Widening and Strengthening of Bargadwa Ayodhya to Banarasiya Kala Devdah road at Paisiya Naikot Adda Bazar Mogalaha Eksadwa road ODR With 5 Year Maintenance work Lot No-1 of 1

Amount

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. .As per MoRTH Specification & Clause No. 305 & Sr No. 3.16 complete in all respect as per directions of Engineer-in-charge (Including Labour Cess & GST will be paid extra as applicable)

Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment section within all lifts and lead upto 1000m. As per MoRTH Specification & Clause No. 301 & Sr No. 3.06 complete in all respect as per directions of Engineer-in-charge (Including Labour Cess & GST will be paid extra as applicable)

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2.As per MoRTH Specification & Clause No. 305 & Sr No. 3.17 complete in all respect as per directions of Engineer-in-charge (Including Labour Cess & GST will be paid extra as applicable)

Construction of granular sub-base by providing Close graded material, sperding in uniform layer with motor grader on prepared surface mixing by mix in place mathod with rotavator at OMC and compacting with vibratory power roller to achieve the desired density. As per MoRTH Specification & clause 401.(B) .Sr.No. 4.01 complete in all respect as per directions of Engineer-in-charge (Including Labour Cess & GST will be paid extra as applicable)

Wet Mix Macadam- Providing, laying, spreading and compacting stone aggregates from approved quarry to Wet Mix macadam specification including premixing the material with water at OMC in machanical mix plant,, carriage of mixed material by tipper to site laying in uniform layer with paver in sub basae/base course on well prepared surface and compacting with vibratory roller to achieve the desired density. As per MoRTH Specification & Clause No. 406A & Sr No. 4.14. complete in all respect as per directions of Engineer-in-charge (Including Labour Cess & GST will be paid extra as applicable)

Primer Coat- Providing and applying primer coat with bitumen/Emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. As per MoRTH Specification & Clause No. 502(II) & Sr No. 5.01. complete in all respect as per directions of Engineer-in-charge (Including Labour Cess & GST will be paid extra as applicable)

DBM - Providing and laying dense graded bituminous macadam with 120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder (VG-30) @ 4.50 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification & clause. No. 505 B & Sr No. 5.04. complete in all respect as per directions of Engineer-in-charge (Including Labour Cess & GST will be paid extra as applicable)

Tack Coat- Providing and applying tack coat with bitumen (VG-10) grade using pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom. As per MORTH Specification. & Clause No. 503(i) & Sr No. 5.02. complete in all respect as per directions of Engineer-in-charge (Including Labour Cess & GST will be paid extra as applicable)

BC - Bituminous Concrete Grading 2 Providing and laying bituminous concrete with higher capacity batch type hot mix plant (120TPH) using crushed aggregates of specified grading, premixed with bituminous binder (VG-30) @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification & clause No. 507B & Sr No. 5.05. complete in all respect as per directions of Engineer-in-charge (Including Labour Cess & GST will be paid extra as applicable)

Construction of sub-grade and erthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. As per MoRTH Specification & Clause No. 305 & Sr No. 3.18 (For Pateri Work). complete in all respect as per directions of Engineer-in-charge (Including Labour Cess & GST will be paid extra as applicable)

Widening of Hume Pipe Culvert (NP-3) Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. as per MoRTH specification 304 & Clause No. 9.01 Complete in all respect as per directions of Engineer-in-charge (Including Labour Cess & GST will be paid extra as applicable)

Plain cement concrete Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. Case-II PCC grade M15 using batching plant and manual placing. As per MoRTH Specification 1500, 1700 & 2100 & Clause No. 9.06 Complete in all respect as per directions of Engineer-in-charge (Including Labour Cess & GST will be paid extra as applicable)

Class 150 Sub Class ''A'' Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications. As per MoRTH Specification No. 1300 & Clause No. 12.05 Complete in all respect as per directions of Engineer-in-charge (Including Labour Cess & GST will be paid extra as applicable)

Providing & Laying of 1000 mm dia RCC Hume pipe NP-3 type including collar/Spigot & socketed type joints confirming to BIS specification as per IS. 458:2003 & as per SI No. 60D Sr. No. 9 (Including Labour Cess & GST will be paid extra as applicable) (HP Culvert)

Struck Pointing with cement mortor consisting of one part cement and two part of fine sand of 1.25 FM on brick work including supply of all material, labour and T & P etc. As per S.I.No. 574 Complete in all respect as per directions of Engineer-in-charge (Including Labour Cess & GST will be paid extra as applicable)

Maintenance of constructed road for next five year after completion of work shall be paid. as per GO No 17/2024/lk0-113/23-1-2024-23-1099-113/2023 yksd fuekZ.k foHkkx vuqHkkx&1 fnuakd 16-01-2024 ,oa dk;kZy; izeq[k vfHk;Urk ;krk;kr oxZ yks0fu0fo0 y[kuÅ dk i=kad&3689lh&vks0ih0vkj0,e0lh0@ewy&23&24 fnuakd 17-02-2024- Payment shall be done as per satisfaction of engineer in chage regarding maintenance work carried out by contractor (Including Labour Cess but GST will paid extra as applicable). 1st year Maintenance cost total construction of cost @ Zero percent & for 2nd year @ 0.25%

For 3rd year @ 0.50%

For 4th year @ 0.75%

For 5th year @ 1.00%

M/S AGRAWAL ASSOCIATE (BID ID -5779186)

M/S CHANDRAMOHAN UPADHYAY (BID ID -5778996)

M/S RESHAMI ENTERPRISES (BID ID -5780231)