SPECIAL REPAIR TO DRAINAGE AREA IN FRONT OF ESH NO 102 AND ESH NO 103 SPECIAL REPAIR TO BURING PIT NO 02 AT ATA OF 29 FAD SPECIAL REPAIR TO PATHWAY FROM COD ROAD GUARD POST TO CHILDRENS PARK AT OFFICERS MD ACCN AND 04 REV WORKS UNDER GE DEHU ROAD

Amount

Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in hard/dense soil complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers not exc 25 Cm complete all as specified and directed.

Removing excavated material exc 50 mtr and n exc 250 mtr depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft /loose soil complete all as specified and directed.

M&L for cement concrete of Type D2 1:4:8 (40 mm garded aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L PCC 1:2:4 type B2 using 40 mm agg as in fdn filling and mass concrete complete all as specified and as directed.

M & L for brick work with sub class "B" brick straight or curved on plan exceeding 6 mtr mean radius built in cm 1:6 complete all as specified and directed.

M & L for Moorum/red bajri filling in floors or paving laid in layers n.exc. 15 cm thick spread levelled and rammed including watering complete all as specified and directed.

M&L for Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/ rammed to a true surface complete all as specified and directed.

M&L for providing 100 mm thick cement concrete type C-2 , 1:3:6 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M & L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in sub base for floor complete all as specified and directed.

M&L for prividing 25 mm thick cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) as in floor finished surface even complete all as specified and directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for Glazed ceramic tiles 300mm x 200mm x 7mm to 8mm thick (square/rectangular) of approved colour on vertical surface, set and jointed in neat cement slurry and pointed with coloured cement to match the tile colour over 10mm thick rendering in CM (1:4) for wall complete all as specified and directed.

Taking down cement plaster of any description andon brick or concrete surfaces, etc including raking out joints, hacking forkey, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6,as complete all as specified and directed.

M&L rendereing 15 mm thick on other than fair faces of stone masonary sufraces in cm 1:6) finishing even and smooth without using extra cement complete all as specified and directed.

M&L rendering in two layers (10+5) 15mm thick in CM 1:4 on brick / concrete surfaces or surfacaes other than fairface of brick work with including admixture of as per manufactaure recommendation finished even and smooth complete all as specified and directed.( Note : WPC shall be measured & paid separately)

Supply only integral water proofing compound complete all as specified and directed.

M&L applying two coats of oil bound distemper over one coat of primer and putty (Approved quality) including preparation of newly plastered surfaces of walls complete all as specified and as directed.

M&L two coats of cement base paint on wall surfaces with preparation of new surfaces over of alkali resistant primer complete all as specified and as directed.

S & F for vitreous china wash basin flat back of size 550x400mm pedestal pattern incl brackets, cutting for and pinning in ends or brackets, but excluding taps, waste, chain and plug and porcelain stopper complete all as specified and as directed.

S&F 32mm bore PVC waste pipe 60cm long for sink and wash basin complete all as specified and as directed.

M&L for 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

M&L for Cast Iron floor trap 75 mm out let, with grating including joning to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S&F 15 mm Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S & F Grating of size 100 mm dia of PTMT. (Mimimum weight 25 gms) complete all as specified and as directed.

S &F 15 mm dia stop valves cast copper alloy fancy type chromium plated, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and as directed.

S & F of steel tubing medium grade galvanized with all fittings and fixtures fixed to wall ceiling or laid on floor for 15mm dia complete all as specified and as directed.

S & F of steel tubing medium grade galvanized with all fittings and fixtures fixed to wall ceiling or laid on floor for 20 mm dia complete all as specified and as directed.

M&L for rotational moulded polyethylene water storage tanks 500 Ltr capacity (cylinderical vertical with closed top)hoisted and fixed in position all as specified in SSR Part 1 complete all as specified and as directed.

S & F Gun-metal, globe or gate valves 20 mm bore, with iron wheel head, screwed both ends for iron pire complete all as specified and as directed.

S & F PVC Ball valve high pressure with polyethylene float and fly nut complete screwed for iron pipe 20 mm bore complete all as specified and as directed.

Excavating in post holes (or similar holes) each n. exc 0.50cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface in hard/dense soilcomplete all as specified and as directed.

M/L Cement concrete 1:3:6 using 40 mm graded stone aggregate as in Pillars, boundary pillars and posts (including caps and bases) etc all as specified and as directed

S&F framed work such as grills, grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; walk ways railing; frame work of water tanks and similar work conforming to Fe.290 Gde E-165 complete all as specified

M&L for painting to steel surface with two coats of synthetic anamel paint with red oxide including preparation of new surfaces etc complete all as specified and as directed.

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares exc 0.5 sq. m in each pane complete all as specified and as directed.

S & F 0.5mm thick corrugated pre painted / coloured galvalume sheet in roofing fixing all as per manufactures instructions with all fittings and accessories etc complete all as specified and as directed..

S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling complete all as specified and as directed.

M&L 9mm th Acoustical board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid complete all as specified and as directed.

S & F hangers 6 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long complete all as specied and as directed.

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and shown on drg in SSR Part-II 2004 complete all as specified and as directed.

S&F, "Rajshri" brand factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and shown on drawing in SSR Part-II (2004) complete all as specified and as directed.

S/F Aluminium door handle 125mm size cast type complete all as specified and as directed.

S & F tower bolt 200 mm long aluminum anodized of extruded section complete all as specified and as directed.

S & F butt hinges MS medium weight 100mm long complete all as specified and as directed.

S&F 250 mm aluminium alloy, anodised, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

M & L for Hume Pipe septic Tank 25 User with excavation & earth work required complete all as specified and as directed.

Soakage Pit for 1.5m dia & 1.5 m depth including excavation in hard soil/Soft rock Fdn in PCC 1:3:6 brick/Block complete all as specified and as directed.

M&L for PCC ( 1:4:8) type D2 (using 40 mm graded stone aggregate ) as in bed to drain pipes, incl packing under & hauching against the sides of pipes after they are laid and tested for 150 mm bore RCC Pipe complete all as specified and as directed.

M&L for reinforced cement concrete pipes class NP - 2, laid in trenches & jointed complete with collars, dia of pipe 150mm complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (20 mm graded stone aggregate in coping benching etc slightly rounded or chamfered complete all as specified and as directed.

M&L for pre cast cement concret cover slabs of PCC 1:2:4 Type B-1 set & jointed in CM 1:6 (Reinforcement shall be measured & paid separately) complete all as specified and as directed.

M&L for TMTbars 6 to 8mm dia cut to length, bent to shape required incl cranking,bending, hooking ends & binding with & incl mild steel wire (annealed ) not less than 0.9 mm dia. complete all as specified and as directed.

Rolled sections equal angle as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.

M&L for MS Plates (plain or chequrred) channels,square cut, notched chamfer or square cut or notched (ordinary and counter sunk) forming holes with riveted, bolted or welded attachment with MS Gde Fe 410-0 complete all as specifid and as directed.

Demolition of brick/stone masonry built in cement mortar including all quoins, arches, pillars etc., complete all as specified and as directed.

Dismanteling MS works of any desc. not otherwise provided for complete all as specified.

M&L for expanded metal, n.exc 4kg kper sqm, cut to length, bent to shape required and typing with and including annealed mild steeel wire not less than 0.9mm dai or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and as directed.

M&L cement concrete type B-1, 1:2:4 (20mm graded agg) 75mm thickness complete all as specified and as directed

M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone agg.) as in plinth protection 75 mm thick finished top surface even and smooth with out using extra cement complete all as specified.

Taking out existing water proofing treatment including cement plaster(any no of layers) on roof surfaces, cleaning the surfaces cleaning the surfaces and removing the debris outside MOD land.

M&L for rendering 10mm thick in CM 1:4 on concrete surfaces / slabs with admixture of incl admixature of as per manufacture recommendation (WPC to be measured seperately) finished even and smooth.

M&L for water proofing treatment using polymerised membrane to roof slab. Water proofing treatment shall be as under:- (a) Applying cold bitumenous oil based primer IS No 3383 @ 250 Gms/Sqm and laying APP Modified membrane with non woven polymer reinforcement / mat core (Centre core) not less than 3 mm thick and not less than 3.60kg/sqm the overlap shall be 100 mm on length side and 100 mm on width side and all as per manufacturer instruction complete.The roof surface shall be thoroughly wire brushed, washed, dried up & cleaned to remove all foreign materials & dust to receive primer.Top surface shall be applied with 0.15 Kg/Sqm bitumenous aluminium 2 coats of paint complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings exc 15cm thickness (below or above ground level) complete all as specified.

Dismantling of old tiles etc complete all as specified.

Disposal of demolished qty of concrete upto 500mtr complete all as specified.

M&L PCC type D2 (1:4:8 ( 40mm graded aggregate) 75mm thick as in sub base complete all as specified and as directed.

M&L for laying machine pressed precast concrete interlocking coloured pavers block any shape and size confirming to IS 15658-2006 of 60mm thick, M-35 Grade over 25mm thick sand layer watering and ramming complete all as specified and as directed.

M&L for Precast cement concrete solid block masonry exc 10cm in width and set in CM(1:6) Mix 1:3:6 , Type C-1 complete all as specified and as directed.

M&L For cement concrete 1:2:4 type B1(using 20 mm graded sytone agregate) in coping including necessary from work complete all as specified and as directed.

M&L For plain cement 1:2:4 type B2(usig 40mm graded stone agregate)as in Cement concrete in surface channels and drains complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stoped ends etc. complete all as specified and as directed.

M&L for Cement concrete,1:2:4, type B- 2(40mm graded aggregate) 80 mm thick floor at sides of pavement,complete all as specified and as directed.

S Y Itkar Construction and Company

DR J S CHADHA AND SONS

M/S B.A. GAIKWAD

H S TAKHI