Loading…
Loading…
Tender Value
₹18 L
EMD Value
₹36,000
Closing Date
17 Jun 2026, 6:00 pm5d left
Executive Engineer PWD RandB PROJECT DIVISION III
Office of the PWD RandB PROJECT DIVISION III JAMMU
Repair/Renovation of room number 2/21, G/22, 4/28, 3/22, 3/15 at mini building and room number 3/34, basement 10 and 14 ,1/9 ,2/30, B/14, G/25, G/16, and 1/8 at Main building Civil Secretariat Jammu. CNO-75 NP
2026_PWDJK_312184_6
Short e-NIT No. 20 of 2026-2027 Dated 11-06-2026
Open Tender
Civil Works
60 days
JAMMU
Please refer Tender documents.
2 documents required · 2 mandatory
₹600
Executive Engineer PWD RandB PROJECT DIVISION III
₹36,000
Office of the PWD RandB PROJECT DIVISION III JAMMU
11 Jun 2026
11 Jun 2026
18 Jun 2026
11 Jun 2026
17 Jun 2026
11 Jun 2026
15 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : Of area of 3 sqm. and below | - | each | 285.25 | - |
| 2 | Demolishing cement concrete manually/by mechanical means including
disposal of material within 50 meters lead as per direction of Engineer-in
charge:
15.2.1 1:3:6 or richer mix (i/c equivalent design mix) | 1 | cum | 1,725.2 | ₹1,723.47 |
| 3 | Dismantling old plaster or skirting, raking out joints and cleaning the
surface for plaster including disposal of rubbish to the dumping ground
within 50 meters lead. | 1 | sqm | 38.9 | ₹38.86 |
| 4 | 12mm Cement plaster of mix:
13.1.1 1 : 4 ( 1 cement : 4 fine sand) | - | sqm | 283.8 | - |
| 5 | Providing and laying in position cement concrete of specified grade including curing but
excluding the cost of centring and shuttering. All work upto plinth level with:
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) | 1 | cum | 6,540.45 | ₹6,533.91 |
| 6 | Providing and laying in position cement concrete of specified grade including curing but
excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | - | cum | 6,591.25 | - |
| 7 | Providing and laying water proofing treatment on roofs of slabs by
applying cement slurry mixed with water proofing cement compound
consisting of applying :
(a) after surface preparation, first layer of slurry of cement @ 0.488
kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm.
(b) laying second layer of Fibre glass cloth when the first layer is still
green. Overlaps of joints of fibre cloth should not be less than 10 cm.
(c) third layer of 1.5 mm thickness consisting of slurry of cement @
1.289 kg/sqm mixed with water proofing cement compound @ 0.670
kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air
cure for 4 hours followed by water curing for 48 hours.
The entire treatment will be taken upto 30cm on parapet wall and tucked
into groove in parapet all around.
(d) fourth and final layer of brick tiling with cement mortar (which will
be paid for separately)
For the purpose of measurement the entire treated surface will be
measured. | 1 | sqm | 556.2 | ₹555.64 |
| 8 | "Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screw 35 mm " | - | sqm | 2,078.2 | - |
| 9 | "Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screw 30 mm " | - | sqm | 2,014 | - |
| 10 | Providing and fixing aluminium work in doors, windows, ventilators, partitions with standard tubular section with dash fastener of required dia and shape and size jointed mechanically including ACP sheet/5mm thick /plain glass/ frosted glass/ laminated board panel complete with hardware fittings, powder coated aluminium, minimum thickness of powder coated 50 micron and conforming to IS 733 & IS 1285 (16 guage) complete job.LMR | 1 | sft | 400 | ₹399.6 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.59 MB
BOQ_1010593.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid