REPAIR TO GRIT PLASTER, CHAJJA, BRICK WORKS, PLASTER AND CERTAIN CONNECTED REPAIR WORKS IN WAC LINE UNDER AGE B/R-I OF GE (W) AGRA

Amount

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed by Engr-in-Charge.

M & L cutting holes into or through brick wall built in cement mortar superfacial area not exc 150 Sq cm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed by Engr-in-Charge.

S&F mild steel joist channel angle or tee sections fixed independently with out connecting plates etcof grade fe-410-0 & fe 310-0 complete all as specified and directed by Engr-in-Charge.

S&F 5.0 cm thick sand stone slabs in sun shades, chajjas, shelves, roof slabs etc n.exc. 2m in length punched dressed on face and along exposed edges, self faced on other side and set and pointed in CM 1:4 complete all as specified and directed by Engr-in-Charge.

Cutting the roots of trees from the brick walls / stone wall made in cement mortar, exc. half and not exc one brick thick wall and making good the disturbed surfaces complete all as specified and directed by Engr-in-Charge.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and pre-cast concrete articles complete all as specified and directed by Engr-in-Charge.

M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed but except brick. Note:- Bricks obtained from item No 1 shall be reused after cleaning.

M&L for rendering 15mm thick plastering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick plastering in CM 1:4 on brick or concrete surface with water proofing compound as per manufacturers instrns and finishing the surface even and fair complete all as specified and directed by Engr-in-Charge. Note : Water proofing compound will be measured and paid seperately under respective item of Sch ‘A’.

M & L for rendering 10mm thick in CM 1:3 on ceiling surface finished even and fair complete all as specified and directed by Engr-in-Charge.

Supply only integral water proofing compound complete all as specified and directed by Engr-in-Charge.

M&L for applying three coats of white wash on ceiling including preparation of new plastered surfaces, complete all as specified and directed by Engr-in-Charge.

M&L for applying two coats of cement base paint over a coat of alkali resistant priming paint on wall including preparation of new plastered surfaces, complete all as specified and directed by Engr-in-Charge.

M&L for applying three coats of white wash on wall including preparation of plastered surfaces of walls, complete all as specified and directed by Engr-in-Charge.

M&L for two coats of weather proof paint on new plastered surface over a coat of primer in different tint as in band/strips or in narrow width and similer works including prepration of surface ccomplete all as specified and directed by Engr-in-Charge.

Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.

M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) ( colour of stone as directed by Engr -in-charge) . in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately)

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove with coloured cement to match complete as per specifications and direction of the Engineer-in-charge

Demolition of cement concrete (unreinforced) in any position n.exc 15cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.

M&L for Cement concrete 1:2:4 type B-1 ( using 20mm graded crushed stone aggregate) as in steps, parapets & railings upto 60cm ht, benching,coping, roof kerbs, mud stop, roof padding, rain water pipe mouth etc and similar work complete all as specified and directed by Engr-in-Charge.

Taking up or down 15mm bore steel tubing and connection complete all as specified and directed by Engr-in-Charge.

All as per item No 22 above but 20mm bore

S&F 15mm bore steel water tubing, medium grade, galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed by Engr-in-Charge.

S&F 20mm bore steel water tubing medium grade galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed by Engr-in-Charge.

S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed by Engr-in-Charge.

S & F in repair 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed by Engr-in-Charge.

S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed by Engr-in-Charge.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed by Engr-in-Charge.

M&L for removal of 75mm bore PVC (SWR) pipes/fittingsfrom walls and refixing to the walls and join to bends/sockets including necessary clamps and adhesives complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete 75 mm thick type B-2 , 1:2:4 mix (40 mm graded agg) in Hard standing or in similar work complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed by Engr-in-Charge. .

S & F Aluminium anodised powder coated window with sliding three (03) track sliding shutters and 5 mm thick sheet glass including deco grill DG 102 using aluminium section as per Jindal sec no 20617, box sec as per Jindal sec no 20028, top sec as per Jindal sec no 20831, side sec as per Jindal sec no 20831, plain sec as per Jindal sec no 20737, wheel sec as per Jindal sec no 20736, interlock sec as per Jindal sec no 20737, U channel, I angle, clips sec as per Jindal sec no 19306 and stain less steel wire cloth netting ( 0.63 mm nominal dia) and average width of aperture 1.40 mm ) including necessary joining clips, glasing clips, handles, locking arrangements etc complete. Make: ( JINDAL or equalent sections from HINDALCO/INDALCO/NALCO )

S & F Anodised aluminium ventilator frame/shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed by Engr-in-Charge.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge.

S&F 6 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed by Engr-in-Charge.

M/s Rahul Kumar Agrawal (BID ID -3083536)

Tulsi Enterprises (BID ID -3084840)

SHRI RADHAYSHYAM JHA (BID ID -3085193)

M/S A A DRILL EXPERT (BID ID -3093570)

Attar Singh and Sons (BID ID -3095954)

M/s S. K. Construction Co. (BID ID -3096665)

aman construction & general suppliers (BID ID -3091721)

Allied Builders (BID ID -3085547)

N.K. ENTERPRISES (BID ID -3087081)

M/s United Engineers (BID ID -3082431)