SPL REPAIR (E AND M) TO BLDG NO T-333, T-48, T-25 AND EXTERNAL ELECTRIFICATION AT 221 TRANSIT CAMP AND PROVN OF SOLAR LIGHT FOR SUP POINT AT POST-09 UNDER GE 873 EWS

Amount

Taking down carefully damaged copper/aluminum point wiring (light/fan/socket or power) complete including fixture and fittings such as switches, ceiling roses, cassing & capping, pendants, sockets, light fitting etc and making good disturbed surfaces of wall/roof complete all as specified and directed.

Taking down of MCB DB/TPN 16 & 8 way including MCB SP/SPN and making good of wall complete all as specified and directed by the Engineer–in–Charge.

M&L Point wiring with 1.5 Sqmm (nominal area) copper conductor FRLSH cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and caping of suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board/gang box of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.Make: Havells/Polycab/Grandlay.

(a) One light point controlled by one 5 Amps one way switch

(b) One 3 pin socket outlet 5 Amps on independent board

(c) One 3 pin socket outlet 5 Amps on same board

M&L point wiring for power point with 4.0 sqmm (nominal area) copper conductor FRLS cable ( multi-stranded) PVC insulated and unsheathed cable conductor 1100 Volts drawn through PVC casing capping of suitable size(as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 2.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board/gang box of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.Make: Havells/Polycab/Grandlay.

S&F Switch piano flush button single pole one way 5 Amps, 240 Volts complete all as specfied and directed by engineer-in-charge. Make: Havells/Anchor/Legrand

S&F socket outlet 2–in–1, 3pin, 6A (multipurpose) suitable for 3 pin/5 pin plug flush type complete all as specfied and directed by engineer-in-charge. Make: Havells/Anchor/Legrand

S&F switch socket combination 3 pin, 5 Amps, 2–in1, flush type (multipurpose) 2 pin /3 pin plug complete all as specfied and directed by engineer-in-charge. Make: Havells/Anchor/Legrand

S&F switch socket combination 2–in–1, 3 pin, 5/15 Amps, flush type (multipurpose) complete all as specfied and directed by engineer-in-charge. Make: Havells/Anchor/Legrand

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specfied and directed by engineer-in-charge. Make: Havells/Anchor/Legrand

Supply and fixing Rechargeable LED Bulb 9 W ,220 V, white color all as specified and as directed.Make:- Philips/Crompton/Havells

S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 22W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed. Make- Havells/CG/Philips

S&F Ceiling rose surface backelite ISI marked with 3 terminal including connecting and testing complete all as specified and directed.

S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 16 way complete all as specified and directed. Make-Legrand/L&T/ABB

S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed. Make-Legrand/L&T/ABB

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed.Make- Make-Legrand/L&T/ABB

Supply and fixing MCB SPN 240V, 10KA 'C' curve (40-63) Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed. Make-Legrand/L&T/ABB

Supply & Fixing LED light fitting 1X10W bulkhead luminaires including LED light and driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed. Make- Havells/CG/Philips

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed.

M & L for GI Pipe (medium grade,ISI Marked) 32 mm dia ,1.5 mtr long ,bend to shape for street light fitting bracket ,with 2x pairs of MS clamps of suitable length of size 40x5 mm of MS flat iron with nuts bolts and washer complete all as Specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete making all necessary connection with suitable capacity of 3 core circular cable complete all as specified and directed. Make-Havells/CG/Philips

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm. Make- Havells/Bajaj/Crompton all as specified and directed.

S&S 5 Star rated Engery Efficient Electric Geyser Vertical Type Copper 25 Liters storage capacity with Thermostat, Pressure release and all other safety features as per BIS and duly provided with Inlet Outlet crome plated steel connectin, brass stop cocks, grouting with cement on the wall and provided with 4.00 Sqmm copper wiring and 15 Amp Switch Socket incl connection to earth. Make-Havells/Bajaj/Philips

Taking up the existing cables from trenches of ant sizes all as specified and directed.

Supply, laying,fixing, passing through pipe or laid in tranches and testing underground XLPE Insulated heavy duty electric cable with aluminium conductor 1100 Volts grade cross section area 70 Sqmm 3.5 Core complete all as specified and directed. Make: Havells/Polycab/Grandlay

Supply, laying,fixing, passing through pipe or laid in tranches and testing underground XLPE Insulated heavy duty electric cable with aluminium conductor 1100 Volts grade cross section area 50 Sqmm 3.5 Core complete all as specified and directed. Make: Havells/Polycab/Grandlay

Supply, laying,fixing, passing through pipe or laid in tranches and testing underground XLPE Insulated heavy duty electric cable with aluminium conductor 1100 Volts grade cross section area 35 Sqmm 3.5 Core complete all as specified and directed. Make: Havells/Polycab/Grandlay

Supply, laying,fixing, passing through pipe or laid in tranches and testing underground XLPE Insulated heavy duty electric cable with aluminium conductor 1100 Volts grade cross section area 25 Sqmm 3.5 Core complete all as specified and directed. Make: Havells/Polycab/Grandlay

Supply, laying,fixing, passing through pipe or laid in tranches and testing underground XLPE Insulated heavy duty electric cable with aluminium conductor 1100 Volts grade cross section area 16 Sqmm 2 Core complete all as specified and directed. Make : Havells/Polycab/ KEI

Supply, laying,fixing, passing through pipe or laid in tranches and testing underground XLPE Insulated heavy duty electric cable with aluminium conductor 1100 Volts grade cross section area 10 Sqmm 2 Core complete all as specified and directed. Make: Havells/Polycab/Grandlay

Excavation in trenches not exceeding 1.5 mtr deep for laying of cables for fixing of stay,etc 10 Sqm on plan and n.exc 1.5 in depth and getting out in hard/dance soil complete all as specified and directed by Engineer-in-Charge.

Returning, filling in including spreading, leveling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested, poles, stays , struts have been erected and tested , all as specified and directed by Engineer-in-Charge.

Removing excavated soil to a distance n. exc 50 m and depositing where directed at a level n. exc 1.5 m above starting point Completed all as specified and diercted by Engineer-in-Charge.

Sand cushioning to under ground cables provided with layers of sand 8cm thick before laying the cable and 15cm thick after laying and streching the cable all as specified and directed by Engineer-in-Charge.

M&L Un-reinforced precast factory made concreate cable covers, class LV type-I, with flat size 250X150x40 mm Complete all as specified and directed by Engineer-in-Charge.

Supply and laying /fixing, GI pipe medium grade 40 mm bore including all type fittings fixed on walls/to poles with clamps /laid in trenches as cable protection all as specified and directed.

Supply, Install Testing & Commissioning of self supporting totally enclosed double door at front, LT feeder piller compartmentalised design, dust and varmin proof of size 600 mm (Height) x 500 mm (Length) x 400 mm (Width) suitable for 440 Volt 3 phase 4 wire system made out of 3.15 mm thick CRCA sheet and built upon regid frame work having front and rear hinged doors with neoprence Rubber gasket, cable glands Contractor may produce the drg of LT Panel before inspection of the work as per CPRI approved including danger plate, earthing strip point and, ventilation louvers at the rear side, bottom detachable gland plate complete with suitable size of Zinc/Cromium plated and nuts, bolts ;and washers etc. The pannel shall be synthetic enamelled painted and the control circuit diagram shall be with colour code solid conductor copper 1.5 sqmm cable for easy identification including incomming/outgoing cable holes at the bottom, complete after taking down the old unserviceable one. The Panel shall be emmbeded with 75 x 6 mm MS Angle Iron frame and to be grouted with PCC foundation (1:2:4) type B2 upto a height of 50 cm from normal ground level complete all as specified, directed and comprising of the following.

Items No 39 Contd-/ (a) Aluminium bus bar 200 amps - 04 Nos (20mmx10mm), supported with suitable size of heavy duty porcelin stand lock with suitable size of brass nut, bolts and washer with heat shrinkable PVC sleeving. The bar shall be colour coded (red, yellow and blue) for three phases and black for neutral. (b) MCB of SPN 63 amps, 10 KA, with breaking capacity of 25 KA, (Make: L & T/Havells) - 01 No (c) MCB of SP 06 to 32 A, 10 KA (Make: L & T/Havells) - 02 No INDICATING DEVICES (a) LED Indicating lamps for Main Supply indicating R', Y' B' - 01 Set of 3 (b) Digital Voltmeter (Make AE/L&T) - 01 No (c) Current Transformer having Ratio 400/5, 15 VA - 01 Set of 3 (d) Digital Ammeter ( Make(AE/L&T) - 01 No

Supply, Install Testing & Commissioning of self supporting totally enclosed double door at front, LT feeder piller compartmentalised design, dust and varmin proof of size 600 mm (Height) x 500 mm (Length) x 400 mm (Width) suitable for 440 Volt 3 phase 4 wire system made out of 3.15 mm thick CRCA sheet and built upon regid frame work having front and rear hinged doors with neoprence rubber gasket including danger plate, earthing strip point and, ventilation louvers at the rear side, bottom detachable gland plate complete with suitable size of Zinc/Cromium plated and nuts, bolts ;and washers etc. The pannel shall be synthetic enamelled painted and the control circuit diagram shall be with colour code solid conductor copper 1.5 sqmm cable for easy identification including incomming/outgoing cable holes at the bottom, complete after taking down the old unserviceable one. The Panel shall be emmbeded with 75 x 6 mm MS Angle Iron frame and to be grouted with PCC foundation (1:2:4) type B2 upto a height of 50 cm from normal ground level complete all as specified, directed and comprising of the following.

Items No 41 Contd-/ (a) Aluminium bus bar 200 amps - 04 Nos (20mmx10mm), supported with suitable size of heavy duty porcelin stand lock with suitable size of brass nut, bolts and washer with heat shrinkable PVC sleeving. The bar shall be colour coded (red, yellow and blue) for three phases and black for neutral. (b) MCCB, 4P, 100 A, 25 KA , (Make: L & T/Havells/Schneidr) - 01 No (c) MCB of TPN, 40A, 10 KA (Make: L & T/Havells/Schneidr) - 04 No INDICATING DEVICES (a) LED Indicating lamps for Main Supply indicating R', Y' B' - 01 Set(Each set comprising of 3 RYN lights) (b) Digital Voltmeter (Make AE/L&T) - 01 No (c) Current Transformer having Ratio 400/5, 15 VA - 01 Set of 3 (d) Digital Ammeter ( Make(AE/L&T) - 01 No

Supply, Install Testing & Commissioning of self supporting totally enclosed double door at front, LT feeder piller compartmentalised design, dust and varmin proof of size 1000 mm (Height) x 800 mm (Length) x 600 mm (Width) suitable for 440 Volt 3 phase 4 wire system made out of 3.15 mm thick CRCA sheet and built upon regid frame work having front and rear hinged doors with neoprence rubber gasket including danger plate, earthing strip point and, ventilation louvers at the rear side, bottom detachable gland plate complete with suitable size of Zinc/Cromium plated and nuts, bolts and washers etc. The pannel shall be synthetic enamelled painted and the control circuit diagram shall be with colour code solid conductor copper 1.5 sqmm cable for easy identification including incomming/outgoing cable holes at the bottom, complete after taking down the old unserviceable one. The Panel shall be emmbeded with 45mmx45mmx6mm MS Angle Iron frame and to be grouted with PCC foundation (1:2:4) type B2 150mm of MS angle shall be inside PCC and rest 450mm shall be above ground level, PCC shall be deemed to e incl in the rates, Drwgs shall be submitted to the accepting officer for approvl, complete all as specified and directed by Engineer-in-charge and comprising of the following:-

Items No 43 Contd-/ (a) Aluminium bus bar 200 amps - 04 Nos (30mmx10mm), supported with suitable size of heavy duty porcelin stand lock with suitable size of brass nut, bolts and washer with heat shrinkable PVC sleeving. The bar shall be colour coded (red, yellow and blue) for three phases and black for neutral. (b) MCCB, TPN, 250 A, 35 KA , with breaking capacity of 25 KA (Make: L & T/Havells) - 01 No (c) MCCB of TPN, 63A 16 KA (Make: L & T/Havells) - 04 No (d) Change over switch 250A= 01 No INDICATING DEVICES (a) LED Indicating lamps for Main Supply indicating R', Y' B' - 01 Set of 03 (b) Digital Voltmeter (Make AE/L&T) - 01 No (c) Current Transformer having Ratio 400/5, 15 VA - 01 Set of 3 (d) Digital Ammeter ( Make(AE/L&T) - 01 No

M & L PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified and directed.

M & L PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified and directed.

M & L PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified and directed.

Supply and fixing LED 30 W ALL-IN- ONE Solar Street Light is Made in India with High Efficiency Monoi Crystalline Solar PV Module ,Lithum Ferro Phosphate Battery with in-built BMS Technology, High Efficiency LED ,MPPT Solar Charge Controller and Aluminium Extruded Body. ALL- IN -ONE SSL is specially designed with PIR Motion Sensor Automatically control the dimming and brightness of light, Which increase the BackTime. Include steel tubular swaged poles complete with cast iron base plate, final taper plug, bolts, nuts and screws as specified type 410 SP-31 (6.00 Mtr long)and Include Bracket made out of GI tubing 25mm dia,light grade 1.5 mtr long including fixing with MS clamps 2 Nos made out of 25 mm wide 3mm thick flat iron with M.S nuts bolts 75 mm long 12 mm dia 4 Nos with flat washer (3mm thick) Notes:- Excavation, Earthwork, PCC and Removal of soil shall be measured and paid separately.( Make-Havells/Philips/Crompton)

Deduct Schedule of Credit of Rs (-)74,119/-/- (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.

M/S HONY CAPT RIGZIN SAMPHEL (BID ID -3395191)

M/S Chib Engineers (BID ID -3392825)