PERIODICAL SERVICES, MAINTENANCE TO CUPBOARD, TOILETS SANITARY FITTINGS AND OTHER MISC B/R REPAIR WORKS FOR COMMAND HUTS/ CENTRAL AMENITIES, OFFRS MD ACCN AT OR NEAR MALL ROAD, POLO ROAD, CASSEL ROAD, PARADE ROAD, MANDIR MARG ETC AND OTHER CONNECTED

Amount

Demolition of Reinforced cement concrete of any description and in any position as in roof slab, platforms, counters, lintels etc incl disposal of debris to distance not exceeding 500 mtr, complete all as specified and as directed.

M & L for mild steel TMT bar 10mm dia and over cut to length, bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Description all as per item No 2 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M & L for form work to soffits of suspended slabs such as roof slabs, floor, slabs landings and stair and similar work not exc. 20 cm thick flat rough to receive plaster all as specified and directed.

M & L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete.

M & L for RCC M25 (Design Mix) (using 20mm graded agg) as in slabs, supported on walls, roof beams , landings, balconies and in shelves and the like complete all as specified and as directed.

Taking down cement or cement lime plaster , any description on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and fair incl scaffolding, mixing of water proofing compound @ 3% weight of cement etc, complete all as specified and as directed.

M & L for 15mm thick rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and fair inch scaffoldings etc., complete all as specified.

M & L for rendering 10 mm thick on concrete surfaces as in ceiling in CM 1:3, finished even and fair incl scaffolding etc., complete all as specified and as directed.

M & L for Brick work with sub class 'B' bricks of old size, straight or curved on plan to any radius built in CM 1:6 including demolition of Brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified.

Description all as per item No -11 above but in half brick wall built in CM (1:4).

M & L for preparation of new plaster external wall and ceiling surfaces of and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm./litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm complete all as specified and as directed.

M & L for Preparation of newly plastered /unplaster surfaces of walls and ceilings and applying Two coats of Oil Bound Distemper on wall surfaces over a coat of primer ,complete all as specified and directed.

M & L for preparation of plastered or unplaster or pointing old decorated/un-decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying One coat of Cement Based Paint, complete all as specified and directed.

M & L for preparation of plastered, unplaster or pointing surfaces old decorated/un-decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/ Putty and applying one coat of exterior acrylic emulsion paint of any tint all as per manufacturers instructions to achieve desired finish at 9 mtr height, complete all as directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each including iron mangory complete all as specified and as directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each including iron mangory complete all as specified and as directed.

S & F Solid PVC door frame of size 50mm x 95mm made out of wood grain printed PVC sheet used reinforced with M.S. tube, supplying & fixing in opening as per specification & drawing, complete all as specified and as directed.

S & F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front and back Face (wooden finish pattern), supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S & F framed work such as in door frame, door shutters / gate of angel or other section with gusset plates, rails, braces, etc. complete , drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings, including hings hold fast of Fe 410-W (Gde E-250 quality) etc complete all as specified.

S & F Mild steel, plain, black sheet 1.60mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

M & L 16-18 mm thick Italian marble of superior quality (Type, Size and colour as approved by GE and as per site requirement) of any type work table rubbed and polished as in steps, jambs, pillars, window cills, platforms, statue platforms and like in over and incl 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab, notching, moulding, grinding and diamond polishing after dismantling of old marble work of any type with cement mortar bedding (but not backing) complete all as specified and as directed .

S & F 100mm size stainless steel butt hinges fixing with screws to door frame, complete all as specified.

S & F Aluminium Anodised 150mm size barrel tower bolt, complete all as specified and as directed.

S & F 150mm size aluminium anodized handles, complete all as specified and as directed.

S & F 100mm size Mild steel butt hinges fixing with screws to Iron door frame, complete all as specified.

S & F Mild steel 150mm size barrel tower bolt, complete all as specified and as directed.

S & F 150mm size Mild steel handles, complete all as specified and as directed.

S&F Aluminium alloy powder coated standard hollow section for ventilators as per approved sample and as per IS specifications, shutters weighting 0.55 kg/RM, rectangular frames of section 101.6mm x 44.45mm x 3.18mm weighing not less than 2.54Kg/RM including provision of 5.5mm thick tinted glass of superior quality including SS handles, tower bolt, hinges and all standard fittings complete all as specified and as directed.

M&L for preparation of new steel surface of any description and applying two coats of synthetic enamel paint over a coat of red oxide/ primer, complete all as specified and directed.

S & F Collapsible steel shutter, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, including dismantling of existing shutter complete.

S & F 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) of size 300mmx300mm or 400mmx400mm as reqd at site in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.

M & L for glazed coloured ceramic tiles in vertical surface of size 300mmx450mm or 300mmx600mm and 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10mm thick screed bed in CM 1:4 incl dismantling of existing floor, hearth or wall tiling with cement mortar bedding (but not backing), complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level), complete all as specified and as directed.

M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement, complete all as specified and as directed.

M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of flooring or in any position including demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.

M&L for preparation of old treated steel surface of any description, filling the depressions and applying one coats of synthetic enamel paint complete all as specified and directed.

M & L for Stainless Steel work of Grade-304 as in designer vertical post/pole of any type and size (upto a height of 10 Mtrs and (100mm to 200mm dia) including special shaped washers, channels, plates horizontal/ vertical also ornamental works any type and size as approved by GE and as reqd at site made of hollow tubes or in any other shape as per requirement at site, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary nuts and bolts dash fasteners, stainless steel bolts etc., of required size on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed. (Note :- No extra payment shall be made to the contractor for ornamental works of this item).

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall / view cutter etc, fixed with self tapping screws with bent to a curve (of any radius as per required) including dismantling asbestos cement sheet in roof coverings ( corrugated , semi corrugated etc.) any gauge, thickness, including, Nainital or similar pattern roof coverings sheet in any pattern & position of roof coverings, complete all as specified and directed

Description all as per item No 43 above but plain sheet.

S&F steel work in tubular trusses,purline, doors , posts, frame works any type etc. including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240 including dismantling of existing wrought iron of any type and size, complete all as specified and directed.

M & L for Ready Mix cement concrete (RMC), 1:2:4 Type B-1 using 20mm graded stone aggregate as in Hard standing/Pathway /pothole filling/road cutting filling /Road side berm filling and similar nature of work in any position and location duly maintaining proper slope/gradient as required at site and using form work at sides where required including cutting to shape and demolition of cement concrete (unreinforced) in any position not exc. 15 cm thick (below or above ground level). (Note: 1. The flooring required of various thickness as per site condition shall be also measured and paid in Cum. 2. No extra payment shall be made for formwork used 3. Necessary vouchers of RMC from plant shall produced duly defaced by Engr-in-Charge during payment of RAR)

M & L for Machine pressed precast concrete interlocking paver block of any shape and size (Two colour combination) conforming to IS 15658-2006 of 60 mm thick, M-35 Grade laid dry in floor/path over and including 50 mm thick sand bedding layer after dismantling of old interlocking tiles /path etc. and remove from the MoD land complete all as specified and as directed.

M & L for Coloured Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement with grey cement and no pigment slurry over and incl 15mm thick screed bed in CM 1:6 etc after dismantling of existing chequered tiles of any type complete all as directed.

M & L for 20 mm thick granite (Z black colour) of any type work table rubbed and polished as in steps, jambs, pillars, window cills, cooking platforms and like in over and incl 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab, notching and moulding after demolition of existing granite, complete all as specified and as directed .

M&L for providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR or equivalent) capable of applying 15 mm average thickness in single layer and finishing with trowel with a bond coat SBR polymer @ 10% of cement weight modified cementious bond coat @ 2.2 kg cement/Sqm of surface area including taking down existing roof treatment of any type with cement plaster on brick/concrete surfaces, raking out joints, hacking for key, scrubbing down with water etc., to receive further treatment, complete all as specified and as directed. Make: Asian Paints or equivalent in Berger and Fosroc. Note : The application shall be executed on any type of surface and on horizontal/Vertical areas.

Providing and applying Smart care Damp-proof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibres having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/Sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. (Make: Smart Care Damp Proof of Asian Paints or equivalent in Berger and Nerolac). Notes:(1) The work shall be executed through authorised applicator of manufacturer only. (2) Authorised Applicator shall be approved by GE before starting of work. (3) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers. (4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.

S & F tubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.

S & F tubing 20mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

S & F in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe of 15 mm bore complete all as specified and directed.

S & F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe of 20 mm bore complete all as specified and directed.

S & F in repair 15mm bore, fancy type CP bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.(Make: Jaquar/Marc/Kohler)

S & F in repairs 15mm bore Angle valve of CP any colour high pressure screwed for iron pipe and fixed, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)

S & F in repairs PVC (SWR) Floor/Nahani trap, plain dia of outlet 125mm, with CP grating complete all as specified and as directed.

S & F in repairs 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and as directed.

S & F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S & F in repair Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to trap , and to flushing pipe anti-syphonage pipe including trap set in and including PCC (1:5:10) lean concrete etc, complete and making good to floor all as specified and directed.

S & F in repair Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) ' S' Trap / 'P" Trap, including seat cover with connection to drain and to flushing pipe anti-syphonage pipe, and making good to floor complete all as specified and directed.

S & F in repair 10 Ltrs capacity PVC valve less symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket and flush pipe etc complete all as specified and directed

S & F in repair Vitreous china wash basin counter oval type size 600x425x195mm, under any type of slab with all fitting and fixture, & (32 mm -45 gms/40mm-60 gms ) waste coupling of CP complete all as specified and as directed. (Make : Jaquar / Hind ware/Parry ware/Cera)

S&F in repair 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. complete all as specified and directed. (Make: Jaquar/Marc/Kohler)

S & F in repairs 32/40mm spring type PVC waste pipe fixed toWHB and sink (Note minimum length of each pipe should not be less than 0.80RM) complete all as specified and as directed.

S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete (Make: Jaquar/Marc/Kohler)

S & F in repairs 20mm dia Chromium plated towel rail 60cm long fixed to wall including all fittings for fixing complete all as specified and directed. (Make: Jaquar/Marc/Kohler)

S&F in repairs 75mm dia brass chromium plated shower rose with neck, CP arm of 450mm long and swivel joints fancy type suitable for 15mm bore GI pipe all as specified and directed. (Make: Jaquar/Marc/Kohler)

S & F in repairs PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, fixed in walls in repairs complete all as specified & directed.

S & F in repairs PVC (SWR) 75mm bore bends with access door, complete all as specified and directed.

S & F in repairs PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, fixed in walls in repairs complete all as specified & directed.

S & F in repairs PVC (SWR) 110mm bore bends with access door, complete all as specified and directed.

S & F in repairs 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door. Complete all as specified and as directed.

S & F in repairs 110mm bore PVC (SWR) vent cowl. Complete all as specified and as directed.

S & F for Precast RCC manhole covers 75 mm thick medium duty conforming to IS-12592, complete all as specified and as directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc or for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in soft or loose soil complete all as specified and as directed.

Removing excavated materials to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed.

Demolition and breaking up drain pipes (SGSW/ AC/RCC) including hunching and benching set in cement mortar for 150mm to 300mm dia pipe, and removal of debris from site and deposited where directed at a distance not exc 1KM from site complete all as specified and as directed.

M & L for 200 mm dia (internal dia) RCC Hume pipe class NP -2 laid and jointed complete with collars laid in trenches and tested, complete all as specified and as directed.

M& L for PCC 1:3:6 type C2 (using 40 mm grade stone aggregate) as in bed to drain pipe 200 mm bore incl forming cradles, complete all as specified and directed.

S & F in repairs 100mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or fixed to wall or in floors complete all as specified and as directed.

S & F in repairs 100mm dia Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door, complete all as specified and as directed.

S & F in repairs 100mm dia cast iron cowls complete all as specified and as directed.

M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed.

M & L for coloured glazed wall cladding tiles of size overall area exc 0.11 Sqm but not exc. 0.36 Sqm of 8-10mm thick on vertical surfaces of wall over and incl 10mm thick rendering and as per sample approved by Engr-in-charge or GE incl dismantling of existing wall tiling with cement mortar bedding (but not backing), complete all as specified and as directed.

M & L for fabrication & fixing to horizontal & vertical shelves/ partitions /sides/ top/ bottom/back sides etc. for Modular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 17/18 mm thick WPC boards with white laminated colour on both sides, of approved quality including paste to all exposed edge by edge Banding Tape including provision of cabinet for keeping baskets/ drawers etc and including taking down existing shutter/panel/partition and all other accessories in any type and any position complete all as specified and as directed. (Make :Action tesa or equivalent)

M & L for Fabrication & fixing to front side /all exposed sides of Modular kitchen cabinet/ wardrobe/ cupboard/drawers made out of 17/18 mm thick HDHMR boards with glossy/matt colour laminate sheet on front face and all exposed sides and white laminate on other face of approved quality and including paste to all exposed edge by edge Banding Tape and including provision of cabinet for keeping baskets/ drawers etc. and including taking down existing shutter/panel/partition and all other accessories in any type and any position complete all as specified and as directed. (Make : Action tesa or equivalent)

S & F for soft closure hinges with all fittings at mounting plate of premium quality, fixed in door/cup board shutters, complete all as specified and as directed (Make : - Godrej/ Hettich/ IPSA).

S & F Continuous (piano) hinges, stainless steel, width of flap 30mm complete all as specified and as directed.

S & F 150 mm size designer door handle stainless steel chromium plated for Cabinet/Wall Unit/Overhead Unit/Wardrobe etc. complete all as specified and as directed.

S & F for Magnetic catches with steel body ‘H’ type, fixed to shutter, complete all as specified.

S&F in repair Hasp and staple, safety type, stainless steel with mild steel hinge pin including bolt to hinge plate and fixed with screws

K S CONSTRUCTIONS (BID ID -3482275)

Akhil Enterprises (BID ID -3487632)

Vipul Construction (BID ID -3487948)

M/S ADHIKARI CONSTRUCTION CO. (BID ID -3482224)

MAA SANTOSHI ENTERPRISES (BID ID -3487392)

MS BUILDTECH (BID ID -3487726)

M/S GEETANJALI ENTERPRISES (BID ID -3487729)