Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.7 LAccepted-AOC KRAL PORA BAGH I MEHTAB NEAR MANCHOWA PETROL PUMP DISTRICT BUDGAM 190019 J K | BUDGAM | BUDGAM | J K | 190019 | L1 | Accepted-AOC Accepted Being L1 | |
| 2 | L2₹22.4 L+₹50,435 (2.30%)Rejected-Finance | L2 | Rejected-Finance Other than L1 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
26 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE, HQ 134 Wks Engrs
HQ 134 Wks Engrs PIN-914134 c/o 56 APO
REPAIR AND MAINT TO EXTERNAL WATER SUPPLY DISTRIBUTION SYSTEM AT KHREUH AND SHER-E-SHALI UNDER GE 861 EWS
2022_MES_533637_1
134 WE-27(T)/2022-23
Open Tender
Civil Works - Water Works
Item Rate
180 days
Srinagar
9 documents required · 9 mandatory
₹500
GE 861 EWS
₹50,000
Yes
11 Aug 2022
25 Jun 2022
28 Jul 2022
25 Jun 2022
26 Jul 2022
10 Jul 2022
26 Jun 2022 - 2 Jul 2022
60 days
Amount
Excavation in trenches not exe 1.5 mtr wide and not exe 1.5 mtr deep for foundation, laying of pipe line etc and getting out in hard/dense soil, complete all as specified and directed.
Returning, filling in including spreading, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and directed.
Removing surplus soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed.
Dismantling/taking out 200mm bore old rusted/blocked /corroded, UNSV GI/CI pipe line from trenches/floors or taking down from walls with complete fittings, complete all as specified and directed by Engr-in-Charge.
All as per Ser item No 4.00 here-in-above but 150mm bore GI/CI pipe.
All as per Ser item No 4.00 here-in-above but 100mm bore GI/CI pipe.
All as per Ser item No 4.00 here-in-above but 80mm bore GI/CI pipe.
All as per Ser item No 4.00 here-in-above but 50mm bore GI pipe.
All as per Ser item No 4.00 here-in-above but 40mm bore GI pipe.
All as per Ser item No 4.00 here-in-above but 25mm bore GI pipe.
All as per Ser item No 4.00 here-in-above but 20mm bore GI pipe.
All as per Ser item No 4.00 here-in-above but 15mm bore GI pipe.
M&L for 150mm bore GI water tubing, medium grade (ISI marked) with all fittings and fixtures as required at site, laid in trenches, complete all as specified and directed.
All as per Ser item No 13.00 here-in-above but 100mm bore pipe.
All as per Ser item No 13.00 here-in-above but 80mm bore pipe.
All as per Ser item No 13.00 here-in-above but 50mm bore pipe.
All as per Ser item No 13.00 here-in-above but 40mm bore pipe.
All as per Ser item No 13.00 here-in-above but 25mm bore pipe.
All as per Ser item No 13.00 here-in-above but 20mm bore pipe.
All as per Ser item No 13.00 here-in-above but 15mm bore pipe.
M&L for 200mm bore cast iron pipe with spigot and socket ends centrifugally cast, Class 'A' in any length, laid in trenches, complete all as specified and directed.
All as per Ser item No 21.00 here-in-above but 150mm bore pipe.
All as per Ser item No 21.00 here-in-above but 100mm bore pipe.
All as per Ser item No 21.00 here-in-above but 80mm bore pipe.
Re-fixing and laying only 200mm bore old GI water tubing or CI pipe retrieved from Ser item No 4.00 here-in-above, laid in trenches with and including fittings such as elbow, sockets, union, reducer as required at site, complete all as specified and directed by Engineer-in Charge.
All as per Ser item No 25.00 here-in-above but retrieved from ser item No 5.00 and 150mm bore GI/CI pipe.
All as per Ser item No 25.00 here-in-above but retrieved from ser item No 6.00 and 100mm bore GI/CI pipe.
All as per Ser item No 25.00 here-in-above but retrieved from ser item No 7.00 and 80mm bore GI/CI pipe.
All as per Ser item No 25.00 here-in-above but retrieved from ser item No 8.00 and 50mm bore GI pipe.
All as per Ser item No 25.00 here-in-above but retrieved from ser item No 9.00 and 40mm bore GI pipe.
All as per Ser item No 25.00 here-in-above but retrieved from ser item No 10.00 and 25mm bore GI pipe.
All as per Ser item No 25.00 here-in-above but retrieved from ser item No 11.00 and 20mm bore GI pipe.
All as per Ser item No 25.00 here-in-above but retrieved from ser item No 12.00 and 15mm bore GI pipe.
S&F in replacement 50mm bore gun metal globe or gate valve, non rising spindle, heavy duty with iron wheel head, screwed both end, complete all as specified and directed.
All as per Ser item No 34.00 here-in-above but 40mm bore.
All as per Ser item No 34.00 here-in-above but 25mm bore.
All as per Ser item No 34.00 here-in-above but 20mm bore.
All as per Ser item No 34.00 here-in-above but 15mm bore.
S&F in replacement cast iron fittings such as bend (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc), Tee pieces, caps reducer, collar and plug upto 150mm bore, complete all as specified and directed.
All as per Ser item No 39.00 here-in-above but 200mm to 300mm bore.
S&F in replacement 15mm bore size CP bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.
All as per Ser item No 41.00 here-in-above but 20mm bore size.
M&L for rectification of leakage/ breakage pipe line including cutting of existing CI water main line in any position, in trenches of any depth or above ground of size upto 200mm bore for insertion of tee/bends/collor/valve etc for taking branch connection including excavation and earth work, complete all as specified and directed . Notes:- (a) CI specials, joints and jointing material shall be measured and paid separately under relevant items of BOQ. (b) Contractor is advised to visit the site at main reservoir of capacity 50000 Gln where the work to be executed before quoting his rates.
M&L for lagging to 50mm bore pipes used in external water supply of plumbing all around with 25mm thick bonded mineral wool preformed SNAPON, pipe section of density 144 Kg/Cum conforming to IS-9842 and provide chicken wire mesh netting 25 gauge 20mm meshing and Plaster of Peris 3 to 5 mm thick all around the mesh after breaking and removing old existing lagging material, complete all as specified and directed.
All as per Ser item No 44.00 here-in-above but for 40mm bore pipe.
All as per Ser item No 44.00 here-in-above but for 25mm bore pipe.
All as per Ser item No 44.00 here-in-above but for 20mm bore pipe.
All as per Ser item No 44.00 here-in-above but for 15mm bore pipe.
S&F in replacement of water pressure gauge of Bourdon type with pressure range of 0 to 10 Kg/Sqcm on rising water main supply line including fixing arrangement, GI tubing nipple, stop cock and making holes by drilling and welding of socket of 150mm bore size, complete all as specified and directed.
M&L for opening of GI pipe, cutting and threading and fixing GI socket, union and reducing, Tee 40x15mm size for branch connection including excavation and other related work, complete all as specified and directed.
All as per Ser item No 50.00 here-in-above but size 25x15mm.
Supply only Calcium based granular disinfectant (Calcium Hypochlorite) for water treatment more stable than chlorine gas and stronger than Bleaching powder and sodium Hypochlorite, 45 Kg pack in plastic drum, complete all as specified and directed. Notes:- (i) Toxic and undesirable subtance should not induce subtances beyond acceptable limit as give in IS : 10500 (2012) in treated and desinfected water. (ii) Contractor shall be submitted original purchase vouchers/Invoices of materials to the Engr-in-Charge.
S&F in replacement 150mm bore cast iron Non-return valve, PN 1.6, ISI Marked, both end flanged, jointed and tested, complete all as specified and directed.
S&F in replacement 150mm bore brass heavy duty foot valve, ISI Marked, complete all as specified and directed.
All as per Ser item No 54.00 here-in-above but 100mm bore.
S&F in replacement gland packing 12mm dia, complete all as specified and directed.
S& F in replacement gland packing 6mm dia, complete all as specified and directed.
M&L for scraping, removing and cleaning of internal surface of under ground reservoir of capacity 25000 Gallons at 6 mtr below the ground level, cleaning with Alum water with brush after removing the mud, silt inside the reservoir till the satisfaction of Engr-in-Charge including white wash to inner and outer surface of reservoir and writing date of cleaning and capacity of tank with synthetic enamel paint of size 10cm in height on outer surface of reservoir, complete all as specified and directed by Engr-in-Charge.
All as per Ser item No. 58.00 here-in-above but capacity 50000 Gallons reservoir.
Supply, fixing, connecting and testing 200mm dia sluice valve, cast iron body, brass spindle, iron wheel head, PN 1.6 (ISI marked), including taking down old one, complete all as specified and directed.
All as per Ser item No. 60.00 here-in-above but 150mm dia.
All as per Ser item No. 60.00 here-in-above but 100mm dia.
All as per Ser item No. 60.00 here-in-above but 80mm dia.
Dismantling the electric motor, induction motor assembly of pump set/VT of capacity 30 HP to 100 HP from the foundation after disconnecting the electric connection, carrying the same to workshop, opening of electric motor and taking down worn windings of rotor, field coils and excitor coils, rewinding the stator, rotor and excitor gauge, replacement of insulation material, heat varnishing, provision of connecting leads and terminal plates etc to make the electric motor fully serviceable, re-assembling the alternator shifting back to installation, assembling the same with engine and making electric connections, testing and commissioning after servicing, complete all as specified and directed by Engineer-in-Charge.
Dismantling the complete pump set of capacity 75 HP to 100 HP from foundation channel after disconnecting all inlet and outlet connections, carrying the same to workshop, opening of pump, cleaning thoroughly and taking down worn out parts such as Ball bearing, Impeller, rubber coupling, bushes, brass ring, studs and including replacement of the same with new parts, lath work of pump shaft, impeller if required, re-assembling, commissioning and testing after servicing and fixed on it's original position and site, complete all as specified and directed by Engineer-in-Charge.
S&F fully automatic star delta (FASD) starter, oil immersed of capacity 125 HP, built in over load relay, including taking down the existing unserviceable starter, complete all as specified and directed.
Taking up and down water lubricated deep well vertical turbine pump set of capacity 75 HP of any make including ratchet assay, hollow shaft, motor, discharge head body, column pipe, steel shaft, complete all as specified and directed by Engineer-in-charge.
S&F ball bearing as per existing size and make for Centrifugal Pump/VT motor of capacity 60/75 HP, complete all as specified and directed.
M&L for repair/replacement and AMC for six month of RO + UF commercial plant of capacity 250 LPH including replacement of sediment filter 20" (every month) -2 Nos, replacement of chemical for vessels (once in 6 months) -2 Nos, replacement of RO membrane (once in a year) -1 No, service will be done every two months or on call, AMC including all electric parts, including warranty/ guarantee of two years (minimum) of electronic/electrical items such as Motor 1/2 Hp - 1 No, Dozing Pump -1 No, Pressure gauge, UV Lamp, electronic panel board and rectifying if any leakage/breakage/short circuit of vessel, multiport and panel board, panel wires, other spares and testing, complete all as specified and directed by Engr-in-Charge. Note :- Rate of spare parts (if required) to be replaced during serviceing/ AMC period shall be deemed to included in the quoted rates.
M&L for flat 3 core copper conductor PVC insulated and sheathed submersible cable of nominal area of conductor 16 Sqmm, complete all as specified and directed.
Taking out VT/submersible pump set of capacity upto 75 HP of any make from the borewell complete with column pipe and other connected parts and lowering the same in it's original position after repair/replacement of the defective parts such as pump shaft, impeller, bushes, neck ring bowl of pump, shaft coupling, studs as per requirement, complete all as specified and directed by Engr-in-Charge. Note:- Spare parts for pump will be measured and paid separately under relevent items of BOQ.
Supply only pump shaft as per existing make and model.
Supply only line shaft 5 feet long as per existing make and model.
Supply only line shaft 10 feet long as per existing make and model.
Supply only line shaft coupling as per existing make and model.
Supply only line shaft sleeve as per existing make and model.
Supply only line shaft bearing as per existing make and model.
Supply only bearing retainer as per existing make and model.
Supply only packing box bush as per existing make and model.
Supply only lantern ring as per existing make and model.
Supply only split packing gland as per existing make and model.
Supply only gland packing as per existing make and model.
Supply only head shaft as per existing make and model.
M&L for run lead joint for water supply line of cast iron pipe of 80mm bore, complete all as specified and directed.
M&L for run lead joint for water supply line of cast iron pipe of 100mm bore, complete all as specified and directed.
S&F in replacement union for 15mm bore GI pipe line, complete all as specified and directed.
All as per Ser item No 74.00 here-in-above but for 20mm bore GI pipe line.
All as per Ser item No 74.00 here-in-above but for 25mm bore GI pipe line.
All as per Ser item No 74.00 here-in-above but for 40mm bore GI pipe line.
All as per Ser item No 74.00 here-in-above but for 50mm bore GI pipe line.
S&F in replacement socket for 15mm bore GI pipe line, complete all as specified and directed.
All as per Ser item No 79.00 here-in-above but for 20mm bore GI pipe line.
All as per Ser item No 79.00 here-in-above but for 25mm bore GI pipe line.
All as per Ser item No 79.00 here-in-above but for 40mm bore GI pipe line.
All as per Ser item No 79.00 here-in-above but for 50mm bore GI pipe line.
S&F in replacement elbow for 15mm bore GI pipe line, complete all as specified and directed.
All as per Ser item No 84.00 here-in-above but for 20mm bore GI pipe line.
All as per Ser item No 84.00 here-in-above but for 25mm bore GI pipe line.
All as per Ser item No 84.00 here-in-above but for 40mm bore GI pipe line.
All as per Ser item No 84.00 here-in-above but for 50mm bore GI pipe line.
S&F in replacement Tee for 15mm bore GI pipe line, complete all as specified and directed.
All as per Ser item No 89.00 here-in-above but for 20mm bore GI pipe line.
All as per Ser item No 89.00 here-in-above but for 25mm bore GI pipe line.
S&F in replacement Nipple for 15mm bore GI pipe line, complete all as specified and directed.
All as per Ser item No 92.00 here-in-above but for 20mm bore GI pipe line.
All as per Ser item No 92.00 here-in-above but for 25mm bore GI pipe line.
S&F copper conductor lead with PVC insulated multistranded, of size 35 Sqmm single core, complete all as specified and directed.
M&L for ladder packing material of 6mm thick, complete all as specified and directed by Engr-in-Charge.
M&L for contact point made out of copper/brass (male/female), suitable upto 125 HP star delta starter, complete all as specified and directed by Engr-in-Charge.
M&L for tripping coil/relay as per existing make and model, suitable for upto 125 HP star delta starter, complete all as specified and directed by Engr-in-Charge.
M/S MOHAMMAD SHABAN AND CO
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .