. - 100 nominal bore

BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. - 80 nominal bore

BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. - 65 nominal bore

NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified. - 100 nominal bore

NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified. - 80 nominal bore

Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 1.5 M including getting out the excavated soil (HARD OR SOFT) and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50m. [hard/Dense soil] - Pipes,cables etc.exceeding 80mm dia.but not exceeding 300mm dia.

Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5m,but not exceeding 3 m.(Rate is over corresponding basic item for depth up to 1.5 metre). - as per speciifications

Structual steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Supplying, storing, handling, installation, testing & commissioning of Vertical Activated Carbon Filter made out of MSEP/FRP composite Vessel complete suitable for test pressure of 7 Kg./cm2 with top and bottom dished ends, self supporting legs, manhole, hand hole initial filling of Activated Carbon, pressure gauges, sampling cock, air vent, frontal MS/UPVC piping, diapharagam valves for intlet, outlet, backwash inlet, backwash outlet drain etc. - Capacity : 2.5 LPS,Working Pressure : (5 ± 2.5)MWC

Providing and fixing gun metal non- return valve of approved quality (PN 1.6) - 40 nominal bore

Providing and fixing gun metal non- return valve of approved quality (PN 1.6) - 50 nominal bore

Providing and fixing gun metal non- return valve of approved quality (PN 1.6) - 80 nominal bore

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class “O”) insulation on geyser and solar water pipe suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. - 19mm

Painting with synthetic enamel paint of approved drand and manufacture to give an even shade - Two more coast on new work

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete - 25 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. - as per specs

Providing and fixing in position 25 mm diam mosquito proof coupling of approved municipal design. - as per specs

Providing and fixing CPVC pipes having themal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jionting of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. - 15 mm nominal outer dia pipes

Internal work -Exposed on Wall Providing and fixing CPVC pipes having themal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jionting of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. - 20 mm nominal outer dia pipes

Internal work -Exposed on Wall Providing and fixing CPVC pipes having themal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jionting of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. - 25 mm nominal outer dia pipes

Internal work -Exposed on Wall Providing and fixing CPVC pipes having themal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jionting of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. - 32 mm nominal outer dia pipes

Internal work -Exposed on Wall Providing and fixing CPVC pipes having themal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jionting of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. - 40 mm nominal outer dia pipes

Internal work -Exposed on Wall Providing and fixing CPVC pipes having themal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jionting of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. - 50 mm nominal outer dia pipes

Internal work -Exposed on Wall Providing and fixing CPVC pipes having themal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jionting of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the wall same including testing of joints complete as per the direction of engineer incharge,concealed work including cutting chases and making good the wall etc. - 15 mm nominal outer dia pipes

Internal work -Exposed on Wall Providing and fixing CPVC pipes having themal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jionting of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the wall same including testing of joints complete as per the direction of engineer incharge,concealed work including cutting chases and making good the wall etc. - 20 mm nominal outer dia pipes

Providing and fixing G.I. pipes complete with GI fittings and clamps including cutting and making good the walls etc. (internal work) FOR ROOF LEVEL - 25 mm dia, nominal bore

Providing and fixing G.I. pipes complete with GI fittings and clamps including cutting and making good the walls etc. (internal work) FOR ROOF LEVEL - 32 mm dia, nominal bore

Providing and fixing G.I. pipes complete with GI fittings and clamps including cutting and making good the walls etc. (internal work) FOR ROOF LEVEL - 40 mm dia, nominal bore

Providing and fixing G.I. pipes complete with GI fittings and clamps including cutting and making good the walls etc. (internal work) FOR ROOF LEVEL - 50 mm dia, nominal bore

Providing and fixing G.I. pipes complete with GI fittings and clamps including cutting and making good the walls etc. (internal work) FOR ROOF LEVEL - 65 mm dia, nominal bore

Providing and fixing G.I. pipes complete with GI fittings and clamps including cutting and making good the walls etc. (internal work) FOR ROOF LEVEL - 80mm nominal bore

Providing and fixing brass stop cock of approved quality - 15mm nominal bore

Providing and fixing brass stop cock of approved quality - 20 mm nominal bore

Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) - 25mm dia, nominal bore

Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) - 32 mm dia, nominal bore

Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) - 40 mm dia, nominal bore

Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) - 50 mm dia, nominal bore

BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified - 100 nominal bore

BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified - 80 nominal bore

BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified - 65 nominal bore

Providing and fixing brass ball valve with SS 304 Stem and ball, teflon seat complete (PN-16). - 15 mm dia nominal bore

Providing and fixing brass ball valve with SS 304 Stem and ball, teflon seat complete (PN-16). - 20 mm dia nominal bore

Providing and fixing brass ball valve with SS 304 Stem and ball, teflon seat complete (PN-16). - 25 mm dia nominal bore

Providing, fixing, testing and commissioning of motorised butterfly valve of following dia for filling of overhead water tank complete with high and low level control switches to control tanks. The level controllers shall be installed in overhead tanks. The level switch will close the valve when water level is high in overhead tank and open the valve when overhead water tank level is low. The system should be complete in all respects with accessories 220 V AC / 2 V DC, IP67 electrical water level control unit, copper control wiring in whether proof casing etc. - 50 mm dia NB Float Valve

Structual steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. - as per specs

SITC of solar water heating system with heat exchanger type including electrical heater backup, make up water tank but without piping This item is hot water generation system through solar panels which fulfills the hot water requirements.

RAW WATER TREATMENT PUMP: Providing, fixing, commissioing and testing package vertical raw water pumps, comprising of Electrical Driven inline pumping with all accessories, Pumps shall be with C.I. Base, S.S 304, impeller, shaft, mechanical seal, S.S. Shaft directly coupled to motor suitable for operation on 400/440 volts, 3 phase 2900 RPM. TEFC electronic motor mounted on a common channel baseplate 150mm dia pressure gauge, GM isolation cock and cement concrete foundation with plaster with dunlop cushy foot mountings with all accessories such as NRVs, valves, pressure guage bourden type, common suction and delivery header, bellows on sucton and delivery side complete in all repsects. Pumps shall be suitable for 415 ± 10% volts 3 phase 50 Hz A.C supply & shall be having the following requirement complete with foundation and associated civil works.Suction & Delivery Header - SS 304, Control Valve On suction and Delivery - Ball Valve Only (No Butterfly Valve Accepted).Flow Prevention - Only Check Valve, Suction & delivery header including all pipes, suction & delivery sides valves, NRV, Pressure gauges & accessories complete. - Flow Rate : 2.5 LPS (1 working + 1 stand by), Head : 35 M, Min. Motor HP :2.5 H.P. (Each)

Security Guards 24 hours, Operators for all equipment and landscape, Housekeeping for 1st year

Security Guards 24 hours, Operators for all equipment and landscape, Housekeeping for 2nd year

Security Guards 24 hours, Operators for all equipment and landscape, Housekeeping for 3rd year

Security Guards 24 hours, Operators for all equipment and landscape, Housekeeping for 4th year

Security Guards 24 hours, Operators for all equipment and landscape, Housekeeping for 5th year

a s enterprise

GLOBAL CIVIL PROJECT PRIVATE LIMITED