PROVISION OF JAFRI WALL AND CHAIN LINK FENCING AT OMQ AREA AT VSN NAGPUR

Amount

Excavating in hard/ dense soil in trenches, n. exc. 1.5m wide and n. exc. 1.5m in depth ; for foundation, etc. or for shafts , wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n. exc. 1.5 in depth and getting out as specified and as directed.

M&L cement concrete in foundations, filling and mass concrete (PCC) Type D2 1:4:8 (40mm graded aggregate) etc complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and directed

Removing excavated material n. exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point all as specified and directed

M&L for brickwork with flyash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 all as specified and directed

M&L rendering 15mm th in CM 1:4 finished even and smooth without using extra cement all as specified and directed

M&L for applying two coats of cement based paint over over a coat of alkali resistant primer over newly plastered wall surfaces after necessary preparation all as specified and as directed.

M&L for two coat of exterior emulsion paint of white or Air Force blue colour or equivalent colour as approved by GE , using ultra clean paint or Dulax ICI or Apex Ultima of Asian Paints or equivalent in Berger Paints over wall surfaces , edges of slab, roof/ chajja projection and column etc. after necessary preparation all as specified and as directed

M&L for providing cement concrete Type B1 1:2:4 (20mm graded aggregate) in copings all as specified and as directed

M&L for providing precast cement concrete Type B0 1:2:4 (12.5mm graded aggregate) louvres and jallies, 40mm thick (measured solid) including all mouldings but excluding frame (Pre cast frame shall be measured separately) all as specified and directed

M&L for RCC 1:2:4 Type B1 (12.5mm graded aggregate in beams, cantilevers, bressumers, lintels over 1.5m span all as specified and as directed

M&L for mild steel TMT bars 10mm dia cut to length bent to shape required including cranking, bending and binding with MS wire (annealed) not less than 0.9mm dia all as specified and as directed

All as per item No 12 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as specified and directed

Excavating in post holes each n. exc. 0.5cum getting out in hard/ dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good surface all as specified and as directed

M&L for cement concrete Type C2 1:3:6 (40mm graded aggregate) in foundations, filling and mass concrete all as specified and directed

S&F mild steel framed work as in post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, flat iron fillets (for securing wiremesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 all as specified and directed

S&F mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other end, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long, and having neck 5-10 mm dia all as specified and directed

M&L preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed

Supply only chain link mild steel galvanized any type all as specified and directed

Fixing only chain link fencing including line wires any mesh size and type to any type of standards, rails, straining bolts etc. including provision of binding wire all as specified and directed

M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc all as specified and directed

S D WAGHAMSHI

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani

Meet Road Lines

raghuveer constructions

M/s Prakash R. Verma

Vishwakarma Engineering Works

M/s B S Jain

M/s Earth Technology and Construction

Rajveer Infrastucture

dhanshree enterprises

M/S Darshan Singh Plaha