Construction of Community hall in Bani Oni slum at Hubli City.

Construction of Community hall in Bani Oni slum at Hubli City.

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For Foundation form works consider 8%. ---- With all Lead ...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For RCC Columns / Shaft (Slip Centering) 70%. ---- With al...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For Plinth beam form works consider 50%. ---- With all Lea...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granit...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For Column form works consider 70%. ---- With all Lead and...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For RCC Beam,Lintels form works consider 60%. ---- With al...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. Chejjas, Canopy & Other Architectural projections of minor ...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For RCC Roof Slabs form works consider 50%. ---- With all ...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For Staircase and other similar works form works consider...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. Earth retaining structures form works consider 10%. ---- W...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyi...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) ...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, ...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and remov...

Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup ...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m over and including priming coat of exterior primer applied @ 2.20 kg/10 m) with paint of a...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m over and including one coat of S...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Providing fixing of 2track x 2panel sliding windows made out of multi chambered UPVCMatching to RAL9016 sections and with minimum TiO2Titanium Dioxide at 6 PHR with TPE Thermo Plastic Elastomer and l...

Providing fixing of louvered ventilator made out of multi chambered UPVCMatching to RAL9016 sections and with minimum TiO2Titanium Dioxide at 6PHR with TPEThermo Plastic Elastomer and lead free with ...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall b...

Providing and fixing door latch with necessary screws etc complete. Oxidised mild steel door latch ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125mm ---- With all Lead and Lift Loading and unloading as per the direction of engin...

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitti...

Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 13 1 cement3 coarse sand jointed with Adhesivecement slurry over rough plaster surface excl...

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expan...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing brass bib cock of approved quality : 20 mm nominal bore. ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Providing and fixing brass stop cock of approved quality : 20 mm nominal bore. ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore. ---- With all Lead and Lift Loading and unloading as per the dire...

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :25 mm nominal bore. ---- With all Lead and Lift Loading and unloading as per the direction of enginee...

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :32 mm nominal bore. ---- With all Lead and Lift Loading and unloading as per the direction of enginee...

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore. ---- With all Lead and Lift Loading and unloading as per the direction of engine...

Providing and fixing unplasticised PVC connection pipe with brass unions 45 cm length: 20 mm nominal bore. ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cl...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings . This includes jointing of pipes & fittings with one step...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I...

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standar...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval sha...

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail wit...

Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete. ---- With all Lead and Lift Loading and unloading as per the direction of...

Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete. ---- With all Lead and Lift Loading and unloading as per the direction o...

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and o...

Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engin...

Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & ...

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

Providing, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work sit...

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mou...

Retaining wall (Inside) / oHT / UG sump Tanks Providing & Applying Crystalline waterproofing slurry coat RCC structure like Retaining wall, Underground tank. The material having chemical resistance ...

FIRST FLOOR : Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. Th...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For Column form works consider 70%. ---- With all Lead and...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For RCC Beam,Lintels form works consider 60%. ---- With al...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. Chejjas, Canopy & Other Architectural projections of minor ...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For RCC Roof Slabs form works consider 50%. ---- With all ...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) ...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, ...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and remov...

Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup ...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m over and including priming coat of exterior primer applied @ 2.20 kg/10 m) with paint of a...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls at 1.25 L/10 m over and including one coat of ...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Providing fixing of 2track x 2panel sliding windows made out of multi chambered UPVCMatching to RAL9016 sections and with minimum TiO2Titanium Dioxide at 6 PHR with TPE Thermo Plastic Elastomer and l...

Providing fixing of louvered ventilator made out of multi chambered UPVCMatching to RAL9016 sections and with minimum TiO2Titanium Dioxide at 6PHR with TPEThermo Plastic Elastomer and lead free with ...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall b...

Providing and fixing door latch with necessary screws etc complete. Oxidised mild steel door latch ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125mm ---- With all Lead and Lift Loading and unloading as per the direction of engin...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size g...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per draw...

Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in charge. 150 mm length ---- With all Lead and Lift Load...

Providing and fixing door latch with necessary screws etc complete. Bright finished brass latch ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc...

Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms ---- With all Lead and Lift Loading and unloading as per the direction of ...

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitti...

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expan...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing brass bib cock of approved quality : 20 mm nominal bore. ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Providing and fixing brass stop cock of approved quality : 20 mm nominal bore. ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore. ---- With all Lead and Lift Loading and unloading as per the dire...

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :25 mm nominal bore. ---- With all Lead and Lift Loading and unloading as per the direction of enginee...

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :32 mm nominal bore. ---- With all Lead and Lift Loading and unloading as per the direction of enginee...

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore. ---- With all Lead and Lift Loading and unloading as per the direction of engine...

Providing and fixing unplasticised PVC connection pipe with brass unions 45 cm length: 20 mm nominal bore. ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with c...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe ...

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings . This includes jointing of pipes & fittings with one step...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I...

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standar...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval sha...

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail wit...

Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete. ---- With all Lead and Lift Loading and unloading as per the direction of...

Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete. ---- With all Lead and Lift Loading and unloading as per the direction o...

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mou...

SECOND FLOOR : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. ...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For Column form works consider 70%. ---- With all Lead and...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For RCC Beam,Lintels form works consider 60%. ---- With al...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. Chejjas, Canopy & Other Architectural projections of minor ...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For RCC Roof Slabs form works consider 50%. ---- With all ...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyi...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, i...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and remov...

Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup ...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m over and including priming coat of exterior primer applied @ 2.20 kg/10 m) with paint of a...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m over and including one coat of S...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Providing fixing of 2track x 2panel sliding windows made out of multi chambered UPVCMatching to RAL9016 sections and with minimum TiO2Titanium Dioxide at 6 PHR with TPE Thermo Plastic Elastomer and l...

Providing fixing of louvered ventilator made out of multi chambered UPVCMatching to RAL9016 sections and with minimum TiO2Titanium Dioxide at 6PHR with TPEThermo Plastic Elastomer and lead free with ...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size g...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per draw...

Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in charge. 150 mm length ---- With all Lead and Lift Load...

Providing and fixing door latch with necessary screws etc complete. Bright finished brass latch ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc...

Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms ---- With all Lead and Lift Loading and unloading as per the direction of ...

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitti...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mou...

Open Conduit SystemSupplying heavy gauge PVC conduit pipe dia mmthick confirming to IS 2509 with suitable size bends, junctionboxes, adhesive paste etc, and fixing using inverted woodplugs in case of ...

Concealed Conduit System: Supplying heavy gauge PVC conduit pipe 25 mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before c...

Supplying heavy gauge PVC Conduit Pipe 19/20 dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cem...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wir...

Wire: Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealedsystem of wiring with specified...

Wire: Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealedsystem of wiring with specified...

Wire: Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealedsystem of wiring with specified...

Wire: Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealedsystem of wiring with specified...

GI modular box: Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switchplates.The box should be firmly flush mounted after due groove cutting in Brick/Ston...

GI modular box: Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Sto...

GI modular box: Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Sto...

GI modular box: Supplying and flush mounting powder coated/galvanizedmetal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Ston...

GI modular box: Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Sto...

GI modular box: Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Sto...

GI modular box: Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates.The box should be firmlyflush mounted after due groove cutting in Brick/Ston...

GI modular box: Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Sto...

modular Switch Plate: Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complet...

modular Switch Plate Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete...

modular Switch Plate : Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., comple...

modular Switch Plate : Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., comple...

modular Switch Plate : Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., comple...

modular Switch Plate : Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., comple...

modular Switch Plate : Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., comple...

modular Switch Plate : Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., comple...

Modular switch : Supplying and fixing of modular switch & connectedaccessories on existing modular switch plate as per IS 3854and IS 1293.3.6.1)6Amps one way switch. ---- With all Lead and Lift Loadin...

Modular switch :Supplying and fixing of modular switch & connectedaccessories on existing modular switch plate as per IS 3854and IS 1293.3.6.2)6Amps two way switch. ---- With all Lead and Lift Loading...

Modular socket : Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 129 3.3.6.3) 6 Amps 3way socket. ---- With all Lead and Lift Load...

Modularswitch : Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854and IS 129 3.3.6.7) 16A One Way Switcht. ---- With all Lead and Lift Loadi...

Modular socket : Supplying and fixing of modular switch & connectedaccessories on existing modular switch plate as per IS 3854and IS 12933.6.10)6/16A Universal Socket. ---- With all Lead and Lift Load...

Ceiling Rose : Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board. 3.14.5) 6 Amps Ceiling Rose. ---- With all Lead and Lift Loading and unloading as per the ...

Batten Holder : Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board. 3.14.7) 6A Batten Holder ---- With all Lead and Lift Loading and unloading as per the dir...

LED Square Type Fitting : Supplying of recess mounting non integral type LED wluminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs w...

LED Square Type Fitting : Supplying of recess mounting non integral type LED wluminaire comprising of pressure decast/extruded aluminium housing,with spring loaded false ceiling clamps, Power LEDs wi...

LED Tube Fitting : Supplying of feet - PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI Grater then 80. PowerInput: 2...

LED Fitting fixing Charges : Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076” tw...

Supplying of Ceiling Fanwith Capacitorrating As per guideline of BEE5 starrating and IS:374/19 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220V/50Hz, Rated powerup to 35 W 0...

Supplyingwallmountingfansuitabletooperateatsingle-phase230v AC. supply. 400 mm Sweep ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23...

Supplying And Fixing Metal Fan Box with Round Hook. ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854and IS 1293. 3.6.4)Stepped Fan Regulator Two Module. ---- With all Lead and Lift Loading a...

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 48" Sweep(1200mm6.2.1) 12" Sweep (300mm). ---- With all Lead and Lift Loading and ...

Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...

LEDLamps Supplying & fixing of retrofit type LED bulb W with OPAL acrylicdiffuser comprising of LED source with CCT 6500 degree K, CRI Grater then 70%.efficacy Grater then 80 lumen per W, life Grater...

MCB Switches : Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circ...

MCB Switches. Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circu...

MCB Switches : Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circ...

RCCB Switches. Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB)240/450V upto 300mA sensitivity on existing wood/ panel board.5.20.1)16A-25A 2 pole. ---- With all Lead and Lift Loading and ...

RCCB Switches. Supplying, fixing and wiring Residual current circuitbreaker (RCCB) 240/450 V upto 300mA sensitivity on existing wood/ panel board. 5.20.6) 16A-25A 4 pole. ---- With all Lead and Lift L...

MCB distribution boards : Supplying and fixing regular MCB distribution boards on wall/ wood board / flush mounting using required clamps bolts,nuts etc., with provision for fixing suitable type capac...

Earthing : Supplying, fixing, wiring, earth electrode for grounding conduits, I.C.cutouts and other equipments on the meter board using 40 mm dia2.90 mm thick GI pipe 2.5m long buried in a pit . The p...

Guy Wire & GI Wire as per IS-2141 8.02) 8 SWG GI Wire (4.064 mm Dia), Std Wt: 131 Kg/KM. ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

MS box Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover,...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 5...

Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/ FRP/ DMC insulator which a...

MCB Switches.: Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circ...

MCB Switches: Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circu...

SupplyingandfixingMouldedCaseCircuitBreaker(MCCB)overtheexistingwood/panelboardusingnecessaryscrews,bolts,nuts,necessaryphaseseparators,handleandwiringcomplete.ProtectionofOverloadandShortcircuitwitha...

1.1 kV, XLPE or Heat resistant PVCinsulated, PVC exutruted Inner SeathArmoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring stripthickness and resistivity as per IS-39753 2.05) 1.1 ...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. LT Cable 35 to 95 Sqmm ---- With all Lead and Lift Loading and...

Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

SupplyingofSwitchdisconnectorfuseunit(TPN)HRCtype(butwithout HRC fuses). With AC-23A duty and as per IS- 13947.5.8.1)63 A ---- With all Lead and Lift Loading and unloading as per the direction of engi...

Supplying and fixing HRC fuse units base on existing switch /panel board.5.9.2)32 to 63 A. ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

SupplyingandfixingHRCfuselinkonexistingswitchfusebasewithW loss as per IS-13703.5.10.1)upto 63 A ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. 5.38). ---- With all Lead and Lift Loading and unloading as per the directi...

Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.5.34 ---- With all Lead and Lift Loading and unloading as per the direction of engineer...

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with ...

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...

Aluminium End Terminal (Lug)60.05)50 Sqmm ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Brass Cable Gland 63.02)32 mm ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

TELEPHONE & LAN CABLE : Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293...

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 RJ45/I.O Outlet Cat-6 Socket. ...

Supplying and fixing surface/flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in ...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc, complete on the existing ...

Supplying and drawing UTP-CAT 6E LAN cable ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Supplying and drawing PVC flexible two pair telephone unarmoured tinned copper cable. 2Pair. ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Supplying & Fixing of Power strip ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Supplying fixing of Network Switches 16 port 10/100/1000 Switch ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Single I/O ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Supplying & Fixing of ... ms Cat 6 Patch Cable 2 m ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

16 Port 10/100/1000 patch panel ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Supplying and fixing of LED Bulkhead of 10W with IP 65 protection and IK08 impact resistance suitable for surface and wall mounting applications. ---- With all Lead and Lift Loading and unloading as p...

Supply and erection of 9 Mtr RCC Pole including earth work etc,. complete as per the standard technical specification of BESCOM.RCC Pole - 9 Mtr Long, 150 Kg WL Sq Section. ---- With all...

Double Pole TC Set for erection of Transformer on RCC/PSCC 9 Mtr Long Poles as per IS-1977 .For 25/63/100 kVA 4/5 Star Rated Transformer on RCC Pole - 9 Mtr Long, 145 Kg WL - GI ---- With all Lead and...

Supplying and Fixing including all Hardwares etc complete as per the standard technical specification.of BESCOM - 11 kV, 200 Amps Single Break GOS ---- With all Lead and Lift Loading and unloading as ...

Supplying and Fixing H - Frame Set for fixing 11 kV, 200 Amps Single Break GOS - (For DP structure for providing New GOS for sectionalisation) - GI ---- With all Lead and Lift Loading and unloading as...

Supplying and Fixing including all Hardwares etc complete as per the standard technical specification.of BESCOM - 11 kV, HG Fuse Unit with Solid Core Insulator ---- With all Lead and Lift Loading and...

Supplying and Fixing including all Hardwares etc complete as per the standard technical specification of BESCOM. 10 kV, 5 kA Lightning Arrester Polymeric type with GROUND DISCONNECTOR. ---- With al...

PSCC Pole - 9 Mtr Long, 200 Kg WL as per REC Standards ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Supply and fixing of cross arm including all Hardwares complete as per the standard technical specification BESCOM - 11 kV, Horizontal Cross Arm - Galvanised Iron (GI) ---- With all Lead and Lift Lo...

Supplying and Fixing including all Hardwares etc complete as per the standard technical specification BESCOM - HT ST Support 50x8 mm Flat - GI ---- With all Lead and Lift Loading and unloading as per ...

Insulator as per IS-1445 for Ceremic, IS-7935 for GI Pin, IEC-61109 for Polymeric. DISC Insulator 45 kN Porcelain ---- With all Lead and Lift Loading and unloading as per the direction of engineer in ...

Supplying and Fixing …..including all Hardwares etc complete as per the standard technical specification BESCOM - 11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod) ---- With all Le...

Supplying and Fixing including all Hardwares etc complete as per the standard technical specification BESCOM - GUY Set Guy Clamp - GI,Turn Buckle (GI), Anchor Rod using 12 mm rounds/Guy Rod - GI,GI ...

Spiral Earth Electrode ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Supplying and fixing of DANGER / CAUTION board ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complet...

Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014 CABLE ENTRY TYPE,25 kVA, Aluminum Wdg, Star 2 (5 Star) ---- With all Lead and Lift Loading and...

For Distribution Transformer Centre (DTC) MS Box for housing the ETV Meter 3 Phase 4 Wire 5 Amps, with associated LT CT 0.5 Accuracy Class, ring type, with wiring Clamps, B&N and all other accessorie...

LT 3 Phase 4 Wire 5-30 Amps Thread Through Type composite Meter Housing Box consisting of ETV Meter with AMR comply and LTCT with built in GSM/GPRS Modem (as per technical specification) upto 100 kVA ...

Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable ,Up to 4C x 50 Sqmm ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Alkathine tube, Transparent Alkathine tube 19 mm dia, 2 mm thick in coils of 30 Mtr ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Supplyingfixingandwiringearthelectrodeforgroundingoflifts,transformers,DGsetsetc.using40mmdia2.9mmthick2.5mlongGIpipewithGIfunnelwithmeshandsuitablesizereducerfixedonthetopoftheearthelectrode.Thefunne...

GI/Copperstripsforgroundingconnections,usingnecessaryfixingmaterials as required. 25 x 6 mm GI strip ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

LT Protection Kit ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

PVC Wire - 95 Sqmm Al Wt: 25 Kg, Total Wt: 36 Kg/100 Mtr Coil ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

95 Sqmm Copper Terminal, Apprx Wt: 58 Gm ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

PG Clamp Rabbit to Insulated Wire 95 Sqmm ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

For TC Wiring ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

GI Fish Plate ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

GI Barbed Wire 12 SWG ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

ACSR Conductor as per IS-398 (Part - 2/1996),Rabbit ACSR(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

11 kV, 3 Core, XPLE HTUG Cable withpressure extruded inner sheeth, ROUNDWIRE ARMOURED as per IS-7098 (Part-2)Armouring wires dia and Resistivity as perIS-3975 36.01) 95 Sqmm, (54 GI Wires - 2.5 mm Di...

11 kV, Jointing & Cable Termination Kit asper IS-13573 Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable 45.04)Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable 3x95 Sqmm...

1 kV, Jointing & Cable Termination Kit asper IS-13573 Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable45.07)Heat Shrinkable Outdoor Type Cable TerminationKit for XLPE Cable 3x95 Sqmm -...

Miscellaneous Materials 68.06) Cable Covering Tile 125x250x40 mm ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

1.1 kV, XLPE or Heat resistant PVCinsulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring stripthickness and resistivity as per IS-397532.13)1.1 k...

Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing , Hard Soil ---- With all Lead and Lift Loading and unloading as per the direction of en...

Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Erection of 2 Pole Structure using RCC/PSCC Pole 9 to 10 Mtr long ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Digging of Pit for GUY SET ,Hard Soil ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,) ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Erection of H-Frame. ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Fixing of V-Shape/Horizontal cross arm including Single Top Support Brace and Insulator fixing ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT) but us...

Fixing Danger Board ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Fixing DOLO Cutout/Horn Gap Fuse including fixing of cross arm and wiring ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Fixing of GOS including wiring (11 kV Single Break 200 Amps) ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Fixing of 3 Nos Lightning Arrestor including wiring ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. LT Cable, 35 to 95 Sqmm (3.5/4 Core) ---- With all Lead and Li...

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

Fixing of LT Protection Kit ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Wiring of 1 Circuit of LT Wiring for for 25/63/100 kVA DTC to the existing LT protection Kit/Distribution Box via metering box. (includes fixing of necessary supports like 2 Pin cross arm, Spacer etc...

Fixing Metering Box for housing the ETV Meter 3 Phase 4 Wire along with CT's, Meter & wiring for DTC, 25/63 kVA TC ---- With all Lead and Lift Loading and unloading as per the direction of engineer in...

Erection of 25 to 63 kVA Transformer on Transformer Structure ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Stringing of conductor Rabbit ACSR, binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps. ---- With all Lead and Lift Loading and unloading as p...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff HT Cable 21.01) 3x95 to 150 Sqmm ---- With all Lead and Lift Lo...

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

Cable Joint and wiring (for HT & LT UG Cable) HT UG Cable Heat shrinkable Straight Through Joint 22.01) 3x95 to 3x240 Sqmm ---- With all Lead and Lift Loading and unloading as per the direction of e...

Making and Fixing pot head for HT Cable onlyHeat shrinkable type 22.04) 3x95 to 3x150 Sqmm ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Covering the cable with tile ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge